Re-Conditioning, operation & Maintenance of Street Lights at Baikampady Industrial Area at Dakshinakannada District, Mangluru Zone

Re-Conditioning, operation & Maintenance of Street Lights at Baikampady Industrial Area at Dakshinakannada District, Mangluru Zone

Part-A: Repair & Reconditioning: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed s...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63 Amps. , complete with all lead and lift etc, as per specification and dire...

Supplying Heavy Duty Copper Terminal Long Barrels 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm, complete with all lead and lift etc, as per specification and direction of Engineer in charge. 2.5 mm2

Supplying and fixing microprocessor based electronic timer (without contactor, Din mounting using necessary bots, nuts, and washer etc.,) 3-120 Sec, complete with all lead and lift etc, as per speci...

Supplying and fixing 4 pole power contactor with NO/NC contracts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 rating and as per IS-13947. 40 Am...

Supplying and fixing miniature circuit breakers/Isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit b...

Fabricating, supplying and erection of 8 Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includ...

Supplying and fixing hot dip galvanized M.S. bracket suitable for outdoor luminaries and mounted on octogonal pole using necessary bolts, nuts etc.,. Complete. Single arm bracket with 1500mm standard ...

Supply of LED Streetlight luminaries with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyc...

Fixing Halogen/metal hallide/SVL/IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires, complete with all lead and lift etc, ...

Fabricating supplying and mounting MS box made out 18 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and fixing angle frame work fabricated out of M.S. Angle iron and M.S. flat with bolts, washers ec., and painted with 2 coats of red oxide and then 2 coats of approve paint.

Supplying Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Fixing Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm , complete with all lead and lift etc, as per specification and direction of Engineer in charge.

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws., complete with all lead and ...

Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeves, mounted on phenolic /FRP/DMC insulator wh...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cut out sand other equipment son the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit. The pit should b...

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

complete with all lead and lift etc, as per specification and di...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5 ...

Supply & installation of CCMS-10KVA, Rated Input voltage, 240 Volts & 415V AC, 50Hz, KVA Rating upto 10KVA, Current rating - 12A/24A/32A (Single & Three phase), connection single three phase-2 wire /4...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Dismantling of of exsting old corrogated/ scrap Streetlights pole of height 9 mtr, complete with all lead and lift etc, as per specification and direction of Engineer in charge.

PART-B Maintenance Work: Operation and annual maintainance of LED street lights system including replacement of damaged/failed/fused out components like LED drivers. LED array, MCPCB, surge protective...

Operation and maintainance of LED street lights system including replacement of damaged/failed/fused out components like LED drivers. LED array, MCPCB, surge protective device wires and switching ON/O...