PROVN OF PATH WITH COVERED SHED AND TILING WK NEAR DSC BILLET AT LKT AT AF STN BHOWALI.

Amount

Contract Details

M&L Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 complete.

M&L 15 mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.

M&L for stone walling of random rubble stone masonary, uncoursed, well bounded, bedded & solidly hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed

M&L providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed

M&L flush pointing to RR stone masonary un coursed in cm (1:4) complete all as specified and directed.

M&L for loose filling with aggregate of gauge 40 to 80 mm to cover weep holes complete all specified & as directed.

M&L for low density polythylene pipes (LDPE) 50mm bore of pressure rating 6Kg/cm square laid in retaining wall.

Excavation in foundation, trenches nexc. 1.50m deep and nexc. 1.50m wide getting out in any type of soil, all as directed.

Returning, filling in spreading watering and well ramming in layer nexc. 25 cm in any type of soil all as directed.

Removing excavated soil to a distance exc. 1.5 K M and n.exc. 5.00 KM depositing where directed at a level nexc. 1.50 mtr above the starting point all as directed.

M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed.

M&L Cement concrete type B1 (1:2:4) (20 mm graded stone aggregate) in surface channels and drains etc complete.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching including necessary form work all as directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing newly plastered surfaces and applying two coats of cement base paint on walls all as specified and direcrted.

Excavating in post holes in hard dense soil each n exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed wwith earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed by Engineer in charge .

M&L for PCC(1:3:6) type C2, using 40 mm graded stone aggregates as in foundation, filling and mass cocrete complete all as specified and directed by Engineer in charge .

S&F tubular steel trusses including special shape washers etc. including for columns complete using ERW or induction butt welded tubes confirming to IS -1239 -1997 GRADE ST-240 complete all as specified and directed by Engineer in charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engr in charge.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; hold fasts, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Granite 18-20 mm Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

M&L Chequred cement concrete tiles 20cmx20cmx25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified.

M&L 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for Disconnecting existing water tanks of capacity 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) all complete all as specified and directed.

S&F bib tap 15 mm dia cast copper alloy CP with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F GI tubing 15 mm dia bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

BHUWAN SINGH ADHIKARI

om enterprises