Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-Finance KOLLAMPARAMPIL | ₹1.6 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹1.8 LRejected-Finance | ₹1.8 L | L2 | Rejected-Finance Second Lower Bidder |
Tender Value
₹1.7 L
EMD Value
₹4,200
Closing Date
13 May 2026, 11:00 amClosed
ASST. EXECUTIVE ENGINEER, ELECTRICAL SUBDIVISION,
OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, ELECTRICAL SUBDIVISION, TDB,SOUTH NADA-SREEKRISHNASWAMY TEMPLE,MAVELIKKARA-690101
Thirichittattu Devaswom in Aranmula Group urgent repairs and replacement of old and damaged electrical installations in the temple structure, stage, and surrounding yard lighting
2026_TDB_849584_1
AEE/EL/ET-72/2026-27
Open Tender
Electrical Works
30 days
OFFICE OF THE ASST. EXECUTIVE ENGINEER
Please refer Tender documents.
7 documents required · 7 mandatory
₹590
₹4,200
2 Jun 2026
8 May 2026
13 May 2026
8 May 2026
13 May 2026
8 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Urgent repairs and replacement of old and damaged electrical installations in the temple structure, stage, and surrounding yard lighting | ||||||
| 1.001 | OD417515/2025-2026:Dismantling and removing the existing damaged electrical installations and stacking carefully - Labour engaged : Wireman | - | no | 1,217.21 | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | OD417516/2025-2026:Dismantling and removing the existing damaged electrical installations and stacking carefully - Labour engaged : Wireman Helper | - | no | 690 | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | 90.3.20.3:Supply & installation of light fittings on TW round block
Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture | - | each | 1,273.18 | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | OD417520/2025-2026:Supplying and fixing 12W LED bulb to the existing points | - | no | 105.38 | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. | - | each | 126.42 | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD417527/2025-2026:Supply and fixing 200mm Plastic sill | - | 1 nos | 39.61 | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | 4,665.37 | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply | - | each | 2,244.96 | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps | - | metre | 716.71 | - | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
priliminaryagreement.pdf
Tender Documents • 0.33 MB
specialcondition.pdf
Tender Documents • 0.24 MB
approvedmaterials.pdf
Tender Documents • 0.51 MB
BOQ_1435719.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid