PROVN OF 10 X WC TOILET OF 883 TN BN ASC, BOUNDARY WALL INFRONT OF T-102 IN OFFRS MESS JRC AND SHED CONNECTING LIVING LINE OF WOMEN MILITARY POLICE AT BLDG NO P-10/09 AT UB AREA PRO UNIT UNDER GE (W) BAREILLY.

Amount

Surface exscavation n.exc 30 cm deep and avaraging 15cm deep and getting out in soft /loose soil.

Add to (or deduct from) last item for every 3 cm or part thereof above or below 15cm average depth.

Excavation in trenches n.exc 1.5m wide and 1.5m deep for foundation etc in soft/loose soil and getting out all as spd.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, sub base and mass concrete.

M&L Brick work with fly ash bricks ,old size brick straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed

M&L Brick work with fly ash bricks ,old size brick straight or curved on plan exceeding 6 M mean radius built in CM 1:4 complete all as specified and directed

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including necessary scaffolding or Jhula complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement including necessary scaffolding or Jhula complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement

Supply only integral water proofing compound.

M&L white washing two coats to ceiling surfaces including preparation of newly plastered untreated surfaces all as spd and directed

M & L applying two coats of cement based paint on newly plastered orer a coat of primmer unplastered wall surface including preparation of surfaces, complete all as specified.

M&L white washing two coats to wall surfaces including preparation of newly plastered untreated surfaces all as spd and directed

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Treating the top surface of field earth at the rate of 5 litres of emlusion per sqm of surface area

M&L for Treating the soil under plinth protection at the rate of 5 litres of emlusion per sqm of surface area

M&L for Treating the soil alongwith external perimeter

M&L for RCC M 25 design mix concretes mechanically crushed stone aggregate as in RCC slabs shelves roof proj/drops/chajjas etc all as spd.

M&L for RCC M 25 design mix concretes mechanically crushed stone aggregate as in RCC slabs shelves in col, beams, cantilevers, lintels over 1.50m spam etc all as spd.

Providing cement concrete 1:2:4 type B-I (using 20mm graded stone aggregate as in lintels up to 1.50 mtr clean span, cills siesmic and other similar bands, plinth courses, coping, bed plates and the like including weathering slightly rounded or chemfered angles and throating as directed.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

Mild steel TMT bars 5 to 8 mm dia and over cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

Form work to soffits of suspended slabs such as roof slab, floor slab and similar work n.exc 200mm thick with rough finished flat surfaces.

Form work to roofs, chhajjas, trough and similar items including edges with rough finished flat surfaces of concrete.

Form work to sides and soffits of floor or roof beams haunching, lintels, cantilever shelves including supported over hangs etc. with rough finished flat surfaces of concrete.

S & F steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S & F steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded

S&F framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290. Gde-E-165

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

S & F Non skid ceramic coloured tiles7 mm to 8mm thick (square /rectangular )area of each tiles exceeding 0.11sqm but n . Exc 0.18 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:6 .

S&F coloured granite (of any type) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing after roughing to surfaces and applying screed bed of 10mm thick of cement mortar 1:3 complete all as specified and directed.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :-

(a) Prepartion of RCC foof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed.

(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.

M & L for solar reflective bitumens aluminium paint @ 0.10 Kg per Sqm over membrance surfaces as in roof treatment complete all as specified and directed.

M&L providing "RAJSHRI" BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick RAJSRI brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm

S & F 100mm stainless steel butt hinges.Make : Grag

S & F 150mm length extruded aluminium alloy handles, fabricated type, anodised.

S&F 150mm length aluminium anodised barrel tower bolt of extruded section.

S&F sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc

M&L 75mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded stone aggegate) as in plinth protection finished even and smooth without using extra cement ( laid in alternate bags).

M&L for salt-glazed stoneware gully traps,150x150 square or round mouthed, type "P"

Concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified

M&L for 150 mm dia Reinforced concrete pipes, class NP2 laid in trenches and jointed complete with collars as specified

Returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 150mm dia complete

Removing excavated soils n.exc 50mtrs and depositing where directed at a level n.exc 1.50m above the starting point.

S&F Rotional moulded polythene water storage tanks (cylendrical vertical with closet top) hoisted and fixed in position all as spd in SSR Part-I 500 ltr capacity.

S&F 20 GI Tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floor or trenchs etc.

S&F 15 GI Tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floor or trenchs etc.

S&F stop valves cast copper(CP) alloy, screwed down high pressure with crutch or butterfly handle scrwed both ends for iron pipes or for unions and fixed bore pipe 20mm.

S&F stop valves cast copper(CP) alloy, screwed down high pressure with crutch or butterfly handle scrwed both ends for iron pipes or for unions and fixed bore pipe 15 mm.

S&F fancy type chromium plated angle valve with flange 15mm size Make: Jaguar/EssEss.

S&F Bib tap long nose with flange cast copper alloy chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed (15mm size) Make Jaguar/Ess Ess.

S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.

Supply & fixing vitreous china wash down water closet pan pedestal patern white /coloured including CP EWC Jet with seat cover Complete and taking down old seat fixing bolt flush pipe complete all as spd and directed by Engineer -in- charge.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs 6 x 6 inches ultra slim shower head with 12 inches arm of Chromium plated brass for fixing 15 mm pipe with bend of 45 degree with flange complete all as specified and directed.

S&F for 6mm thick looking mirror fixed on 12mm thick marine plywood with powercoated aluminium frame alround the mirror including mounted on wall size 1.50x.60 complete all as specified and directed.

S & F urinal valve auto closing system with built in control cock & wall flange valve 15 mm bore including urinal sperader of CP complete all as specified and directed Make jaquar or equivalent Cat no PRS-077.

S & F vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe.

M&L for Marble works 16 to 18mm thick Green marble machine cut and machine polished,and moulding, one side green marble, over/jambs of doors/ window cills,and urinal partition wash basin platforms and flooring,skirting/dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble

S&Ffancy type viteous china counter top, wash hand basin, "OVAL" shaped,white of size 550x400mm including bottle traps and piller cock with green marble inserted in 18 mm thick mounted green marble stone slab platform by cutting on oval shaped etccompleted all as specified and directed .(Green marble cutting shall be measured and paid separately) Make cera,parryware

Extra over for cutting and moulding of green marble in oval shaped to accommodate WHB of size 550x400mm all as directed by EIC

S&F Brass CP piller cock water fall down for iron pipe and fixed bore of pipe 15mm. Make: Jaguar/Ess Ess.

S&F PVC (SWR) pipes single socketd in any length with rubber ring joints laid in trenches or in floor 110mm bore or fixed to walls.

S&F PVC (SWR) pipes single socketd in any length with rubber ring joints laid in trenches or in floor 75mm bore or fixed to walls.

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC (SWR) bends any radius 100mm bore.

S&F PVC (SWR) junction single or double equal or unequal 75mm bore.

S&F PVC (SWR) junction single or double equal or unequal 100mm bore.

S&F PVC (SWR) vent cowl 75mm.

M&L PVC (SWR) floor trap plain with grating including jointing with solvent 75mm dia of contilent.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm dia of contilent.

M&L PVC (SWR) gully trap 125/100mm setting and jointing with solvent cement.

S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls.

M&L for hard core of stone not exc 63 mm guage spread, levelled in layers not exc 150mm watering and well ramming to true surfaces complete.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L for 30X30cm providing precast cement concrete rubber moulded chequered coloured tiles 25 mm thick even finished on top of approved design and pattern complete all as specified and directed screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

M & L for construction of septic tank for 50 Users capacity using sub class B bricks old size, with and including necessary excavation earth work, brick work, concrete work, plastering, returning filling in soft/ loose soil and removal of surplus soil to a distance n exc 50 Mtrs etc complete all as shown in typical drawings No TD/217 sheet 1/7 to 7/7 complete all as spd and directed

M & L for construction of Soak well 1.80 mtrs dia and 3 mtrs effective depth with and including necessary excavation earth work, brick work, concrete work, plastering,filling with brick bats, PCC on top returning filling in soft/ loose soil and removal of surplus soil to a distance n exc 50 Mtrs etc complete all as shown in typical drawings No TD/309 sheet 1/4 to 4/4 complete all as spd and directed

M&L for Form work to sides of pillars, struts, columns and stanchions and similar work square, rectangular rough finished surfaces of concrete all as spd and directed.

Excavation in post holes (or similar holes ) each n exc 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface in hard and dense soil.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate )in fdn filling .

S&F steel work in tubular roof trusses, purlin inluding special shaped washer etc. complate using ERW or induction butt welded tubes confiorming to I S.1161-1979 grade St-240.

S&F plates (plain or chequered) channela, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etcGDE Fe410-o- or Fe 310-0 all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection ,path,finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 150mm long 100mm wide and 350mm deep in PCC 1:2:4 type B-0 using 12.5 mm grade stone aggregate, jointed in CM 1:4 complete all as specified and directed.

S & F for verified ceramic coloured tiles 10 mm (square /rectangular )area of each tiles not exceeding 0.36 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:6 .including dismantling floor, hearth or wall tiling including cement mortar bedding

S & F for verified ceramic coloured tiles 10 mm (square /rectangular )area of each tiles not exceeding 0.36 sqm superior premium quality, grade B-1 as per IS in Water splashing vertical surface etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 10 mm thick screed bed or bedding layer in cement mortar 1:4 .including dismantling floor, hearth or wall tiling including cement mortar bedding

M&L for PCC 1:2:4 type B-I using 20mm graded mechanically crushed stone aggregate as in surface channels finished even and smooth using extra cement complete all as spd.

Extra for forming fair finished drain or channels 30cm in girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as spd.

Extra for forming fair finished drain or channels 25 cm in girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as spd.

M&L for form work to sides of concrete foundations footings, bases of columns beams sides and soffits (if any) of foundation and plinth beam and similar work vertical rough surfaces of concrete (horizontal or sloping) all as spd and directed.

M&L Providing reinforced cement concrete M25 as in foundatio, including rafts, footing, foundation beams plinth beams, bases for columns etc all as spd and directed.

M&L for RCC M25 as in columns, pillars, post and struts etc complete all as specified and directed. (Rainforcement shall be measured and paid separately.

M&L for frame work such as Iron gate orianenetal pattern grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed gurad brs, barred iron doors, ladders, framed balusters, walk ways, railing, angle iron for post frame work of watertanks and similar work conforming to Fe-290. Gde E-165 gates, including pintle hinges, stops, hand-made sliding bolts etc.

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as specified and directed.

S&F plates (plain or chequered) channela, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etcGDE Fe410-o- or Fe 310-0 all as specified and directed.

S&F PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS Screws through the grrove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A strip of 5mm thick PVC sheet of width 75mm featherd at edges & partition in c/c both side horizontally and vertically shall be stuck at the places where two panels are joined, using solvent cement Complete as per direction of Engr-in-Charge.( Note: Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.

M & L preparing wood or wood based on old surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Stainless steel curtain rod 25 mm dia 1.6 mm thick of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified.

M&L for preparing Old plastered surfaces of walls and applying one OBD on walls including complete removing of existing treatement all as specified and directed.

M & L applying two coat of distemper oil emulsion white or tinted on new decorated or undecorated wall surfaces complete all as specified.

M&L for applying 3 mm thick layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

S & F in repairs 4mm thick E-Board tiles (Everest or equivalent) for insulation and acoustic purpose of size 600x 600mm fixed with and including GI snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 2mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for virified ceramic Dark shade coloured tiles 10 mm thick (Square/rectangular) area of each tile 1200x600x10mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

Ditto but in vertical surfaces including 10 mm thick backing coat or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed.

S& F for glazed powder coated aluminium door frame,pattition wall with side hung shutter and glazing fixed with and including 4.8mm th tinted glass /12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels incl securing with 'U' channels at top joining partition with all aluminum necessary jointing cleat and 20 mm glazing clips rubber packing, anodized alumium fitted and maring good of wall surfaces with matching to existing surface compete all as specified and directed :- (a)Frame 100x44x1.48mm thick with rawl plug (b)Middle and lock rail :150x44x1.48mm thick (c)Bottom rail :150x44x1.48mm thick (d) Top rail/stiles :85x44x1.48mm thick (e)Aluminum beading : 0.70mm thick (f)Aluminium handle 'D' type 150mm long,alumium tower bolt 9.90mm dia shoot 200mm long, Mortice lock :100mm size 4 lever, aluminium sliding bolt : 300 mm long, aluminium floor mounted door spring.

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination with aluminium frame work complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet single peace 755X365X655 trap distanace 300 mm and built with cisten white complete, including slow slow fallling sheat cover connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed Cat no LYS.WHT-0204Jaquar.

S&F in repair sensotronic sensor flushing valve for urinal complete kit complete all as specified and directed . Make - Jaquar (SNR-CHR-51097)

S&F in repairs centre hole single lever basin mixturewith popup waste system with 450 mm long branded hoses, chromium plated complete all as specified and directed. Cat no FUS -29051B Jaquar

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.CAT NO ARI:-39053 Jaquar.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. Cat no ;-LYR:-38037 Jaquar

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.cat no ALD-573 jaquar.

S&F in PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

M& L in CP Brass towel rail 600mm long with lower hangers and fixed with brass screws Cat No Jaquar CAN-1181N Jaquar complete all as specifeed and directed .

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S&F of soap disk type fixed to plug with cp brass screws complete all as spd and directed cat no AKP -35731 P Jaquar.

S&F of toilet roll holder type fixed to plug with cp brass screws complete all as spd and directed cat no AKP-35753P Jaquar.

S&F in of glass corner selfs with brackets with railling and complete all as specified and directed.cat No CAN;-1173 Jaquar.complete all as specified .

S&F Brass CP piller cock fancy type for iron pipe and fixed bore of pipe 15mm.

M&L Machine pressed precast concrete interlocking paver block any colour, shape and size conforming to IS_15658-2006 of 60mm thick, M-35 Grade with grey cement and pigment over a layer 100 mm thick PCC 1:4:8, type D-2 with using 40mm graded stone aggregate as in sub base of floors is laid over and including 25 mm thick sand cushioning of existing PCC surface all as specified and as directed by Engr-in-charge

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

All as per item 132 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

S&F socket out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F switch piano flush type 15 Amp single pole one way.

Taking down submain wiring and cables including all accessories complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. Model-BCLST 20W LED of Make- BAJAJ or eqvlt in Philips/ Havells.

S&F 2'x 2' LED recess/ surface mounted fitting 36 Watt, 230V, with integrated electronic driver high transcluent frosted diffuser, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F MCB SPN 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B6-32 of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Supply & Fixing security light fitting, LED type, 25 watt, 6000 k pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic dives complet with M&L GI pipe mounting bracket of size 25/32 mm ida and 1.20 m long fixed to wall with and including nut bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connected with three core 23/.0076 rubber insluated copper cable from ceiling rose to connected of street light complete all as specified and directed Model - BCLST 25W LED of Make BAJAJ or eqvlt in Phillips / Havells.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with innder sheathing of PVC tape and overall PVC sheathed in service connectious suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat of size 10 sqmm all as specified.

Supply fixing and testing exhaust fan of size 300 mm, 230V AC type of Make- Havells / Cromption / Surya complete all as specified and directed by Engr-in-Charge

Supply fixing and testing exhaust fan of size 300 mm, 230V AC type of Make- Havells / Cromption / Surya complete all as specified and directed by Engr-in-Charge

TRISHOOL ASSOCIATE

novell engineers

Mohit Enterprises

vipul nagaich

M/S Harshri Nath Enterprises