Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.0 L+₹72,719 (3.98%)Rejected-AOC 67 NIRANJANPUR SAHARANPUR ROAD PO MAJRA DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC L2 | |
| 3 | L3₹19.5 L+₹1.2 L (6.81%)Rejected-AOC A 16 SHIV LOK COLONY RAJPUR ROAD DEHRADUN 248 008 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248008 | L3 | Rejected-AOC L3 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 871 EWS
GE 871 EWS PIN 913871 C/o 56 APO
COMPREHENSIVE MAINTENANCE OF MISC E M SERVICES TO ELECTRIC NETWORK SYSTEM OF ZONE I AND II AT JOSHIMATH UNDER GE 871 EWS
2022_MES_567958_1
8704/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Joshimath
As per tender documents
8 documents required · 8 mandatory
₹500
GE 871 EWS
₹40,000
Yes
10 May 2023
8 Dec 2022
12 Jan 2023
8 Dec 2022
5 Jan 2023
22 Dec 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 mtr in depth for foundation (laying of under ground cables) in hard/dense soil and getting out all as directed.
Excavation in trenches not exceeding 1.5 m wide and exc 1.5 m but not exceeding 3.0 mtr in depth for foundation (laying of under ground cables) in hard/dense soil and getting out all as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 mtr in depth for foundation (laying of under ground cables) in hard rock and getting out all as directed.
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.
Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed.
M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.
M & L foundation for steel tubular poles of concrete 15 cm depth in bottom of Pit for bed concrete (1:4:8) Type D-2 using 40 mm graded aggregate for foundation of poles including necessary frame work and finishing the exposed surface even and smooth with out using extra cement complete all as specified and directed at site.
M & L Foundation for steel tubular poles of PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete including necessary frame work and finishing the exposed surface even and smooth with out using extra cement complete all as specified and directed at site.
M&L Coping for, steel tubular poles new and old (1:2:4) Type B-1 using 20 mm graded aggregate for coping of poles including necessary farm work and finishing the exposed surface even and smooth with out using extra cement complete all as specified and directed at site.
Supply, fix, jointing & testing of aerial bunched cable 1100 volt grade stranded and aluminium conductor 4 core x 70 Sqmm,(three phase and one neutral), 50 Sqmm (insulated messenger) , electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor including all fittings such as anchor clamp,suspension clamps,inline connector,cable protection and dead construction all as per IS, including taking down unserviceable cable complete all as specified & directed.
Supply, laying, jointing & testing in replacement of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 70 sqmm 3.5 core all as per IS complete all as specified & directed. Note: Excavation and earth work , cable protection of bricks and GI pipes shall be measured and paid separately.
Ditto- all as per Item No 12 here-in-before but of size 50 Sqmm 3.5 core.
Ditto- all as per Item No 12 here-in-before but of size 35 Sqmm 3.5 core.
Ditto- all as per Item No 12 here-in-before but of size 25 Sqmm 4 core .
Ditto- all as per Item No 12 here-in-before but of size 16 Sqmm 2 core .
Ditto- all as per Item No 12 here-in-before but of size 10 Sqmm 2 core .
Ditto- all as per Item No 12 here-in-before but of size 10 Sqmm 4 core.
Supply and fix in replacement of light grade Galvanised mild steel pipe 80mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection . (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule )
Ditto- all as per Item No 19 here-in-before but of size 50 mm bore
Ditto- all as per Item No 19 here-in-before but of size 40 mm bore
Supply and fix in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular of size of aluminum conductor 10 sq mm stranded conductor all as specified and directed.
Supply and fix in replacement, erecting of steel tubular poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) wide complete all as specified and directed. Make : India Co. Ltd Jamshedpur/Fabric(India) Pvt Ltd Meerut/National Tubing Co. Kanpur Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
M & L in replacement of ACSR conductor of size 6/1 x 2.59 (Weasel) and 6/1 x 2.11 (Squirrel) ISI marked for LT over head lines on poles including stretching, tightening of poles insulator with winding wire of suitable size with insulator/stretching of ACSR conductor all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of cradles, hexagonal/rectangular, fabricated with galvanised steel wire 4 mm dia as in repairs complete all as specified and directed.
Supply and fix in replacement of mild steel cross arms, bracings, supports, clamps, and back plates fabricated from structural steel sections as ordered including necessary nuts, bolts, washers , welding, bending, cold or hot , drilling holes for bolts , in any shape or size as indicated or directed with and including preparations of new steel surfaces & applying two coats of aluminium paint over one coat of red oxide Zn Chrome primer complete all as specified.
Supply and fix in replacement of Pin type insulator Porcelain, vitreous white/brown/green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 150mm height, 150mm dia for 1100 volt grade. Make : BHEL/BPCL/JAYSHREE
Supply and fix in replacement of Insulator shackle type porcelain vitreous, white brown or green 100mm height and 115 mm dia including one galvanized mild steel spindle, two galvanized washers and one galvanized iron nut for conductor working pressure 1100 volt grade complete.
Supply and fix in replacement of Loop insulator Porcelain, vitreous white/brown/green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, large size with overall dimensions 90mm x 140mm, clearance of hole 25.5 mm, Complete all as specified and directed.
M & L in replacement for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 40 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately. (Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost paid by Dept.)
M&L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and as directed
Lopping / prooning of tree branches upto the extend to obtain clearance all around the LT over head lines / HT over head lines conductor upto 3 mtr from furthest conductor on pole including removing of cut branches and cleaning of site complete all as directed. Note :- (a). The trees branches etc will be left as it is and will not be carried away by the contractor / DEL as the wood belongs to CEO / DEO and they will be responsible to lift the wood. (b). Prooning of all tree branches up to 6 inches girth in one tree shall be measured as one Job. (c). Contractor will employ sufficient labour to complete the job with in time as directed. (d). Contractor will be responsible for any type of mis-happening / accident while prooning the trees. (e). Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply . However full assistance will be provided by MES staff. (f). The contractor will provide proper tools and safety devices to his staff for prooning of trees.
Supply and fix in replacement of Mild steel work in framed work such as gates, grills, framed guard bars, gratings, ladders, MS clamp for supporting of cable etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work complete all as specified and directed
M & L for Re-stretching of loose over head ACSR conductor of any type/GI wire and repair of the broken conductors and adding new length( if required) in place of old and burnt conductor of any size on existing poles with proper sagging including winding with winding wire all as specified. ( Old conductor shall be reused where required for repairing broken length of conductor as directed by Engr-in-charge) . Note:- Five lines together will be measured as one span from pole to pole.
M & L for Painting to poles (9/11 mtr long) including cross arms, 'V' brackets, 'D' clamps, nuts, bolts, complete including painting with five strips of 30cm each black and white paint in alternate strips from the base of pole upto 1.5mtr height complete, spray painting with two coat of synthetic enamel paint of first quality silver paint over a coat of red oxide primer after and including complete removal of old paint by scratching, rubbing complete all as specified and directed
(a) Aluminium bus bar capacity 250 Amps for Phase-R-Y-B- 03 Nos & 200 Amps for neutral -1 No
(b) MCCB FP 36 KA 160 Amps- 1 Nos(I/C)
(c) MCCB FP 25 KA 63 Amps - 04 NosO/G
(d) MCB DP 10 KA 32 Amps - 06 Nos O/G
(g) complete control panel wiring with 25 Sqmm stranded copper conductor of suitable size along with one set indicator lamp for R,Y & B for each incoming and outgoing feeder
M & L for hardcore of gauge not exceeding 40 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed
Supply and fix in replacement of aluminum strip 25 x 3.15mm with saddles and fixing screws, insulators rowel plugs etc for conductor for roof and fixed on wall upto test point all as specified.
Supply and fix in replacement of galvanized iron strip 32 x 6 mm fixed with saddles & fixing screws, PVC dash fasteners, insulators fixed from test point to earth on walls or buried in ground /drawn into hume pipe. NOTE : Excavation & earth work shall be measured and paid for separately under relevant item of schedule. complete all as specified and directed.
Supply and fix in replacement of wooden block heavy weight of size 30x30x30 cm with hole of 20 cm for fixing of air termination rod of any size incl dismantling and taking down old existing unserviceable wooden block complete all as specified and directed.
Supply and fix in replacement of GI tubes light grade, galvanised, 20 mm bore including necessary GI fittings, laid in trenches or under floor or fixed with poles/walls for fixing of air termination incl dismantling and taking down old existing unserviceable GI tubes light grade complete all as specified and directed.
Supply and fix in replacement of five pointed air termination Aluminium rod 12mm dia, 300 mm long complete all as specified and directed.
Supply and fix in replacement of Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point completed all as specified.
Supply, fix in replacement, connecting and testing of MCCB 100 Amps and 25 KA 4 pole.
Supply, fix in replacement, connecting and testing of MCCB 63 Amps and 25 KA 4 pole.
Supply, fix in replacement, connecting and testing of MCCB 315/320 Amps and 36 KA 4 pole.
Supply, fix in replacement, connecting and testing of MCCB 250 Amps and 36 KA 4 pole.
Supply, fix in replacement, connecting and testing of MCCB 200 Amps and 36 KA 4 pole.
Supply, fix in replacement, connecting and testing of MCCB 160 Amps and 25 KA 4 pole.
Supply and fix in replacement cable separator heavy duty made of plastic with PVC clamps heavy duty three phase separator complete all as specified and directed.
Supply and fix in replacement cable separator heavy duty made of plastic with PVC clamps heavy duty two phase separator complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 10 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 16 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 25 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 35 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 50 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 70 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 95 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 120 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement cable lug suitable for 150 Sqmm cable with made of copper including nut, bolt and washer complete all as specified and directed.
Supply and fix in replacement HT tape roll 10 mtr long x 5 cm wide complete all as specified and directed. Make:Dowells/AXIS/INDIAN
Supply and fix in replacement junction box 450x450x200 mm with outgoing connectors per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and fix in replacement Anchor clamp suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and fix in replacement Suspension clamp suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and fix in replacement inline connector suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and fix in replacement cable protection suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed .Make:Sintex/Hansel/Legrand
Supply and fix in replacement dead construction suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and fix in replacement Junction sleeves suitable for 70 Sqmm to 95 Sqmm cable as per site requirement complete all as specified and directed. Make:Sintex/Hansel/Legrand
Supply and Replacement in repair of Stay assembly complete with accessories i.e stay plate 300mm x 300mm x 6mm, galvanized thimbles, G.I. stay wire 7/4 SWG, loop type insulators, vitreous porcelain, white brown or green of large size with overall dimensions 90mm x 140mm, clearance of hole 25.5mm, etc and all other accessories as shown in electrical plate No.1 on Ser Page No.19-47 of MES Schedule Part-I complete. Note : Stay clamp, excavation and earth work and concrete for stay pit and insulator shall be measured and paid for separately.
Repair of outdoor type LT panel board mounted on angle / PCC floor of size aprox 1.2X0.90X0.25 mtrs and replacement of unserviceable switch/control gears and connector, indicator lamps, panel door lock etc including rewiring and extension of incoming and out going cables by opening of loops/making joints with same size cable and provisioning of cable lugs /thimbles as reqd including replacement of rusted sheet metal with existing size MS sheets by necessary arc/gas welding / making cover as per suitable (Approx sheet 0.2 to 0.7 Sqmtrs ) and removing all dirt, dust etc with the help of air blower and painting complete Panel board with one coat of synthetic enamel spray painting over a coat of red oxide primer out side surfaces of Panel Board of approved colour including writing of identification etc all as specified and directed by Engineer-in-Charge comprising the following :- (a) MCCB 100 A to 400 A, 3/4 pole 415 Volt -04 to 06 Nos (b) Indicator Lamp RYB LED type with fuse.-01 set (c) Copper/aluminium bus bar RYB & N of 200 A size -01 set (d) Amp / Volt Meter 02 Nos (e) MCB TPN/SPN/SP mounting on bus bar -01 to 6 Nos (f) door lock - 4 to 10 Nos Note : (i) Necessary eqpt and safety measures, stasonary reqd for load balancing arranged by the contractor without any extra cost. (ii) Cost of New aluminium/Copper thimbles, earth and neutral link, insulator, hylem sheet, any type of screws,door locks any type as per site reqmt change under the job deemed to be included in the quoted rate. (iii) MCCB, MCB,copper/aluminium bus bar, indicator lamp, required for replacement shall be measured and paid sedately in relevant item.
M&L in replacement LED Type indicating Lamp for indication of RYB-01 Set Make L&T, Havells/ Standard.
M&L in replacement copper bus bar rating 200 Amps 25/3mm including making whole suitable for panel with tape insulation of suitable colour in Phase RYB & neutral in Black colour complete all as specified and as directed by Engr-in-Charge,
M&L in replacement aluminium bus bar rating 200 Amps 25/6 mm including making whole suitable for panel with tape insulation of suitable colour in Phase RYB & neutral in Black colour complete all as specified and as directed by Engr-in-Charge,
M & L for preparation of old painted surface of F/P box / LT Panel by removing all dirt, dust, etc and painting complete surface with one coat of synthetic enamel paint of approved colour over a coat of red oxide including writing of identification etc all as directed by Engineer-in-Charge
Supply and fix in replacement of out door type Busbar Chambers of size 80x80x70 cm (Feeder pillar box) fabricated by MS Sheet of size 3.14 mm gauge mounting on angle iron frame suitable for 415 Volts, 3 phase, 4 wire AC as specified and with and including aluminium bus bar of cap 400 amp installed on porcelain insulators. The Busbar Chambers shall be dust proof, vermin proof, and 40 x 40 x 6 mm angle iron frame work, front opening with locking arrangement duly painted with two coats of grey enamel paint over a coat of red oxide primer on the outside and two coats of red oxide primer in the inside complete all as specified and directed. (CPRI approved)
M&L for LT straight through joint kit for 95 Sqmm size.
M&L for LT straight through joint kit for 70 Sqmm size.
M&L for LT straight through joint kit for 50 Sqmm size.
M&L for LT straight through joint kit for 35 Sqmm size .
M&L for LT straight through joint kit for 25 Sqmm size.
Supplying and laying in replacement ,synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.
Bedi Refrigeration Works
Amit Engineering
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .