WBPWD/EE/BED/e-NIQ-34/2024-25

Amount

SITC of Automatic MRL Lift (as per manufacturer design & as per detailed specification below Conforming to IS) and putting it into operation after final testing in the existing lift shaft, complete with all accessories and repairing the damaged wall/floor etc. if any as required. Make: OTIS/KONE/SCHINDLER Type: Passenger Lift without machine room. Load: 15 - Passenger/1020 Kg. Control: Microprocessor based with AC variable voltage & variable frequency (VVVF) Machine:- Energy efficient machine, Gearless without Machine Room. Speed:- 01 Mtrs./Sec Floor Served:- Ground floor to 4th floor. (5 stops) Landing:- 05 (five) All on same side Travel: 13.2 Mtr approx. (Bidder should visit the site) As per CGA drawing. Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator. Signals: Digital car position indicator, car travels direction indicator in car & at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button: All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendant mode of operation. Display type: Colour, LCD/LED, Segmented/Scroll, LCD/LED. Operation Push Button for lift maintenance & service should be on top of the car. Levelling accuracy ± 5 mm (Micro levelling arrangement)

CAR Car inside: 1000 mm (W) x 2400 mm (D) x 2200mm (H) or as per manufacturer’s standard conforming to IS. Car Entrance: Clear Opening (minimum) 800 mm (W) x 2000 mm (H) protected with car door. Car Enclosure: Stainless Steel Sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan. Car Ventilation: Axial fan with anodised aluminium/SS grill. Car Flooring: Decorative granite flooring (As per direction of EIC and according to this Department's Order). Car Door: Stainless Steel Centre opening (COPD)/ Telescopic opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 minute. Landing Door: Stainless Steel Centre opening (COPD)/ Telescopic opening (TSPD) automatic door synchronising with car door with fire rating of 120 minute. Door safety: Full length Photocell assembly light curtain sensor.

PROTECTTVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure/single phasing/others. Overload Protection: Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication. Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room. Emergency Alarm: Battery operated alarm bell system in lift car and control room. Fireman switch: Fireman switch placed at ground floor. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift. Main Wire Rope/Belt: As per manufacture’s standard conforming to IS.

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension: 1800 mm (Width) X 2700 (Depth) mm (bidder should visit the site) Pit Depth: 1650 mm (Bidder should visit the site) Overhead: 4800 mm (Bidder should visit the site) Electric power supply: AC 415 Volt 3 phase, 50 Hz, terminated in machine room as per IS. Note: 1. Rate considering Minor civil works, wall / floor cutting, for making holes, chiseling etc. and mending good the damages to the original finish. Note: 2. Necessary MS member e.g., angle iron, MS channel, brackets etc. as required to be provided by the manufacturer.

SCHINDLER INDIA PRIVATE LIMITED (BID ID -5666178)