ICDS`

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

1 Excavation for foundation upto 1.5 m depth including 157.20 Cum 212.52

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1 cement : 45.90 Cum 2945.16

4 coarse sand : 8 B.T. machine crushed stone aggregates

40 mm nominal size) and curing etc. complete excluding

cost of form work in foundation and plinth.

3 Providing and laying ordinary cement concrete 1:1½:3 30.90 Cum 4659.21

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in (A)

Foundations, footings, base of columns and mass

4 Providing and laying ordinary cement concrete 1:1½:3 3.90 Cum 8022.71

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in

Columns up to Plinth level.

5 Providing and laying ordinary cement concrete 1:1½:3 30.90 Cum 4567.76

(M-200) using B.T. stone aggregate & curing complete

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Ground Beam.

6 Filling available excavated earth (excluding rock) in 72.60 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering.

7 Brick work using common burnt clay building bricks 53.40 Cum 4245.09

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand)(B) Conventional

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

9 Filling in plinth with sand under floors including 64.80 Cum 481.80

watering ramming, consolidating and dressing complete

BOQ Page No.1

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

10 Carring out plinth treatment to post construction / 240.00 Sqm 124.35

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

11 Providing and laying cement concrete 1:2:4 (1- Cement : 30.30 Cum 3757.61

2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

12 Providing and laying ordinary cement concrete 1:1½:3 10.80 Cum 8022.71

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in

Columns for all floor level.

13 Brick work using common burnt clay building bricks 109.80 Cum 4526.81

having crushing strength not less than 35 kg/Sq.Cm. in

superstructure above plinth level upto floor two level in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional brick etc. complete

14 Providing and laying cement concrete 1:3:6 (1-Cement : 25.50 Cum 3270.55

3- coarse sand : 6- B.T. machine crushed stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

15 Providing and laying ordinary cement concrete 1:1½:3 11.70 Cum 7191.41

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in

Lintels for all floor level.

16 Providing and laying ordinary cement concrete 1:1½:3 30.90 Cum 6338.77

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in

Beams for all floor level.

17 Providing and laying ordinary cement concrete 1:1½:3 39.00 Cum 6636.92

(M-200) using B.T. stone aggregate and curing of

concrete complete, including the cost of form work but

excluding the cost of reinforcement for R.C.C. work in

Slab for all floor level.

18 Providing TMT Bar FE 500D reinforcement for R.C.C. 15348.00 kg 77.29

work including bending, binding and placing in position

complete upto floor two level

BOQ Page No.2

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

19 Providing and fixing both sides polished machine cut 75.00 Sqm 617.60

kota stone shelves / partition of single piece (maximum

150 cm) 25 mm thick embedded into wall with groove in

cement mortar 1:2 (1 cement : 2 fine sand), including

racking and finishing smooth the surface, including

joined with grey cement, rubbing, cutting the stone as

and where required etc. completed.

20 Providing 15mm thick cement plaster in single coat on 834.00 Sqm 254.40

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement

slurry for Ground Floor

21 Providing 10 mm thick cement plaster in single coat on 258.00 Sqm 228.34

brick / concrete on ceilings and sofits of stairs for

interior plastering upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement

slurry Ground Floor

22 Providing 20mm thick cement plaster in single coat on 1014.00 Sqm 281.12

single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i)

Cement mortar 1:4 (1-cement:4-sand) including

finishing with a floating coat of neat cement slurry for

Ground Floor

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 391.80 Sqm 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade

24 Providing and laying Ceramic tiles 6mm thick in skrting 162.00 Sqm 1030.57

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry

25 Providing and laying Ceramic tiles 6mm thick in flooring 10.80 Sqm 997.16

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

26 Providing and fixing 18 mm thick mirror polished 91.20 Sqm 2202.08

Granite stone of machine cut & full round edge and

polished of approved quality in cladding on sill and

around the Doors / windows / ventilation with 20 mm

thick cement plaster 1:3 and jointed with white /

matching pigment cement slurry & adhesive, including

polishing & moulding of exposed edges etc. complete for

all floor level as directed by Engineer-in-charge.

BOQ Page No.3

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

27 Constructing a Sandwich type cooking platform of 60 cm 22.80 Sqm 5443.07

width and 70 cm height resting with Granite polished

stone top and 100 mm height faces in exposed faces with

18 mm thick of polished Granite stone of approved

colour and quality on 25 mm x 2 No polished Kota stone

sandwich supports, polished kota stone shelves and

fixing stone using cement mortar 1:2 (1 cement : 2 fine

sand) for sandwich and fitting at bottom & edges with

water proof rigid adhesives, including mocking

necessary grooves in walls, polishing and making edges

etc. complete as directed by Engineer-in-charge. (Only

top clear area of platform shall be measured and paid

28 Providing and fixing Stainless steel kitchen sink Glossy 6.00 No 1173.78

ASIS 304 grade and 1 mm thick with over all size 510 x

432 x 33 and bowl size 455 x 368 x 190 mm of approved

brand as directed by Engineer-in-charge with all fittings

like C.I. or M.S. brackets painted white / or fixing on

stone base, including cutting holes and making good the

same, 32 mm dia Brass waste and M.I. fisher union

fitting, including all necessary fittings etc. complete.

29 Providing and fixing standared extruded of alluminium 2.40 Sqm 1175.56

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/Rmt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

30 Providing and fixing extruded colour anodized 47.70 Sqm 3171.70

aluminium three track sliding window having

aluminium section having outer frame for bottom

member of size 92.00 x 31.75 x 1.30 mm size weight of

1.07 KG / Rmt and outer frame for top and sides

members size 92.00 x 31.75 x 1.50 mm size weight of

1.06 KG / Rmt, for shutters using top and bottom size

x 18 x 1.29 mm size weight 0.456 KG / Rmt & interlock

member size 40 x 18 x 1.29 mm size weight 0.456 KG /

Rmt & handle member size 40 x 18 x 1.29 mm size

weight 0.456 KG / Rmt with 5 mm thick transparent

bronze colour tinted float glass for shutter and fixing

wire net shutter of Stainless Steel wire of 304-grade of IS

Gauge designation 85-G with wire of 0-56 mm diameter

as a third sliding shutter with necessary fixtures and

fastening like rubber gasket and transparent silicon

sealant glass fixing to frame etc. complete as per

drawing and instruction of Engineer-in-charge.

BOQ Page No.4

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

31 Providing and fixing 35 mm thick shutter for door 36.60 Sqm 4116.87

having factory made solid core, melamine faced, three

layered resin flushed door of approved brand and

manufacture, with 1 mm thick decorative laminated

sheet on both side with 6 mm thick and 35 mm x 35 mm

specially shaped moulded teak wood beading fixed

around the door with necessary fixtures and fastenings

like S.S. butt hinges, S.S. Aldrop, S.S. Handle size 15 cm

long, stopper, door closers arrow type etc. complete as

per detail colour & pattern approved by Engineer-in-

32 Providing and fixing M.S. plain Grills (Safety Grill) / 3777.60 Kg 106.58

Shutter of required pattern to wooden frames of window

/ Door etc. with M.S. flats at required spacing and frame

all-round square or round bars with round handed bolts

and nuts or by screws, including primer coat of

approved quality and two coats of oil painting etc.

33 Applying two coats of putty & two coats of primer of 834.00 Sqm 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of 834.00 Sqm 82.85

approved brand and manufacture on undecorated wall

surface to give an even shade including thoroughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

35 Wall painting (two coats) with plastic emulsion paint of 258.00 Sqm 88.38

approved brand and manufacture on ceiling and sloping

roofs to give an even shade including thoroughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

36 Finishing wall with weather proof exterior emulsion 1014.00 Sqm 120.26

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered

materials etc. complete

BOQ Page No.5

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

37 Providing and laying water proofing treatment on 276.60 Sqm 1043.10

terrace with broken China mosaic tiles flooring over

average 40 mm C.C. 1:2:4 bedding for maintaining slope

for plain and curve surface & 12 mm to 20 mm of broken

piece of ceramic / glazed tiles (one for more colour as

directed) to be laid over cement mortar bedding of C. M.

1:3 (1 cement : 3 sand) contain one KG of water proofing

materials per bag of OPC at plain or / and slops and to

be tempered to bring mortar ceramic up to surface with

using white cement and colour pigment, including

rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any patterns or

design as per drawing and cleaning by using oxalic acid

etc. complete.

38 Providing and fixing water closet squatting pan (Indian 6.00 No 1458.05

type W.C. pan) size 580 mm (Including 'P' or 'S' trap,

foot rests and excluding earthwork, bed concrete)

Including providing and fixing 100 mm size “P” or “S”

trap for water closet squatting pan including jointing the

trap with the pan and soil in cement mortar 1:1 (1

cement : 1 coarse sand) including P & F in cement

mortar 1:3 (1 cement : 3 coarse sand) A pair of white

vitreous china 250 mm x 130 mm x 30 mm foot rest for

long pattern squatting pan water closet, including P & F

G.I. inlet connection for flush pipe with W.C. pan (A)

Vitreous china - (i) Long pattern-white colour.

39 Providing and fixing Wash basin with single hole for 6.00 No 2187.86

pillar tape with C.I. or M.S. brackets painted white

including cutting holes and making good the same but

excluding fittings. (A) vitreous china : (ii) Flat back wash

basin 550 mm x 400 mm size, (i) in white colour,

including fixing 32 mm dia C.P. Brass waste pipe, 32 mm

dia M. I. Fisher union, 15 mm dia stop tap and 15 mm dia

capstan head pillar tap, screw down high pressure with

screws shanks and back nuts & inlet & outlet

connections for wash basin etc. complete.

40 Providing erecting and fixing double coated ISI water 6000.00 Litre 3.95

tank of required capacity each with all necessary fittings

and connection etc. complete on terrace

41 Providing and fixing screw down bib taps of following 18.00 No 186.83

size.(B) Brass chromium plated screws down Bib Tap. (i)

42 Providing and fixing concealed Cock of premium make 6.00 No 808.00

with necessary other materials and piping connections

etc. complete as directed by Engineer-in-charge.

BOQ Page No.6

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

43 Providing and fixing Angle Cock of premium make with 12.00 No 606.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

44 Providing and fixing C.P. brass towel rail complete with 6.00 No 616.42

C.P. brass brackets fixed to wooden plugs with C.P. brass

screws.(B) 600mm x 20mm size.

45 Providing and fixing PVC SWR Nahni trap IS 14735 for 6.00 No 586.27

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and

making good the walls.

46 Providing and fixing 600mm x 450mm bevelled edge 6.00 No 859.41

mirror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden plug with

C.P. brass screws and washers.

47 Constructing brick masonry chamber for underground 6.00 No 3660.76

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

48 Providing and fixing S.W. gully trap with C.I. grating 12.00 No 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

49 Providing and Fixing PVC Spigot and Socket Soil waste 90.00 Rmt 280.23

and Ventilating Pipe of the following nominal size

50 Providing and Fixing P.V.C. Spigot and Socket Soil waste 60.00 Rmt 339.05

and Ventilating Pipe of the following nominal size

51 Providing and fixing M.S. fan clamps type 1 of 16 mm. 24.00 No 132.29

dia M.S. bar bent to shape with hooked ends to R.C.C.

slabs during laying including painting the exposed

portion of the loops all as per standard design complete.

BOQ Page No.7

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

52 Providing laying and jointing in true line and level 180.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

53 Providing laying and jointing in true line and level 120.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

54 Providing Sock well of inside Dimension 3.00 mt. Deep 6.00 No 43449.66

& 2.00 mt. Dia. Incl. Excavation, honey comb masonary

work in C.M. 1:6 incl. Covering the top with slab and

providing mainhole cover incl. Providing vatas and

curing etc. complete..

55 Constg Septic tank Including Excavation,B.B.C.C. 1:5:10, 6.00 No 24160.60

with brick masonarry wall in C;M 1:6 finished with

Cement plaster in C;M; 1:3 incl. partition with half brick

masonary.Etc complete.

56 Bala concept drawings on walls as per the instruction of 6.00 No 15150.00

Engineer in charge

57 Providing and fixing pre-cast Rubber Dye / steel Dye 88.20 Sqm 706.93

inter locking concrete block 60mm thick with grade of

concrete M-300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

58 Supplying and fixing slide, seesaw and swing combo set 6.00 Job 37875.00

as per the instruction of Engineer in charge.

59 Providing and Fixing SS 304 Foldable Checking bed 6.00 No 6060.00

having size 1.50 X 0.60 X 0.75 mm including using of

25mm dia pipe, SS 2mm thick, matter of 25.4 (1") of

density, cover with regine cloth of approved quality etc

completed as directed by Engineer incharge.

60 Providing and Placing IT wood writing table having size 6.00 No 15150.00

1.50 X 0.75 X 0.75 mt with one side drawer with using of

19mm thick WP wood, top cover with 1 mm thick wood

type Formica including using of all necessary material &

labour etc completed as directed by Engineer incharge

BOQ Page No.8

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

61 Providing and fixing Fabric cloth Curtain having length 60.00 Mtr. 858.50

1.8 mtr for covering of checking area including using of

alluminum sliding channel etc complete as directed by

Engineer incharge.

62 Providing and Fixing of SS 304 Hanger for bag including 120.00 No 252.50

using all necessary materials like SS rail, screw etc

completed as directed by Engineer Incharge.

63 Providing and Fixing pin cushion display board having 6.00 No 606.00

size 1.20 X 0.75 mt including using of alluminum section

frame, 18mm thick WB plywood, nevy blue Cushion

cloth pin etc completed as directed by Engineer

64 Providing and fixing PVC modular kitchen cabinet 15.00 Sqm 7575.00

consisting of base and wall units, made from high quality

rigid PVC boards (minimum 15–18 mm thick), including

shutters, shelves, drawers, SS hinges, telescopic

channels, handles, magnetic locks, necessary fittings,

cutting, fixing, complete as per design and direction of

Engineer-in-charge.

65 Providing and fixing foldable MS ladder having 0.90mt 300.00 Kg 110.77

wide & 3.60mt long including rod hinge arrangment at

middle with ladder including one coat of red oxide & two

coats of oil paint etc completed as directed by Engineer

66 Providing and fixing of hook of 10mm or 12mm dia 6.00 No 303.00

including drilling hole, fixing of male- female thrade

fastner sealing the same with appoxy compound,

finishing the same etc complete as directed by Engineer

67 Providing and fixing medical device & equipment 6.00 No 1414.00

standio meter height measuring scale 2.10mt long

including fixing in wall with using of all heavy SS screw,

rail etc complete as directed by Engineer incharge.

68 Providing and supplying standard PVC (Polyvinyl 12.00 No 1010.00

chloride) Chair with handle of approved design and

make as directed by Engineer incharge.

69 Providing and supplying standard PVC (Polyvinyl 12.00 No 606.00

chloride) Stool having size 3.75 X 0.60 X 0.45mtr of

approved make as directed by Engineer incharge.

70 Providing & fixing ABC type fire extinguisher 4 kg ISI 6.00 No 1515.00

marked complete

BOQ Page No.9

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

71 Point wiring for Light / Fan / Bell / Primary Point with 2- 60.00 Point. 299.97

1.5 Sq.mm & earth wire of 1.5 Sq.mm (green) both are of

ISI marked 1.1 kv grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall /ceiling, complete with 6A

Tissino Type ISI marked flush type switch / bell push

and accessories erected on Metal / PVC Box covered

with 3 mm thick PC (Polycarbonate) / Acrylic sheet with

necessary Lamp holder / ceiling rose / H.D. Connector as

directed. (c) with oval conduit /pvc casing capping

double lock type

72 Point wiring for independent PLUG with following size 36.00 Point. 336.33

mains earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in /flushed on wall/ceiling , complete with ISI

marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) / Acrylic

sheet. (h) with oval conduit /pvc casing capping double

73 Mains with ISI marked electrolyte stranded copper 300.00 Mtr. 66.66

conductor, Non PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire (HFFR)

conforms to IS-694, erected in existing pipe with 1.5sq.

mm copper conductor of same specifications for earth

continuity of following size. [i] 3 wire 1.5 sq.mm

74 Supplying & erecting earth pit of minimum bore 6.00 No's 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound

- 1 Nos Bag of 15 Kg.

75 Providing & Erecting following Shockproof tissino type 12.00 No's 31.31

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (1)

One no Single pole 6 A Switch / Bell push

76 Providing & Erecting following Shockproof tissino type 12.00 No's 47.47

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (3)

One no Single pole 16 A Switch

BOQ Page No.10

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

77 Providing & Erecting following Shockproof tissino type 12.00 No's 219.17

accessories erected on 3 mm thick PC (Polycarbonate)

sheet in PVC/ Metal Box. erected on wall/ ceiling. (14)

Electronic Hum free EME Socket Type Steps Fan

78 Providing & erecting Switch board for Computer or 12.00 No's 332.29

electric apparatus consisting of following items in single

board erected on PVC / Metal board with 3 mm thick

PC (Polycarbonate) / Acrylic sheet erected as directed

no. 6A/16A universal plug-switch combined. 4 nos. 6A

Switch 4 nos. 6A 5 pin Plug

79 Providing & erecting 240 V MCB double pole switch for 6.00 No's 330.27

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp. Cat.III

80 Providing and erecting Sheet Steel powder coated MCB 6.00 No's 702.96

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming

to IS 13032 and BS 5486-1986 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of

same company of MCB to be used) (A,a,iii)) Single phase

8 way single door

81 Supplying & erecting 5 stage single reverse osmosis 6.00 No's 15620.66

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post

carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected

as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

82 Supplying and erecting LED indoor fittings with LEDs of 18.00 No's 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

shown.)(A) Tube Light with integral driver (v) 36-40

Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll

BOQ Page No.11

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

83 Supplying and erecting led lamps with following wattage 24.00 No's 404.00

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (v) 21 to 30 watts Cat III

84 Providing and erecting Approved make Ceiling fan with 18.00 No's 1596.81

double ball bearing ISI mark with condenser A.C.

23OV.50 c/s.1200 mm. sweep complete, canopy erected

on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

85 Approved make ELCBs / RCCBs conforming to IS: 12640 6.00 No's 2636.10

and having sensitivity of 30 mA and Short Circuit

withstand capacity of 6 KA and suitable for operation on

single phase 240 V. having characteristic of quick action

& tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat-II

86 Providing & erecting open well type horizontal mono 6.00 No's 7934.56

block pump set with stainless steel body having

following specification (A) 0.5 H.P. single phase open

well motor pump set having discharge of 115 LPM @

mtr. head suitable for 32 mm dia. delivery pipe with

control panel Cat. II

87 Supplying & Erecting floor mounted/ table top single 6.00 No's 11557.43

phase 50Hz water dispenser with SS 304 food grade cold

tank specification having three water tap of

hot/cold/ambient water function, LED display with

storage capacity from 2.5 Ltrs to 3.2 Ltrs, cooling

capacity 2.5ltrs/hr, including refrigerant with 20ltrs

refrigerant storage capacity compartment inclusive

1No.water topping bottle

88 Supplying & Erecting of LED / QLED Full HD Smart 6.00 No's 15139.90

Google TV with 100% Color Volume Plus | 24W Dolby

Audio including having Google Assitant & other futures

with necessary connetion etc complete.

TOTAL =

I / We am / are willing to carry out the work at ________________________________ % above / below

percent (should be written in figure and words) of the estimated mentioned above. Amount of my / our

tender works out as under

Estimated amount put to Estimated amount put to

Tender Rs. __________________ Tender Rs. __________________

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

Net Rs. _______________________________ Total Rs. _________________________

In words ______________________________ In words ________________________

(* Please strike out whichever is not applicable)

BOQ Page No.12

Section-07

Description of Item

Item Rate in

(with brief specification and reference to Quantity Unit Amount

No Figures

book of specifications)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division

or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold

good for work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH /

102008 / 61 / C, Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain

any contractor representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division

KHAMBHAT ANAND.

BOQ Page No.13