Loading…
Loading…
Tender Value
₹6.7 L
EMD Value
₹7,000
Closing Date
11 Jun 2026, 6:00 pm6d left
dharmesh g. rajyaguru (Executive Engineer)
Construction of 70,000 lit. Capacity and 2 mtr. Plinth height cistern and Lowering, Laying & Jointing of 90 mm dia. HDPE Pipe line for Ishwariya Village water supply scheme. Under ATVT Progemme.” (third Attempt)
309646
13/2026-27 (third attempt)
Open
Water Supply/ Sanitation Works
Jamnagar
6 documents required · 6 mandatory
₹900
Executive Engineer, Public Health Works Division Jamnagar
₹7,000
29 May 2026
29 May 2026
29 May 2026
11 Jun 2026
29 May 2026
Name of work :-Construction of 70,000 lit. Capacity and 2 mtr. Plinth height cistern and Lowering, Laying &
Jointing of 90 mm dia. HDPE Pipe line for Ishwariya Village water supply scheme. Under ATVT Progemme.
QTY Unit DISCRIPTION OF ITEM RATE PER AMOUNT
Excavation for foundation up to 1.50 mt depth including sorting out and stacking of useful materials and disposing of the
excavated stuff up to 50 mt leadProviding and laying cement concrete 1:3:6 ( 1-Cement : 3 - Coarse Sand : 6 - Hand broken
stone aggregates 40 mm nominal size ) and curing complete excluding cost of fom work in foundationProviding and laying
cement concrete 1:3:6 ( 1-Cement : 4 - Coarse Sand : 8 - Hand broken stone aggregates 40 mm nominal size ) and curing
complete excluding cost of fom work in plinth fillingUncourse Rubble Masonary with hard stone of approved quality in
foundations and plinth in cement mortar 1:6 ( 1-cement : 6-course sand ) including levelling up etc. completeProviding &
cast in situ C.C.in grade M-300 using granite, quartizite trap metal of size 12 mm to 20 mm & or 6mm to 12 mm incl.
Scaffolding, centering, formwork, needle vibrated consolidation, curring & hydrulic test etc. comp. ( excl. cost of
reinforcement ) up to 6 mt height from Av GL Supplying, cutting, bending, binding and placing in position steel as per plan
and design and as per ISS 2502 incl. Cost of steel and binding wire for reservoir only including lift up to 6.0 mts. Height.
Using deformed ( tmt ) bars or for steel confirming to ISS Fe- 415Brickwork using common burnt clay buildingbricks having
crushing strenth not less than 35 kg / sq cm in foundation and plinth in cement mortar 1:6 ( 1-cement : 6-fine sand ) ---
ConventionalCement plaster 20 mm thick in C.M.1:2 using water proofing compound of approved quality incl. Finishing etc.
comp. Providing 20 mm thick cement plaster in single coat on on single on half brick walls for interior plastering up to floor
two level and finished even and smooth in Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (
Medium grade ) of the following nominal bore, tube fitting and clamps including making good the wall, ceiling and
floorProviding CI cowl type ventilator with air filter and jali etc comp. Fixing C.I cowl type vantilator in C.C.1:2:4 with bolts &
nuts etc comp.. Including cost of jointing materials 100 mm diaProviding & Suppling ISI mark CI D\F sluice valves, butterfly
valves & reflux valves of following class & dia incl. All taxes, insurance, transportation, freight, octroi, ispection charges,
loading, unloading, conveyances to deppartment store stacking etc complete. Sluice Valve with ISI MarkLowering,lating and
jointing in position following C. I. D/F Reflux valves, Butterfly valves, Sluice valve and Air valves including cost of labour,
jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete 80 mm DiaSupplying at store or
site of work misc. water works hardware incl. Freight, insurance taxesetc complete.Fixing all type of C.I. frame and cover
in C.C. 1:2:4 incl. Carting etc comp.Providing and fixing 50cm.wide MS ladder fabricated from M.S. flats 10mm X 60mm
with 20 mm dia. Steel bar steps at 30 cm C/C. The item includes stays of 10mm X 50mm flats & fixing at 3 mts C/C.
Applying any approved quality of cement paint in three coat including primer coat and cleaning washing complete.
1.00 No. 70000 Lit. RCC Cistern 605553.15 No.
Providing and supplying in standard length ISI mark high density
Polyethylene H.D.P.E. Pipes suitable for potable water, as per IS
specification no. 4984/1995 including all local and central taxes,
tranportation, freight, charges, octroi, inspection charges, loading,
unloading, conveyance to the departmental stores etc. complete.
150.00 Rmt 90 mm dia HDPE pipeline 6 Kg/cm2 167.00 Rmt
Providing & supplying ISI mark CI / D/F Sluice valve, butterfly valves
& Refle valves of following clas and diameter including all taxes,
insurance, trasportation, freigh charges, octroi, inspection charges,
loading, unloading, convenyance to departmental stores, stacking
1.00 No (I)Sluice Valve PN-1- 80 MM DIA.(PD type short body) 2652.00 No
Excavation for pipeline trenches incl. all safety provision using site
rails & stacking excavated stuff up to a lead of 90 M,clearing the site
etc comp.for lifts & strata as spcified
0.00 Cum A. in all sorts of soil and soft murrum @ 30 % 89.00 Cum
0.00 Cum B.inhard murrum,boulders incl.Macadam road @ 30% 135.00 Cum
18.00 Cum C.in soft rock and/or masonary in C.M./L.M.@ 40 % 163.00 Cum
QTY Unit DISCRIPTION OF ITEM RATE PER AMOUNT
D.in hard rock and/or in c.c.1:2:4 or RCC with blasting and Cum
27.00 Cum chiselling @ 60 %
Lowering laying and jointing HDPE pipes and specials of following
class and diameters( By butt fusion welding method) including cost
of conveyance from stores to site of worksat all level including cost
of labour,material, giving satisfactory hydraulic testing as per ISI
code, etc. complete
150.00 Rmt 90 mm dia HDPE pipeline 6 Kg/cm2 7.00 Rmt
Lowering, laying, and jointing in position following C.I. / D/F Reflux
valves, Butterfly valves, sluice valves and Air valves including cost
nof all labour, jointing material, including nut bolts and giving
satisfactory hydralic testing etc. complete. ( Rate for all cass of
1.00 No (I)Sluice Valve PN-1- 80 MM DIA.(PD type short body) 400.00 No
Providing C.C.M-100 for Encasing pipes using trap metal size
mm to 50 mm incl. Form work curing consolidation etc. comp.
5.531 Cum using trap metal 20 mm nominal size 4113.87 Cum
Refilling the pipe line trenches with excavated stuff incl. Ramming Cum
proper consolidating disposal surplus stuff or directed with in a
38.515 Cum radious of 3 Km
I am/We are willing to carry out the work at( --------) % above /below -------%(shoud be written in figure
words ) ------------------------------below/ above tender
I am/We are willing to carry out the work at( ------) % above /below --------%(shoud be written in figure
words ) ------------------------------below/ above tender
works put as under
Estimeted cost put to tender Rs.-------------
Estimeted cost put to tender Rs.-------------
Total Rs.--------------- In words------------
Deputy Executive Engineer
P.H.S. Sub Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
sch A.pdf
sch b.pdf
tech bid.pdf
tech spe.pdf
price bid.pdf
drawing.pdf
gcc.pdf
Vol II GCC Part - 2.pdf
Download all tender documents and submit your bid