CERTAIN REPAIR TO BR ITEMS INCLUDING FITTINGS FIXTURES CERTAIN REPAIR TO ELECTRIC WIRING IN OTM AND MD ACCN INCLUDING MAINT OF HEATING AND COOLING APPLIANCES AT HALDWANI KAMOLA AND RANIBAGH UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

All as per item no. 1 here in before but of any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in slab, floors, roof, landing, balconies supported on walls, beams and columns, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landings, balconies and finished rough surfaces of concrete flat complete all as specified and directed.

S & F for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with (annealed) not less than 0.90 mm dia wire complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over with and including cement mortar screed bed 15mm thick in CM 1:4, complete all as specified and directed.

M&L for Marble work of any shade other than white 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl rounding off edges and bull nosing of all external edges over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over with and including cement screed bed 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing grinding and polishing complete all as specified and directed.

M&L for Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over with and including cement screed bed 10mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

All as per item ser No 17 here-in-before but in skirting/dado or verticle surfaces with and including back coat of screed bed or bedding layer of 10 mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with with and including back coat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and white or coloured cement to match in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match as in floor etc , complete all as specified and directed.

M&L for Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and white or coloured cement to match over with and including screed bed or bedding layer 10mm thick in CM 1:4 complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including connections and fittings, complete all as specified and as directed.

All as per Item No. 23 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

All as per Item No. 23 here–in–before, but for 25mm dia (Bore) complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with and including all GI fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No. 26 here–in–before, but for 20mm dia (Bore) complete all as specified and directed.

All as per Item No. 26 here–in–before, but for 25mm dia (Bore) complete all as specified and directed.

S & F in repair 15mm dia bib taps CP Brass with capstan head, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S & F in repair 15mm dia bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.

S & F in repair brass CP pillar taps fancy type for iron pipe of bore 15mm fancy type with capstan head complete all as specified and directed.

S & F in repair brass chromium plated basin Mixer valve hot and cold screwed down for iron pipe 15 mm bore complete all as specified and directed.

S & F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.

S & F in repair Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F Ball Valves Brass, 15mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S & F Ball Valves Brass, 20mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

S & F Ball Valves Brass, 25mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

Supply & Fixing 50mm dia CP waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly nuts, flange end based in red lead cement complete all as specified & directed.

Supply & fixing PVC waste pipe 32mm dia of cup with over all length of pipe 90cm complete all as specified and directed.

Supply & fixing PVC waste pipe 40/50 mm dia of cup and over all length of pipe 90cm complete all as specified and directed.

S & F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

Supply & Fixing Soap Dish CP Brass complete all as specified & directed.

S & F toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

Supply & Fixing Peg Set of 6 with base plate stainless steel complete all as specified by Engr-in-Charge

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed.

Supply & Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

Demolition of WC incl taking out lime concrete, brick bats from sunken floor (approximate area of sunken portion 1.2m x 1m) portion and applying a coat of 85/25 bitumen @ 1.25kg/sqm, plastering with 15 mm thick in CM 1:4, provn of PCC 1:2:4 type B-1 for proper slope and providing 25mm dia GI spout pipe projecting 0.25mtr beyond the external face of wall complete all as specified and directed..

Supply & Fixing in repairs vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S & F in repairs Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed.

S & F in repairs one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed.

Supply & fix Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) as approved by the GE.

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3 including taking down unserviceable flushing cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S & F in repairs wash hand basin of vitreous china counter sunk size 560mm x 410mm x 180mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

Supply and Fixing in repairs sinks with out drainage board made of stainless steel 0.75mm thick kitchen or laboratory, overall size 430mm x 510mm bowl size 430mm x 380mm x 203mm complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S & F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms).

S & F in repairs stainless steel grating 100mm dia complete all as specified and directed.

S & F in repair Stainless Steel grating 125mm dia complete all as specified and directed.

S & F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S & F in repairs PVC Connections 15 mm dia with PTMT nuts of length 600mm long complete all as specified.

Dismantling of CI/PVC pipe 100mm/110mm dia jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

Dismantling of CI/PVC pipe 75mm dia jointed in cement mortar and taking out of trench if required complete all as specified and as directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc complete all as specified and as directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc complete all as specified and as directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

S & F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and directed.

S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

S & F CI spun pipe branch piece 75mm bore, single(eaqual or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed.

Extra over CI spun pipe fittings if fitted with oval access door 100mm complete all as specified and as directed.

Extra over CI spun pipe fittings if fitted with oval access door 75mm complete all as specified and as directed.

S & F CI floor tarps of size 75mm with grating including jointing to CI pipe with lead joint complete fixed in repair incl making joint water tight complete all as specified and as directed.

Supply & fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed to walls with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed.

All as per item ser no 77 here-in-before but laid in trenches or in floors complete all as specified.

Supply & fixing in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed to walls with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including finishing to match with existing surface complete all as specified and directed.

All as per item ser no 79 here-in-before but laid in trenches or in floors complete all as specified and as directed.

S & F Cabinet Mirror 400 x 500 mm, complete all as specified and as directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS square tube complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8 B.2.1 of SSR Part-II 2020 all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified. (Note:- Glass pane and mesh will be measured and paid separately )

Supply and fixing powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed.

S & F sheet glass 4.8mm thick tinted glass and glazing in squares fixed to aluminium door/windows/vents complete all as specified and as directed.

Supply & fixing aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl making hole and fixing with cement complete all as specified and as directed.

S & F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

Supply & fixing Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No.96 herein before but without glazing bars complete all as specified and as directed.

Supply & fixing steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/spring clip and providing and fixing new ones complete all as specified and as directed..

S & F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete.

S & F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and as directed.

S & F as in repair mild steel wire cloth, .45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed

S & F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed.

S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast including necessary form work complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 35mm thick plain, framed 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S & F 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) 2nd class hard wood shutter complete all as specified and as directed.

Supply and fixing in repair 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved complete complete all as specified and directed.

S & F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles not exc 200 cu cm each complete all as specified and as directed.

S & F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified .

Supply & fixing Contnuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps ( when open) 30mm complete all as specified and directed.

Material and Labour for welding of steel member of steel indow/ventilator,door hinges and other sections as per requirment length of each welding upto 5 cm, making the window and ventilator operational incl provn of all necessary members viz hinges, handle, locking slot etc complete all as specified and directed.

S & F in repair Stainless Steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail as approved by GE) complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and as directed.

S & F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F aluminium handle, cast type anodized 100mm size complete all as specified and as directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and as directed.

S & F as in repair hasp and staple 150mm size of aluminium anodised complete all as specified and as directed.

S & F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S & F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

Supply & fixing Stainless Steel butt hinges medium weight of 100mm long complete all as specified and directed.

Supply & fixing butt hinges medium weight cold rolled mild steel of 50mm long complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed. Note : Rate quoted by the contractor shall be deemed to be included the above.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. NOTE -WPC shall be measured and paid separetely.

M & L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair complete all as specified and as directed.

M & L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair complete all as specified and as directed.

Supply only WPC complete all as specified and directed.

Demolition of cement concrete (reinforced), cutting scraping and cleaning reinforcement including M&L for providing RCC 1:2:4 type B1 including form work and scaffolding upto 6.00 m height in chajjas, parapets, roof projections and similar RCC works complete including rendering 10 mm thick in CM 1:3 finished even and smooth without using extra cement on RCC surfaces. (New reinforcement to be provided shall be measured and paid for separately) complete all as specified and as directed.

M & L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm in width or girth including preparation of surfaces complete all as specified and as directed.

M & L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel surfaces over 10cm in width or girth including preparation of surface complete all as specified and as directed.

M & L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion paint complete all as specified and directed.

M & L preparing new plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and directed

M & L for applying one coat of oil bound distemper to old decorated surface of wall to match the existing surface including preparation of surfaces complete all as specified and directed,

M & L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed

M & L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down stell wire brushing, scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of cement base paint on wall complete all as specified and as directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

M & L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specified and as directed.

Material & Labour for 50mm thick (laid in two equal layer of 25 mm thick) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and prepare surface to receive treatment complete all as specified and directed.

S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all specified.

Material & Labour for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and pointed flush in CM 1:3 mixed with STP No-1 liguid @ 200ml of per 50 kg of cement complete all as specified.

All as per item no 145 but except brick tiles complete all as specified and as directed.

M & L for Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n.exc 1000 ltrs complete all as specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 as in sub base finished even and rough 75mm thick complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete inter locking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for 75mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floors laid in bays including necessary form work complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling framed timber scantlings under 40 sq. cm in section in fillets, rails, posts, rafters, purlins, etc complete all as specified and as directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters, purlins, post conforming to Fe 290 (Grade E-165) where connected to common rafters and running rails and embbeded in concrete complete all as specified and as directed. .

S & F MS ornamental gates, including pintle hinges, stops, hand made sliding bolts etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and as directed..

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S & F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc. with grade of zinc coating 120 gram per sqm both sides inclusive complete all as specified and as directed.

S & F 0.63 mm thick plain galvanized mild steel sheeting as in ridges, valley gutters etc with grade of zinc coating 120 gram per sqm both sides inclusive complete all as specified and as directed.

Fixing only galvanised plain/corrugated steel sheeting in any thickness with two corrugations side lap, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc but except sheets complete all as specified and directed. Note:- Old serviceable sheets obtained from Srl item No 162 above shall be reused.

S & F prepainted aluminium zinc corrugated steel sheet (galvalume base) of thickness 0.50mm having tensile strength of 550 Mpa , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed.

S & F prepainted aluminium zinc plain steel sheet (galvalume base) of thickness 0.50mm having tensile strength of 550 Mpa , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and as directed.

Dismantling wall and ceiling boards, any thickness incl cover fillets complete complete all as specified and as directed..

Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board classic cement building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

M & L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection incl all necessary form work & finishing surface even & smooth using extra cement complete all as specified and directed.

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights, bells etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and as directed..

Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including PVC casing/capping and accessories including sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor (FRLS) cable earth wire and connected to earth, etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge)

All as per item No.174 here-in-before but one bell point controlled by one switch

All as per item No.174 here-in-before but one light point controlled by one two way switch

All as per item No.174 herein before but one socket outlet 5 Amps on the same board.

All as per item No.174 here-in-before but one socket outlet 5 Amps on independent board

All as per item No 174 here-in-before but wiring with 2.5sqmm copper wire (FRLS) PVC and 2.5 sqmm earth (FRLS) wire for socket outlet 5 pin 15 amps on independent board.

All as per item No 174 here-in-before but wiring with 4.0sqmm copper wire (FRLS) PVC and 4.0 sqmm earth wire (FRLS) for socket outlet 5 pin 15 amps on independent board.

Supply & Fixing point wiring for one light point/ fan point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable (FRLS) earth wire and connected to earth etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge.)

All as per item No.181 herein before but one bell point controlled by one switch.

All as per item No.181 here-in-before but one light point controlled by one two way switch.

All as per item No.181 here-in-before but one socket outlet 5 Amps on the same board.

All as per item No.181 here-in-before but one socket outlet 5 Amps on independent board

All as per item No 181 here-in-before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire (FRLS) cable for socket outlet 5 pin 15 amps on independent board.

All as per item No 181 here-in-before but wiring with 4.0 sqmm copper wire (FRLS) PVC and 4.0 sqmm earth wire (FRLS) cable for socket outlet 5 pin 15 amps on independent board.

Supply & Fixing lamp holder (dome type) PVC insulated body with cord grip cap for angle/battern fitting complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed.

Supply & Fixing Bell push, flush type, 6 Amp complete all as specified and directed.

Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply & fixing Bell AC 230 volts, 50 Hz single pole complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply and fixing of 6 Amp one way switch, 1 module, modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz. electrical supply complete all as specified and directed.

All as per item No.198 here-in-before but 6 Amp two way switch, 1 module

All as per item No.198 here-in-before but 6 Amp 2/3 Pin combined socket shuttered, 2 module

All as per item No.198 here-in-before but Modular Switch 1 way 16 Amp, 1 Module

All as per item No.198 here-in-before but Modular socket 6A/16Amp, 2/3 pin combined, 2 Module

All as per item No.198 here-in-before but 6 Amp bell push switch modular type

All as per item No.198 here-in-before but Steped type electronic fan regulator modular, 120W-2 module

Supply and fixing of modular front plates, 2 Module white with frame on existing boxes complete as required complete all as specified and directed.

All as per item No.205 here-in-before but 3 Module

All as per item No.205 here-in-before but 4 Module

All as per item No.205 here-in-before but 6 Module

All as per item No.205 here-in-before but 8 Module

Supply and fixing anodised rust proof 18 SWG MS box, flush type of size 75mm x 105mm x 50mm deep (1-2 Module) (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required complete all as specified and directed.

All as per item No.210 here-in-before but 75mm x 105mm x 50mm deep (3 Module)

All as per item No.210 here-in-before but 75mm x 105mm x 50mm deep (4 Module)

All as per item No.210 here-in-before but) 75mm x 210mm x 50mm deep (6-8 Module)

Supply & Fixing sheet metal enclosure with socket plug top and MCBs Single pole and neutral enclosure 240 Volt with a two pin and earth plug and socket complete with on single pole MCB 20 Amp complete including taking down unserviceable sheet metal enclosure of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No.215 here-in-before but 8 way

All as per item No.215 here-in-before but 12 way

Supply & Fixing sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed and concealed in wall including taking down unserviceable main switches MCB DB’s of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No.218 here-in-before but 8 way

All as per item No.218 here-in-before but 12 way

M&L for PVC/Polycarbonate rectangular block for mounting, switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep incl fixed with screws and cup washers and taking down unserviceable switch board of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and directed.

All as per item No.221 here-in-before but 175 x 100 x 50 mm deep

All as per item No.221 here-in-before but 200 x 150 x 50 mm deep

All as per item No.221 here-in-before but 250 x 200 x 50 mm deep

Supplied & Fixing Rigid non matallic PVC conduits external dia 20 mm ISI marked exclusive of boxes (Junction/terminal) but inclusive of all tee, bends, elbows, reducers, bell mounth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc for exiting point/main/sub-main wiring complete all as specified and directed.

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 415V, 10KA 'B' curve miniature circuit breaker (MCB) of triple pole neutral/four pole (TPN/FP) and current carrying capacity 16 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 415V, 10KA 'B' curve miniature circuit breaker (MCB) of triple pole neutral/four pole (TPN/FP) and current carrying capacity 40 to 100 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed .

Material and labour for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including chase cutting and making good surface as original by plastering and white/ colour wash/ distempering etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 2.5/4/6/10 sqmm and one run of 1.5/4/6/10 Sqmm as applicable incl PVC conduit will be measured as one unit ie one running metre”

All as per item No.230 here-in-before but 2 X 4 Sqmm inclusive 4 Sqmm earth wire.

All as per item No.230 here-in-before but 2 X 6 Sqmm inclusive 6 Sqmm earth wire.

All as per item No.230 here-in-before but 2 X 10Sqmm inclusive 10 Sqmm earth wire.

Material and labour for Sub main wiring with 2 run of 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in and including PVC casing capping ( ISI marked) Heavy grade inclusive of junction/terminal boxes, all fittings and accessories fixed and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Three run of 1.5/4/6 sqmm and one run of 1.5/4/6 Sqmm as applicable including PVC casing capping will be measured as one unit ie one running metre”

All as per item No.234 here-in-before but 2 X 4 Sqmm inclusive 4 Sqmm earth wire.

All as per item No.234 here-in-before but 2 X 6 Sqmm inclusive 6 Sqmm earth wire.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling, life of tube light not less than 50,000 hours including connecting up with driver three core flexible copper conductor cable of suitable size complete. Make Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fixing round shape 15 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling, life of tube light not less than 50,000 hours including connecting up with driver three core flexible copper conductor cable of suitable size complete. Make : Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

S & F LED light fitting 1X10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells cat pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in Make :- Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fixing post top lantern LED type 40 Watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper cable of suitable size complete

Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 50,000 hours complete all as specified and directed.. Make Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of LED light fittings from manufracturer alongwith purchase voucher.

Supply and fixing LED lights T-8 fitting 1x 20W (warm/milky white as required on site), 220 V including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 50,000 hours complete all as specified and directed.. Make Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of LED light fittings from manufracturer alongwith purchase voucher.

Supply and fixing LED lights T-5 inverter batten fitting 20W, 220V, AC, with back up time of upto 3 hrs, auto cut off after full battery charging, regular operation lumen of 1800 Lm & back up lumen of 30 Lm, 2.5kV voltage surge protection incl driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 15,000 hours complete all as specified and directed.. Make Havells/Phillips/Bajaj/C&S Note:- Contractor shall submit 2 year warrenty of LED tube lights from manufracturer alongwith purchase voucher.

Supply and fixing LED mirror light (T-5) fitting with high out put diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver holder and LED lamp including connecting up with two core flexible opper conductor cable of suitable size complete

M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and making the fan operational with a guarantee period of one year after installing, repair of fan complete all as specified and directed.

Material & Labour for taking out burnt/damaged winding, bushes & cleaning of stator and rotor incl etc of exhaust fans any sweep and size, Rewinding with 26/27 SWG of enamelled copper winding wire replacement of shaft, bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length complete all as specified and directed.

M&L for taking out burnt/damaged fan motor of Desert cooler and supply and fixing new fan motor with 26/27 SWG of enameled copper winding wire with bearing / bushes and including provision of 23/0.0076 copper flexible core twin core not less than 3 meter in length with two pin top plug etc. and make the desert cooler in operational condition complete all as specified and directed. Comprising of the following works :- (i) Replacement of water pump including water pipe (Complete set). (ii) Replacement of Fan blade (PVC/Iron) as required on site. (iii) Replacement of desert cooler front grill (Fiber/Steel/Plastic as required) including switch, indicator and regulators. (iv) Checking & tightening the electrical connection (v) Replacement of wood wool (Grass Air cooler cooling pad) suitable of iron/Plastic body desert cooler (vi) Replacement of side grill (sets of 3) for holding wood wool/cooling pads. (vii) Replacement of fan condenser 3.15/4.0 mfd.

M&L for servicing of water heater (Geyser) upto 50 Ltr capacity of any make by cleaning sludge and slurry, calcium inside inner water storage tank and make the geyser in operational condition all as specified and directed by Engr-in-charge. Comprising of the following works :- (i) Rectifying water leakage in inner copper/iron storage tank by using welding (ii) Replacement of heating element upto 2000 Watt. (iii) Replacement of Thermostat of suitable size as required on site. (iv) Checking & tightening the electrical connection (v) Replacement of safety valve. (vi) Replacement of NRV (Non returning valve) of suitable size as required at site .

Supply and fixing solar heater tube suitable for fixing of Solar Water heater system (Executed tube collector based) on direct transferring of heat of capacity 500 LPD and make the system operational complete all as specified and directed.

M&L Servicing of indoor and outdoor unit of split type/ window AC of 1.5/2.0/3.0 ton capacity of any make by air blowing, cleaning the filter in water and drying in sun, cleaning of drain tray and rectifing water leak, checking and tightning the electrical connection incl provide insulation material on cooling coil and heating coil etc all as specified and directed by Engr-in-charge.

Supply and Refilling Gas/refrigerant (CFC free) in AC 1.5 ton / 2 Ton complete all as specified and directed by Engr-in-charge.

Supply and Refilling gas/refrigerant in Refrigerator having capacity 165 to 315 ltr complete all as specified and directed by Engr-in-charge.

Supply and Refilling Gas charging in Water cooler of capacity upto 60/120 Ltr complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning of Compressor for window, 1.5 ton capacity Air Conditioner (AC) complete all as specified and directed by Engr-in-charge. Make:LG/Hitachi/GMCC/emerson.

Supply, fixing in repairs and commissioning of Compressor for Split AC, 1.5 ton Capacity complete all as specified and directed by Engr-in-charge. Make:LG/Hitachi/GMCC/emerson.

Supply, fixing in repairs and commissioning of Compressor Split and window, 2 ton complete all as specified and directed by Engr-in-charge. Make:LG/Hitachi/GMCC/emerson

Supply, fixing in repairs and commissioning Refrigerator compressor of capacity 165 to 180 ltr complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning Refrigerator compressor of capacity 210 to 315 ltrs complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning Water cooler compressor of capacity 40/80 ltr complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning Water cooler compressor of capacity 60/120 ltr complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning of relay for split and window AC upto capacity 2 Ton complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning of relay for Refrigerator upto 315 Ltr capacity complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning of PCB for split/window AC including inverter Split AC upto 2 ton capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Electronic control PCB for refrigerator upto 315 Ltr capacity all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Thermostat of window/split AC of any capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Thermostat of Refrigerator any capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Thermostat of Water cooler of any capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs blead with motor Split/window AC of capacity 1.5 TR to 2 TR complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Fan motor Water cooler of capacity upto 60/120 Ltr complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs swing motor for split AC of any capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs cooling coil for Window/Split AC for any capcity and size complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs heating coil/condenser coil for split/window AC 1.5 TR to 2 TR complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Reverse valve of AC/Refrigerator/water cooler complete all as specified and directed by Engr-in-charge.

Supply, fixing in repairs and commissioning Condenser 50 mfd for Split/Window AC upto 2 Ton capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs timer switch for refrigerator of any capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs remote unit for split type AC of any model/size all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Water cooler PVC pipe complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Float valve 15 mm for water cooler 40 to 120 ltr capacity all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Push tap for water cooler any size/capacity all as specified and directed by Engr-in-charge.

Supply and fixing Repair of voltage stabilizer of capacity 4/2/1 KVA, single phase, 230 V, AC, 50 Hz all as specified and directed by Engr-in-charge.

rehman construction company