MACHINERY AND PIPING JOB PACKAGE

After docking anchor and anchor chain cables to be lay down Total -16 nos of length, (Each- 27.5 m) All anchor chain cables ranging ,gauging and calibration to be carried out. (Each length 27.5 m) 440M

Renewal of Additional Chain Cables (Ship Supply) Each Length of chain 27.5 m

Renewal of kenter shackle (Ship Supply)

Renewal of Swivel adapter (Ship Supply)

Crop and renewal of evaporater coil base angle and supports. ** All material contractor supply

Remove and refit of AC condenser along with associated fittings.

Auxillary engine room supply blower (stbd) mushroom head full head face plate and lower mesh and projected part above flange fully corroded ,holed and thinned down , same to be cropped and renewed. Approx dimension. Vent head size - head top dia (900x8mm), slant palte circumference ( 5000x400x8mm), face plate circumference (5000x400x8mm), inspection door size ( 400x300x8 mm), inner bracket (1500 x 80x 8mm)-02 nos , rubber beeding outter channel lips (4000x40x8mm),inner lips (3500x40x8mm), lifting eye pad (230x140x8mm)-02 nos, holding round bar ( 450x16mm) projected trunk (3900x500x8mm), upper & lower flange (5000x50x8mm)-02 nos, no of holes 20 nos, SS nut & bolt (18mm & 20 mm), rectangular shape mesh 3mm -(800x500x300)-06 nos, round bar for mesh (800x500x300x10mm)-06 nos, rubber beading to be renewed as per sample (4500x50x40mm), mesh supporting bar inner (320x50x8mm)-18 nos, supporting bracket (100x70x50x8mm)-10 nos. for the above work remove and refit of blower mushroom head and spindle. rubber packing (900x30x20mm). ** All material contractor supply

Fire line pressure gauge upper flange corroded and thinned down , same to be cropped and renewed. Approx size ( (200x20mm), no of slots 04 nos, nut & bolt -04 nos as per sample. ** All material contractor supply

Forward stbd pedestal roller play much due to continous friction of tappared spindle , Spindle to be renewed as per the sample and size . ** All material contractor supply

Crane platform scrumbling horizontal pipe corroded holed holding pipe also damaged , same to be cropped and renewed. Approx size - verticle pipe ( 1800x50mm)-02 nos, Horizontal pipe ( 530x50mm)-06 nos, supporting guard pipe (1000x50mm)-02 nos. sch40 GI pipe ** All material contractor supply

Paint store exhaust mushroom vent middle flange and verticle projected fully corroded and renewed.. Approx size projected part ( circum- 1100mm), ourt lip (height 60mm) thickness 8mm, lower flange (circum- 1380mm) projected part (45mm), thickness ( 08mm), nut & bolt- (16mm -08 nos). ** All material contractor supply

Windlass guide bar (port & stbd) fully thinned down and uprooted from base. same to be cropped and renewed . fixed back with 04 nos of nutt and bolt .Approx size ( 18 mm -04 nos)-01 no , base plate (180x150x18mm)-01 no, guider bar (540x120x50mm)-01 no, brackets (110x30x18mm)-02 nos, no of slot of 20mm, same to be fabricated on main windlass foundation athwartship plate-08 nos. ** All material contractor supply

Windlass foundation base frame distance bar brackets fully corroded , wasted and thinned down , same to be cropped and renewed. Need to remove or dismantle and refit of entire windlass unit from upper frame and after fabrication new base to be refitted in its original space . approx size - long bracket ( 400x350x180x10mm)-08 nos, longitudinal base plate (1220x140x12mm)-04 nos, transverse base plate (2100x140x12mm)-04 nos, welded MS clampbase frame with lower base ()120x130x50x12mm)-08 nos, total nut & bolt to be unscrewed -20mm -19 nos, total distance piece bar (140x130x20mm)-20 nos, transverse top platfrom base (2100x140x12mm), longitudinal top plat form base (1220x140x12mm), windlass fixing nut & bolt renewed -( 30mm-16nos), guider bar nut and bolt renewed (20mm-08 nos), windlass base transverse coaming (2100x115x10mm)-02 nos, windlass base longitudinal coaming (2100x115x10mm)-02nos, small brackets for aft of windlass (165x180x180x14mm)-07 nos, small brackets for fwd of windlass (135x120x140x14mm)-07 nos, windlass fwd vertical supporting MS bar (100x60x14mm)-10 nos. ** All material contractor supply

Forecastle deck windlass stbd side guide roller stucked and rotating freely and missalligned from place , same to be cropped and refitted back in position and alligned properly. ** All material contractor supply

In crane platform , anchor ball hoisting shaft fully corroded and thinned down , same to be cropped and renewed. Approx size ( 5000x40mm), top plate (100x70x8mm), supporting guard (70x30x8mm), hoisting pully with swivel SS) -01 no as per sample, horn clit -(300x8mm) round bar- 02 nos. ** All material contractor supply **Pulley & swivel ship supply

Bunker point drip tray drain plug missing, same to be provide with new plug along with SS chain. Drain plug size (20mm), SS chain -(length-200 mm x dia 4mm) ** All material contractor supply

OTHER MISSLANEOUS DEFECTS

Ships 'RO' Aqua guards full servicing due, same to be carried and if required membrane, fillters and UV fillters to be renewed. Total nos of Aqua guard- 07 nos. A) Make- Aqua sure -02 nos, B) Make- Whirlpool -05 nos, C) required spare fillters - 35 nos. ***All spare ship supply.

Officers pantry food lift steel wire rope found damaged , same to be renewed. Approx size (L-25mx Dia-8mm) wire rope construction (6x36) ***Wire rope & all spares shipsupply.

PORT MAIN ENGINE; Make BERGEN ,MODEL: KRMB 9, BHP 2480, 9 Units/Engine

Following jobs to be carried out on Port Main Engine and satisfactory trial to be Shown to ship staff.

Port main engine sump oil to empty ,clean and Refilled. Fresh oil to supplement from ship stock. Approx 900 Ltr oil to be removed from the sump, sump to be cleaned and shown to ship staff. ***Oil & all spares ship supply

STBD MAIN ENGINE; Make BERGEN ,MODEL: KRMB 9, BHP 2480, 9 Units/Engine

Following jobs to be carried out on Starboard Main Engine and satisfactory trial Shown to ship staff.

STBD main engine sump oil to empty ,clean and Refilled. Fresh oil to supplement from ship stock. Approx 900 Ltr oil to be removed from the sump, sump to be cleaned and shown to ship staff. ***Oil & all spares ship supply

AUXILIARY ENGINES (MAKE: SACM DIESEL WARTSILA,MODEL: UD 25 V12 S3D, 560KVA) ***All spares ship supply

Alternator driving side coupling and pads of all three Aux engines 1, 2 and 3 to check, and worn out parts to renewed with Ship supplied spares. Satisfactory trial to be shown to ship staff.

SEWAGE SYSTEM Type: THPC 1000, Capacity-37m3/hr.Air cooled. ***All spares owner supply

The following job to be carried out and shown to be ship staff and surveyor for inspection and ISPP renewel certificate.

Pump suction and delivery valves 4nos (size 32mm Gate valves) to be overhauled. and presure test to 5kg/cm2. satisfactory trial shown to ship staff.

Sewage holding tank discharge pump to overhaul.type-SH32-11ON/58/3,SL NO-35817,DISCHARGE 6M3/HR,HEAD 12MWC,RPM-2900,DRIVE HP-1.5. satisfactory trial shown to ship staff.

Sewage holding tank discharge pump motor to overhaul and satisfactory trial shown to ship staff.capacity-1.10kw

WINDLASS Make:Ridderinkhof, Pull 10 Ton at 10M/min ***All spares owner supply

Following jobs to be carried out on windlass machinery (Satisfactory trial to shown ship staff).

Windlass Gear case and gears to be checked wornout parts to be renewed and oil to renew from ship supply. trial Shown to ship staff.

Brake linings to renew (contractor to supply).Size: 980 x 100x 10 mm, CSK Brass screw 36 nos, 8mm dia x 30 mm long for each half, trial Shown to ship staff.

Slip clutch to open and check. worn out parts to be renewed. After boxing up load test to be carried out and Satisfactory trial to be shown to ship staff. Spare contractor supply.

STEERING GEAR (PORT AND STARBOARD) :

Both steering system oil to check and renew from ship supply and satisfactory trial to be shown to ship staff.

Filters to renew and trial shown to ship staff. ***All spares ship supply

All safeties and alarms to check & try out. Any faults to be rectified and shown to ship staff.

Both tanks to be cleaned and ventilated and shown to ship staff.

Port inner and outer steering gear machinery unit, Stbd inner and outer steering gear machinery unit, hand operated steering gear(port & stbd) to check for smooth operation and rectified and shown to ship staff. ***All spares ship supply

Following pumps to overhaul completely and aligned. Successful trial to be shown to ship staff. ***All spares ship supply Multipurpose joint ,ss bolts and nuts to be supplied by contractors. Pumps marked for survey to be shown to survey and ship staff.

AC chiller water pumps, Vertical Centrifugal pump, Capacity: 180 m3/hr:- 02 nos. Make johnson pump, Type-combiprime V

AC cooling sea water pumps, Vertical centrifugal Pump Capacity: 265 m3/hr. Make johnson pump, Type-combiprime V

Hot water circulating pump-Fwd and aft.( M/S BE, TYPE- A 03620 KH) and satisfactory trial to ship staff.

COOLERS / CONDENSERS:

Following coolers tube stags to be taken out and chemically cleaned. Rubber rings and joints to be changed. After boxing up same to be pressure tested. New "O" rings/joints to fit (contractor supply) and shown to ship staff. ** All spares ship supply

Accom. A/C condenser (Port) Dia.-60cm, L-265cm. satisfactory trial to be showned to ship staff.

Renewal of inlet and outlet covers

Accom. A/C condenser (Stbd) Dia.-60cm, L-265cm. satisfactory trial to be showned to ship staff.

Renewal of inlet and outlet covers

RDFF FIXED WATER-BASED LOCAL APPLICATION FIRE-FIGHTING SYSTEM: **All material contractor supply

All the nozzles to be taken out from the position and cleaned & refitted

Entire pipe line to be pressure test upto 15Bar, Dia of pipe 28mm.

MISCELLENOUS REPAIR :

Suction and discharge pressure gauge gauge copper pipe line to make with adaptor for various pumps. 6mm dia pipe and associated ferrols and nipples for various pumps to be fit and shown to ship staff. **All material contractor supply

All Air handling units(04nos) evaporator coils to be cleaned with sutable chemical cleaning and shown to ship staff. cleaning materials to be contractor supply. AHU1 L=1500mm,B=530mm,H=1000mm AHU2 L=1460mm,B=530mm,H=1140mm AHU3 L=1500mm,B=530mm,H=1140mm AHU4 L=870mm,B=530mm,H=1500mm

Port and STBD main sea chest filter top cover to renew. Dia-850mm , thikness-12mm , No. of bolts-23 hole dia26mm with 2 handels each and purging cock to be shown to ship staff. **All material contractor supply

Air Handling Unit # 1(Bridge deck port side) to be overhauled .Plumber block bearing 2nos,inlet cone missing same to fabricate and fit,impeller to be balanced.Alignment to done.Satisfactory trial to shown to ship staff. FAN SIZE GFBB-5-50,Air Quantity-12310CMH,Total PR 240mm wg,motor 18.64 kw **All spare ship supply including Plumber block bearing 2nos,inlet cone.

AIR VENTS **All Sch 80 & 40 pipes, flanges, bends, plates, mesh, sleeves, penetration, gland packings, Reducers, Nut&Bolts(SS), ball and Gaskets for pipeline under contractor supply ** After fabrication and pressure testing, the pipes and air vent is to be painted.

Crop and renewal of tanks air vent pipe and sounding pipes penetration work of stub & disatance pieces at various size. (180NB-18 NOS, 140NB-20 NOS,100NB-12, 115NB-02 NOS, 80NB--12 NOS ,90NB-09,60NB- 13 NOS, 40NB-04 NOS, 15NB-05 NOS, 12NB-05 NOS).

Renewal of MS Sch 80 Dia 180NB pipe-1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 140NB pipe-1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 100NB pipe -1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 115NB pipe -1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 80NB pipe -1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 90NB pipe -1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 60NB pipe-1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 40NB pipe -1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 15NB pipe-1 Mtr with penetration sleeve & pad

Renewal of MS Sch 80 Dia 12NB pipe -1 Mtr with penetration sleeve & pad

Removal & Reuse of flange-180NB

Removal & Reuse of flange-180NB

Removal & Reuse of flange-140NB

Removal & Reuse of flange-100NB

Removal & Reuse of flange-115NB

Removal & Reuse of flange-80NB

Removal & Reuse of flange-90NB

Removal & Reuse of flange-60NB

Removal & Reuse of flange-40NB

Removal & Reuse of flange-15NB

Removal & Reuse of flange-12NB

Removal and Re-fitment of air vents-180NB

Removal and Re-fitment of air vents-140NB

Removal and Re-fitment of air vents-100NB

Removal and Re-fitment of air vents-115NB

Removal and Re-fitment of air vents-80 NB

Removal and Re-fitment of air vents-90 NB

Removal and Re-fitment of air vents-60 NB

Removal and Re-fitment of air vents-40NB

Removal and Re-fitment of air vents-15NB

Removal and Re-fitment of air vents-12NB

Removal and Re-fitment of Sounding cap- appx. 65 NB

Remove and refit tanks air vents and pipes pipe at various sizes,(125NB- 04 NOS,100NB- 04 NOS,80NB-04 NOS,65NB- 06 NOS,50NB- 05 NOS,40NB-06 NOS, 25NB- 05 NOS).

Removal and Re-fitment of air vents-125NB

Removal and Re-fitment of air vents-100NB

Removal and Re-fitment of air vents-80NB

Removal and Re-fitment of air vents-65NB

Removal and Re-fitment of air vents-50NB

Removal and Re-fitment of air vents-40NB

Removal and Re-fitment of air vents-25NB

Removal and Re-fitment of MS Pipeline 125NB

Removal and Re-fitment of MS Pipeline 100NB

Removal and Re-fitment of MS Pipeline 80NB

Removal and Re-fitment of MS Pipeline 65NB

Removal and Re-fitment of MS Pipeline 50NB

Removal and Re-fitment of MS Pipeline 40NB

Removal and Re-fitment of MS Pipeline 25NB

All air vent heads are to be overhauled and damaged parts are to be renewed: like-side cover, wire mesh, inside ball, etc. All air vents are to be inspected by the surveyor, and a pressure test to be shown to survey. **All Material contractor supply

Upper deck stbd side WB tanks 19 (S) vent head size ( 1200 C x 250 x 6mm), face plate inner & outer (400x400x6mm)-02 nos, inspection door (350x250x6mm)-02 nos, door mesh, (350 x250mm)-02 nos, vent pipe dia-140mm, length- 300mm to be renewed **All Material contractor supply

Upper deck stbd side FW tanks 22 (S) vent head size ( 1200 C x 250 x 6mm), face plate inner & outer (400x400x6mm)-02 nos, inspection door (350x250x6mm)-02 nos, door mesh, (350 x250mm)-02 nos, vent pipe dia-140mm, length- 300mm, upper flange dia (240x20mm), no of holes 08 nos, holes dia -16mm, SS nuts & bolt 08 nos as per sample to be renewed. **All Material contractor supply

Upper deck port side FW tanks 27 (FWD) vent head size ( 1200 C x 250 x 8mm),face plate inner & outer (400x400x8mm)-02 nos, inspection door (370x250x6mm)-02 nos, door mesh, (250 x250mm)-02 nos, vent pipe dia-140mm, length- 500mm, upper flange dia (250x20mm),no of holes 08 nos, holes dia -16mm, SS nuts & bolt 08 nos , inside rubber seat -01 no, as per sample to be renewed. **All material contractor supply

The upper deck port side FW filling pipe is fully corroded and thinned down, the same is to be renewed, size 90NB- 1.3Mtr ,Sch 80 GI pipe with 1 bend & 2 Flanges. **All material contractor supply

Upper deck LO filling (diptray) flush discharge line fully corroded, thinned down, same to be renewed from lower flange. Approx dia pipe 60mm, L-750mm, flange dia (165x15mm)-04 nos, SS nut & bolt -16mm -08 nos, including bend 01 no, sludge discharge pipe dia-80mm, L- 450mm, bend 01 no, flange dia -180x15mm-04 nos, no of holes -08, hole dia- 12 mm, SS nuts & bolt 08 nos to be renewed.Sch 80 GI pipe . **All material contractor supply

Upper deck dirty oil tank air vent projected upward portion from flange fully corroded and thinned down, same to be renewed. Dimensions - vent head size ( 700 C x 150 x 6mm),face plate inner & outter ( 240x240x6mm)-02 nos, inspection door (240x140x6mm)-02 nos, door mesh (200 x140mm)-02 nos, vent pipe dia-75 mm, length- 500mm, upper flange dia (180x20mm), no of holes 08 nos, holes dia -16mm, SS nuts & bolt 08 nos-12 mm , inside rubber seat -01 no, to be renewed, **All material contractor supply

Upper deck ME L.O filling pipe near aft bollard corroded and thinned down upper projected portion from flange , same to be cropped and renewed. Dimensions- pipe (L- 500X Dia 65mm), bend 01 no, to be renewed,Sch 80 pipe . **All material contractor supply

Upper deck gear oil filling pipe fully corroded thinned down , upward projected part from flange , same to be cropped and renewed. Approx Dimensions- pipe (L- 800X Dia 65mm), bend 01 no, upper flange dia 180 x 20mm)-02 nos, no of holes -04 nos , SS bolt & nut 16 mm -04 nos to be renewed,Sch 80 GI pipe . **All material contractor supply

Upper deck aft FW filling pipe of 2P, above portion from lower flange fully corroded and thinned down , same to be renewed. Approx Dimensions- pipe (L- 800X 500x Dia 100mm), bend 01 no, to be renewed,Sch 80 GI pipe . **All material contractor supply

Upper deck stbd side near gangway area cofferdam head lower flange and stub pieces fully corroded and thinned down , same to be cropped and renewed. Approx -(pipe dia-75mm), length-450mm, flange dia (190x20mm), no of slots -18 mm -08 nos, nut & bolt -18mm-08 nos, stub piece dia (100x75mm), inspection door (200x40x6mm)-02 nos, head (680x140x6mm), mesh -(140x100)-02 nos, head inner & outer face plate(240x240x6mm)-02 nos to be renewed, **All material contractor supply

UNDER WATER STORM VALVE OVER HAULING AND SHOWN TO SHIP & SURVEYOR. ** All spares Ship Supply ** All Nut & Bolts(SS), gaskets, gland packing, etc material contractor supply.

Storm valve - 100 NB

Drain cock dia- 20NB

Storm valve - 150 NB--02Nos

Drain cock dia- 16NB--02Nos

BALLAST & DE BALLAST VALVES OVER HAULING IN ENGINE ROOM & AUXILLARY ENGINE ROOM ** All spares Ship Supply ** All Nut & Bolts(SS), gaskets, gland packing, etc material contractor supply. ** After overhauling and pressure testing, thevalve is to be painted.

FW master valve in shaft room (stbd) valve not holding properly, same to be overhauled. 100 NB, PCD-170mm. Type- Globe valve,

Ballast & de-ballast chest valves 1 (P), 1 (S), and 5 (P&S) not holding properly, same to be overhauled. Specification - 100NB, PCD-170mm. Type- Globe valve, Chest valve Type- Globe( return valve )

Ballast & de-ballast chest valve 11 (P&S), 24 (P&S) , 29 (FPK), 19 (P&S) not holding properly, same to be over hauled. Specification - 100NB, PCD-170mm. Chest valve Type- Globe ( return valve ).

FW chest valve in auxillary engine room no 27 (P), 28(S), 25(P), 26(S) not holding properly, same to be over hauled. Specification - 90NB, PCD-170mm.Chest valve Type- Globe ( return valve )

Dormitory -F bilge valve (P&S) not holding properly, same to be over hauled. Specification - 100 NB, PCD-120mm.Type- Globe valve,

Dormitory -G bilge valve (P&S) not holding properly, same to be over hauled. Specification - 100 NB, PCD-120mm. Type- Globe valve,

Cargo hold bilge valve (F&A) not holding properly, same to be over hauled. Specification - 80NB, PCD-120mm.Type- Globe valve,

Sea suction butterfly valve for (G.S pump) located at auxillary engine room not holding properly same to be over hauled. Specification - 100NB, PCD-120mm.Type butterfly valve

SW to STP galley port over head valves to be overhauled, location freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm , flange to flange -120mm

HW to STP galley & cafeteria over head valves to be overhauled, location freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm, flange to flange -120mm

FW to STP galley & cafeteria over head valves to be overhauled, location freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm ,flange to flange -120mm

FW to crew galley over head valves to be overhauled, location freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm ,flange to flange -120mm

HW to crew galley over head valves location to be overhauled, freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm ,flange to flange -120mm

SW to crew galley over head valves location to be overhauled, freeboard deck aft, specification - gate valve 25 NB, PCD 85 mm ,flange to flange -120mm

HW to crew galley STP & Cafteria in front of of cadet cabinover head valves to be overhauled, location freeboard deck aft, specification - gate valve 40 NB, PCD 85 mm ,flange to flange -180mm

FW to crew STP/Galley /Mess room & Cafteria in front of of cadet cabin over head valves to be overhauled, location freeboard deck aft, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -180mm

FW & HW valves to be overhauled, in crew toilet , location freeboard deck aft, specification - gate valve 40 NB, PCD 85 mm ,flange to flange -180mm

FW & SW valves to be overhauled, in passenger gents toilet (aft), location freeboard deck aft, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -180mm

SW valves to be overhauled, in passenger ladies toilet (aft), location freeboard deck aft, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -180mm

SW valves to be overhauled, in passenger gents toilet (fwd), location freeboard deck aft, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -125mm

SW valves to be overhauled, in passenger ladies toilet (fwd), location freeboard deck aft, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -125mm

FW valves to be overhauled, to hospital, location boat deck, specification - globe valve 40 NB, PCD 85 mm ,flange to flange -185mm

Fire line relief valve to be overhauled, located at port side passenger ladies toilet specification 100NB relief valve.

Speed log valve to be overhauled, -100NB gate valve in cofferdam space

Water cooler near entrance of DOR-G, scupper fully chocked , same to be cleared.

Main deck aft port side ISC fire hydrant alternate line corroded and thinned down, ISC connection outer flange also thinned down , same to be cropped and renewed. Approx size -02 bends , length- 190mm , dia 90mm, flange dia (190x20mm), slots 04 nos - 18mm.Material - Sch 80 GI

PLUMBING JOB 1. MS Pipeline (Sch 80 and Sch 40) contractor supply 2. All flanges, bends, plates, mesh, sleeves, penetration, gland packings, Reducers, Nut&Bolts(SS), and Gaskets for pipeline and valves contractor supply 3. After fabrication/overhauling and pressure testing primer application (valves and pipelines) is to be done by the contractor. 4. Pipe galvanization wherever mentioned in the scope is under the contractor's scope 5. All in-way Jobs included, cleaning, removal & Refitment of any items/material under contractor scope.

In the main engine room, the stbd aft sewage line (sch-80 GI), is holed and leaking water, same is to be cropped and renewed. Approx size ( dia-165mm, sch-80), flange to flange length- 2500 mm, connecting bend length- 230mm, dia - 115mm, connecting bend length -230 mm, bend size -(60mm), connecting bend length- 200mm, size -(120mm).

In the main engine room, the stbd side crew WC discharge line is holed and leaking, the same is to be cropped and renewed. Renewal of pipe line,Sch 80 GI-115mm dia - 1Mtr,Deck Penetration-2Nos,Reducer-2Nos & renewal of cock valve-50NB-1Nos

In AE room overhead of AE-1 sanitary line sch-80 GI pipe holed and cracked, same to be cropped and renewed, Renewal of sch80 GI pipe(sewage) with 2 bends.

In the main engine room, aft of the ECR top beyond the stbd M/E exhaust, the sewage pipeline sch-80 was found holed and thinned down, and the same is to be cropped and renewed. Approx size -Sch 80 GI pipe -( 4500x120mm). remove and refit of air pipe 1/2 inch with clamp- 6mtrs, CO2 line 1 1/2 inch with clamp- 6 mtrs, sewage line clamps with associated fittings.

In upper deck stbd ford fire hydrant lower flange fully corroded and thinned down including holding clamp, same to be cropped and renewed. Approx PCD-150(04 slots)-3 inch, clamp (180x30x4mm)-02 nos with 02 nos nut & bolt, sch-80 GI pipe.

In upper deck Air hydrant pipe line flange fully corroded and thinned down , same to be cropped and renewed. Approx size flange – (65 mm PCD -04 slots) thickness-20mm, pipe line ,Sch 80 GI ,dia -1/2 inch, length-6000mm.

Port side forward near anchor wash master valve fire hydrant pipe line fully corroded and thinned down , same to be cropped and renewed. Approx size - penetration work pipe (410x180x75mm)-01 no , sch-80 GI pipe including bend -01 no, reducer (100x30mm). For the defect RR - remove and renewed pipe line from place from flange to flange and re use of same flange.along with associated fittings, bends , sleeves, penetration work.

In paint store sprinkler pipe line branch line inner dia chocked and pipe line corroded , same to be cropped and renewed. Approx size ( 1300x60mm), reducer to be removedfrom branch line same to be fabricated with flange, branch line -(3100x25mm), total flange -06 nos ( dia-95mm x thickness 14mm), sch-80 GI pipe no of slots -12 nos (16mm dia), rubber packing -03 nos (thickness - 4mm)as per sample.For the defect RR - remove and renewed pipe line from place from flange to flange and re use of same flange, along with associated fittings, bends , sleeves.

In boat deck stbd seawage line penetrationg through boat deck , stub piece & distance piece including including pipe line corroded and thinned dowmn , same to be cropped and renewed. Approx size pipe -(L-600 X dia-140mm), stub piece -(L-180 X dia-70mm), distance piece -(L-140 X dia-180mm) sch-80 GI pipe. For the defect RR - remove and renewed pipe line from place from flange to flange and re use of same flange, along with associated fittings, bends , sleeves, penetration work.

Freeboard deck passenger toilet scupper line cracked holed water leaking to DOR-F, same to be rectified and renewed pipe lines. Approx size ( 3500 mm x 40NB) sch-80 GI pipe, penetration job including 04 bends , sleeves, reuse of flange 02 nos. along associated fittnings. For the defects required RR works , AC ducting pipes, tube light frames

Freebpoard deck Passenger ladies toilet fwd extreme end scupper line chocked and cracked, same to be rectified and renewed pipe lines. Approx size ( 3500 mm x 40NB) sch-80 GI pipe penetration job including 04 bends , sleeves, reuse of flange 02 nos. along associated fittnings. For the defects required RR works of AC ducting pipes, tube light frames

Freeboard deck Passenger ladies toilet aft first shower scupper line chocked and cracked, same to be rectified and renewed pipe lines. Approx size ( 3500 mm x 40NB) sch-80 GI pipe penetration job including 04 bends , sleeves, reuse of flange 02 nos. along associated fittnings. For the defects required RR works of AC ducting pipes, tube light frames

Freeboard deck crew toilet wash basin pipe line chocked and cracked, same to be rectified and renewed pipe lines. Approx size ( 2000 mm x 40NB) sch-80 GI pipe penetration job including 04 bends , sleeves, reuse of flange 02 nos. along associated fittnings. For the defects required RR works of AC ducting pipes, tube light frames .

Master cabin toilet commode sanitary flush valve non ops, same to be renewed as per sample along with sch-80 GI dia 50 mm pipe line all associated fittings, including bends, sleeves, joints.

In forward paint store anchor wash main branch pipe line including 3 dimensional jet lines fully corroded and wasted . Inner dia reducer and restricted flow of jet . All pipe lines to be renewed along with flanges associated fittings. Approx dimension- main anchor wash pipe line Sch 80 GI(1650mm L x Dia 50mm), main line flange dia (150x12mm) including 04 slots dia-18mm, reducer lne length-2500mm, jet line (450x50mm) including 02 bends in each line , total nos of jet lines-06 nos, (450x40mm)-06 nos including 12 bends. total n of jet flange-08 nos, flange dia-150mm -08 nos, each flange 04 nos slot dia-16mm, hawse pipe reducer to be cropped 15mm and fixed with 40mm adapter with inner flange, no of rubber packing required -16 nos, as per size of flange, both (p&s) lines are oval shaped, adapter length-(60x40mm)-06 nos. for the work required remove and renewal of pipe lines.

Fresh water sounding pipe of no 23 not holding properly, same to be renewed with SS threaded pipe and cap as per sample. Required penetration work. Approx size pipe (dia -65mm, x 150mm), for the work required penetration job along with associated fittings, bends , sleeves.

Officers mess room wash basin pipe line fully chocked , same to be chock cleared. Required penetration job with fresh water supply line pipe line ( 1500x40mm),& (2000x12mm).

SEA CHEST VALVES:

Following sea chest valves to overhaul /recondition for true sealing and pressure tested to 5kg/cm2 to shown surveyor and ship staff. ** All spares Ship Supply ** All Nut & Bolts(SS) , gaskets, gland packing, etc material contractor supply. ** After overhauling and pressure testing, the valve is to be painted.

Main sea chest v/v S.D type angular size –DN 250

Aux. Sea chest v/v S.D type angular size –DN 125

Sea chest air valve ME/AE S.D type angular size –DN 50

A/C sea chest v/v S.D type angular size –DN 150

Sea chest air v/v for A/C S.D type angular size –DN 50

Emg. Fire pump sea chest v/v S.D type angular size –DN 100

Emg. Fire pump sea chest Air vent valve SD type globe valve size --DN 50MM

Emergency fire pump sea chest blown through valve size --SD 15MM

Fridge cooling SW pump suction filter element to be fabricated as per sample Length 248mm Dia 100mm Flange dia inner 97mm and Outer dia 147mm Plate thickness 3mm,

OVER BOARD VALVES :

Following overboard valves to overhauled and shown to surveyor and ship staff. ** All spares Ship Supply ** All Nut & Bolts(SS), gaskets, gland packing, etc material contractor supply. ** After overhauling and pressure testing, the valve is to be painted.

M.E s w over board v/v S.D.N.R type size –DN 125

A.E s w over board v/v S.D.N.R type size –DN 100

A/C S.W. over board v/v S.D.N.R type size –DN 125

Emg. S w over board v/v S.D.N.R type size –DN 100

OWS over board v/v S.D.N.R type size –DN 65

Dom. Fridge over board v/v S.D.N.R type size –DN 80

Sewage over board v/v STROM type size –DN 125

Sewage over board v/v STROM type size –DN 100

Wash water overboard v/v STROM type size –DN 100 .

Fire and G.S. pump over board v/v in ME Room S.D.N.R type size –DN 100

Freshwater generator overboard valve in engine room S.D.N.R DN 100 angle valve

SEA WATER INTERMEDIATE VALVES:

The following valves are to be overhauled and shown to ship staff. ** All spares Ship Supply ** All Nut & Bolts(SS), gaskets, gland packing, etc material contractor supply. ** After overhauling and pressure testing, the valve is to be painted.

M.E after S.W. main filter Butterfly type size –DN 250

Before main sea-chest strainer valves(P&S), size-250mm, PN1-6,angle globe valve.

M.E lub oil cooler v/v stop regulating type size –DN 100

SW outlet valve from all 3 AE. S.D.N.R type size -DN 65

S.W hydrophore pump Suction & discharge S.D.N.R type size –DN 50

Fire line safety v/v pr tested to 5.5 bar and to be shown to surveyor Angle v/v size –DN 100

AC cooling chiller pump suction valves butterfly type size-DN-180mm

PIPELINES : **All Sch 80 & 40 pipes, flanges, bends, plates, mesh, sleeves, penetration, gland packings, Reducers, Nut&Bolts(SS), and Gaskets for pipeline under contractor supply ** After fabrication and pressure testing, the pipe is to be painted. ** All in-way Jobs included, cleaning, removal & Refitment of any items/material under contractor scope.

The A/E sea chest line is the same to be renewed. Material: MS sch 80, Diameter of pipe- 250mm.

Remove ,refit and cleaning of branch pipe-2Mtr each,4Nos

Remove and refit of butterfly valves

Renewal of MS Sch 80 Bend Dia 250mm

Renewal of flanges Dia 250mm

Engine room port side entrance S.W lines to be renewed, MS Sch 80 Diameter =60mm.

Renewal of MS Sch 80 Short Bend Dia 60mm

Renewal of flanges Dia 60mm

Below fridge compressor stbd freshwater hydrophore pump suction line corroded and wasted same to be renewed MS Sch 80, Diameter 90mm.

Renewal of MS Sch 80 Bend Dia 90mm

Renewal of flanges Dia 90mm

Grey water above main air comp fwd to be renewed. MS sch 80, Diameter 60mm.

Renewal of MS Sch 80 Bend Dia 60mm

Renewal of flanges Dia 60mm

The emergency fire pump relief valve outline is corroded and wasted same to be renewed. MS Sch 80, Diameter-90mm.

Renewal of MS Sch 80 Short Bend Dia 90mm

Renewal of flanges Dia 90mm

The emergency fire pump bottom suction line corroded and wasted same to be renewed. MS Sch 80, Diameter-75mm.

Renewal of MS Sch 80 Bend Dia 75mm

Renewal of flanges Dia 75mm

Sea water hydrophore to fridge compressor SW condenser inlet pipe disconnected same to be reconnected. Sch40 MS pipe Diameter-27mm.

Renewal of MS Sch 40 Bend Dia 27mm

The main engine MDO service tank(33p) outlet pipeline corroded and wasted same to be renewed. MS Sch 40 Diameter-27mm.

Renewal of MS Sch40 Bend Dia 27mm

Renewal of flanges Dia 27mm

Below engine room Ladder port gearbox condenser outlet pipe corroded and wasted same to renewed. MS Sch 80 Diameter-75mm .

Renewal of MS Sch 80 Bend Dia 75mm

Renewal of flanges Dia 75mm

A/C cooling sea water pump suction line juntion pipe(4nos branch) corroded and wasted same to be renewed. Material MS SCH 80dia-240mm,1 Mtr Length for each branch

Renewal of sch 80 Branch pipe-Dia 116mm,Length 300mm each

Renewal of MS Sch 80 Bend Dia 116mm

Renewal of flanges Dia 116mm

AE-2 sea water condenser outlet pipe corroded and wasted same to be renewed. MS Sch 40, Diameter-75mm

Renewal of MS Sch 40 Bend Dia 75mm

Renewal of flanges Dia 75mm

A/C condenser stbd sea-water inlet pipe corroded and wasted same to be renewed. MS Sch 40 Diameter 220mm

Renewal of branch pipe Sch 40 MS pipe ,Dia-220mm & Length 300mm

Renewal of MS Sch 40 Bend Dia 220mm

Renewal of flanges Dia 220mm

The A/C condenser stbd sea water outlet pipe corroded and wasted same to be renewed. MS Sch 40 Diameter-170mm

Renewal of MS Sch 40 Bend Dia 170mm

Renewal of flanges Dia 170mm

Ballast and de-ballast line bottom of AE compartment fire & GS and bilge pump corroded and wasted same to be renewed. MS Sch 80 Dia-90mm.

Renewal of MS Sch 80 Bend Dia 90mm

Renewal of flanges Dia 90mm

VOYAGER MARINE SERVICES INDIA PRIVATE LIMITED (BID ID -837250)

Island Ship Repairers (BID ID -839137)

RAREFIELD ENGINEERS PVT LTD (BID ID -837957)