Remaining False Ceiling and Other Work in Seventh Floor at Court Complex Building at Jodhpur Metropolitan, Jodhpur

P&F of false ceiling at a height decided by the engineer in charge on a MS made skelton frame work. The perimeter square MS pipe shall be fixed along with the wall, having dismension of 25mm and with a wall thickness of 1mm+/- 0.3mm. The main member of the grid is made out of MS pipe having on a overall thickness 38x25mm and with a wall thickness of 1mm +/- 0.3mm. The side pipe and the intermediate pipes is fixed to the roof from the top with the help of ceiling angels / pipes.After the grid work is complete, it has to be covered by the multi-chamber hollow PVC section from below, with the help of self tapping screw of 19mm x 8mm. These PVC hollow section are having an overall dimension of 150mm x10mm or 254mm x 6mm, with a wall thickness of 1.0m + 0.3mm and 0.8 + 0.2mm respectively approved by the engineer in chareg, are jointed with each other by lap joint, which will conceal the screws. Necessary cutouts for electric connections, lighting, air conditioning etc. shall be provided at reqd. palace. The edge and cornice shall be covered by extruded PVC corner beading section of size 13mm x10mm with a wall thickness of 1.7mm+ 0.3mm. The same has to be fixed by applying cynoacrylate adhesive.

Providing and Fixing at all height all false ceiling of 12.5 mm thick tapered edge Gypsum board conforming to IS : 2095 including providing and fixing of frame work made of special section power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS : 277 and consisting of angle cleats of thick 25 mm wide x 16 mm thick with flanges of 22 mm and 37 mm at 1200 mm center to center one flange fixed to the ceiling with dash fastner 12.5 mm dia x 40 mm long with 6 mm dia bolts to the hangers of 25x25x5mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm center to center to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition withthe help of rawl plugs at 450 mm center to center with 25 mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of gypsum board with recommended filler paper tapes, finisher and two coats of primer suitable for gypsum board as per manufactures specifications and also including the cost of making openings for right fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer-in-charge but the excluding the cost of painting.

Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work.

Please Enable Macros to View BoQ information

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Providing & fixing 12 mm thick Bevelled edge Micro looking Glass Fibre Reinforced Gypsum False ceiling tiles (Diamond or equivalent) of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections GRID.The tile shall be laid on Silhouette profile grid system with 15 mm white/black flanges incorporating a 6 mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/Sqm minimum pull out strength of 100 kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & "birdsmouth" notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per sqm and need to be installed with suspension system of make. The Tile & Grid system used together should carry a 30 year warranty. INSTALLATION :- To comprise main runner spaced at 1200 mm centres securely fixed to the structural soffit using suspension system (Specifications below) at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer 600 mm module to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450 mm maximum centers. SUSPENSION SYSTEM consisting of galvanised M6 dash,8mm outer dia Anchor Fasteners 50mm long with Vertical Hangers rod of galvanised MS 6mm dia fully threaded upto 1000mm long and made of Galvanised MS L-type level adjuster of size 85x25x25x2mm with a minimum pull strength of 110 kg. All complete at all heights as per specifications, drawings and as directed by Engineer-in-Charge.