EYE1/8802/21-Div 40-Providing new LED street light fittings on existing KSEB posts and providing new posts with LED fittings at various locations under Div 40 in cochin Municipal corporation

Amount

Part I- Electrification (Materials used for the work shall be as per the List of materials approved by the CCTCE and attached as separate document)

od1695494/2021_2022 : Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)(Make Philips/Crompton/Surya)

od1695495/2021_2022 : Charges for fitting proposed Street light fitting on KSEB/Corporation post at suitable height using 2 sets belt type GI clamps of minimum size 25x5 mm fitted on 25/32 mm GI pipe of minimum length 1.2metre using suitable nut bolt etc (pipe clamped on post at 2 locations) and giving connection to the street light main using 1/1.4 mm , 2 core PVC insulated & PVC sheathed 650/1100 V grade aluminium conductor cable with single sheathed outer covering suitable for weather proof application conforming to IS standards.(including charges for conveyance of dismantled materials and connected items to store of corporation )

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.8 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.10 : Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

od1695496/2021_2022 : Steel reinforcement for R.C.C work including straightening,cutting,bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more(Data 5.22.6 from civil work)

od1695497/2021_2022 : <br>Plastering surface of concrete with 6 mm thick cement plaster of mix:1:3 ( 1 cement : 3 fine sand) Data 13.16.1 of civil work

90.15.3.9 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 9 Meters

90.15.3.10 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 9 Meters

od1695498/2021_2022 : Supply and providing 300x300x170 mm or nearest size thermoplastic out door junction box suitable for mounting fuse unit/ MCB etc on suitably clamped on tubuler post (SINTEX or equivelent make)

od1695499/2021_2022 : Supply and providing 1 Nos 32 A HRC fuse base with fuse link and 32 A neutral link on existing meter box

od1742193/2022_2023 : Supply and providing HENSEL make cable junction box Cat No.KF 5250 with out terminals (200x150x98mm) IP 66 for out door installation with knock out for cable entry and exit and with additional DIN bar for mounting proposed MCB Supply and providing heavy guage additional connection link on existing pillar box for loop in and loop out of cable etc on existing GI Post using suitable bracket clamped /welded to the GI post.

od1695501/2021_2022 : Supply of pole support/suspension clamps with brackets suitable for LT ABcable on poles

od1695502/2021_2022 : Supply of dead end clamps suitable for LT AB cable on poles

od1695503/2021_2022 : Supply and laying Areal bunched cable 25 sq mm (ABC)LT,( 3 core +neutral) conforming to IS Standards from KSEB post to street light mounted post using proposed accesaries .

od1695505/2021_2022 : Earthing with G.I. earth pipe 1 metre long 40 mm dia (medium class) including providing 12 mm dia drilled holes minimum 20 nos along the entire length in alternate arrangement providing test joint using 2 nos ,25x3mm GI Strip minimum size 25 cm suitably shaped and tightly clamped to the pipe electrode using 25x6 mm steel bolts nut and washer and providing 2 nos, 6 mm dia drilled holes for clamping and bolting earth lead ,making masonry chamber with cover plate having locking arrangement and etc. ( charcoal and salt as required shall be filled at 30 cm dia around the earth electrode)

90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

90.16.4.1 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm GI strip

od1695506/2021_2022 : Amount to be paid by the contractor in KSEB as supervision charges(Actual amount will be reimbursed on production of original documents)

Part-II -Remuneration.(As per G.O.No.2878/2015/LSGD dated 22/9/2015 &G.O.(Rt)No.3277/2018/LSGD dated 31/12/2018). Not part of BOQ

AJITH

Bidder Name

CHANDRAMOHANAN

AJITH