REPAIR OF VARIOUS TYPES WOODEN FURNITURE AND ITS POLISHING FOR SRC PRC AND VARIOUS UNITS AT GE RAMGARH CANTT

Amount

BED PLY TOP (FD-245/246) :- M & L for Removing/replacement of old unserviceable wooden leg of head side, Bed Ply top and supply and fixing new well seasoned first class teak wood of size 60x60x660 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge. .

All as per item No. 01 here-in-before but leg of foot rest.

M & L for Removing/replacement of old unserviceable plywood from foot board of BED PLY TOP and supply and fixing with new 4 mm thick plywood teak venner, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 03 here-in-before but plywood from head board.

M & L for Removing of old unserviceable beading of BED PLY TOP and supply and fixing with new 12 mm dia half round cut well seasoned first class teak wood beading on head and foot board, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L for replacement of U/s corner of Bed Ply Top (FD-245/246) with new one well seasoned 1st class teak wood of size 125x125x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing of old unserviceable long rail of BED PLY TOP and supply and fixing with new one made out from well seasoned first class teak wood of size 90x35x1980 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable short rail and fixing with new rail retrieved from long rail vide item No.07 here-in-before, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable plywood top of BED PLY TOP and supply and fixing with new 12 mm thick plywood (7 nos plies) BWR plywood (ISI marked) commercial grade, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Book case small (FD-237): M & L replacement of top of Book case small of size 1200x300 x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 10 here-in-before but bottom of Book case small of size 1200x300x18 mm

All as per item No. 10 here-in-before but side of Book case small of size 660x300x18 mm.

M & L replacement of shutter of Book case small of size 380x625x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all around edges of shutter and 75mm SS Handle D type and a magnatic catcher both best quality fixed with GI screw to shutter,shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 10 here-in-before but shelf of Book case small of size 260x760x18 mm.

M & L for replacement of old broken/damaged existing back of Book case small with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of broken/damaged bottom stage /frame including four legs of Book case small with new one, made out from well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR DINING CUSHION LONG BACK (FD-357) M & L for replacement of front leg of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 17 here-in-before but rear leg of Chair dining cushion long back

All as per item No. 17 here-in-before but side rail of seat of Chair dining cushion long back .

All as per item No. 17 here-in-before but stiffener of legs of Chair dining cushion long back

All as per item No. 17 here-in-before but back rest of Chair dining cushion long back.

M & L replacement of unserviceable seat of Chair dining cushion long back with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged cushion and cover of seat of Chair dining cushion long back with new seat made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable back of Chair dining cushion long back with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged cushion and cover of back of Chair dining cushion long back with new back made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair Dining Cushion long back with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR EASY WITH CUSHION (FD-358): M & L for replacement of existing/ damaged front leg of Chair easy with cushion with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 27 here-in-before but rear leg of Chair easy.

All as per item No. 27 here-in-before but side rail of seat of Chair easy.

All as per item No. 27 here-in-before but arms of Chair easy.

All as per item No. 27 here-in-before but back rest (wooden frame) of Chair easy.

M & L replacement of existing/ damaged Plywood seat of Chair easy with cushion with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged Cushion & Cover of Seat of Chair easy with cushion with new seat made out of 75 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing / damaged Plywood back of Chair easy with cushion with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged Cushion & Cover of back of Chair easy with cushion with new back made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair easy with cushion with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Chair easy (FD-229):M & L for replacement of front leg of chair easy with new one well seasoned 1st class teak wood of size 510x55x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair easy with new one well seasoned 1st class teak wood of size 490x55x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of arms of chair easy with new one well seasoned teak 1st class wood of size 65x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat & back frame after making holes on chair easy with new one well seasoned 1st class teak wood of size 580x70x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair easy with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR WRITING (FD-280):M & L for replacement of front leg of chair writing with new one well seasoned 1st class teak wood of size 675x55x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair writing with new one well seasoned 1st class teak wood of size 890x55x30 mm, complete all as directed by Engineer in charge.

M & L replacement of Unserviceable back rest of chair writing with new one well seasoned first class teak wood shape and size as per drawing and set of 02 nos. in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of arms of chair writing with new one well seasoned 1st class teak wood of size 480x55x19 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat after making holes on chair writing with new one well seasoned 1st class teak wood of size 470x65x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of stiffener of legs of chair writing with new one well seasoned 1st class teak wood of size 25x20mm, complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair writing with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR DINING (FD-279): M & L for replacement of front leg of chair dining with new one well seasoned 1st class teak wood of size 455x55x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair dining with new one well seasoned 1st class teak wood of size 890x55x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat after making holes on chair dining with new one well seasoned 1st class teak wood of size 470x65x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of stiffener of legs of chair dining with new one well seasoned 1st class teak wood of size 25x20 mm, complete all as directed by Engineer in charge.

M & L replacement of Unserviceable back rest of chair dining with new one well seasoned first class teak wood shape and size as per drawing and set of 02 nos. in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair dining with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Chair Dining Cushioned (MAP) FD/MAP-II/04 :- M & L for replacement of old unserviceable/damaged wooden Back Rest of Chair Dining Cushioned, with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Front legs of Chair Dining Cushioned with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Rear legs of Chair Dining Cushioned with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Side Rails of Chair Dining Cushioned with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Vertical Back Rest of Chair Dining Cushioned with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Stiffner of legs of Chair Dining Cushioned with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corners of Chair Dining Cushioned with new one of well seasoned 1st class teak wood of size 75x75x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable plywood of seat of Chair Dining Cushioned with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged Cushion & Cover of Seat of Chair Dining Cushioned with new seat made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair dining with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Hat Stand With Mirror (FD-361/362):- M & L for replacement of front face of Hat Stand With Mirror with new one made out of 4mm thick plywood teak venear along with teak wood edging of size 35mm x 6mm all around sides of Hat Stand With Mirror including dismantling of old unserviceable one, shape and size as shown in drawing complete all as directed by Engr-in-charge.

M & L for replacement of old broken/damaged existing Back of Hat Stand With Mirror with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, including supply and fixing of 02 Nos bracket for hanging to wall, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L of replacement of brass peg of Hat Stand With Mirror, and supply and fixing with new brass peg of size 75mm (w) x 120mm (H) including fixing arrangements ,shape and size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable/broken mirror of Hat Stand With Mirror, with new one mirror of 5mm thick of approved quality including teak wood edging all around mirror, shape and size as shown in drawing, complete all as directed by Engineer in charge.

MEAT SAFE & MEAT LARGE (FD-370) M & L for replacement of broken/unserviceable bottom stage/frame having 04 legs,02 Nos long side stiffener & 02 Nos Short side stiffener connected to legs of Meat safe & milk large with new one made out from well seasoned 1st class teak wood, shape & size all as per drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable bottom of Meat safe & milk large with new one made out from 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable intermediate stiffener of Meat safe & milk large of size 75x1300x19 mm thick with new one well seasoned 1st class teak wood,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable front & side shutter of Meat safe & milk large with new wire gauge fixed on the frame made out from 19 mm thick wooden rail & style, SS wire gauge shall be 12 mm mesh of 20 gauge, and providing 75 mm butt hinges (02 nos.) for fixing front shutter as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged Back of Meat safe & milk large with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged hasp & staple of Meat safe & milk large with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Meat safe & milk large with new 75 mm long stainless steel butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Meat safe & milk large with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of broken marble stone of Meat safe & milk large with new white marble stone size 560x1350x17 mm thick of homogeneous texture in one piece, shape & size all as per drawing or complete all as directed by Engineer in charge.

M & L for applying two coat of synthetic white enamel paint to all exposed surface of Meat safe & milk large (FD-370) (internal & external) of any deseription,width or girth including removal of old surface with emery paper/grinding wheel & preparing the article of wooden furniture as following, shape & size as shown in drawing or complete all as directed by Engineer in charge.

SOFA SET 04/05 seater (FD-281) M & L for replacement of unserviceable leg of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 70x35x525 mm, complete all as directed by Engineer in charge.

All as per Item No 79 Here in before but short rail of Sofa set 04/05 seater of size 35x100x1090 mm.

All as per Item No 79 Here in before but long rail of Sofa set 04/05 seater of size 35x100x1590 mm.

All as per Item No 79 Here in before but arm of Sofa set 04/05 seater of size 35x70x725 mm.

All as per Item No 79 Here in before but bearer of Sofa set 04/05 seater of size 40x40x585 mm.

All as per Item No 79 Here in before but batten of Sofa set 04/05 seater of size 50x20x560 mm.

Supply only 100 mm thick cushion of Sofa set 04/05 seater of make- Sleep well feather foam of 32 density 530 mm X 560 mm covered with best quality tapestry cloth (not less than Rs.150/- per mtr.) as approved by Engineer- In- Charge/GE.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Sofa Set 04/05 Seater with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 2’x2’ (FD-293): M & L for replacement of existing broken/damaged rail of Table 2’x2’ with new one well seasoned 1st class teak wood of size 20x50x590mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 188 Here in before but leg of Table 2’x2’ of size 35x55x740 mm.

M & L replacement of existing unserviceable Top of Table 2’x2’ with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corners of Table 2’x2’ with new one of well seasoned 1st class teak wood of size 75x75x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE 2'X2' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE CENTRE (FD-274): M & L for replacement of existing broken/damaged long rail of Table centre with new one well seasoned 1st class teak wood of size 20x50x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 92 Here in before but short rail of Table centre of size 20x50x450 mm.

All as per Item No 92 Here in before but leg of Table centre of size 30x60x372 mm.

All as per Item No 92 Here in before but stiffener short of Table centre of size 20x50x430 mm.

All as per Item No 92 Here in before but stiffener long of Table centre of size 20x50x880 mm.

M & L replacement of existing unserviceable Top of Table centre with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE CENTRE with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x2’ WITH DRAWER (FD-283):M & L for replacement of existing broken/damaged long rail of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 20x110x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 99 Here in before but short rail of Table 3’x2’ W/drawer of size 20x110x600 mm.

All as per Item No 99 Here in before but leg of Table 3’x2’ with drawer of size 60x30x740 mm.

All as per Item No 99 Here in before but stiffeners long of Table 3’x2’ of size 20x40x900 mm.

All as per Item No 99 Here in before but stiffeners short of Table 3’x2’ with drawer of size 20x40x600 mm.

M & L for replacement of drawer of Table 3’x2’ with drawer with new one, frame of drawer made out of 12 mm thick BWR plywood and bottom of drawer shall be of 06 mm thick ply wood, with & including providing one knob of 25 mm dia PVC of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table 3’x2’ with drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'X2' With Drawer with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE BED SIDE MAP(FD/E6/MAP/15(R) ):M & L replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Side of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front,. shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Front of Top Drawer of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round drawer front, fixed with Stainless steel Corner brackets with 04 Nos of Screw of suitable Size to frame of drawer. Complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Front of Bottom Drawer of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round drawer front, fixed with Stainless steel Corner brackets with 04 Nos of Screw of suitable Size to frame of drawer. Complete all as directed by Engineer in charge.

