Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79,547.04Accepted-AOC | ₹79,547.04 | L1 | Accepted-AOC FIRST LOWEST |
| 2 | l2₹84,622.01+₹5,074.97 (6.38%)Rejected-Finance VONIYERI H CHIRAKKODE | KOZHIKODE | KOZHIKODE | KERALA | ₹84,622.01+₹5,074.97 (6.38%) | l2 | Rejected-Finance SECOND LOWEST |
| 3 | L3₹85,032.01+₹5,484.97 (6.90%)Rejected-Finance | ₹85,032.01+₹5,484.97 (6.90%) | L3 | Rejected-Finance THIRD LOWEST |
| Sl No | Description | Qty | Unit | prajeesh L2 | Chandran M L3 | AJITH M V L1 |
|---|---|---|---|---|---|---|
| 1.00maintenance | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.14 | cum | 335.74 ₹45.32 | 340 ₹45.9 | 315.6 ₹42.61 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.14 | cum | 8,620.24 ₹1,163.73 | 8,625 ₹1,164.38 | 8,103.03 ₹1,093.91 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 211.2 | kg | 174.58 ₹36,871.3 | 175 ₹36,960 | 164.11 ₹34,660.03 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 43.19 | sqm | 786 ₹33,944.2 | 790 ₹34,116.94 | 738.84 ₹31,907.54 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 15.91 | sqm | 153.87 ₹2,447.61 | 155 ₹2,465.59 | 144.64 ₹2,300.79 Lowest |
| 1.01 | OD375684/2025-2026:Providing and fixing 150mm split pipe (square type) over flat iron brackets 20x5mm size | 16.8 | metre | 393.53 ₹6,611.3 | 400 ₹6,720 | 369.92 ₹6,214.66 Lowest |
| 1.01 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 6.6 | metre | 253.48 ₹1,672.97 | 255 ₹1,683 | 238.27 ₹1,572.58 Lowest |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 3.54 | metre | 527 ₹1,865.58 | 530 ₹1,876.2 | 495.74 ₹1,754.92 Lowest |
Tender Value
₹84,623
EMD Value
₹2,116
Closing Date
11 Feb 2026, 12:00 pmClosed
ASSISTSNT ENGINEER
Office of assistant engineer,Ramanthali gp
REPAIR WORKS TO RAMANTHALI AYURVED SUB CENTRE IN RAMANTHALI GP-RGP 104/25-26
2026_LSGD_833128_5
ET6/2025-26
Open Tender
Civil Works - Buildings
Item Rate
Office of assistant engineer, Ramanthali gp
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹2,116
Yes
28 Apr 2026
4 Feb 2026
12 Feb 2026
4 Feb 2026
11 Feb 2026
4 Feb 2026
maintenance
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD375684/2025-2026:Providing and fixing 150mm split pipe (square type) over flat iron brackets 20x5mm size
50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1401049.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.20 MB
prili.pdf
Tender Documents • 0.26 MB
epay.pdf
Tender Documents • 0.24 MB
ipact.pdf
Tender Documents • 0.24 MB
affi.pdf
Tender Documents • 0.24 MB
fot.pdf
Tender Documents • 0.25 MB
sbd.pdf
Tender Documents • 0.98 MB
BOQ_1401049.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .