Electric works in Directorate of Tourism Kashmir at TRC Srinagar Balance work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit/ duct( Anchor/ Polycab /Ravindra/equivalent make as directed by engineer incharge.), with modular switch ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge )single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge )single core cable in surface/recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit ( Anchor/ Polycab /Ravindra/equivalent make as directed by engineer incharge.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Modular Switch & Socket:- ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.)

Wiring for 6- 10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge ) single core cable in surface/recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit ( Anchor/ Polycab /Ravindra/equivalent make as directed by engineer incharge.) alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.)

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. For AC's

Supplying and fixing following modular switch/ socket ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.) with modular plate and cover including switch box and connections etc. as required.

5/10 amps switch

15/16 amp switch

3 pin 5/10 amp socket outlet

6 pin 15/20 amp socket outlet

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge ), single core cable in surface/ recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit as required.

(d)2 X 6 sq. mm + 1 X 6 sq. mm earth wire

( b )2 X 10 sq. mm + 1 X 6 sq. mm earth wire

(f) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, complete

Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends.

Supplying, installation, testing and commissioning of Profile Lighting system , designed for precision illumination of artifacts, displays, and architectural elements in museum or gallery spaces.The system shall comprise high-efficiency LED profile luminaires mounted on aluminium track rails (surface / recessed / suspended type as required), complete with connectors, end caps, suspension kits, and all necessary accessories for proper installation and operation.Type: LED Profile Light (Track-mounted / Linear) Power Rating: 20W to 45W per fitting (as per design) Input Voltage: 220–240V AC, 50 Hz Colour Temperature (CCT): 3000K / 4000K Colour Rendering Index (CRI): ≥90 (museum-grade colour accuracy) Beam Angle: Adjustable / fixed (as required, typically 24°–60°) Body Material: Extruded aluminium with powder-coated finish (Black / White) Track Type: 1-circuit or 3-circuit compatible Control: Dimmable (DALI / 0–10V / phase cut as required) Accessories: Track rail, connectors, power feed unit, end caps, suspension brackets, junction box and wiring connections complete in all respects. Ingress Protection: IP20 or higher Make: Philips / Wipro / Havells / equivalent approved make.

Supply installation testing and commissioning of 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium body, Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux /Wipro make / sample to be approved before installation..

Supply installation testing and commissioning of 36 W + ( 2x2) LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium/ CRCA body, Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/Helonix /Wipro make / sample to be approved before installation..

Supply installation testing and comm. Of 250mm sweep exhaust fan Shutter type/ steel body of havell /USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections.

Supply, Installation, Testing and Commissioning of decorative 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . Havells Leganza/Crompton aura /equivalent make as directed by engineer incharge.( Sample to be approved before installation)

Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /SSK NV/schneider Zencelo /Havell Coral make.

SITC of wall fan 400 mm sweep as approved by EIC ,240v,50 Hz complete , etc. as required. Make(Usha /Orient/Crompton/ Havells

Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block.

S/F testing and comm. Of 36 W + 4 ft. wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with minimum system lumen efficacy of 100 lm/W with THD<10%.( commercial series) CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix /Wipro make / sample to be approved before installation..

Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,( legrand/ Scheinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

4 way, Double door ( 12+4)

8 way, Double door ( 24+4)

Supplying and fixing of following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. legrand / Schinider/ L&T ./equivalent make as directed by engineer incharge.

a) 6-32 Amp SP MCB

b) 40-63amp DP MCB

c) 40-63amp TPN MCB

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

a)250 Amp TPN MCCB 25 K including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens make.

a)630 Amp TPN MCCB 25 K including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens make.

Carrying out comprehensive wet servicing of A.C's ( 1 Ton/1.5 ton/2 Ton) including dismantling of indoor unit covers, through cleaning of air filters, blower assembly, cooling coil, drain tray and drain pipe with water jet/ chemical solution, cleaning of outdoor unit condenser coil with water jet, checking of electrical connections,thermostate operation and overall system performance, including minor repairs, complete as required.

Supply ,installation of PC Card of 2 Ton AC of LG/IFB/Panasonic/Diakin make for replacement of damaged PC Card

Supply, Installation, Testing & Commissioning of 10 KVA 3-Phase IN single-Phase out ON Line UPS System with provision for connecting in 3 phase input and 3 phase output configuration, unity pf, LCD display with gravity sensor, built in OVCD, to provide backup time of 60 minutes at full load (minimum VAH 24000), With In-Built Isolation Transformer of reputed make dully ISI Marked (APC Schineider/ETON/VERTIV/ equivalent standard make ) (Compitable to Genrator Supply having varing frequency) With on line double conversion topology, high frequency techonology, with front LCD,automatic bypass for fault tolerance & complete with required Number, 12 Volts 65 AH SMF VRLA Batteries ( Exide/ Amaron/Quanta make) with connecting links with angle iron battery stand complete job, complete with battery rack with two year warranty against any manufacturing defect. The job further includes AMC for UPS and batteries for a period of three years with replacement warrenty reckoned from date of sucessfull commissioning.

Providing of Chemical earthing as per IS standards by way of digging 2 mt. deep pit then embedding 2 meter copper bound G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire . Full thread brass nut and bolt and washers. Refilling of pit with chemical compound.

Engaging of highly skilled labour / Electrician/ IT Related personal for carrying out I.T repairs at site, Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets, servicing of panels and allied works, complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out repairing works etc.

Design, Fabrication of panels of different sizes, Supplying, Installation, Testing and Commissioning of panels, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement)

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

a)200 Amp TPN MCCB 25 K including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens make.

b) 400 amp 4 strip bus 1 No.

OUTGOING:

63amp TPN MCB 10 KA

space for 12 way MCB's