Installation Testing and Commissioning multi stage Horizontal pump motor set of specification 5000 GPH x 280MH along with allied electro- mechanical works at pumping station Badakana

Amount

Cost on account of carriage of Horizontal pump set 5000GPH x 280MH along with Induction motor & base frame from Divisional store to Pumping Station Badakana by mechanical transport by way of loading the same into the vehicle by using crane / chain block and manual labour & then unloading near the approachable road side and stacking at safe place. Shifting it to Pumping Station by Manual/Head load from stacking place by making arrangements of tools and tackles and using of manila roap, wooden logs etc.

Cost for laying of RCC foundation block for HCP set of size 2.0m×0.90m×0.90m in 1:2:4 mix sufficiently elevated with respect to floor level, fabrication & fitting of foundation/Anchor bolts of required size, quantity and fixing of base frames on the foundation blocks with the help of foundation / anchor bolts tightening of foundation bolt and its proper leveling by using leveling tool. Placing/fitting of HCP & motor on base frame, fitting of coupling pulley set, its tightening with nuts bolts & washers etc after its proper leveling with steel shims etc. Complete job includes cost of material, carriage and labour charges.

Laying/fitting of Suction and delivery pipe line of size 80 mm dia. and 65mm dia. respectively of GI pipe (Medium). Fitting of suction line from outlet of sump tank to suction flange / head of HC pump set by way of P/ Fitting of Sluice valve 80 mm (01 No) or foot valve of required size at the appropriate place in the Suction line with the help of P/F of 2Nos. M.S. flanges each & fitment in pipe. Making of 5/8” dia. holes in each to match Sluice valve. Welding of flanges with pipe & tightening of sluice valve with 5/8” dia. nuts, bolts with rubber/leather insertion sheet. P/ Fitting of Sluice valve 65mm dia 1No and reflex valve(H/Duty) 65mm dia (01 No) at the appropriate place in the delivery line with the help of P/F of 4Nos. M.S. flanges each & fitment in pipe. Making of 5/8” dia. holes in each to match reflux valves. Fabrication/fitting of M.S. machine flanges of required size as per the suction & delivery flanges/heads. P/fitting of G.I. Heavy duty Bends, Elbow, Socket, Nipples of size 80mm dia. & 65mm dia. in suction and delivery pipe line at appropriate place as per site requirement. The job includes cost of material, fabrication, welding, fitment charges, skilled/unskilled labour, Painting charges, carriage charges of material to site of work.

Electrical installation by way of fabrication and fitting of 01 No. angle Iron frame of size 3’ x 6’ and drilling of holes for fitting of kit ply board 19 mm thick (water proof) of same size 3’ x 6’. Painting of angle iron with one shade of primer & two shades of high quality black paint. P/F of mica as per size of board. Providing and fitting of 200 Amp. 451 volt , 3 phase good quality main switch of HRC type of I.S.I make on existing switch board by way of drilling holes providing of nuts , bolts washers etc. Providing/fitting of Voltmeter 0-500V, Ampere meter 0-200A, Angle holders-3Nos, Bulbs 3No. for phase Indicator, copper wire 25mm² (approx 25mtr length as per site requirement ). On-Off switch-3No, gang box, insulation tapes, screws, nuts, bolts, washers, baton etc on Switch board. P/F of aluminum cable 300 mm² Single core (H/D), unarmoured to be layed for making connections from L.T pole to main switch to Voltage stabilizer for all the three phases in four leads with neutral ( Approx. 35mtr. length as per site requirement ) with proper thimbling duly crimpled by using crimpling tool & proper insulation.

P/F of 60HP Oil immersed Star Delta Starter of I.S.I make on switch board board by way of drilling holes providing of nuts , bolts washers etc. . P/F of 19/16 PVC Copper cable for all the three phases from output of Bus Bar Box/ voltage stabilizer in three leads to Star Delta Starter and six leads from starter to up to motor (Approx. 60 mtr length as per site requirement) with proper thimbling using copper thimbles duly crimpled by using crimpling tool & proper insulation. . Conduiting of whole electric circuit with the help of Conduit pipes, batons, PVC flexible pipes, bends etc. Complete job includes cost of material and labour charges.

Testing and commissioning of HCP and other allied electromechanical equipments set after checking of alignment of pump & motor, checking all the electrical connections with magger, tightening of loose connections if any, plugging of leakage of joints by welding & tightening of nuts & bolts etc. job includes cost of material & labour charges for loading unloading carriage fitting & testing charges. ( one complete job )

Testing and commissioning of submersible pump motor set all other allied electro mechanical works. Checking of all electrical connections, tapping and tightening all other connections. Plugging of leaking joints if any by way of welding, replacement of gaskets and tightening of nuts and bolts. Checking the alignment of pump and motor sets and testing the machinery on full load. Complete job.

Horizontal Squirel Cage Motors High Speed

40 HP Type I

40 HP Type II

50 HP Type I

50 HP Type II

60 HP Type I

60 HP Type II

75 HP Type I

75 HP Type II

Horizontal Squirel Cage Motors Slow Speed

Open well Mono sub motors

TRIKUTA ELECTRICAL AND MECHANICAL WORKS

BEE AAR ENTERPRISES