M & L replacement of unserviceable back of Table bed side of 06 mm thick and commercial ply wood size 450x450 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable Handle of Table bed side of size100 mm of Stainless Steel. shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable Telescopic Channel (Set of 02)of Table bed side of size 355 mm of Stainless Steel. shape & size as shown in drawing or complete all as directed by Engineer in charge.Make- Godrej/Harrison/Hettich

M & L for replacement of square hard rubber shoe of Table Bedside MAP of any type of set of 4 nos, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE BED SIDE (FD-276):M & L replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading infront of top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable back of Table bed side of 06 mm thick and commercial ply wood size 450x410 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of shelve of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable side of Table bed side with new one of size 510x230 mm made out 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE PEG (FD-277) M & L for replacement of existing broken/damaged leg with new one well seasoned 1st class teak wood of size 30x50x362 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged rail with new one well seasoned 1st class teak wood of size 20x40x380 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table peg side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE PEG with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x3’ (FD-291):M & L for replacement of existing broken/damaged leg of Table 3’x3’ with new one well seasoned 1st class teak wood of size 55x35x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged rail of Table 3’x3’ with new one well seasoned 1st class teak wood of size 25x75x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corner of Table 3’x3’ with new one of well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing unserviceable Top of Table 3’x3’ with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'x3' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TEAPOY (FD-278):M & L for replacement of existing broken/damaged Top rail of Teapoy with new one well seasoned 1st class teak wood of size 20x50x510 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged leg of Teapoy with new one well seasoned 1st class teak wood of size 60x30x497 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing U/s Top of Teapoy with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged Top stiffener/Bottom stiffener with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TEAPOY with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE WRITING (FD-275) M & L for replacement of existing broken/damaged leg of Table writing with new one well seasoned 1st class teak wood of size 55x35x717 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffener of Table writing with new one well seasoned 1st class teak wood of size 25x50x1145 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable top rail of Table writing with new one well seasoned 1st class teak wood of size 25x50x1125 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable Box ( including 02 Vertical Sides and 01 Horizental Sides per Table) of Table writing with new 18 mm thick pre laminated particle board with exterior grade with decorative choice lamination in one side & balancing white & providing 4 mm thick teak wood beading to all around exposed front edges, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged shutter of Table writing of size as per drg with pre laminated particle board with exterior grade with decorative choice lamination in one side & balancing white & providing 4 mm thick teak wood beading to all round exposed edge of shutter and 75mm SS Handle D type and fixed with magnatic catcher of best quality and piano hinge as per required shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable back side of Table writing with new 6 mm thick BWR plywood commercial face ISI marked, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table writing W/drawer with new one, frame of drawer made out of 12 mm thick BWR plywood and bottom of drawer shall be of 06 mm thick BWR plywood & including providing one knob of 25 mm dia PVC of best quality,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of shelve of Table writing with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge

M & L replacement of existing unserviceable Top of Table writing with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE WRITING with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x2’ WITHOUT DRAWER (FD-284) M & L for replacement of existing broken/damaged stiffener long of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 20x40x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 143 Here in before but broken/damaged stiffener short of Table 3’x2’ with drawer of size 20x40x600 mm.

All as per Item No 143 Here in before but unserviceable long rail of Table 3’x2’ without drawer of size 20x60x900 mm.

All as per Item No 143 Here in before but unserviceable short rail of Table 3’x2’ without drawer of size 20x60x600 mm.

All as per Item No 143 Here in before but unserviceable leg of Table 3’x2’ W/out drawer of size 60x30x740 mm.

M&L for replacement of U/s corner of Table 3’x2’ W/out drawer with new one well seasoned 1st class teak wood of size 100x100x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing U/s Top of of Table 3’x2’ W/out drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'x2' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DINING 06 PERSONS (FD-273) M & L for replacement of U/s long rail of Table dining 6 person with new one well seasoned 1st class teak wood of size 25x100x1500 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 151 Here in before but unserviceable leg of Table dining 06 person of size 60x30x740 mm.

All as per Item No 151 Here in before but unserviceable short rail of Table dining 06 person of size 20x100x900 mm.

M & L for replacement of unserviceable corner of Table dining 06 person with new one well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table dining 06 person with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DINING 06 PERSON with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DINING 08 PERSONS (FD-273) M & L for replacement of unserviceable long rail of Table dining 08 person with new one well seasoned1st class teak wood of size 25x75x1800 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per Item No 157 Here in before but unserviceable leg of Table dining 08 person of size 40x75x740 mm.

All as per Item No 157 Here in before but unserviceable short rail of Table dining 08 person of size 25x75x900 mm.

M & L for replacement of unserviceable corner of Table dining 08 person with new one well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing unsesrviceable Top of Table dining 08 person with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DINING 08 PERSON with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DRESSING LADIES (FD-251/379): M & L for replacement of broken/unserviceable bottom stage/frame having 04 legs,02 Nos long side stiffener & 02 Nos Short side stiffener connected to legs of Table dressing ladies with new one made out from well seasoned 1st class teak wood, shape & size all as per drawing or complete all as directed by Engineer in charge.

M & L for replacement of broken/damaged mirror of Table dressing ladies with new one mirror of 05 mm thick of size 366x1220 mm of approved quality fixed to wooden frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back side of mirror of Table dressing ladies made out of 06 mm thick BWR plywood commercial for frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Box of Table dressing ladies with new one, complete box (including Top,02 sides and bottom along with internal structure inside box) made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all around edges, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table dressing ladies made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of glass pane of Table dressing ladies 05 mm thick fitted with two nos. sliding & fixed in aluminum channel of 25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back of the box of Table dressing ladies with 12 mm thick BWR plywood commercial grade of size 366x900x12 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DRESSING LADIES with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DRESSING GENTS (FD-230): M & L for replacement of broken/damaged mirror of Table dressing gents with new one mirror of 05 mm thick of size 380x760 mm of approved quality fixed to wooden frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back side of mirror of Table dressing gents made out of 06 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial of size 410x790 mm as in bottom of drawer, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table dressing gents made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Box of Table dressing gents with new one, complete box (including Top,02 sides and bottom along with internal structure inside box) made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all around edges and 02 hanging brackets fixed with screws to each table dressing box, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back of Table dressing gents made out of 6 mm thick BWR plywood of size 150x900, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of Table dressing gents batten 02 nos. on support of frame of size 35x25x1150 mm with new well seasoned 1st class teak wood including providing 02 hanging brackets fixed with screws to each table dressing gents mirror frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Trestle Store Room Wooden (FD-86(M)) :- M & L for replacement of old unserviceable/damaged wooden leg of Trestle Store room wooden with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Long rails of Trestle Store room wooden with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Cross Stiffeners of Trestle Store room wooden with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old unserviceable/damaged wooden Long Stiffeners of Trestle Store room wooden with new one well seasoned first class teak wood of shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L for applying two coats of creosote oil to all exposed surface of Trestle Store Room wooden (FD-86 (M)) (internal & external) of any deseription, width or girth including cleaning of old surface & preparing the article of wooden furniture as following, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Side Board(FD-241) : M&L for taking out old broken unserviceable leg of side board and supply & fixing new suitable leg made of Ist class teak wood of suitable size complete all as per drg and as directed.

All as per item No 182 above but front and rear long stiffener complete.

All as per item No 182 above but side stiffener complete.

M&L for taking out old unserviceable /broken back ply of side board and supply & fixing new back made out of 6 mm thick commercial grade ply wood of suitable size complete all as per drg and as directed.

M&L for taking out broken/unserviceable top of side board and in lieu of supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated particle board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins complete all as per drg and as directed.

All as per item No 186 above but sides complete.

All as per item No 186 above but Shelf complete .

M & L for replacement of drawer of Side Board made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer & 18 mm thick prelaminated board in face of drawer, providing one 75mm SS Handle D Type of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged shutter of Side Board of size as per drg with pre laminated particle board with exterior grade with decorative choice lamination in one side & balancing white & providing 4 mm thick teak wood beading to all round exposed edge of shutter and 25 mm knob PVC and fixed with magnatic catcher of best quality and piano hinge as per required shape & size as shown in drawing or complete all as directed by Engineer in charge.

Almirah med ½ H x ½ Sh (Drg No:DB-4042/2959) M & L for replacement of old damaged hasp & staple of Almirah med ½ H x ½ Sh with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing hanging Rod of Almirah med ½ H x ½ Sh with new 20 mm dia stainless steel hanging rod, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged socket of Almirah med ½ H x ½ Sh with new Socket (02 Nos per Almirah) shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Almirah med ½ H x ½ Sh with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Almirah med ½ H x ½ Sh with new 75 mm long stainless steel butt hinges (03 Nos per Door/Shutter) shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged shelves of Almirah med ½ H x ½ Sh with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Almirah med ½ H x ½ Sh with new 6 mm BWR plywood (ISI marked) commercial grade,shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Almirah med With shelves (Drg No:DB-2969) M & L for replacement of existing Unserviceable /damaged shelves of Almirah med W/sh with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face , shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged hasp & staple of Almirah med W/sh with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Almirah med W/sh with new 75 mm long SS butt hinges (03 Nos per Door/Shutter) shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Almirah med W/sh with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Almirah med w/sh with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L Removing of broken/damaged plastic cane from all types of chair's Chair dining,Chair writing,Chair easy & Stool dressing with new white plastic cane 02 mm width half round best quality & boarder with 03 mm width half round white plastic cane as approved in the godrej pattern as shown in drawing. Joints/knots of cane strif shall be under the seat frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for French polishing two coat to all exposed surface of BED PLY TOP (FD-245/246) of any description, width or girth including cleaning of old surface & preparing the article of wooden furniture as following, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 204 here-in-before but Almirah med ½ H x ½ Sh (Drg No:DB-4042/2959

All as per item No. 204 here-in-before but Almirah med With shelves (Drg No:DB-2969)

All as per item No. 204 here-in-before but Book case small. Drg No FD-237

All as per item No. 204 here-in-before but Chair dining cushion long back. Drg No FD-358

All as per item No. 204 here-in-before but Chair easy with cushion. Drg No FD-358

All as per item No. 204 here-in-before but Chair easy. Drg No FD-229

All as per item No. 204 here-in-before but Chair writing. Drg No FD-280

All as per item No. 204 here-in-before but Chair dining. Drg No FD-279

All as per item No. 204 here-in-before but Chair Dining Cushioned (MAP) FD/MAP-II/04

All as per item No. 204 here-in-before but Hat Stand With Mirror (FD-361/362)

All as per item No. 204 here-in-before but Sofa set 04/05 seater. Drg No FD-281

All as per item No. 204 here-in-before but Table 2'x2'. Drg No FD-293

All as per item No. 204 here-in-before but Table centre. Drg No FD-274/375.

All as per item No. 204 here-in-before but Table 3'x2' With drawer. Drg No FD-283

All as per item No. 204 here-in-before but Table bed side MAP. Drg No FD/E6/MAP/15 (R)

All as per item No. 204 here-in-before but Table bed side. Drg No FD-276

All as per item No. 204 here-in-before but Table peg. Drg No FD-277

All as per item No. 204 here-in-before but Table 3'x3'. Drg No FD-291

All as per item No. 204 here-in-before but TEAPOY. Drg No FD-278

All as per item No. 204 here-in-before but Table writing Drg No FD-275

All as per item No. 204 here-in-before but Table 3'x2' Withour drawer. Drg No FD-284

All as per item No. 204 here-in-before but Table dining 6 pers. Drg No FD-273

All as per item No. 204 here-in-before but Table dining 8 pers. Drg No FD-273

All as per item No. 204 here-in-before but Table dressing Ladies. Drg No FD-230/373

All as per item No. 204 here-in-before but Table dressing Gents. Drg No FD-230

All as per item No. 204 here-in-before but Side Board. Drg No FD-241

All as per item No. 204 here-in-before but Stool dressing CB. Drg No FD-282

B N ENTERPRISE (BID ID -3471954)

M/s Ganavi Enterprises (BID ID -3469039)