WBPWD/AE/BESD/e-NIQ-21/25-26

SITC of LED iluimination sign board fabricated by 10' x 4' x 4" inch depth ACP box supported with 1"x 1" MS hollow square pipe of 18 swg all around. The 3 mm ACP facial should be provided with laser cutting 6 mm thick acrylic letters out of which 3 mm rising from the surface of the ACP board. 6 mm letters should be fixed on another 3 mm acrylic sheet on backside of the ACP facial. Border line of the front portion and back portion should be covered by 1.5" aluminium channel as per the direction of EIC. The sign board should be glow from back side of laters by 1.5w/2.0 LED 2/3/4 module cool white in colour including 12V 250W power supply and LED must be covered in box made of 3 mm thick sun board. 4 inch with part of the four side of board should be covered by ACP after bending excess part from front side. Back side of the boat should be covered with 22 swg aluminium sheet protect rainwater. The sign board should be fixed on existing position of the premises which should suitable supporting arrangement on wall and mending good damages as per direction of EIC.Color of ACP and letter will be as per direction of EIC. the cost of transportation and scaffolding charges are included. The sign board should be as per the following inscription as per direction of EIC- probably to be provided(I) National emblem (II) state logo etc beside these the probable( actual as per authority approval) size of the board (L)= 10' x (H)=4', 40 sq Ft

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. (H5/5)

Rest Supporting structure Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (H2/7B)

One coat of red lead/Zinc chromate priming

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

S & F 6 Watt decorative wall LED spot light. Make- Jaquar OWA-BLK-LWWL02R206W/ Surya/ Philips

Supplying150 Watt outdoor type LED light fitting. (Make: Crompton APLOMADO PRO, Cat. Ref.: CRP-418-72-57-HL2-GL-HR-NSR or equivelent make of Philips UrbanEdge Plus BRP504 LED72 CW R3C PSU S1/Benlo ultima cat no -BL18SL72W/ Jaquar OSL-GRY-LSRT015150W) with 5 years onsite warrenty.

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting. c3/19

Supplying of 1.1 KV grade 2 core 10 sq. mm XLPE/PVC insulated Al. armoured cable (Make: Havells/Gloster/Finolex/Mescab)

Laying of 2 core 10 sq. mm Al. armoured cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot dip) wire, making holes etc. as necessary, mending good damages and painting.

Supplying and fixing compression type gland for 2 core 10 sq. mm cable complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC Al armoured cables as below

Finishing the end of 2 core 10 sq. mm XLPE/PVC armoured cable by crimping method incl. supplying and fixing solderless socket (Make: Dowels), tapes, anticorrosive paste & jointing materials.

Supplying & fixing of 240 V time sensor switch consisting of the following accessories: A) 240 V, 40 A, DP MCB isolator of breaking capacity 10 KA & C characteristics - 01 no. (Make: L & T), B) 24 hour digital timer switch (Make: L & T) - 01 no., C) 240 V, 40 A, DP power contactor (Make: L & T) - 01 no., D) Auto manual toggle switch - 01 no., E) 240 V, 32 A, SP MCB of breaking capacity 10 KA & C characteristics (Make: L & T) - 01 no., F) LED indicator lamp - 01 no. red & 01 no. green in 2+10 way SPN MCB DB (Make: L & T, Enclosure: LTSD12N) incl. lock & key arrangement concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of Cu wire & provision for earthing attachment. (For outdoor light control)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (For WALL light separate point)