Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface

smooth including necessary repairs to scratches complete.

Applying two coats of Birla Or Asian acrylic lapi (putty) & two coats of primer approved brand and

2 manufacture on new wall surface to give an even shade including throughly brushing the surface free 500.00 SMT. 40.19

from mortar dropping and other foreign matter and sand papered smooth

Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.(tractor emulsion & equivalent)

Wall painting two coats with weather proof acralic emulsion APEX type paint of approved brand &

manufacture and of required shade on exterior wall surface to give an even shade over and including a

4 primery coat with alkaly resistance primer of approved brand after throughly brushing surface to 560.00 SMT. 73.02

remove all dirt and remains of loose powdered materials etc comp. for all height.

Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.)

Painting two coats (Excluding priming coat) on previously painted steel and other metal surface with

6 enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other 190.00 SMT. 114.24

foreign matter.

Painting two coats (including priming coat) on New steel and other metal surface with enamel paint,

7 brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 20.00 SMT. 127.76

Painting two coats (Excluding priming coat) on previously painted wood and wood based surface with

8 enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. 15.00 SMT. 114.55

Polishing with french polish on previously polished wood an wood based surface to give an even surface

9 including cleaning the surface of all dirt, dust and sand papered smooth including a coat of wood filler. 15.00 SMT. 70.96

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including

10 stacking of serviceable material anddisposal of unserviceable from site of work with all lead and lift 20.00 SMT. 19.72

Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift

Dismentalling tiles or stone floors laid in mortar including stacking of serviceable materials and disposal

of unserviceable materials with all lead and lift.

Dismentalling doors, windows, ventilators, etc. (Wood or steel shutters including chowkhars, Architraves,

13 Holdfasts and other attachment etc. complete and stacking them within all lead and lift.1. Not exceeding 15.00 Each 189.95

3 Sq.M. in area

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking

the materials with all lead and lift ( for any dia, of pipe)

Dismentalling sanitary fittings like wash basin, W.C. pan, indian and European type flushing tank etc.

includingstacking the materials with all lead and lift.

Providing & fixing wash basin of CERA make with single hole for pillar tap with C.I. or M.S. brackets

16 painted white including cutting holes & making good the same but excluding fittings. Vitreous China Flat 3.00 Each 1504.46

back of size 550mm. X 400mm. In colour.

Providing and fixing Kitchen sink with C.I. Or M.S. brakets painted white including cutting holes in walls

and making good the same but excluding fittings :(I) 600mm x 450mm x 150mm size

18 Providing & fixing C.P. brass waste for wash basin or sink (B) 40mm. Dia. 7.00 Each 88.94

Providing, Erecting & Fixing ready made double coated sintex P.V.C. (ISI) or equivalent ISI water storage

tank of required capacity each with cover including providing & fixing one 20mm.dia. float valve

19 ball‑cock , one 20mm dia. G.I. Waste pipe with plug, one 25mm dia. G.I. over flow pipe of length up to 3000.00 Litre 3.91

0.30mt. including making all connection for inlet/outlet supply with necessary fittings etc. complete on

Providing & fixing of box rimless pattern wall mounted cantilever type white/coloured vitreous china

European water closet including flushing cistern with C.P bolts, nuts, CI chair (painted with two coats of

enamel paint over a coat of primer) or other hanging arrangements, bakelite / poly propylene soft

closing seat cover with C.P. hinges & rubber buffers, connector pipe from P/S trap to drainage pipe,

20 brided hose pipe complete with all accessories. Including cutting & making good the walls & floors 3.00 Each 10895.00

wherever required. The scope include the items as per specifications and product details as under: EWC-

P:- WALL MOUNTED CERA CAT NO: S1043168 P.25 (CHANTER with slim soft close seat cover)+ Cistern

Half Frame Cat No. B1130102 (CHEVRON) P. 32 + Knob Cat No B1120105 P. 32 OR EQ

Providing & Fixing 600X450mm. Bevelled edge mirror fixed to wooden plug with C.P. Brass screws.

Providing & Fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P.

brass screws. 600mm x 20mm size.

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Providing & fixing PVC SWR Nahani trap IS 14735 for drain - 100 mm diameter with jali of the following

23 nominal diameter of self cleanising design with C.I. screw down or hinged grating including cost of 9.00 Each 580.79

cutting & making good the walls and floor ( 100mm. Inlet and 50mm. Outlet)

Providing & Fixing PVC Gully trap with C.I. grating brick masonary chamber & water tight C.I. cover with

24 frame of 300mm X 300mm.size inside with standard weight. (i) Square mouth trap (B) 160mm. X 5.00 Each 1234.57

110mm. size P or R type.

Providing of hand spray /Health faucet for european w/c of approved make with all necessary fastners

with wall hook for holding & 1mtr long Ssbraided connection pipe as directed by EIC

Providing & Fixing white / coloured porcelain flat back wall type URINAL PAN of CERA make having size

350 * 340 *615 mm of approved quality & make including waste coupling (Full Threded) bends &

necessary outlet of 25mm.dia. G.I. Pipe connections including providing Bottle Tarp, brass stop cock

(pillar cock type), PVC connection,spreader & spreader pipes,brackets etc., completed as directed by

E.I.C. Cera Cat No : S4020113, (CIVIC Urinal)+ WASTE COUPLING: CERA ALD-F8050101 or EQ PAGE

Providing & fixing pillar tap capstan head, screw down high pressure with screws, shanks and back nuts.

Providing & Fixing Screw down bib taps of following size (B) Brass chromium plated screw down bib tap

29 Providing & fixing brass screw down stop tap (A) 15mm. Dia. 8.00 Each 203.79

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 25mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(A) 40mm dia.

Providing & fixing submersible pump having 1.00 HP motor of ISI brand of CRI/Lubi or equivalent with all

33 G.I. fittings for inlet & outlet connection with electrical pannal, require cable etc complete as directed. 1.00 Each 8000.00

34 Cleaning of septick tank 1.00 Each 1500.00

Providing. Laying and jointing in true line & level 15 mm dia. U.P.V.C. pipe (Sch 40) for cold water in

ground OR on wall including fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be

concelled as directed including necessary fittings etc and fixing the same with adhesive solvent including

testing of pipe & joints including cost of all materials etc complete.

Providing. Laying and jointing in true line & level 25 mm dia. U.P.V.C. pipe (Sch 40) for cold water in

ground OR on wall including fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be

concelled as directed including necessary fittings etc and fixing the same with adhesive solvent including

testing of pipe & joints including cost of all materials etc complete.

Providing. Laying and jointing in true line & level 40 mm dia. U.P.V.C. pipe (Sch 40) for cold water in

ground OR on wall including fittings of make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by EIC. pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall be

concelled as directed including necessary fittings etc and fixing the same with adhesive solvent including

testing of pipe & joints including cost of all materials etc complete.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the

39 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. 75.00 RMT 335.69

including making good the wall ceiling and floor.(G)110 mm

Constructing brick masonary chamber for underground C.I Inspection chamber and bends with bricks

having crushing stregth no less then 35 kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 445 mm x

610 mm internal dimensions total weight of cover with frame to be not less than 38 kg (wt. or cover

kg. and wt of frame 15 kg) R.C.C.top slab with 1: 2 : 4 mix (1 Cement :2 coarese sand : 4 grade stone

aggregate 20 mm size) foundation concrete 1 : 5 : 10 inside plaster 15 mm thick with cement mortar 1 :

finished smooth with a floating coat of neat cement on walls and bed concerete etc. complete.

i) Inside dimensions 455 mm x 610 mm x 450 mm deep for single pipeline

Extra over above item for every additional depth of 0.1 mt. of part thereof beyond 450 mm depth for

Brick masonry chamber (i) 455 mm x 610 mm size.

42 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 4.00 Each 948.68

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised aluminium entrance door

using extruded section fabricated by standard manufactures with framing 10.15cm x4.45cm rectangular

section with minimum Thickness 1.95mm & door shutter made from 10.15 cm x 4.45cm aluminium top

/ bottom section,Lock rail mimimum 15.0cmx4.45cm & vertical section 4.70 x 4.45 cm size with

minimum Thickness 1.95mm using 5.5mm thick "Triveni"or HB4 smoke glass with glazing deep rubber

gasket with locking arrangement(Godrej type) with all fixtures & fastenings of anodised section with

aluminium bedding, hydraulic door closer with all labours & materials etc. Complete as per drawing and

as directed by E.I.C..Item also includes powder coating to alluminium sections of approved colour / shade

incl. all materials,labour,tools & tackles etc. complete.

