Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAccepted-AOC VANIYAPURACKAI HOUSE PURAKKAD PO ALAPPUZHA | ALAPPUZHA | ALAPPUZHA | KERALA | ₹3.3 L | L1 | Accepted-AOC Being first lowest |
| 2 | L2₹3.3 L+₹4,869 (1.48%)Rejected-AOC PLAVILA PUTHEN VEEDU MULAVANA P O KOLLAM PIN 691503 | KOLLAM | KOLLAM | KERALA | 691503 | ₹3.3 L+₹4,869 (1.48%) | L2 | Rejected-AOC Being second lowest |
| 3 | L3₹3.6 L+₹26,649 (8.09%)Rejected-AOC DEVIKA S N PURAM P O CHERTHALA ALLEPPEY KERALA PIN 688582 | CHERTHALA | ALAPPUZHA | KERALA | 688582 | ₹3.6 L+₹26,649 (8.09%) | L3 | Rejected-AOC Being third lowest |
| Sl No | Description | Qty | Unit | Shaji.V L1 | SIVADAS KR L3 | P G BUILDING SOLUTIONS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. | 1 | sqm | 3 ₹3 | 3.2 ₹3.2 | 2 ₹2 Lowest |
| 2.00 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 1 | cum | 1,784.8 ₹1,784.8 Lowest | 1,912.5 ₹1,912.5 | 2,000 ₹2,000 |
| 3.00 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 2 | sqm | 309.8 ₹619.6 Lowest | 332 ₹664 | 320 ₹640 |
| 4.00 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering,shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.5 | cum | 10,703 ₹5,351.5 Lowest | 11,469.4 ₹5,734.7 | 11,000 ₹5,500 |
| 5.00 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 5 | sqm | 639.2 ₹3,196 | 685 ₹3,425 | 600 ₹3,000 Lowest |
| 6.00 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) of minimum 2mm thickness including cutting, hoisting, fixing position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as as per Engineer in charge | 1,060 | kg | 160 ₹1,69,600 | 174.4 ₹1,84,864 | 150 ₹1,59,000 Lowest |
| 7.00 | Providing and fixing steel wedge anchor bolt of embedment length 75 mm for fixing base plate/channels to RCC slabs, beams ,walls,columns including drilling holes,tools and tackles, Scaffolding etc. complete as per Engineer in charge | 32 | nos | 158.7 ₹5,078.4 | 170 ₹5,440 | 130 ₹4,160 Lowest |
| 8.00 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, after preparing the surface by using wirebrush or emery paper, all works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as per directions of Engineer in Charge On steel work. | 90 | sqm | 212 ₹19,080 Lowest | 227 ₹20,430 | 240 ₹21,600 |
| 9.00 | Providing and fixing Galvalume sheets ( Supply of Pre painted Alu- Zinc alloy coated steel sheets -55% Aluminium, 43% Zinc, 1.6% Silicons,0.5mm thick-PPGL). Sheet should be supplied in single length upto 12 metre or as desired by Engineer in charge.The sheet shall be fixed using self drilling screws with corrosion resistant (SDS of brand Patta) of size (5.5 x 55mm) with EPDM seal at top of corrugation complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 200mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and providing ridges including cutting to size and shape wherever required as per direction of engineer in charge, the ridge will be paid separately. cost and conveyance of material to site and necessary scaffoldings which required.The contractor shall submit the manufacturers test certificates of the roofing sheet before commencing the work and also required to conduct the test on the randomly selected sample from the site by the Engineer-in -Charge to ensure the minimum thickness. | 137 | sqm | 705.7 ₹96,680.9 Lowest | 756 ₹1,03,572 | 795 ₹1,08,915 |
| 10.00 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridge in the form of sheet coil should be used as the direction of Engineer-in-charge and a minimum length of 40 cm overlap should be provided. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required:Ridges plain (600 mm) | 14 | meter | 473.5 ₹6,629 Lowest | 507.4 ₹7,103.6 | 500 ₹7,000 |
Tender Value
₹4.0 L
EMD Value
₹9,950
Closing Date
27 Jan 2026, 4:00 pmClosed
The Managing Director
Kerala State Warehousing Corporation, Warehousing Corporation Road, PB No. 1727, Kochi-16
Providing Light roofing over office building at State Warehouse Cherthala in Alappuzha District.
2026_KSWC_827929_1
KSWC/Constn/RM/Chrthla/2025-26
Open Tender
Civil Works - Others
Item Rate
60 days
State Warehouse Near K.S.E.B Power House Cherthala
Please refer tender documents
9 documents required · 9 mandatory
₹944
₹9,950
23 Apr 2026
19 Jan 2026
29 Jan 2026
19 Jan 2026
27 Jan 2026
20 Jan 2026
20 Jan 2026 - 27 Jan 2026
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering,shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) of minimum 2mm thickness including cutting, hoisting, fixing position and applying a priming coat of approved steel primer after preparing the surface by using wirebrush or emery paper, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as as per Engineer in charge
Providing and fixing steel wedge anchor bolt of embedment length 75 mm for fixing base plate/channels to RCC slabs, beams ,walls,columns including drilling holes,tools and tackles, Scaffolding etc. complete as per Engineer in charge
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, after preparing the surface by using wirebrush or emery paper, all works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as per directions of Engineer in Charge On steel work.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridge in the form of sheet coil should be used as the direction of Engineer-in-charge and a minimum length of 40 cm overlap should be provided. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required:Ridges plain (600 mm)
Providing and fixing 200mm (or nearest greater available size) PVC half split square type eave gutter including cost of all necessary fittings cost and conveyance of all materials and labour charges etc complete as per direction of Engineer in Charge
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Contletrfrtaxes.pdf
Tender Documents • 0.06 MB
ExperienceFormat.pdf
Tender Documents • 0.08 MB
Standardbiddocument.pdf
Tender Documents • 2.93 MB
BOQ_1389638.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .