08 /EE/PMD/PHED OF 2024-2025/Sl2

Amount

Supply and delivery at site of Radar type Level Transmitter for CWR Reliable measuring: for changing medias, pressure, temperatures, gas phases. Floodable sensor design: IP68/NEMA6P Approval: Non-hazardous area Power Supply; Output; Operation: 2-wire; 4-20mA; Bluetooth (App) configuration Antenna; Max. Measuring Range: 40mm/1-1/2''; 8m liquid -40...60°C/-40....1400F Process Connection Rear Side; Material: Thread G1 ISO228; PVDF Process Conneition Front Side; Material: Thread ISO228 G1-1/2; PVDF Cable Length: 10m/32ft The instrument will be supplied with wired Meter Protection Box, consisting of Over Voltage protection, 24V DC power supply and surge protection. [Make: Approved make of PHED]

Supply and delivery at site of Highly efficient IP65 LED Solar Lighting System with built-in high-efficiency Solar Panel, LED Light and long-life Lithium-ion with high-efficiency microprocessorbased charge controller and a motion sensor.Due to compact size, it's easy to mount on a pole top. The light has automatic dusk-to-dawn operation. Model Orient LSSN-40C90-42P, 40 Watt. (Mateials should be supplied after taking approval from department)

Supply & Delivery at site 7 mtr. Conical/ Cylindrical GRP street light pole made by CNC filament machine using Thermoset resin having minimum 65% glass containt in one piece with straight non decorative GRP single arm (arm size should as per manufacture drawing for installation of solar light) and internal junction box (6A SP MCB & 4 way connector). Top 85 ±2mm ID and bottom 176 ±2mm ID. (Mateials should be supplied after taking approval from department)

Construction of RCC foundation volume not less than 0.4 cum in portion 4:2:1 and Ø10 and Ø8 TOR including provision of cable entry in Pole junction box and neatly cemented finish (3mm thick) above ground level.

Erection of 7 mtr pole on RCC foundation.

Earthing with 1 no. of G.I. earth spike (20 mm dia x 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth one with separate 6 SWG G.I. Wires providing 15 mm dia G.I. pipe protection from earth spike feeder box/ junction box/ poles and fixing to the same by suitable nuts & bolts all commette as per direction of EIC.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire, No. 6 SWG

Fixing of Solar Street light fittings with suitable tie clamps & MS Plate for mounting on pole/tower and connecting necessary wires including hiring charges of ladder/scaffolding and other incidential charges.

Supply delivery at site 500 litre capacity, P.V.C. water storage tank of approved make with closed top with lid (Black) - Multilayer

Supply & delivery at site 15 mm dia PVC flexible pipe

Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipe fittings conforming to IS-15778: 2007 Tank connecting nipple a)32 mm dia (for drain pipe)

b)25 mm dia (for water inlet to tank)

c)20 mm dia (for pump suction line)

Supplying, fitting and fixing of 32 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 25 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 15 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only)

Supplying,fitting and fixing 25 mm dia check valve (horizontal) G.M. tested to 21 kg per sq. cm. 25 mm.

Supplying,fitting and fixing GM NRV (15 mm)

Supplying,fitting and fixing GM Ball Float valve (25 mm)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-I,SDR-11 a)25 mm dia (inlet from delivery line to tank)

b)15 mm dia (inlet from delivery line to tank)

c)32 mm dia (Drain line)

Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. With 1200 mm.dia. well.

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

S & F of 4 SWG GI (Hot Dip) wire on Parapet/Roof/Plinth/Surface of wall for lightning conductor as required (for Horizontal runs) with 40 mm long GI Staples spaced not exceeding 1300 mm apart incl. mending good all the damages to the building works.

S & F of 4 SWG GI (Hot Dip) wire on wall for the lightning conductor as required (for vertical run) with GI Staples (40 mm long) spaced not exceeding 1 Mtr. apart incl. mending good the damages to building works (excluding hire charges of scaffolding)

Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint.

Making soldered joints between conductors and down pipes/other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Installation, testing and commissioning of PLC panel for extension of exsisting MCC panel with cutting welding (where necy) painting and mending good damages including drawing of power cable and signal cable and connection complete with S & F all necy nut, bolt, washer, gland, lugs, etc. with programming for all equipment start stop for smooth water supply as per direction of EIC. including complete the earthing connection with earthing busbar.

Installation of Radar type Level Transmitter at CWR with making hole and fixing of suitable pvc pipe including supply and fixing of top cover of sensor and drawing of single cable under suitable conduit pipe, clamp, screw, nut, etc for protection and mending good damages to wall incl. painting etc.

Add GST @ 18%

Add CESS @ 1%

NUPUR CHANDRA HALDER (BID ID -5664179)

COMBINE ENTERPRISES (BID ID -5665691)