Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹84,000
Closing Date
12 Nov 2026, 4:30 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Karnataka Power Corporation Limited
JAGADEESHA EP
Replacement of LT lines / poles / Service Mains by laying U.G. Cable inside the colony for TC Type- 4 to7 area
KPCL/2026-27/EL/WORK_INDENT4973
KPCL/2026-27/EL/WORK_INDENT4973
Open
Electrical
Two Tender Document System(Two Cover)
KPCL Executive Engineer CPS Office RTPS Raichur
3 documents required · 0 mandatory · 3 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
The bidder shall have carried out similar work or supply/erection of UG LT cable/ LT panel and as proof of the above, a copy of work order cum Work done certificate worth of Rs 20.91 lakhs executed in single work order in any one of the preceding Five years. (2021-22, 2022-23, 2023-24 and 2024-25 and 2025-26). As a proof of this the bidder shall upload work order and relevant work done certificate issued by an officer of the rank of Chief Engineer / Competent authority. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited).
The bidder shall be a Class-II or above electrical contractor. As a proof of this, valid Electrical license issued by Govt. of Karnataka shall be furnished As a proof, the bidder shall furnish the copy of same.
The bidder shall have minimum average annual turnover of Rs 49.34 Lakhs in any two of preceding five years. (2021-22, 2022-23, 2023-24 and 2024-25 and 2025-26)As a proof of this, the bidder shall upload copies of turnover certificate or profit & losses statement duly certified by chartered accountant.( Financial turnover for previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited)
₹1,050
₹84,000
28 Oct 2026
28 Oct 2026
13 Nov 2026
5 Nov 2026
Replacement of LT lines / poles / Service Mains by laying U.G. Cable inside the colony for TC Type 4 to7 area
Supplying of 1.1kv LT UG cable XLPE or Heat resistant PVC insulated,PVC extruded inner sheathed Armoured UG LT cable as per IS 1554 [part-1] or IS: 7098 part-1 Armouring strip thicknes in average +5% ...
2 Core 16 sqmm size multi-strand aluminium [ Service mains]
3 1/2 Core 70 sqmm size multi-strand aluminium
Labourcharges for laying of 1.1kv class UGcable in existing trench/ GI Pipe/ stone ware pipe/ on wall/on pole as required-2.5 to 25 Sqmm
120 to 240 Sqmm
Supplying GI pipe ISI make only
GI Pipe -25 mm Dia
GI Pipe - 50 mm Dia
Supplying & Fixing moulded case circuit breaker over existing wood /panel board using neccessory screws, bolts,nuts neccessory phase separators handle and wiring complete. Protection of overload and s...
3 phase 4 pole 200 amps
Supplying & Fixing regular MCCB distribution penal confirm to IS 8828, on wall / wood board / flush mounting using required clamps, bolt & nut etc., with provision for fixing of suitable type capacity...
Excavation of cable trench 50 cm wide and 60 cm deep trench for laying UG cable including back filling the trench with excavated material in layers and compacting after laying cables etc., complete. -...
Supplying & Fixing angle iron frame work fabricated out of MS angle iron & MS flat bolts, washers etc., & painted with 2 coats of red oxide and 2 coats of approved paint. -50 X 50 X 6 mm MS angle
Fabricating, supplying & erecting swaged tubular pole of height 9 mtrs having three sections and providing 2 coats of red oxide paint and finished with 2 coats of enamelled paint approved quality and ...
Supplying & Fixing of Hot dip galvanized MS Bracket suitable for out door luminaries & mounted on Octogonal pole using necessary bolts ,nuts etc, complete. Single Arm bracket with 2000mm Standard 40/5...
Wiring for lighting /power circuit using one of FRLS PVC insulated 1100 V grade,multistrand Copper wire with low conductor resistance single core in open or concealed system of wiring as per IS-694 & ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fixing & wiring earth electrods for grounding conduits,IC,cutouts and other equuipments using 2.5 mtr long 40mm dia, 2.9mm thick GI pipe provided with 12mm dia, stagered through holes, burr...
Supply & Fixing LT Distribution Box -250KVA LT Distribution box suitable -for 250 KVA Transformer with 1no 400Amps 25kA 4 Pole MCCB, suitable capacity Aluminum bus bar mounted in 16SWG Powder coated M...
Supplying & Fixing of heavy duty cable glands Suitable for UG cable of 1.1 kv class [metal only]- Brass Cable Gland 25mm dia
Supplying & Fixing of heavy duty cable glands 45mm dia
Burnt bricks [Class 35 Modular, 10 briks per mtr.]
Providing M-Sand : Supplying and filling in plinth,foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, lab...
Rcc hume pipe,2000mm long 200mm dia pipe
Route & joint indicating slab with MS anchor rods,for every 15mtrs intervals.
Fixing of route and joint indicating slab
Covering of Cables by Tiles/bricks
Dismantling of PCC / RCC poles,
Dismantling of ACSR Rabbit/ Weasel / Squirrel conductor.
Laying of RCC pipe
Releasing of 4pin X arm
Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm
Universal Hook and Bolt & Nut
Dead End Clamp/Anchor Clamp Assembly 70 to 210 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)
Piercing Connector /PG clamp Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Three Phase Distribution Box for 6 Connection
labour charge Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size 3x95 + 1x70 + 1x35 Sqmm Street light (Insulated Messenger cum Neutral)
Erection of Suspension Clamp - 25 to 95 Sqmm bare/Insulated messenger
Fixing of Universal Hook
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender TC_4_18UG.pdf
Tender Document • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .