Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
16 Jun 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Mech. Irrig. Div. Baramulla
Mech. Irrig. Div. Baramulla
Mechanical works at LI/dewatering scheme Magraypora 2nd of MISD Pattan
2022_IFC_173210_4
eNIT 21 of 2022-23
Open Tender
Repair and Maintenance Works
Item Rate
7 days
Pattan
Please refer Tender documents.
5 documents required · 5 mandatory
₹50
Yes
Executive Engineer Mech. Irrig. Div. Baramulla
Yes
20 Jun 2022
9 Jun 2022
17 Jun 2022
9 Jun 2022
16 Jun 2022
9 Jun 2022
120 days
Amount
Repairs to the 05 cusec pumping unit at site by way of: a. Providing of new bearing 6408 of ZKL/ARB/NBC make.
b. Replacement of Driving End (DE) bearing of horizontal pump by way of: Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc. and fitting of new bearing in its place with greasing of the bearing. The Job excludes the cost of bearing.
c. Replacement of Non-Driving End (NDE) bearing of horizontal pump by way of: Opening the end cover of NDE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place.
Supply, installation, testing and commissioning of 200mm dia, 4.5 mm thick, ERW MS pipe for extension of suction side of pumping unit. The job should be carried out by means of cutting using oxy acetylene gas and welding as per requirement. The job also includes earth work excavation to fit the pipe as per site requirement. The Job also includes applying of two coats of red oxide paint after cleaning the surfaces and applying two coats of enamel paint of specified shade.
Providing and fitting of 200mm nominal dia MS flanges for fabrication of flanged pipe ends. The flanges shall be as per IS specified and 12mm thick. The flanges shall be fitted on the pipes using superior class welding electrodes and leak proof welding. The Job is to be carried out by highly skilled technician .Job includes all tools and tackles required for completion of the Job.
Fabrication, providing and fitting of 200mm dia 90 degree MS flanged long bends as per site requirement to be fitted on suction side of the pumping unit, fabricated out of 5 mm thick ERW MS pipe by means of cutting, arc welding using sandeep/ Adani welding electrodes. Job includes providing and fitting of 250mm dia and 12mm thick MS flanges to both ends of the bend by means of arc welding as per actual site requirement. Cost includes charges of all tools and tackles required for completion of the Job.
Fabrication, providing and fitting of MS angle iron, MS strips and MS sheets for securing the opening of pump shed wall of suction side with following specifications and as per drawing which is attached with the estimate Total length of ISA 35x35x5 = 5.5 mtr Total length of ISA 35x35x5 = 14.5 kg Total area of rectangular sheets (2mm thickness) = 1.3 sqmtr. Total weight of rectangular sheets (2mm thickness) = 20 kgs. Total length of 25x25x3mm rectangular strip = 7.5 mtr Total weight of 25x25x3mm rectangular strip = 8.5 kg Total length of 35x3mm rectangular strip = 5.5 mtr Total weight of 35x3mm rectangular strip = 8.5kg Total approximate weight of latches and hinges = 2 kgs. Total weight = (14.5+20+8.5+8.5+2) kgs = 53.5 kg. job also includes preparing of surface of MS window using blue lamp and metallic sand paper and then applying of two coats of red oxide anti corrosive primer followed by two coats of enamel paint of reputed make. Shade of paint to be specified by the site engineer. Note: The MS windows should be made as per the actual site conditions and the contractor has to take the measurements before taking up the Job
Preparing of surface of pumping unit using blue lamp and metallic sand paper and then applying of two coats of red oxide anti corrosive primer followed by two coats of enamel paint of reputed make. Shade of paint to be specified by the site engineer.
M/s Sopore Engineering Works
MEER ENGINEERS INDUSTRIAL ESTATE SOPORE
M/s SAJID ENGINEERING WORKS
Asif Engineering Works
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .