Repairs/Renovation of S-9 Quarters at FACT Udyogamandal Township.

Repairs/Renovation of S-9 Quarters at FACT Udyogamandal Township

Dismantling & removing existing asbestos, aluminium or G.I. Roofing sheets with ridge from roofs at different levels and stacking the same, itemwise as directed at Township Civil Maintenance Office yard.

Dismantling, removing and lowering carefully planked sheeting, boarded floor, ceiling etc. and stacking materials in Carpentry Shop or Township office.

Demolishing and removing old cement plaster and disposal of the debris at places pointed out within a distance of 150M.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Hacking of CC flooring including cleaning the surface etc. complete as per direction of the Engineer-in-Charge.

Supplying and fixing AC corrugated or trafford sheets for roofing works with minimum end overlap of 150mm with necessary 8mm dia. G.I. Bolts, nuts & bitumen washers etc. complete at all levels..

Roofing / side cladding with AC or aluminium or GI sheet provided by the company with necessary 8mm dia GI bolts, nuts, washers, compound etc (Labour only).

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level..

RCC or CC work 1:2:4 mix, using 20mm nominal size broken stone excluding cost of form work and reinforcement .

Providing 3mm thick plain glass for glazing of shutters, partition etc. with teak wood fillet, putty etc. on new work / replacing of broken glass panes in existing shutters etc including dismantling the broken glasses,if any.

Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels.

Extra for finishing the surfaces neat with a flushing coat of cement over plastered surfaces.

Rendering skilled labour inclusive of all charges of labour and hire for tools required for executing skilled work at all levels with materials supplied from Company in connection with civil works as per the direction from the Engineer-in-charge in all shifts including Sundays and Holidays.

Rendering male coolie inclusive of all charges of labour and hire for tools required for cleaning drains, collecting and dumping unwanted materials in low lying areas as directed and transporting bricks, cement etc. from stores, lifting to various heights, mixing mortars and castables, providing scaffolding or any other works as per the instructions of the Engineer-in-charge in all shifts including Sundays and Holidays .

Supplying and fixing mosquito proof net using powder coated Aluminium frame with steel net (SS 316) to suit the existing window / Ventilator frames with suitable fixing arrangements as per instruction of Engineer- in -charge

Supplying & fixing false ceiling using 8 mm thk square edge laminated Gypsum celing tile of 595 x 595 mm, made of Gypsum plaster board as per IS 2095 part 1 & laminated with white 0.07 mm thk fire retardant PVC film on face side & 12 micron metalised polyester film inserted on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm, both side inclusive ) consisting of main "T" runner (minm 45 mm thk), spaced at 1200 mm c/c & cross "T" (minm 45mm thk) spaced betwen the main "T" at 600mm c/c to form a grid of 1200 x 600 mm & secondary cross "T" of length 600 mm to be interlocked at middle of 1200 x 600 mm panel to form grids of 600 x 600 mm and necessary cleats, dash fasteners, adjustable GI rods with butterfly level clips etc. Bottom exposed width of all "T" sections shall be pre-painted with polyester paint, complete at all heights as per instructions.

Supplying and fixing 110mm PVC floor trap of prime or equivalent 100mm SW gully trap for soil waste lines etc. including fixing with gratings.

Supplying best approved quality PVC Pipe Class II 110mm OD

Laying departmentally supplied 110mm dia SWR/PVC pipe with suitable necessary fittings, joints pasted, including clamping of pipes by providing necessary plugs, clamps, screws,etc. including grouting of plugs with CM 1:4, painting of clamps (2 coats) etc. complete for rain water and soil/waste line.

Supplying ,threading /laying and jointing PVC pipes conforming to IS 4985-1981 class IV(6kg/cm2) for internal water lines with all required pvc specials such as tees,bends, elbows, unions,reducers, etc.with clamps including cutting and making good the walls etc. complete - 50mm or nearest OD

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete -63mm or nearest OD .

Providing and fixing Chlorinated Polyvinyl Chloride SDR 11 pipes of Astral or equivalent, having thermal stability for hot & cold water supply, including all CPVC fittings, fixing the pipe with clamps at 1.00 m spacing, joining pipes & fittings with CPVC solvent cement, the cost of concealed work for cutting chases and making good the same, making good the walls, testing of joints etc complete as per direction of Engineer in Charge- 20mm dia

Supplying & fixing floor mounted Single piece WC (Hindware Flora 20107 starwhite or equivalent) with soft close seat cover, hinges, fixing accessories and accessories set , cistern fittings.

Supplying and fixing white glazed Orissa pattern W.C pan (HINDUSTAN or equivalent) of size 530x410mm with P/S trap including embedding the closet and trap in cement concrete, giving connection to the sewer line with all necessary specials, cutting and making good the walls and floors wherever required etc. complete as per direction at site.

Supplying Health Faucet Hindware / Cera

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms- 15 mm nominal bore.

Supplying and fixing Stainless Steel angular Stop cock with wall flange "CERA/ HINDWARE or equivalent type

Supplying and fixing Concealed Body for Single Lever High Flow Diverter with Button assembly, Cartridge Sleeve . But without exposed parts.(Jaquar model ALD-079)

Supplying and fixing Single Lever Exposed Parts Kit of High Flow Diverter consisting of Operating lever,wall Flange (With Seals) & Button only (Jaquar model FUS-29079K suitable for ALD-079).

Supplying and fixing Bathtub Spout with Wall Flange(Jaquar model SPJ-15429PM)

Supplying and fixing Over Head Shower with shower arm and wall falnge with chrome finish (Hindware or similar)

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :- 610x460 mm bowl depth 200 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing PTMT Soap dish holder having length of 138mm , breadth 102mm, height 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and applying wall putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Cleaning and applying priming coats with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour-Two coats

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour,One coat - of exterior grade.

Painting one coat with best approved quality red oxide metal primer after scraping and cleaning the surface at all heights of steel grills,bars,structures etc.

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:-One coat

Applying one coat best approved quality polyurethane clear wood finish one coat to doors, windows etc. after rubbing with sand paper and cleaning well the surfaces at all heights.

Floor Painting with water based floor paint of approved brand and manufacture of required colour to give an even shade- 2 coat

Providing and laying Double charge Vitrified tiles polished finish in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints of Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing and laying anti skid ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer) of approved make in all colours, shades and size, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment, cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels in approved size & pattern from approved manufacturer as directed by the Engineer in-charge for toilet wall and kitchen.

Pr+B19:B63oviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished Granite of any colour and shade, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab above 0.50 sqm

MUHAMMED HANEEFA PY