Repair of Rest house at Daroh Tehsil Palampur Distt. Kangra (HP)

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches including carriage of materials within all leads, lifts, and other incidentals as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with interior emulsion paint of Asian paint / Nerolac Suraksha Paint/ Berger paint / Dulux paint of approved shade for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty required for matting the surface including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ IS marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including clests angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing Coloured anodised aluminium shutter of door , window and ventilator including providing and fixing hinges /pivots and making provision for fixing of fitting whe ever required including the cost of PVC / neoprene gasket as required extrusion section of Jindal/ Hindalco as per approved shade aluminum work for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etc. aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleast angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing chromium plated brass soap dish of ESS/ Jal/ Jaguar with C.P. brass brackets fixed with cleats with C.P. brass screws complete in all respect within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP grating of ESS/JAL/Kingston for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaguar/ Hindustan with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass wall mounted kitchen sink mixture (Swan neck mixture) tap of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal/ Vintage series of Kerovite as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing plastic seat hollow type cover for wash down water closet with CP brass hinges and rubber buffers ( white plastic) including carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing casealed C.P. brass stop cock Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked ) fitting in all respect including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen millimetre) dia uplasticised PVC connection pipe with brass unions of approved brand and manufacture of 45cm length (Forty five centimetre) size, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PTMT/PVC jet sprey of continental series/clasic series/floral series of jaguar/ hindware/ cera for Europen seat of approved brand and manufacture, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen millimetre) PVC pipes for water supply including clamps at one meter spacing, cutting fixing and making good the wall etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x450 mm (three hundred into four hundred fifty millimetre) where as required Cremic Glazed tile of Kajaria/ Nitco/ Simpolo/ Somany/ Jonson/ Orient Bell with one border matching contrast at top laid over 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.