Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹7,500
Closing Date
25 Aug 2026, 3:00 pmDue tomorrow
U prakash - M(Civil)
Ph No - 9493792828
Repairs works to Security Watch Towers in Yard.
2026_HSL_99834_1
OS/CM/2035/25U dated 23 Jul 2026
Open Tender
Civil Works
Tender cum Auction
30 days
Hindustan Shipyard Limited
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹7,500
Yes
Hindustan Shipyard Limited
25 Aug 2026
27 Jul 2026
26 Aug 2026
27 Jul 2026
25 Aug 2026
31 Jul 2026
30 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing two(2) coats of synthetic enamel paint over a coat of zinc rich primer to steel surfaces like MS staircase, angles etc., of required colour using approved branded paints like Asian / Berger / Nerolac, after removal of paint on old surface using wire brush or sand paper to give an even shade etc., complete all as directed | 400 | Sqm | - | - |
| 2 | Supply, Fabricate and Fixing of Structural steel work using MS Angles, Square hollow pipes, Flat bars for cladding frame work and fabrication work (to be informed by HSL) including two coat of anticorrosive paint over one coat of primer complete all as directed by the Engineer Incharge. (Note:The nature of work is to be carriedout at 0-10M from the Ground level) | 1.3 | MT | - | - |
| 3 | Providing and laying plain cement concrete work in nominal mix of 1:2:4 (1 cement : 2 coarse sand (zone-III):4 graded stone aggregate 20mm nominal size), excluding the cost of centering, shuttering, finishing and including cost of cement (opc 53 Grade- UltraTech, ACC, Nagarjuna & KCP) and all materials & men etc., complete. | 6 | Cu.m | - | - |
| 4 | Supply and fixing of pre coated, Trapezoidal profiled Galvalume Roofing sheets (Size,shape and pitch of corrugation as approved by Engineer-in-charge). 0.50mm total coated thickness (TCT). Zinc Aluminium alloy coating AZ 150 as per IS27/ASTM 1379 in 550Mpa steel grade, painted with Silicon Modified Polyster 18-22 microns on top 5-8 microns Eproxy primer at bottom side of the sheet from Jindal / Bushan STeel . The sheet shall be fixed using self drilling / self tapping screws @500mm c/c along the length of purlins and wherever specified by engineer of size (5.5mmX55mm) with EPDM seal of make CORRO SHIELD/ BUILTEX/ HILTI. (Quoted rate shall inclusive of end and side laps of sheet, tape, sealer and closures and removal of old damaged galvalume sheets carefully , and handed over to good conditioned sheet to Dept.). Complete as directed. (Note:The nature of work is to be carriedout at above 10.0M from the Ground level) | 50 | Sqm | - | - |
| 5 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 kg / sq. mm with tape (0.52 mm thick) and weight 43.478 gm / metre and fixing the same with existing Y-shaped angle iron placed 2m apart and with 6 horizontal R.B.T. (Reinforced Barbed Tape) wire, stud tied with G.I.staple sand G.I.clips to retain horizontal, including necessary bolts, all complete as per direction of Engineer-incharge. (Cost of M.S. angle (Y –shape) shall be paid separately ) (Note:The nature of work is to be carriedout at above 10.0M from the Ground level) | 260 | Rmt | - | - |
| 6 | Providing and fixing RBT (Reinforced barbed tape 0.52 mm thick and weight 43.478 gm/ metre) horizontal wires for vertical portion of existing Y shaped angles with G.I staples and G.I clips to retain horizontal including making necessary cuts / holes in the supporting angles (Note:The nature of work is to be carriedout at above 10.0M from the Ground level) | 900 | Rmt | - | - |
| 7 | Supply and fixing of 6mm thick Chequered plate including cutting, welding, grinding and necessary consumables and providing painting two coat best quality anti corrosive paint over a coat of red oxide primer complete as directed by Engineer - in-charge (Note:The nature of work is to be carriedout at above 10.0M from the Ground level) | 1.2 | MT | - | - |
| 8 | Fabricating of structural steel by straightening, cutting and welding by using departmental suppied all types of steel sections such as plates, flats, pipes, angles etc of any size including erecting in position to line and level and applying two coats of paint over one coat of zinc rich primer, hire charges for tools and plants, other incidentals and all consumables etc. complete as directed by Engineer-in-charge. Note: weight shall be measured as per actual weight of material consumed at site. (steel issued free by HSL but loading and unloading is in contractros scope) (The nature of work is above 6m level) | 0.2 | MT | - | - |
| 9 | Chipping and removal of existing PCC/RCC surface upto required depth manually/mechanically including cleaning and disposal of debris out of HSL premises as directed by EIC. | 4 | Cum | - | - |
| 10 | Felling trees of the girth above 240cm girt (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material outside HSL. | 1 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
Tender Documents_2_Enclosure1MajorAgreementForms.pdf
Tender Documents • 1.13 MB
Tender Documents_4_Enclosure3FormatAcceptance.pdf
Tender Documents • 0.95 MB
Tender Documents_7_Enclosure6DetailedTermsandConditions.pdf
Tender Documents • 0.93 MB
Tender Documents_Check list for submission of tender.pdf
Tender Documents • 0.30 MB
Tender Documents_NIT.pdf
Tender Documents • 0.48 MB
Tender Documents_~$Enclosure6DetailedTermsandConditions.doc
Tender Documents • 0.00 MB
Commercial Documents_BS Decl.pdf
Tender Documents • 0.12 MB
Commercial Documents_GST Decl.pdf
Tender Documents • 0.11 MB
Commercial Documents_IMS.pdf
Tender Documents • 0.99 MB
Commercial Documents_Indemnity Bond.pdf
Tender Documents • 0.60 MB
Commercial Documents_No Due Certificate.pdf
Tender Documents • 0.00 MB
Commercial Documents_Tender Check List.pdf
Tender Documents • 0.20 MB
Commercial Documents_Undertaking Regarding Blacklisting Non Debarment.pdf
Tender Documents • 0.16 MB
Technical Documents_SoW.pdf
Tender Documents • 0.35 MB
Technical Documents_TTS.docx
Tender Documents • 0.03 MB
BOQ_109420.xls
BOQ • 0.40 MB
Due_Date_Ext2.pdf
PDF • 0.14 MB
Due_Date_Ext2.pdf
PDF • 0.14 MB
Due_Date_Ext2.pdf
PDF • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].