IISER-K/IWD/Elect/LT cable/21-22/26

Amount

Laying of one number 1.1 KV grade , XLPE insulated insulated and PVC sheathed Armoured power cable of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Bidder should note that the quoted rates must be inclusive of cutting ,cleaning and removal of unwanted grarss bushes,creepers small plants/trees,through out the running length area during respective cable laying,as per the requirement and as per the direction of the Engineer In-Charge. The bidder should note that if any depth realted practical problem raises during exavation work for cable laying , that portion of cable will be covered by HDPE pipe Any Kind of tools,tackles,materials,labour,cartge etc,involvement required is under scope of the bidder and no additional payment will be made for that

3½C X 240 sq. mm

3½C X 120 sq. mm

3½C X 50 sq. mm

Laying of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing cable tray/surface with clamping arrangement as required.Bidders should note that during laying of that perticular cable ,after completion of cable laying at the existing cable tray/surface,if laying of cable through present existing concrete cable trench is not fissable as to keep the rest of the existing services uninterrupted ,this laying of this cable length will be conducted by the bidder on surface, with proper clamping arrangement and with the drilling work for inserting the cable upto the cable tray ,after taking prior approval from Engineer In-charge,

3½C X 240 sq. mm

3½C X 120 sq. mm

3½C X 50 sq. mm

Horizontal Installation (Moling) of Pipe below Road for road crossing of Cable Bidders should note that during moling work for laying of cable ,if any other services like pipe line of Chiller,water pipe,HT/LT cable get dammage due to this moling work,same will be repaired/changed by the bidder. The moling work will be conducted after taking prior approval from Engineer In-charge. Bidder should note that the quotated rates for Moling work must be inclusive of cutting of horizotal trench in the both side of road for smooth crossing of pipe below the road and refilling of that cutting /damaged( inclusive cutting at the both adjacent side of road) area of the road with proper dressing will be totally under Bidder's scope without any additional price involvement Horizontal Installation of 100 mm GI pipe as per BS1387 below the road at depth of 700 mm to 900 mm as per soil condition. Road width – 15 feet. Make :-Tata/Jindal/Shyam steel

Providing and laying cement concrete of Grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) for Backfilling of existing roads excavation complete with leveling, finishing etc. Cement: Ultratek, Birla, ACC, Ambuja

Supply of following size 1.1 KV grade XLPE insulated insulated and PVC sheathed Armoured Aluminium power cable(A2XFY) of following technical Data sheet 1.1 kV (A.C) & 1.5 kV (D.C ) to Earth 3.5 cores AL conductor, XLPE insulated, galvanised steel strip / wire armoured Cables as per IS 7098 Part -1. Conductor : AL stranded compact shaped conductor as per Cl. 2, IS 8130. Insulation : Crosslinked polyethylene (XLPE) Phase Core Color : Red, yellow, blue Neutral Core Color : Black Inner Sheath : PVC / PVC tape as per IS 7098 (P - 1) Armouring : Single armouring of galvanised steel strip / wire Outer Sheath : PVC Type ST - 2 as per IS 5831. ( FRLS Type) Cable Color : Black Bidder should note that sample of the cable should be approved prior to the delivery at site form the same drum and athe cables will be supplied along with Factory Routuinee & type test cerificates for that perticular drum Make: Finolex, Polycab, Havells,KEI

3.5CX240 sq mm

3.5CX120 sq mm

3.5CX50 sq mm

Supplying and making end termination with brass double compression gland for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Comet, Dowells,Connectwell

3½ CX 50 sq. mm

3½ CX 120 sq. mm

3½C X 240 sq. mm

Supplying and making aluminum Lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Comet, Dowells,Connectwell

Aluminium lugs for 50 sq. mm cable (Crimp/ring Type Long Barrel)

Aluminium lugs for 120 sq. mm cable (Crimp/ring Type Long Barrel)

Aluminium lugs for 240 sq. mm cable (Crimp/ring Type Long Barrel)

Aluminium lugs for 25 sq. mm cable (Crimp/ring Type Long Barrel)

Supplying & commissioning of Jointing Termination kit of following size of LT Cable with outdoor type Heat-shrinkable LT Cable straight through joint betwen same size of LT cable, termination kit with necessary hardware fittings complete as required. Make: Raychem, 3M, Multipressing

Straight through jointing kit for 3.5CX240 sq. mm Armoured Aluminium LT power cable

Straight through jointing kit for 3.5CX120 sq. mm Armoured Aluminium LT power cable

Straight through jointing kit for 3.5CX50 sq. mm Armoured Aluminium LT power cable

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. Make-Reputed

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Make-Reputed

Providing and fixing 6 SWG dia G.I. wire on surface or in ground for loop earthing as required.

Supply, installation testing and commissioning of Outdoor Double Door Kiosk type weather proof distribution feeder pillar box of sutable size with a tapered at top (for protection from rain water) and made out of not less than 2.0 mm thick for load bearing members & 1.6 mm thick for doors, compartmentalized,IP 65, epoxy powder coated treated in 7 tank process finish with following items, front and back both side openable, duly hinged doors with locking arrangement by providing both sides hold drafts and all hardware for fabrication of box. The cubical panel should be mounted with hardware on angle iron frame long legs duly primered and black painted. Frame be grouted with cement concrete 1:3:6 ratio and providing brick masonry along angle iron frame above ground level complete with connecting strips, Bakelite sheet, earth stud etc. cable entry from bottom suitable for 3.5Cx 240/120/70 Sq.mm I/c & O/g respectively. The panel should comprise of as per following (Panel shall be fabricated in CPRI approved panel builder with approval of the Deptt.. Drawing of the feeder pillar shall be submitted for approval prior to fabrication) Make: As per approval of Engineer-in-charge of IISER-K INCOMER 400 A ,4P,36 KA Change Over(C/O) Switch (Make:- Havells,L&T,C&S) - 1No. 400 A, 4P, 36 KA TM Release MCCB with rotary handle - 1 No. (Make: Havells, ABB, Siemens, L&T) 400 A, TPN Aluminum bus bar. OUTGOING (Make: Havells, ABB, Siemens, L&T) 250 A 4P 36 KA TM ReleaseMCCB rotary handle- 3 Nos. 100 A 4P 36 KA TM Release MCCB rotary handle- 1 Nos Digitol multifunction meter- I set LED- RYB indicator lamps- 1 set CT-400/5A, Class-1, 15 VA - 3nos Control circuit with 6 A MCB

M/S. KARTICK CHANDRA CHAKRABORTY

INTERNATIONAL COMMERCIAL CORPORATION

S.D.ENTERPRISE