SPECIAL REPAIR TO BLDG NO P-20 (OR LIVING LINE ) OF 944 TPT COY ASC TYPE C AT AHMEDABAD CANTT

Amount

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking out old mosquito steel window shutter only from existing steel frame by cutting out hinges and making good damaged portion.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) and refixing in same opening n.exc 1.5 sqm each

Taking down chowkats or frame with shutters (without taking off shutters from the frame) and refixing in same opening exc 1.5 sqm and n exc 4.0 sqm each.

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete withwithout glazing bars dove-tailed or welded complete including one coat of shop coat of primer.

S&F mild steel angle iron work as in doors frames, conforming to Fe-410-0 and complete.

S&F Pressed steel frames Size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed

M&L for providing PCC 1:2:4 type B-O using 12.5mm graded stone aggregate as in filling pressed steel frame

S&F mild steel 150mm (short type) ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S&F 2nd hard wood factory made 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated.

S&F butt hinges 100mm size medium weight cold rolled mild steel complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

M&L Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M & L for machine cut kota stone slab size as in flooring, stair case landing. treads of steps etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified nd directed

M&L for grinding and mirror polishing on eisting kota stone flooring

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.(Note : Corrugation colour and shape of sheet shall be approved by GE)

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.

S&F mild rolled steel straps in joist, angle ,channel as in purlins, rafters, vertical post etc conforming to fe410 w all as directed by Engr-in-Charge complete all as specified and directed.

Supply & fix aluminium powder coated framed with shutter, three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M&L for grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminum frame of size 37x19x2mm and all as secified.

S&F anodised aluminum windows/Ventilators framed with shutter side hung or fixed of medium grade sections weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber gasket, aluminium snap beading, screws, aluminium frame and fittings including 5 mm thick tinted sheet glass and including locking arrangements and all fittings all as per manufacturers instructions and all as specified.

Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement with and including water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and directed. Note :- Supply only water proofing compound shall be measured and paid separately. complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Supply & fix mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends binding with and including mild steel wire annealed not less than 0.9mm dia all a specified and directed

M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,chajja , overhangs etc. also splays between floors and beams, etc.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.

S&F aluminium anodised door Single/double shutter with frame size 63 x 38 x 2 mm and 44 x 44 x 2 mm for all other members and 100 x 44 x 2 mm for bottom and middle rail, channel tracks including gasket aluminium cleat 6 mm dia rounded bars, 5 mm thick tinted glass panes top and prelaminated particle board bottoms including aluminium handle hinges and locking arrangement, etc complete all as per specified.

S&F aluminium (Die cast) body closer ISI marked hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 10000mm in width & of weight between 61 to 80 Kg fixed in repairs

S&F double action floor spring ISI marked hydrauilically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other plate made of steel heavy duty fixed in repairs.

M&L for cement concrete 1:2:4 type B1 (12.5mm graded aggregate) 25mm thick type Bo finished rough for laying floor tiling

M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6

All as per item No 67 above but on verticle surfaces incl 10 mm thick screed bed CM 1:4

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed. ( Make:- METROC or METACIL or any other equivalent make as approved by GE.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer all as specifed.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls all as specified and directed by the Engr-in-Charge

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L Preparation of old surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L for preparation of New surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying Two coat of synthetic enamel paint, incl one coat Primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats cement based paint on over one coat of Primer on walls all as specified and directed by the Engr-in-Charge

M&L complete removal of existing treatement and applying two coats of oil bound distemper and a coat of primer, old plastered or un-plastered surfaces on walls complere all as specified and directed by Engr-in-Charge

M & L applying 2 mm thick wall care putty on wall.

Taking down carefully surface aluminium/copper point wiring with PVC casing-capping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.20 mm and white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc. complete for the following :-

One light point controlled by one switch.

One fan / exhaust point controlled by one switch.

One socket outlet 6 amp controlled by one switch on independent board.

One socket outlet 6 amp controlled by one switch on same board with other switches.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3mm thick phenolic laminated white shite cover for one 16 amp socket outlet controlled by one switch on independent board.

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 6 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 16 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F ceiling rose 6 map, 3 plates polycarbonate body complete. Make – Havells Reo / Anchor Penta PC / SSk as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded coper conductor cable (Phase –Red, Neutral – Black, Earth-Green) drawing into and incl concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x6 sqmm + 1x6 sqmm earth wire complete

S&F LED batten (1.2m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumes at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt incl driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make- Philips cat ref no. ENDURALED BATTEN “BN 108C led 20s PSU CDL WH” or equivalent in wipro or GE lighting as approved.

S&F LED fixture 8 watt including connection all as per philips LED LINEA cat ref No.BN 550 WLED 6 -6500 or equivelent in Wipro or Havells as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminium housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Havells as approved.

S&F MCB dustribution board SPN.240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, eath bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S & F MCCB foru pole, 125 amps, 16 KA . Thermally adjustable between 70 to 80% including 4 spreader link set of same make as that of MCCB for connection required lugs etc complete. Make legrand cat ref No 420016 or equivalent in Schneider or Hager as approved.

S&F S&F MCBs as per load requirement ‘A’series of breaking capacity 10 KA, ISI marked incl required wiring connection with copper lugs of suitable size provided in MCB DBs of following ratings:

a) Single pole 6 to 16 amp.

(b) Double pole 32 amp.

(c) Four pole 63 amp.

S&F MCB distribution boardETPN, 415 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Dismantling of ceiling fans 1200/14000 mm sweep of any make, cleaning throughly, servicing of fan motor and parts fitted there in, oiling, reasing to bush/baerings replacment of unserviceble parts where required re-assembiling, testing handing at site as directed.

S&F of tube medium grade 40mm bore galvanised with all fittings and fixed complete wall to wall and ceilings or laid in floors complete all as directed : Make : Jindal/Tata/Surya.

Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

nirman construction

VIJAY CONSTRUCTION CO