CONSTRUCTION OF AUDITORIUM/OPEN AIR THEATRE AT MC YAMUNANAGAR-JAGADHRI

Amount

Providing and fixing 60 watt LED street lights of make - SYSKA,PHILIPS,CROMPTON,HALONIX.

Supply of 16 Sqmm 4 Core Armd cable, LT Power Cables - Aluminium Conductor HAVELLS BRAND Power Cables, Solid Aluminum Conductor up to 10 sq. mm and Balance Stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed complete in all respect upto the entire satisfaction of Engineer-in- charge (Make : Grandlay, Polycab, Pymen ).

Supply of 20 watt led down concealed light(MAKE-WIPRO,SYSKA,PHILIPS,ORIENT)

Supply and fixing of 40 watt tube light(MAKE-WIPRO,SYSKA,PHILIPS,ORIENT)

Providing and fixing MS box for concealed light

SUPPLYING , INSTALLATION , TESTING and COMMISIONING OF 13 PASSENGER LIFTS OF FOLLOWING SPECIFICATION HAVING 5 STOP S AND APPROXIMATE TRAVEL DISTANCE OF 24 M HAVING FOLLOWING SPECIFICATIONS Product DescriptionElevator SpecificationsNumber of Persons 15Rated Load 1020 kgNumber of stops 5Number of Access sides 1Floor designations B,S , 1 ,2,3Drive System Alternating Current Voltage Frequency (ACVF)Type of controller Full Collective control - SimplexSpeed of travel 1.5m/sCar Size 1575 mm (W) x 1500 mm (D) x 2239 mm (H)Door Width 900 mmDoor Height 2100 mmRated output motor 7.7 kwCar DesignCar walls finish in Stainless Steel HairlineLED spot in ceilingCar doors finish in Stainless Steel HairlineCar door in Stainless steel finishGranite Flooring finish in Black SeaDeco Ceiling finish in Stainless Steel Mirror 304Full height mirror on rear car panel Car Operating PanelStylish, touch sensitive glass panelDoor open/close and alarm buttons

`Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make Auditorium chair with fabric upholstered Auto tip up chair (Seats Folds Automatically when chair will not in use)conforming to BIFMA standards with 3mm MS Sheet base component and 2mm thick tubular MS Pipe for Auto-tip seat movement with coil spring. The chair to have centre to centre distance of 535 to 560mm and to be mounted on double foot made out of MS tubular section. The chair shall have powder coating not below 40 microns on all exposed MS framework. The seat cushion shall have Polyurethane moulded foam of Density 40 plus -5 KG /cum with Polypropylene plastic cover. The chair backrest to integrate moulded hot pressed ply of 15mm thickness and back PU of density of 40 plus -5Kg /cum. The height of the back to be 950-1050mm from the ground to top of the Back and for the seat to be 400-450mm from the ground. The full backrest assembly of the chair to be fabric cladded. The chair to be upholstered in fire retardant treated fabric with 5mm foam lamination for durability and comfort. The wooden / PP armrest to be of 80mm and 400mm length in black colour. The armrest between two chairs in a row to be shared and at both ends to be individual, including fixing of the chair with expandable fasteners of M8X100 length of on M20 hard RCC/PCC floor, complete as per drawings, specifications and direction of Engineer-in-charge. Key Specs: • Arm rest Frame-Moulded PU with commercial ply and PP cover integrated with MS pipe of 2mm thickness. • Wooden Armrest with Melamine finish /PPCP armrest with waterfall edge. • Thickness : Seat cushion PU pad: 120 plus 5 mm, Backrest PU pad: 120 plus 5mm. • fix Back rest . • Chair height from Floor 920 to 1050 mm. • Chair CD-535mm - 560 mm . • Chair Depth- 500 To 600 mm in tipping up condition ,680mm to 760mm in non tip up condition. • Powder Coating-Not below 40 Microns on all exposed MS parts. • Seat Number-Embroidery / Sticker. • Quilting design-Horizontal / Vertical. • Chair Cushion Height from Floor-400mm to 450mm. • Chair Mechanism-Auto Tip-up Cushion with Spring mechanism. • Seat Assembly-Moulded PU supported by hot pressed moulded ply of 15mm thickness. • Seat cushion size-460mm width X 460mm depth. • Backrest size- 460mm width X 460mm depth • Fabric-100% polyester stretchable circular Knit fabric with GSM not less than 250 with 5mm soft foam lamination. • FR Treatment- Fire Retardant Treated Fabric can provide on additional price. • Chair Cushion Density- Seat Density : 40 plus 5 Kg/m3 • Chair Backrest Density-Backrest Density : 40 plus 5 Kg/m3. • Seat cushion PU pad: 120 plus 5 mm, • Backrest PU pad: 120 plus 5mm • Coil Spring Metal Grade- Rocking Coil Spring Steel IS: 4454 1981 Grade II tested for 500000 cycle. • Sheet Metal /IS: 1079 1994 Type O and IS: 513 -HRCA 2mm thickness MS tubular framework welded together with continuous mig welding and duly powder coated. • Seat Foot Design-Double Foot. • Grouting Bolts-Expansion Bolts 100 mm ( 4 inch ) of length - Mechanical Expansion bolts of Hilti/Fischer make of size M8X100mm for seat fixing depending on flooring of M20 of 1:2:4 of Ratio or 4`` RCC`

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make 3 Seater Sofa for Auditorium.

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make 3 Seater Sofa.

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make Single seater Sofa.

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make of Size: 2110 MM L * 2010 MM W * 1110 MM Ht, Header. Made of combination of Wood and Commertial ply of 18 mm Thick and Outer sayface shall be duly Laminated / Duko painted. Bed sghall be supplied with 7-Zone Latex Mattress (With Memory Foam) and two Pillow and one white Cotton Bed Sheet.

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make Coffee table of Size: 915 mm L * 915 mm D * 401 mm Ht. With 8 MM thick clear Touffned Glass on Top. Table made of MDF with DUKO Piant/Polish.

`Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make Coffee Table Small jr. Size : Ht 450 mm x W 899 mm x D 450 mm With 8 MM thick clear Touffned Glass on Top. Table made of MDF with DUKO Piant/Polish.`

Manufacturing, Supplying and installation of Evershine Designs and Furnishers Make Corner Table of Size: Ht 559 mm x W 406 mm x D 381 mm. With 8 MM thick clear Touffned Glass on Top. Table made of MDF with DUKO Piant/Polish.

FA- 1 `Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm` `/ detection control panel ( having nos. of loops to suit minimum 20% extra over the nos. of fire detector), The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes.` Further, the panel must be able to automatically switch `ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7??TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet ` Steel powder coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. `The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt` `SMF lead acid batteries of Exide / SF / Panasonic make capable of running for a minimum of 24 hours with battery charger complete as required and conforming to ` `BS5839 standards. Duly Approved by EN 54/UL/VDS/ with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` a Main Fire Alarm Control Panel 6 LOOP (To Be placed on G.F. Floor)

FA- 1 `Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm` `/ detection control panel ( having nos. of loops to suit minimum 20% extra over the nos. of fire detector), The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes.` Further, the panel must be able to automatically switch `ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 character L C D unit/ 5.7??TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet ` Steel powder coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80LED Indicators. The Panel shall have 3 Serial Ports. `The panel shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt` `SMF lead acid batteries of Exide / SF / Panasonic make capable of running for a minimum of 24 hours with battery charger complete as required and conforming to ` `BS5839 standards. Duly Approved by EN 54/UL/VDS/ with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` b. Fire Alarm Panel 4 Loop at each floor

FA- 2 `Supply, Installation, Testing and commissioning of intelligent Analog Addressable type smoke detector that combine photo Electronic and fixed temp thermal with inbuilt isolator or isolator base complete with LED Hard `

FA- 3 `Supply, Installation, Testing and commissioning of intelligent Analog Addressable type Laser based smoke detector suitable for early detection of fire in IT room/computer room etc with inbuilt isolator or isolator base complete with LED Hard Addressable having rotary decade Address switches with Mounting Base ` `Complete as required conforming to BS 5839 standards and duly approved `

FA- 4 `Supply, Installation, Testing and commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to ` BS5839 standards and duly approved .. Charge.

FA- 5 `Supply, Installation, Testing and commissioning of Addressable Loop powered sounder with strobe / flasher complete with mounting base as required conforming to ` BS5839 standards and duly approved .. Charge.

FA- 6 `Supply, Installation, Testing and commissioning of Glow Type EXIT/Stair` /Emergency Exit Sign Board as finalized by Engineer In Charge, photo luminescent of size `300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class ` `– 1 material PSPA fixed on 3 mm acrylic sheet on both side showing` marking (running man, Arrow and Exit) and `hanged with the ceiling with chain and fastenerwith . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FA- 7 `Supply, Installation, Testing and commissioning of Analog Addressable type Active Repeater fire alarm panel with Backlit LCD Display, having controls for reset, mute, Accept, Silence alarms and self test conforming to BS5839 standards and duly approved by ` EN54/UN54/VDS . Charge.

FA- 8 `Supply, Installation, Testing and commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/ voltage monitoring shall be compliant to EN54/UL/VDS. (In case of 2 monitoring features in one module (points) both point shall be consided as single unit for payment) .` of Engineer In Charge.

FA- 9 `Supply, Installation, Testing and commissioning of Addressable Control Relay` Module with flexible network structures with a `maximun switching current of 1A @ 30V DC, shall be having EN54/UL/VDS Certification with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FA- 10 `Supply, Installation, Testing and commissioning of SITC of minimum 1000 mtr. Range (Kheraj make) SIREN generator provided at the roof of the building with separate power supply, relay etc .`

FA- 11 `Supply and erection of Duct type smoke detector with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FA- 12 `Supply, installation, testing and commissioning of 2 core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc. including the cost of all petty material required to complete the job upto entire specifications of Engineer- in – charge and with the 3 years free comprehensive warranty period.`

FF- 1 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA a) 150 mm dia

FF- 1 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA b)100 mm dia

FF- 1 Supply, Installation. Testing and `Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating` `, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 ` `Year free comprehensive warranty period, upto the entire satisfaction of` Engineer In Charge.(Under ground) Make : JINDAL/TATA c)80 mm dia

FF- 2 `Supply. Installation. Testing and Commissioning of c- class M.S. pipes conforming to IS:1239, Including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges welded or screwed joints etc. as required, making good complete . of` Engineer In Charge.(Above ground) Make : JINDAL/TATA a)150 mm dia

FF- 2 `Supply. Installation. Testing and Commissioning of c- class M.S. pipes conforming to IS:1239, Including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges welded or screwed joints etc. as required, making good complete . of` Engineer In Charge.(Above ground) Make : JINDAL/TATA b)80 mm dia

FF- 3 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar a 80 mm dia

FF- 3 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar b 100 mm dia

FF- 3 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` c 150mm dia

FF- 4 `Supply. Installation. Testing and Commissioning of 150mm dia Sluice Valve as per IS-14846. complete with flanges, gasket, nut bolts .` of Engineer In Charge. Make : KARTAR

FF- 5 `Supply, installation, testing and commissioning of Fire Hydrant Valve (Landing Valve), bearing to IS:5290 mark. ` S.S., 63mm. oblique instantaneous single outlet, 75mm. `N.B. flangod inlet, spindle, complete with PVC blank cap., G.l. chain etc. .` Charge. Make : ULTRA FIRE

FF- 6 `Supply, installation, testing and commissioning of Branch Pipe, S.S.. short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm bore nozzle, as per IS.318 ` LTB2/1S-903 with Make : ULTRA FIRE

FF- 7 `Supply, installation, testing and commissioning of Fire Hose, RRL hose jacketed with circular woven synthetic fibre, conforming to IS: 638:88. 63mm.dia.x 15Mtr long with SS heavy duty. 63mm. 2 pair of male and female instantaneous couplings, having IS: 903 mark with duly ` `S.S. wire wounded The hose shall be rolled and hug to suitable M. S. support in the Fire Station, with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : ULTRA FIRE

FF- 8 `Supply, Installation. Testing and Commissioning of weather proof standard FireHose Cabinet box, with 5mm thick Single Glass Door, 18 SWG SS 304 sheet fabricated, including Lock and Key with PO Red Paint, rubber bidding, complete in all respect for external, Size ` 900x750x250. . Charge. Make : ULTRA FIRE

FF- 9 `Supply, Installation, Testing and Commissioning of 4 way Fire brigade inlet with 63 mm dia instantaneous inlet as per IS:904 complete with all necessary fittings, ` `of petty material required to complete the work upto the entire satisfaction of Engineer In` Charge. Make : ULTRA FIRE

FF- 10 `Supply, Installation. Testing and Commissioning of 150 mm dia Dual Plate Non Return Valve 150 mm dia, as per ` IS-14846,comp!ete with flanges, gasket, nut bolts . Charge. MAKE : KARTAR

FF- 11 `Supply, installation, testing and commissioning of Manual Swing Type First aid Fire Hose Reel conforming to IS: 444 complete with heavy duty reel, 19mm dia.x ` `30Mtr. long, 2-ply polyester yarn braided /rubber braided pressure hose with heavy duty nylon on/off jet/spray nozzle, 25mm isolating valve .` Charge. Make: ULTRA FIRE

FF- 12 `Supply. Installation. Testing and Commissioning of Pressure Gauge with gauge cock .` of Engineer In Charge. Make: FIEBIG/H.GURU

FF- 13 Supply. Installation, Testing and `Commissioning of Air cushion Tank (200mm dia x 1000mm height) fabricated from MS` Sheet with dish ends, including fittings/accessories, with 2 coats of Primer and P.O.Red Enamel Paint (Locally `Fabricated) with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.

FF- 14 `Supply, Installation, Testing and Commissioning of 25 mm dia Air Relese Valve with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :KARTAR

FF- 15 `Supply. Installation. Testing and Commissioning of Electric driven Terrace pump capacity 900 lpm.10 HP @ ` `30 MWC Head complete with base plate, coupling guard, foundation bolts .` Charge. Make:KIRLOSKAR/CG/ABB

FF- 16 `Supply. Installation, Testing and Commissioning of 25 mm dia Gate Valve 25 mm dia with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make :KARTAR

FF- 17 `Supply and Fixing of Carbon Standard Fire Man Axe with .` material required to complete the work upto the entire satisfaction of Engineer In Charge.

FF- 18 `Supply and fixing of 6kg ABC type fire extinguisher as per IS:15683(6 kg.) .` of Engineer In Charge. Make: ULTRA FIRE

FF- 19 `Supply and fixing of 4.5kg C02 gas type fire extinguishe as per IS: 15683(4.5 kg.) .` of Engineer In Charge. Make : ULTRA FIRE

FF- 20 `Providing and Fixing of MS angle iron frame duly painted, of standard height suitable to hold 3 buckets at a time and Gl Filled sand Buckets painted RED complete .` Charge.

FF- 21 `Providing Elelctric Shock Treatment Chart of standard size duly framed and covered with 5 mm thick glass etc. complete In all respects including the cost of all petty material required to complete the job upto entire specifications of` Engineer-in – charge.

FF- 22 `Providing and laying antishock rubberised mat of 12mm thickness for Pump House chamber complete in all respect` `comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In` Charge.

FF- 23 `Supply, Installation. Testing and Commissioning of Horizontally Centrifugal Single Stage Electric driven fire pumping set having capacity 2280 Lpm @ 70 MWC ` `Head complete with base plate, coupling guard, foundation bolts., with TEFC Motor suitable for 415V ` ±10%, 3 Phase 50 Hz AC supply of suitable HP for above `Pump running at 2900 RPM with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FF- 24 `Supply, Installation, Testing and Commissioning of Jockey pump having capacity 180 lpm @ 70 MWC Head with 15 ` `HP TEFC Motor complete with base plate, coupling guard, foundation bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :Kirloskar/CG/MATHER and PLATT `comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In` Charge.

FF- 27 `Supply, Installation. Testing and Commissioning of Pressure Switch, inclduing wiring and connenction with ` Motor Control Panel for Automation of Panel . Charge. Make:lndfoss/Danfoss

FF- 28 `Supply, Installation, Testing and Commissioning of Pressure Gauge 100/80 mm dia with calibration of 0-14 ` Kg /Sq.Cm. . Charge. Make : FIEBIG/H.GURU

FF- 29 `Providing and fixing MS Class „C? diesel engine exhaust pipe (including all fittings, clamps, steel support etc.) of 100mm dia for the engine. The pipe shall be insulated with 100 mm thick mineral wool insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet and with the 3 years free comprehensive warranty period.`

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA a)200 mm dla

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA b)150 mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA c)100 mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA d)80 mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA e)25 mm dia

FF- 31 `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . of` Engineer In Charge. Make: KARTAR a) 200 mm dia (Gear operated)

FF- 31 `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . of` Engineer In Charge. Make: KARTAR b) 150 mm dia (Lever operated)

FF- 32 `Supply. Installation. Testing and Commissioning of 200 mm dia Y type strainer complete with flanges, gasket, nut bolts etc. .` Charge. Make : KARTAR

FF- 33 `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :Kartar a)150mmdla

FF- 33 `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make :Kartar b)80 mm dia

FF- 34 `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . of` Engineer In Charge. Make : Kanwal a)l50 mm dia

FF- 34 `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . of` Engineer In Charge. Make : Kanwal b)80 mm dia

FF- 35 `Supply. Laying, Testing and Commissioning of Cabling for pump complete with base saddle, lugs, ferrule laid in ground/wall as required . of` Engineer In Charge. Make : Havells/RR/Finolex a) 2 x 1.5 Sqmm Copper Armoured Cable

FF- 36 `Providing and fixing type air versel of 300mm dia 1.5m height fabricated for out of 10mm thick MS plate suitable for 7 kg/cm2 working pressure complete with 25mm air release valve, safety valve, pressure gauge etc. as required.` `The air vesel shall be continous welded construction and painted with two coats of postal red enamel outside over a coat of primer and epoxy paint inside. complete in all respect upto entire satisfaction of the Engineer-in- `

FF- 37 `Supply, Installation. Testing and Commissioning of 25 mm dia Air Release Valve 25 mm dia with required fittings .` of Engineer In Charge. Make : KARTAR/SANT/ZOLOTO/LIFE GUARD

FF- 38 `Supply. Installation. Testing and Commissioning of Draw Out Connection 100 mm dia. .` of Engineer In Charge. Make: Newage/MINIMAX/FYRMAX/SAFGUARD

FF- 39 `Supply. Installation. Testing and Commissioning of 100 mm dia Foot Valve 100 mm dia. .` of Engineer In Charge. Make : KIRLOSKAR/KARTAR

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA a) 150 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA b) 100 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA c) 80 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) d) 65 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA e) 50 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) f) 40 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) g) 32 mm dia

FF- 40 `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends.` Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . of Engineer In Charge.(Above Ground) Make: JINDAL/TATA h) 25 mm dia

FF- 41 `Supply. Installation. Testing and Commissioning of of Pendant type Sprinkler 68 deg. with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make : AQUA/HD/TYCO

FF- 42 `Supply. Installation, Testing and Commissioning of of Upwright type Sprinkler. with . material required to complete the work upto the entire` Make : TYCO

FF- 43 Providing, fixing, testing and commissioning of `U.L.listed corrugated SS-304 Braided flexible sprinkler pipe droplet for 12 kg/ sq. cm. working pressure with 1/2`` BSP threaded outlet ` `and 1`` BSP threaded inlet with reducer nipple, snap, clamp, T-bar bracket etc. with necessary fitting complete as required. 1500 mm Length ` Make: Tyco

FF- 44 `Supply. Installation, testing and Commissioning of Normal type Rosette Plate for sprinkler with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FF- 45 `Supply, installation. Testing and commissioning of 150 mm dia Butterfly Valve with flange, gaskets nut bolts ` `Complelte in all respects with . material required to complete the work upto the` entire satisfaction of Engineer In Charge. Make : SIR/Kalpna/Kartar

FF- 46 `Supply. Installation. Testing and commissioning of 150 mm dia Flow Switch complete in all respect. .` Charge. Make:- System Sensor

FF- 47 `Supply. Installation. Testing and Commissioning of 150 mm dia Installation Control Valve Assembly complete in all respects .` Charge. Make : HD/Equivalent

FF- 3 `Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge.` Make : Kartar d 200mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA e)65mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA f)50 mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA g)40 mm dia

FF- 30 `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire` satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA h)32 mm dia

FF- 48 `Supply and Installation of 50 mm dia Ball Valve 50 mm dia .` Charge. Make : Kartar

HVAC 1 Supplying, installation, testing and commissioning of Air Cooled VRV/VRF units ( Heating and Cooling) with scroll Compressor capable of modulating capacity i.e. it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating and cooling both. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild steel panels coated with powder coated finish.The outdoor unit shall have scroll compressors and be able to operate even in case of breakdown of one of compressor. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping etc. Condensor Shall have with Hydrophlic Coating and Corrision Resistance Black Coating .All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor.The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU.(Chinese/Third party Manufacturing Machinery is not Acceptable) 1 Outdoor Unit Supplying, Installation Testing and Commissioning Including vacumising, Gas charging,floor mounting stands of Modular type outdoor units equipped with highly efficient scroll compressors, with all Inverter Scroll type compressor(s), special acryl pre-coated heat exchanger, low noise condenser fan, auto check function for connection error etc, centralized controller for individual control complete as per OEM specifications of Following Capacity. COP of system 3.7 at 100% load and 7.50 at 50% at AHRI conditions. All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor. The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU. All Bidders has to submit the test certificates along with the delivery of VRF/VRV Units at site. A draft Format of the same need to be submitted along with in the Technical Bid.(Chinese Manufacturing Machinery is not Acceptable) Make- Daikin, LG , Mitsubhishi, O Genral 1 ) 60 HP (20 HP X 3 ODU Top Discharge)

Supplying, installation, testing and commissioning of Air Cooled VRV/VRF units ( Heating and Cooling) with scroll Compressor capable of modulating capacity i.e. it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating and cooling both. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild steel panels coated with powder coated finish.The outdoor unit shall have scroll compressors and be able to operate even in case of breakdown of one of compressor. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping etc. Condensor Shall have with Hydrophlic Coating and Corrision Resistance Black Coating .All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor.The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU.(Chinese/Third party Manufacturing Machinery is not Acceptable) 1 Outdoor Unit Supplying, Installation Testing and Commissioning Including vacumising, Gas charging,floor mounting stands of Modular type outdoor units equipped with highly efficient scroll compressors, with all Inverter Scroll type compressor(s), special acryl pre-coated heat exchanger, low noise condenser fan, auto check function for connection error etc, centralized controller for individual control complete as per OEM specifications of Following Capacity. COP of system 3.7 at 100% load and 7.50 at 50% at AHRI conditions. All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor. The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU. All Bidders has to submit the test certificates along with the delivery of VRF/VRV Units at site. A draft Format of the same need to be submitted along with in the Technical Bid.(Chinese Manufacturing Machinery is not Acceptable) Make- Daikin, LG , Mitsubhishi, O Genral 2 ) 48HP (16 HP X 3 ODU Top Discharge)

HVAC-3 Supplying, installation, testing and commissioning of Air Cooled VRV/VRF units ( Heating and Cooling) with scroll Compressor capable of modulating capacity i.e. it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating and cooling both. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild steel panels coated with powder coated finish.The outdoor unit shall have scroll compressors and be able to operate even in case of breakdown of one of compressor. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping etc. Condensor Shall have with Hydrophlic Coating and Corrision Resistance Black Coating .All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor.The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU.(Chinese/Third party Manufacturing Machinery is not Acceptable) 1 Outdoor Unit Supplying, Installation Testing and Commissioning Including vacumising, Gas charging,floor mounting stands of Modular type outdoor units equipped with highly efficient scroll compressors, with all Inverter Scroll type compressor(s), special acryl pre-coated heat exchanger, low noise condenser fan, auto check function for connection error etc, centralized controller for individual control complete as per OEM specifications of Following Capacity. COP of system 3.7 at 100% load and 7.50 at 50% at AHRI conditions. All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor. The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU. All Bidders has to submit the test certificates along with the delivery of VRF/VRV Units at site. A draft Format of the same need to be submitted along with in the Technical Bid.(Chinese Manufacturing Machinery is not Acceptable) Make- Daikin, LG , Mitsubhishi, O Genral 3 ) 40HP (20 HP X 2 ODU Top Discharge)

HVAC 4 Supplying, installation, testing and commissioning of Air Cooled VRV/VRF units ( Heating and Cooling) with scroll Compressor capable of modulating capacity i.e. it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating and cooling both. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed from rust-proofed mild steel panels coated with powder coated finish.The outdoor unit shall have scroll compressors and be able to operate even in case of breakdown of one of compressor. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping etc. Condensor Shall have with Hydrophlic Coating and Corrision Resistance Black Coating .All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor.The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU.(Chinese/Third party Manufacturing Machinery is not Acceptable) 1 Outdoor Unit Supplying, Installation Testing and Commissioning Including vacumising, Gas charging,floor mounting stands of Modular type outdoor units equipped with highly efficient scroll compressors, with all Inverter Scroll type compressor(s), special acryl pre-coated heat exchanger, low noise condenser fan, auto check function for connection error etc, centralized controller for individual control complete as per OEM specifications of Following Capacity. COP of system 3.7 at 100% load and 7.50 at 50% at AHRI conditions. All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor. The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identicle of the ODU. All Bidders has to submit the test certificates along with the delivery of VRF/VRV Units at site. A draft Format of the same need to be submitted along with in the Technical Bid.(Chinese Manufacturing Machinery is not Acceptable) Make- Daikin, LG , Mitsubhishi, O Genral 4 ) 32HP (16 HP X 2 ODU Top Discharge)

HVAC -5 2 Indoor Units 2.1 Supplying, installation, testing and commissioning of below mentioned capacity Cassette indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. i 4 Way Cassette Unit - 4.50 TR

HVAC-6 2 Indoor Units 2.1 Supplying, installation, testing and commissioning of below mentioned capacity Cassette indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. ii 1 Way Cassette Unit - 1 TR

HVAC-7 2 Indoor Units 2.1 Supplying, installation, testing and commissioning of below mentioned capacity Cassette indoor unit of air conditioners complete with fan and fan motor, controls, drain Pump etc. as per specifications and drawings. iii 1 Way Cassette Unit - 2 TR

HVAC-82.2 Supplying, installation, testing and commissioning of below mentioned capacity DUCTABLE TYPE indoor unit of air conditioners complete with fan and fan motor, controls, etc. as per specifications and drawings. i 8 TR- HIGH STATIC DUCTABLE

HVAC-9 2.2 Supplying, installation, testing and commissioning of below mentioned capacity DUCTABLE TYPE indoor unit of air conditioners complete with fan and fan motor, controls, etc. as per specifications and drawings. ii 4 TR- HIGH STATIC DUCTABLE

HVAC-12 2.4 Supply, installation, testing and commissioning Air Handling Unit Kit EEV and Commnication Kit.

3.0 Supplying, Installation, Testing and commissioning of Imported fittings (Ref Net) Y-joints etc as per specifications as required complete in all respects.

HVAC-15 4.0 Remotes ii Supplying, Installation, Testing and commissioning of Corded Remote reqd. to operate the indoor AHU units as per specification mentioned in the bidding document and as per standard guidelines etc. as required.

HVAC-16 5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow i 41.3 mm O.D.(insulation : 19 mm)

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow ii 34.9 mm O.D.(insulation : 19 mm)

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow iii 28.6 mm O.D.(insulation : 19 mm)

HVAC-19 Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow iv 22.2 mm O.D.(insulation : 13 mm)

Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow v 19.1 mm O.D.(insulation : 13 mm)

HVAC-14 4.0 Remotes i Supplying, Installation, Testing and commissioning of Cordless Remote reqd. to operate the indoor hi-wall/CASSETTTE units as per specification mentioned in the bidding document and as per standard guidelines etc. as required.

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow vi 15.9 mm O.D.(insulation : 13 mm)

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow vii 12.7 mm O.D.(insulation : 13 mm)

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow viii 9.5 mm O.D.(insulation : 13 mm)

5.0 Refrigerant Piping for VRV units. Supplying, and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRV/ VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes and layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRV/VRF system. Makes :- Mandev , Rajko, Hariom, Maxflow xi 6.3 mm O.D.(insulation : 13 mm)

6.0 Supplying, installation, testing and commissioning of following sizes of rigid PVC piping complete with elbow T-joint, socket duly supported as per specifications and insulated with 6mm thick closed cell nitrile rubber insulation. Makes Supreem, Finolex, Diplast i 25 mm Dia

7.0 Supplying and installation following size of perforated pre-painted M.S. cable trays with perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc. as required complete in all respects. i 150mm (wide) x 50mm(depth) x 1.6mm (thick)

7.0 Supplying and installation following size of perforated pre-painted M.S. cable trays with perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc. as required complete in all respects. ii 300mm (wide) x 50mm(depth) x 1.6mm (thick)

8 GSS Ducting (Factory fabricated): Supply, installation and testing of factory fabricated 120 GSM sheet metal ducts of following thicknesses including Wire Rope Hangers and Supports complete with end fixing, flexible connections in ducting, nut bolts, gasket, splitter dampers and vanes etc. complete as per specification in accordance with the approved shop drawings and required by the specifications.The ducting shall be provided as per SMACNA standard. i 24 gauge galvanised sheet

8 GSS Ducting (Factory fabricated): Supply, installation and testing of factory fabricated 120 GSM sheet metal ducts of following thicknesses including Wire Rope Hangers and Supports complete with end fixing, flexible connections in ducting, nut bolts, gasket, splitter dampers and vanes etc. complete as per specification in accordance with the approved shop drawings and required by the specifications.The ducting shall be provided as per SMACNA standard. ii 22 gauge galvanised sheet

8 GSS Ducting (Factory fabricated): Supply, installation and testing of factory fabricated 120 GSM sheet metal ducts of following thicknesses including Wire Rope Hangers and Supports complete with end fixing, flexible connections in ducting, nut bolts, gasket, splitter dampers and vanes etc. complete as per specification in accordance with the approved shop drawings and required by the specifications.The ducting shall be provided as per SMACNA standard. iii 20 gauge galvanised sheet

9 Acoustic Lining of Ducts: Supplying, installing and testing of acoustic lining within supply and return air ducts as per the specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining of open cell nitrile rubber insulation with density 140-160 Kg/ cum as per the specifications.

10 Thermal Insulation: Supply, Installing, testing and commissioning of duct thermal insulation, Nitrile rubber insulation with aluminium foil faced, class `O` on ducts complete as per technical specifications with all the necessary mounting accessories as required for complete installation. 13 mm thick

11 Volume Control Damper: Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.The thickness of damper frame shall be 16 Gauge and damper blade shall be 18 Gauge

12 Flexible Connection: Supplying, fabricating, installing and testing of 150mm long silicon based flexible connection constructed of fire resistant material. The silicon shall have backing of glass fibre. Quantity is mentioned considering perimeter length.

13 Air Grilles: 13.1 Supplying, installing, testing and balancing of powder coated extruded aluminium grilles of various sizes. Each grill shall be with fixed horizontal front bar, air distribution grid for straightening the air flow through the collar and register complete as per specification and drawings.( WITH DAMPER)

13.2 Supplying, installing, testing and balancing of powder coated extruded aluminium grilles of various sizes. Each grill shall be with fixed horizontal front bar, air distribution grid for straightening the air flow through the collar and register complete as per specification and drawings.( WITHOUT DAMPER)

Providing and fixing 150 watt LED flood light make(HALONIX,PHILIPS,SURYA,HAVELLS)

Supply and fixing of 40 watt Ceiling light of size 2` x 2` (MAKE- HAVELS,WIPRO,SYSKA,PHILIPS,ORIENT)

Supply and fixing of 12 watt DIMMABLE LED LIGHT (MAKE- HAVELS,WIPRO,SYSKA,PHILIPS,ORIENT)

A-1 FOH L plus R plus C- The KI-362 three-way trapezoidal array-capable (twelve built-in 3/8` 16-thread fly points) loudspeaker is a value-engineered compact Tractrix® Horn-loaded system capable of superior performance in permanent installation, Rms power 400 Watts@8 Ohms, Maximum SPL 126 dB, DISPERSION ANGLE 90° Horizontal X 60° Vertical. 12 suspension points for flexible mounting

A-2 Front hanging subwoofer - Professional subwoofer shall include a Dual 15` Sunwoofer, Power handling shall be 800 watts 3200 watts peak, Maximum continuous output at one meter shall be 136dB SPL. Nominal impedance shall be 8 ohms

A3 Hanging Arranngment and attachment for Above Subwoofer and Speakers

A4 Front fill speakers (under stage location) The KI-362 three-way trapezoidal array-capable (twelve built-in 3/8` 16-thread fly points) loudspeaker is a value-engineered compact Tractrix® Horn-loaded system capable of superior performance in permanent installation, Rms power 400 Watts@8 Ohms, Maximum SPL 126 dB, DISPERSION ANGLE 90° Horizontal X 60° Vertical.

A5 Front fill Subwoofer (under stage location) Professional subwoofer shall include a single 15`, Power handling shall be 400 watts, Maximum continuous output at one meter shall be 125dB SPL. Nominal impedance shall be 8 ohms

A6 Surround L plus R Compact two-way 12` Loudspeaker, Power Handling 300 watts 1200 watt peak, Maximum SPL3 127 dB

A7 Stage fold back monitor speaker -Compact two-way 12` Loudspeaker, Power Handling 300 watts 1200 watt peak, Maximum SPL3 127 dB

A8 wireless Microphone system

A9 wireless Microphone system

A-10 Active antenna splitter is built in a full metal housing

A-11 Passive omni-directional antenna

A12 Professional dynamic super cardioid vocal microphone

A13 Professional dynamic instrument microphone

A14 Stereo DI Boxes for electronic instruments

A15 Floor mount box for microphone connectivity (2 x XLR in)

A16 Floor mount box for microphone connectivity (2 x Line Out)

A17 Wall plate with 2 x RJ45 Port

A18 Floor mount box for Floor Monitor connectivity (1 x Speakon)

A19 Compact Digital Stageboxes with Remote Controlled I/O

A20 Powerful digital console, 24 (16 - Si Expression 1, 32 – Si Expression 3) mono mic inputs

B Auditorium Video and Control System B1 4K60 4:2:0 HDMIWall-Plate Transmitter

B2 4K60 4:2:0 HDMI Receiver

B3 4x1 plus 1 4K60 Presentation Switcher

B4 4K60 4:2:0 HDMI HDCP 2.2 Transmitter

B5 4K60 4:2:0 HDMI HDCP 2.2 Receiver

B6 Wireless Presentation and Collaboration Solution

B7 32` Display for AV Room with Fixed Mount

B8 1-chip DLP LASER Phosphor Multimedia Projection system having, 9500 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution,

B9 Lens

B10 Motorised Projection screen,354` diagonal size, 16:10 aspect ratio, Matte white fabric, Tab tensioned, with all mounting acessori

B11 2 Bidirectional RS–232 ports. 2 IR ports. 4 I/O ports. 1 Ethernet port.

B12 7-Inch Rack Mount PoE Touch Panel

B13 10 port ethernet switch with POE

B14 TPC-IPAD, TP CONTROL APP LICENSE FOR IPAD

B15 Apple IPAD with wifi

C Backend/AV Rack Hardware C1 Four-channel, 1250W @ 4/8? Analog Power Amplifier, 70V/100V

C2 Eight-channel, 600W @ 4/8? Analog Power Amplifier, 70V/100V

C3 Four-channel, 30W @ 4/8? Analog Power Amplifier, 70V/100V

C4 12x8 DSP

D1 Microphone Cable

D2 Speaker Cable -4sqmm

D3 Speaker Cable -2.5sqmm

D4 50 Ohms Co-axial Cable for antena

D5 Various Connectors and required Mounts/Patch Cords/Cables

D6 CAT6 Cables

D7 CAT6 Cables

D8 HDMI Cable

D9 Floor Standing Mic Stand

D10 Desk Standing Mic Stand

D11 36 U Equipment Rack

EDF-1 SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI and TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45°Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv and Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

EDF-2 SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI and TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

EDF-3 SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI and TLCI Value ) 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv and Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014

EDF-4 SITC of 100W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel LensCRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 110W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - plus 40° ~ -30° Active Cooling with Low Noise Fan DmX and RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

EDF-5 SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control and Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

EDF-6 SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W Sound Active Mode Control IP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product

EDF-8 `SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD`

EDF-9 SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip

EDF-10 `SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems.`

EDF-11 SITC of Fixed on stage Lighting bar/winch of 10Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures

EDF-12 SITC of Fixed stage side Ladder as per the design, Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud and Trolley, Pivoted or Fixed Suspenders as per site conditions

EDF-13 SITC of Fixed FOH Lighting bar/winch of 11Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures

EDF-14 SITC of Power Distribution Electrical panel having a Individual MCB control for 18 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits.Custom built as per specification and project requirement.

EDF-15 SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to plus 70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing

EDF-16 SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to plus 70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing

EDF-17 SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

EDF-18 SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

EDF-19 SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket and 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection and electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

EDF-20 SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares

EDF-22 SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections

EDF-21 SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

EDF-23 SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing

EDF-24 `SITC of Digital Lighting Console with 1024 DMX channels, 1024 Channels. 10 Programmable Executors Master Fader, Keypad entry, LCD Display, Encoder Wheels Time control of scenes: Fade in/out, LTP slope Channels for each fixture 40 primary plus 40 fine tune Switchable Page Scenes/Playbacks 10 Scenes to run simultaneoulsy 600 Scene step Shape generators: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus, Master slider - Global, playback, fixture USB Memory - FAT32 supported`

EDF-26 SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.

EDF-27 SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.

Stage Drapery EDF-28 `SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems.`

EDF-29 SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint

EDF-31 SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.

EDF-32 SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size.

EDF-33 SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.

EDF-34 SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:17Mtr x 7.5Mtr.

EDF-35 SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 15.5Mtr x 7.5Mtr.

EDF-36 `SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 11Mtr x 1Mtr. `

EDF-37 SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 17Mtr x 1.2Mtr.

EDF-38 SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 6.5Mtr x 1.5Mtr

EDF-39 SITC of On Stage Fixed Frill Bar 11 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

EDF-40 SITC of On Stage Fixed Valance Bar 17 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

EDF-41 SITC of Fixed Wing Structure designed as per site condition for a height approx 6.5 Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable.

EDF-42 `SITC of Motorized DMX operated Main Curtain 17 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated `

EDF-43 `SITC of Fixed Rear Curtain 15.5 Mtrs straight, Centre partting as per design. Made up of I Track for complete length Curtain holding trollies Providing ball bearing for smoother noiseless movement 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Suspension through Suspenders as per site conditions Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated `

1 `Supply and Installation of acoustical system Entire system to be developed over 2`*2 GI GRID base -(Acoustical Tiles)Non bendable and corrosion free 50 mm thick clamped with wall 610 mm spacing centre to centre Cavity to be layered with Infill : Acoustic blanket as lining synth disabling all instances of Echo and Resonance 1000 GSM:50mm 120 kg/m3 NRC :0.9 10 MM Green MDF :customised as base cover Perforated U pvc -12 mm tracks as per design with profiles Edge/Cove/Midrib and Fabric 54” W stretchable velvet /350 Grams/m2- Acoustic Polyfill below Fabric 25 mm 300 GSM Fabric as per client approved shades Stretachable Polyester : 54```

2 `Supply and Installation Ceiling 2*2 T Grid Section : Profile Network Hot dipped Galvanised Steel with Zinc coating 600 mm *600 mm Spacing Polyfill Acoustic Blanket :300 GSM : 50 MM Layered below the tiles Perforated gypsym Tiles 2*2 Layered at T section Termite Proof :non combustible 10-12 mm Thick Acoustical Board`

3 `Supply and Installation Floor Carpet Installed over Backed with underlay 6-10mm Cut pile :12 mm ::Woven polypropylene 3400 G/m2 Width - 4 mtrs `

Bidder Name

Amount

Sanjay Kumar, Contractor(GSTN-NA)--1060099

SKG INFRATECH PRIVATE LIMITED(GSTN-NA)--1079705

SKG INFRATECH PRIVATE LIMITED

Sanjay Kumar, Contractor