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised aluminium entrance door

using extruded section fabricated by standard manufactures with framing 10.15cm x4.45cm rectangular

section with minimum Thickness 1.95mm & door shutter made from 10.15 cm x 4.45cm aluminium top

/ bottom section,Lock rail mimimum 15.0cmx4.45cm & vertical section 4.70 x 4.45 cm size with

minimum Thickness 1.95mm using 5.0mm thick "Triveni"or HB4 smoke glass with glazing deep rubber

gasket with locking arrangement(Godrej type) with all fixtures & fastenings of anodised section with

aluminium bedding floor spring mounted door closer with all labours & materials etc. Complete as per

drawing and as directed by E.I.C..Item also includes powder coating to alluminium sections of approved

colour / shade incl. all materials,labour,tools & tackles etc. complete.

Providing and fixing window having extruded alluminum colour anodized section frame main outer size

63.5 x 38.10 x 1.95mm (of Jindal Section no4605,@ wt 1.094 Kg/Rmt), horizantal two track member size

61.85mm x 31.75 mm x 1.20mm (of Jindal section no 8687 @ wt of 0.695kg/Rmt), vertical memberof size

61.85mm x 31.75mm x 1.30mm (of jindal section no 8758 @ wt of 0.659kg/mt) with sliding shutter of

horizantal member size 40mm x 18mm x 1.29mm (of jindal section no 8949 @ wt of 0.456kg/Rmt),

vertical member of size 40mm x 18mm x 1.29mm (of jindal section of 8947 @ wt of 0.456kg/mt, section

8948 @ wt of 0.457kg/mt) with 5mm thick transparent bronze colour tinted float glass with powder

coated alluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete (For two track window).

Providing and fixing standard extruded alluminum section of size 63mm x 38.10mm x 1.2mm (of Jindal

Section no. 2434,@ Wt. 0.643 Kg/Rmt) with colour powder coated alluminium frame for ventilation with

5mm thick frosted glass as per details etc complete for louvered glass Ventilation.

47 Providing of hydralic door closer for alluminium door as & when required. 5.00 Each 474.58

48 Pro.& Fixing S.S.Aldrop 20Cm longof ASIS 304 5.00 Each 216.10

49 Pro.& fixing Mortice lock cover Godhrej on Aluminium door of Store room of OFFICE BUILDING 5.00 Each 326.27

Providing &Fixing of S.S. letter of height 12", width 1", with s.s. of jindal material incl all acessries as

directed by EIC.

Providing & laying coloured glazed tiles 6mm. Thick in flooring, treads of steps & landing laid on a bed of

51 12mm. Thick cement mortar (1:3) (1 cement : 3 coarse sand finished with flush pointing in white cement. 20.00 SMT. 941.12

Providing & laying coloured glazed tiles of size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm /

52 bigger than size shown in skirting, risers of steps & dedo on 10mm thick cement plaster 1:3 (1 cement : 3 20.00 SMT. 1473.15

coarse sand) and jointed with white cement slurry

Providing and laying 24" x24" Vetrified 8 mm thick tiles in flooring, skirting etc. laid on a Bed of 20 mm.

Thick cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with colour & white cement slurry

including finished with flush pointing and cleaning the surface etc complete. (Double Charge & Light

Providing and laying Black granite for entrance steps,water counter etc. flooring over 20 mm. (average)

54 base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 and jointed with grey cement slurry 5.00 SMT. 4454.67

including rubbing and polishing complete.

Labour charges for making moulding edge to granite incl. all tools,tackles etc. complete as

directed.approved by Engineer-in-Charge.granite moulding

Providing & laying POLISHED KOTAH STONE slab flooring over 20mm. (average) thick base of cement

mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and jointed with grey cement slurry

including rubbing & polishing etc.. Complete. a) 25mm. Thick ( 600 X 450mm. Size )

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for

termite control treatment including labour and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per

Providing and fixing curtain (Cotton fabrics of rate of Rs. 400 per sqmtr + suppot cotton cloth) with

Aluminum rod of dia 40 to 50mm dia with SS rings

Providing and fixing pre-cast Rubber Dye/steel Dye inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to

59 IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and 230.00 SMT. 699.93

level as per guidlines of IRC : SP 63-2018 etc.Complete.

Providing & fixing precast concrete kerb stone of grey cement based concrete block having size 30 cm

length *30 cm height *15 cm thick of M-250 grade concrete as per approved design & including

excavation for fixing in proper line and level, filling the joints with C.M. 1 : 3 ( 1 Cement : 3 fine sand ) etc

complete as directed

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with cement and sand

slurry 1:3 (1-cement 3-sand ) (upto 10 ton)

62 Providing unskilled labour for movment of obstracted material during Renovation works. 50.00 day 487.00

63 Labour charges - Plumber (Fitter) & Mistry 30.00 Each 766.00

Providing and construction SOAK WELL of 3.0 mt internal dia & 6 mt internal clear depth including the

cost of excavation, foundation, honeycombed masonary, full brick masonary in CM (1:6), RCC M25 grade

64 for top slab, RCC top MH Cover 650 X 550 mm filling with dry brick bats up to 1 mt depth, curing, 1.00 Nos 99580.00

reinforcement, and 75mm dia cowl vent etc. complete as per detailed drawing and directed by EIC.

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials &

disposing of the excavated stuff upto 50M. Lead. - Dense OR hard soil

Providing & laying Cement concrete 1:4:8 ( 1 cement :4Coarse sand : 8 machine crush metal black trap

66 aggregate 40mm.nominal size ) and curing complete excluding cost of form work in (A) Foundation & 55.00 CMT 2876.94

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./ sq.cm.

67 in foundation & plinth in cement mortar 1:6 ( 1 cement :+6 Fine sand ) (B) Conventional 3.00 CMT 4172.60

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./ sq.cm.

68 in super structure above plinth level (upto floor two level) in cement mortar 1:6 ( 1 cement : 6 Fine sand 30.00 CMT 4451.47

) (B) Conventional

Filling available excavated earth ( excluding Rock ) in trenches, plinth, sides of foundations etc. in layers

69 not exceeding 20 cm. in depth consolidating each deposited layer by ramming & watering. 14.00 CMT 135.56

Filling in foundation & plinth with murrum or selected soil in layers of 20cm. Thickness including

watering, ramming and consolidating etc. complete.

20mm. Thick sand faced cement plaster (Tipani with Gutka) on ceiling, walls up to full height of structure

above ground level consisting of 12mm.tThick backing coat of C.M. 1:3 ( 1 cement : 3 sand ) and 8 mm.

thick finishing coat of C.M. 1:1 ( ! Cement :1 sand) etc.. Complete.(for all floors)

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :- (A) In beams and joints channels angles, tees, flats with

72 5.00 Quintal 9018.30

connecting plates or angles cleats as in main and cross beams, hip and jack rafters, purlins connected to

common rafters and the like.

Providing & Laying C.C. (1:2:4) / M-15 or for plain or R.C.C. work for Road pavement, using 12mm. To

20mm. Size black trap machine crushed metal including necessary centering for all sides as required

mixing the concrete in mixer machine, ramming with Vibrator, including keeping the joints between

73 road panels & finishing the Honeycombed surface if any, immediate finishing of Top layer of road with 35.00 CMT 4476.39

Trowel & spunch to create anti skid hard surface with curing etc.. complete as per drawing &

specification, & as directed by E.I.C. with supply of cement by the contractor. ( REINFORCEMENT IF ANY

WILL BE PAID SEPERATELY.)

Carring out cement concrete work for road pavement by trimix ( vacume dewatering service ) process by

using vacume dewatering equipment / pump & floater disc surface vibrator etc incl. proper vibration /

compaction & anti skid surface finish of concrete pavement incl. Making groove in it incl. all

tools,tackels,materials, labour etc. complete as directed.

Providing TMT bar FE 500/500D reinforcement for RCC work including bedding binding and placing in

position complete upto floor two level.

Providing & Fixing China Mosaic Tiles flooring as water proofing treatment including (a) Applying

Cement slurry of cement mixed with water proofing compound after cleaning the surfaces properly.(b)

Cracks in slab shall be open in "V" groove & all materials shall be removed & approved type of expanding

crack fillet material. (c) Depression in slabif any be filled up with C.C. (1:2:4) I.P.S. Flooring.(d) P/L 20mm

thick plaster layer in C.M (1:4) with cement admixed with water proofing compound including rounding

76 of junction of walls and slabby making cement vatta. (e) Finishing the surface with china mosaic tiles 160.00 SMT. 771.98

(pieces) flooring incl. fixing the samein cement mortar (1:2) setting with ready made tile adhesive as

recommended by manufacturer's including filling of joints mixed with pigment white slurry of

matching.(f) after finishing the whole terrace shall be flooded with water to check the performance of

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies, ramp etc.

inHorizontal 2"(50mm) dia S.S. pipe & three horizontal 1"( 25 mm) S.S. pipesize S.S.Resting by square

bars 1.5"x1.5" of clear height 90cms placed at 3feet c/c including making necessary hold fast fixture

Ramp concrete for resting the S.S Pipe . vertical square bars with holding etc. as per approved design

and as required for the work including bending hand rail pipe to proper shape in curves with specials

etc. complete . Railing height is 1 M.

Providing & Fixing 450X300 mm. size Black granite year plate with black border all-round & letters

including fixing the same in cement mortar etc., complete as directed by E.I.C.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm

and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised

79 steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including 60.00 RMT 388.05

fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

Providing & Fixing hinged type 40mm. square. M.S. Pipe gate as per drawing & design incl.erection of

gate with necessary hinges supported to vertical girders, locking arrangement by providing & fixing

80 aldrop on both sides, with 3 coats of oil painting of approved shade & make with one coat of red 11.00 SMT. 2394.00

oxide primer etc., complete as directed by E.I.C. (COST DOES NOT INCLUDE THE COST OF COLUMNS,

STEEL/JOISTS, CONCRETE, MASONRY ETC.)

Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone

81 aggregate 20 mm. Nominal size) laid in one layer finished with a floating coat of neat cement.( 40 mm 90.00 SMT. 296.98

thick IPS flooring )

Laying out Lawn:After excavating soil upto30 cm depth,preparing soil for plating by supplying and mixing

farm yard manure at the rate of 5 cu.m. per 100 sq.mt. area ,providing and planting suckers of pure

dharo(doob) grass roughly at 10cm X 10cm. distance and maintaining till well established etc. complete

(about 45 days).

Providing, planting & Development of SELECTED best quality of green / red mehndi, golden Durant

hedge on both side of road including digging for excavation spreading.

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Providing plantation & development of plants, small trees of plants of selected & approval name quality,

size and growth in good condition. The work including cost of plants, materials, digging pit in the soil of

size 0.60 x 0.60 x 0.60 mtr. Soil for planting trees, mixing of manure & refilling the pit with good earth,

watering as and when required. Providing pesticides / fertilizer with twelve months of maintenance,

84 replacement & replacing of dead plants during maintenance cleaning, removing, labours, tools & tackles 20.00 Nos 940.00

transportation, loading, unloading etc., complete ad directed by the E.I.C., but for following plants.

Spethodia, Bottle Palm, Sampion Palm, Terminalia Etc Bag Size Of (21 x 21) & maintaining till well

established OR as approved by EIC.

Providing & Laying cement concrete M-200 and finishing smooth with curing etc. complete including the

cost of form work but excluding the cost of reinforcement for R.C.C. work in (iii) slab having more than

10cm & up to 13cm. thickness. Note: Cement consumption rate diff. added Rs.341.20 for ordinary

concrete to M-200.

Providing 20mm. Thick double coat mala cement plaster on interior brick / concrate work for plastering

comprising of base coat of 12mm thick cement plaster in (i) Cement mortar 1:4 ( 1 cement :4 coarse

86 sand)in rough finishing and 8mm thick top coat of cement mortar 1:2 (1 cement :2 coarse sand) finished 100.00 SMT. 281.51

with trovel incl. scafolding, curing etc complete. (up to floor two level)

Providing & Laying ordinary cement concrete M-200 for R.C.C. lintel including finishing smooth with

curing etc. complete including the cost of form work but excluding the cost of reinforcement. (up to floor

two level) Note: material rate diff. added Rs. 341.20 for ordinary concrete M-150 to M-200.

