Supply & Delivery of (1) No of Vehicle Mounted Suction & Jetting Machine with Sewerage Water Recycling System of 4000 Ltrs Volume Mounted on Truck Chassis of 9 Ton GVW BS VI with Drivers Cabin and Side (Including of Cost 9T GVW Truck Chassis)

Supply & Delivery of the Vehicle mountad Suction & Jetting Machine with Sewage water Recycling System of 7000 liters volume as per technical specification enclosed as Annexure-B mounted on Truck Chassis of 18.50 Ton GVW BS-VI with driver's cabin and side PTO. (Including Cost of 18.50T GVW Trick Chassis) (TPS/AKISHA Any Equivater make) the following minimum specifications required: Min 185 Tons Gross Vehicle Weight Truck Chassis with minimum 180 HP Engine Power, with Mini 5200 MM Wheel Base Horizontally mounted 7.000 Litres (Capacity of the Sludge Recycled Water Tank should not be less than 6.000 Litres and Fresh Water shall be minimum 1000 Ltrs) and shall be fabricated out of 5 mm thick Stainless Steel SS 304 plates with vacuum 0.9 bar, 1 bar pressure. The High Pressure Jetting Pump shall be powered by the vehicle engine through suitable drive line power takeoff unit of 2000 KGM capacity Painted mild steel hydraulic-powered hose reel, mounted on the rear door of the tank, complete with rotating joint, automatic hose winding and hydraulic assisted swiveling. Pivoting angle of about 180 degrees hydraulically operated. The machine will be supplied with 120 meter Dia. 25 mm high pressure hose. The drum will have capacity to stock 120 M of 25 mm ID high pressure jetting hose TECHNICAL DATA SHEET Type High Capacity Suction & Jetting Machine with Sewage water Recycling System Truck Chassis 18.5 Ton GVW, BS VI Truck Chassis with Min 4900 MM WB Engine Power Min 180 HP Make TATA/ASHOK LEYLAND/BHARAT BENZ/EICHER/MAHINDRA or Equivalent Tank Capacity 7000 Liters (6000 liters sludge & Recycler water 1000 liters fresh waters) Triplex Reciprocating Jetting Pump, Flow 250 LPM Pressure 150 Bar, Make Mis Pratissoll, Italy or Equivalent. Vacuum Pump Type Positive Displacement Tn-Lobe Roots Type Vacuum Pump Cooling Arrangement-Air cooled, Free Air Handling Capacity 4500 M/Hr. DaPa Maximum Vacuum 80% Vacuum Make JUROP/HIBBON/TMVT/SWAM or Equivalent Auxiliary Engine Power 150 HP Make Ashok Leyland or Equivalent Suction Hose boom /High Pressure Jetting Hose Suction hose Dia 150 mm length High-pressure Jetting hose Dia 25 mm length 120 mtrs, on hydraulically operated hose reel Washing System Pump Capacity-Min 20 LPM Pressure 100 bar, Hoses (12 mm) inch. diameter and 15 meter long rubber hose Filtration Recycling System. Multistage fitration system incorporating Sedimentation-Filtration-Hydro-Cyclones Overall Horse Power Overall HP should be Minimum 330 HP (Including Chassis Engine) for effective, simultaneous & combined operation of Jetting & Suction ACCESSORIES Following accessories shall be supplied with each unit. Cost of which shall be included in the price bid 1) Suction Hose BID. of 3 Mirs length with Quick Coupling: -04 Nos. 2) Jetting hose 25 mm 1.0 120 Mtrs. in One Single Length-01 No. JETTING NOZZLES- De-choking nozzle 1 No. Forward Jet & 6 Nos. Reverse jot De-silting Nozzles (Reverse) only Flat Nozzle-1 No