Loading…
Loading…
Tender Value
₹39.0 L
EMD Value
₹38,979
Closing Date
3 Feb 2026, 6:00 pmClosed
DISTRICT PROJECT CO-ORDINATOR,CHHOTAUDEPUR
Construction of 03 Classroom Framed Structure in Kotabi-1 Primary School of Kawant Taluka in Chhotaudepur District.
268913
SS/TASP/ACR/CHHOTA/06
Open
Civil - All
Chhota Udaipur
1 document required · 1 mandatory
₹1,500
Yes
DIST PROJ COOR JILLA AYOJAN BOR VILL PRAYOJNA VAHIVAT VIKASSHIL TA CHHOTAUDEPUR
₹38,979
Yes
23 Jan 2026
23 Jan 2026
23 Jan 2026
3 Feb 2026
23 Jan 2026
No. L.C L.C Unit Amount
Excavation for foundation upto 1.5 m depth including sorting out and
stacking of useful materials and disposing off the excavated stuff upto
Meter lead.(B) 244.35 148.19 1.48 149.67 Cmt
Dense or hard soil
CH-4 ITEM CODE 04001B PG-46
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting
out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(B) 210.76 160.77 1.61 162.38 Cmt
Dense or hard soil
CH-4 ITEM CODE 04002B PG-46
Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded
stone aggregate 20 mm nominal size) & curing complete excluding cost of form 7.39 3535.40 35.35 3570.75 Cmt
work Below Tie beam & Plinth protection.
CH-5 ITEM CODE 05010AA PG-48
Providing and laying controlled cement concrete M.150 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in (A) Foundations, footings,Base of columns 14.05 3963.89 39.64 4003.53 Cmt
4 and Mass concrete (Cement Level 290 Kg)
Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. in foundationand plinth in Cement Mortar 1:6. (1‐ 27.98 4725.60 47.26 4772.86 Cmt
Cement : 6 ‐finesand)(C) Fly Ash Bricks
CH-6 ITEM CODE 6002CA PG-58
Filling with the available excavated earth (excluding rock) in trenches, plinth,
sides of foundation etc. in layers not exceeding 20cm in depth consolidating each 384.60 129.10 1.29 130.39 Cmt
deposited layer by ramming and watering.
CH-4 ITEM CODE 04006 PG-47
thickness inculding watering, ramming and consolidation etc. complete. 93.62 286.20 2.86 289.06 Cmt
CH-4 ITEM CODE 04008A PG-47
Providing and laying controlled cement concrete M.250 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in (a) Foundations, footings Bases of columns and 89.72 4214.00 42.14 4256.14 Cmt
8 the like and Mass conrete work in footing. (Cement Level 380 Kg)
Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand :8 hand
brocken stone aggregates of 40mm nominal size) in plinth and curing complete 16.83 2653.67 26.54 2680.21 Cmt
excluding cost of formwork.
CH-5 ITEM CODE 05004A PG-49
Providing and laying controlled cement concrete M.250 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Plinth Beams. (Cement Level 380 Kg) 11.53 6071.00 60.71 6131.71 Cmt
Brick work using common burnt clay building bricks having crushing strength not
less than 35Kg./Sq.Cm. for superstructure in cement mortar 1:6(1 cement :6 fine
sand) including curing etc. complete. (C) Fly Ash Bricks For all heights and all 59.39 4991.25 49.91 5041.16 Cmt
CH-6 ITEM CODE 6002CA +6006C PG-58
Half brick in common brunt clay building bricks having crushing strength not less
than 35 Kg/sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) (C) Fly Ash
Bricks in super structure including curing etc. complete.For all floors 27.10 645.22 6.45 651.67 Smt
CH-6 ITEM CODE 6008A2A +6010B PG-59/60
Providing and laying controlled cement concrete M.200 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Beams for all floors level. (Cement Level 360 Kg) 16.10 6027.00 60.27 6087.27 Cmt
Providing and laying controlled cement concrete M.250 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Column Up to Plinth & all floors.. (Cement Level 7.82 7156.00 71.56 7227.56 Cmt
Providing and laying controlled cement concrete M.200 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Column for all floors level. (Cement Level 360 20.55 7093.00 70.93 7163.93 Cmt
Providing and laying controlled cement concrete M.200 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Slab for all floors level. (Cement Level 360 Kg) 27.63 6759.00 67.59 6826.59 Cmt
Providing and laying controlled cement concrete M.200 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in sloping slabs & Staircase having thickness more 2.43 5520.00 55.20 5575.20 Cmt
17 than 10 cm and upto 20 cm thickness.For all floors. (Cement Level 360 Kg)
Providing and laying controlled cement concrete M.200 for curing complete
including cost of formwork and excluding cost of reinforcement for
reinforced concrete work in Chhajja for all floors level including finishing 16.10 6551.00 65.51 6616.51 Cmt
18 with cement mortar 1:3 ( 1 cement :3 Sand ) and curing etc complete. (Cement
Level 360 Kg)
Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark) Confirmed to
IS-1786 for R.C.C.work including Cutting, bending, binding and placing in 16572.10 75.46 0.75 76.21 Kg
position etc. complete.For all floors
CH-5 ITEM CODE 05014C PG-50
Providing 10mm thick cement plaster in single coat on on brick/concrete walls &
Ceilling & Soffit of stair interior plastering in cement mortar 1:4(1 cement 4 sand)
watering, curing etc. complete.For all floors 297.32 172.47 1.72 174.19 Smt
CH-17 ITEM CODE 17001B+17004A PG-89
Providing 15mm thick cement plaster in single coat on rough or fair side of single
or half brick wall for interior plastering in cement mortar 1:4(1 cement 4 sand) 579.20 233.58 2.34 235.92 Smt
watering, curing etc. complete.For all floors
CH-17 ITEM CODE 17002A+17004A PG-89
20mm thick sand faced cement plaster on walls above ground level consisting of
12mm thick backing coat of cement mortar 1:3(1 cement 3 sand) and 8mm thick
finishing coat of cement mortar 1:1(1 cement 1 sand) watering, curing 368.18 326.03 3.26 329.29 Smt
etc.complete for any Height.
CH-17 ITEM CODE 17009 PG-89
Provinding & applying three coat of 100% acrylic base matt finishing
exterior paint of approved manufacture of required shade on external surface to
23 give an even shade after throughly brushing the surface free from morter dropping
& other foreign matter
Providing & laying 24"x24" vitrified 8mm thick tiles flooring over 20mm
(average) base of cement mortar 1:6(1cement:6course sand) on new surface or
fixing on exiting flooring by adhesivematerial including dismentalling of existing
flooring and jointed with colour cement slurry including finish with flush pointing 188.87 1383.99 13.84 1397.83 Smt
24 and cleaning the surface etc. complete for antiskid.(As Per List of Approved
Materials) for Light/Dark shade as per the given pattern.
(Item No- 14021A , Pg No- 85)
Providing and laying 25 mm th. Polish Kota stone slab flooring over 20mm.
(average) base of cement mortar 1:6 (1 cement :6 coarse sand) of L.M. 1:1.5
25 and laid and jointed with grey cement slurry including rubbing and polishing
(Item No- 14.43 , Pg.No. 84)
Providing & laying cement concrete flooring over 40 mm (average) thick
base of cement flooring 1:2:4 (1cement:2 coarse sand:4 graded stone
26 aggregates 20mm normal size) laid in one layer finished with a floating coat of
neat cement curing etc. complete.
(Item No-14.71 , Pg.No. 85)
Providing cement vata (10cmx10cm size)quarter round in cement mortar 1:1
including neat cement finishing,watering etc. complete ) 73.06 23.45 0.23 23.68 Rmt
Providing & Fixing in position M.S.Angle 40mmx40mmx6mm Angle frame
for door and 35mmx35mmx5mm angle frame for shutters,18 gauge iron sheet of
28 shutters with 4 nos.of hold fasts for door as per the approved drawong & design 17.13 101.60 1.02 102.62 Smt
including applying a priming coat.( Pg No-68) Sr.No. 10025AA
Providing & Fixing in position M.S.Angle 35mmx35mmx6mm frame for
windows & ventilation 25mmx25mmx5mm angle frame for shutters, 18 gauge
29 iron sheet of shutters with 4nos. Of hold fasts for windows & Ventilation as per 14.25 101.60 1.02 102.62 Smt
the approved drawing & design including applying a priming coat..( Pg No-68)
Providing & fixing M.S. Railing & M.S grill as per approved drawing & design
30 including one coat of red lead paint etc. complete.( Pg No-68 Sr.No100 25AA 720.41 101.60 1.02 102.62 Kg
Painting two coats (Excluding Priming coat) on new steel and other metal,
surfaces with enamel paint, brushing,interior to give an even shade including
cleaning the surface of all dirt, dust and other foreign matter etc,complete 123.54 86.94 0.87 87.81 Smt
(Item No-19.7 , Pg.No. 93)
Providing & fixing G.I rain water Spout of 65mm dia and 60cm length. RA
Distempering with dry distemper of approved brand and manufacture (Three
Coats) and of required shade on wall surface to give an even shade, over and
including a priming coat of whiting after throughly brooming the surface free from 764.36 60.80 0.61 61.41 Smt
33 mortar dropping and other foreign matter.
(Item No- 18.38, Pg.No. + 18.40 Pg.No. 91 )
Providing and fixing Chicken mesh jali (22 gauge)30cm wide at the junction of
different surfaces of different material component at the time of plastering to
34 prevent cracking in plaster surface as and where directed at all floors with all leads 318.38 45.00 0.45 45.45 Rmt
and lifts etc.complete.RA
Total Rs.
Total Say Rs.
I / WE am / are willing to carry out the work at ________ % above / below (percentage should be written in figures and words) of
Estimated amount put to tender Rs. ________________
Deduct / Add: _____ % below / above Rs. ________________
Net Amount Rs. ________________
in words _____________________________________________________________
(Please strike out which ever is not applicable)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
3 ACR BOQ Kawant.pdf
Drawing.pdf
SPECIFICATION.pdf
SS.TASP.ACR.CHHOTA.06.pdf
Download all tender documents and submit your bid