P/F corrugated colour coated GI sheet roofing of Jindal or Equivalent make having width of 1050mm (

effective 1000mm) and fixed with colour coated galvenized iron 'J' or 'L' hooks, bolts & nuts 8mm

diameter , with bitumen and G. I. Limpet washers filled with white lead complete excluding the cost of

Purlins , Rafters and trusses .(0.60 mm. Thick Sheet.)

Supplying & erecting approved make low noise decorative exhaust fan having size 250mm with

RPM with square frame ABS body with inbuilt lowers & square frame.Cat-II

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics

with company mark/name 120 to 300 V, Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)(D) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20(iii) 12-15 watts, 6" x 6", Surge-2 KV ii) Cat-III

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades

with , canopy & down rod (as per requirement) erected with 24/ 0.2, 3 core flexible wire with

earthing.(Make shall be approved by Engineer in charge))

92 Providing & fixing one door bell as per instruction of E.I.C. 4.00 NOS 160.17

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories

93 and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame 30.00 NOS 377.12

covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC

pipe and accessoriesCat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in

/ flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step

type electronic fan regulator with separately mounted and accessories with earth continuity of following

type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box,

95 single mounting base frame covered with textured / metallic front plate modules erected on / in wall / 19.00 NOS 216.10

ceiling with following type accessoriesCat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

96 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with 10.00 NOS 596.61

following type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

db board.,a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Providing & fixing concealed wiring for WAN line (internal) with 6 CAT ISI Computer cable with separate

1.5 mm thick 1/2" dia. PVC pipe including relevent materials as per drawing & specification & direction

with I/O Socket with box RJ-45 & labour,wire & Pipe ( Aprox length up to 10mtr) as per instruction of

Providing & fixing concealed wiring for WAN line (internal) with 6 CAT ISI Computer cable with separate

1.5 mm thick 1/2" dia. PVC pipe including relevent materials as per drawing & specification & direction

with I/O Socket with box RJ-45 & labour,wire & Pipe ( Aprox length up to 10mtr to 20mtr) as per

instruction of E.I.C etc.

Name of work: Renovation Work of Sathamba sub division office Building at 66KV S/S campus Sathamba.

I.No Description Qty. Unit Rate Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

99 mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following 100.00 RMT 69.49

size (a) with medium class Rigid PVC pipe and accessories b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size(a) with

medium class Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics

with company mark/name 120 to 300 V, Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K,

101 Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver efficiency > 85 % 10.00 NOS 636.44

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)(A) Tube Light with integral/ non-integral driver (d) 22-24

Watts, Surge - 2KV,IP-20, 4 feet, Cat-III

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm

102 length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected 6.00 NOS 36.44

concealed in Ceiling with necessary finishing.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of applications.(a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

P/F A.C wiring with 4 sqmm wire with 2.5mm sq earth wire and electronic starter with O/L tripping

facility Length of wire up to 10mtr

P/F A.C wiring with 4 sqmm wire with 2.5mm sq earth wire and electronic starter with O/L tripping

facility Length of wire above 10mtr

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or

embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM

106 / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required 6.00 NOS 4193.22

LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

protection. (d) above 36 to 48 watts, CAT-III

107 Providing & Erecting 3mm thick acrylic Sheet with grooving as directed 150 sq.inch 2.54

Supply, installation, Testing and Commissioning of approved make Decorative Bracket Light fixture with

108 lamp complete with all accessories as per drawing, as per approval of Consultant / Client and as per 2.00 Ea. 1355.93

direction of engineer incharge.

Supply, Installation, Testing and Commissioing of Bollard Light For Garden Purpose. Inventaa or

equivalent Brand. (ELENA 4" SQ BK BOLLARD 2 FEET)

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

110 materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 70.00 SMT. 48.69

111 Providing smartcare asian apex damp proof. 330.00 Liter 392.00

112 Labour charges - Painter 10.00 Nos 704.00

Total Estimated cost = Rs.

Add 1% welfare cess = Rs.

Total with 1% Welfare Cess

Total Estimated cost with welfare cess 1% and gst 18% = Rs.

Signature of the Contractor Superintending Engineer

(with rubber stamp & date) Circle Office, Himatnagar