CERTAIN REPAIR TO BLDGS OF ASCON NODES OF 551 SUB GP AND ATTENDING DAY TO DAY MISC BR COMPLAINTS FOR OTM ACCN AND ADM OFFICES MESSES VIP BLDGS UNDER THE AREA OF AGE BRI ARMY CENTRAL IN ARMY AREA JODHPUR (9027/E8)

Amount

Note: (i) 80% of materials required for incorporation in the work will be supplied/ Deposited by the contractor into B/R store yard, which will be issued as the work proceeds. (ii) No payment will be allowed for "materials lying at site" under this contract only work done payment shall be allowed.

Repair of Bib taps, stop cocks, pillar taps,etc. of any type by replacing washer/spindle/jumper etc.

S&F Phase for 15mm bore brass or CP brass stop cocks, bib taps etc, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge

S&F Bib tap of PTMT, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.PARYAG CAT NO 121

S&F Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F Bib tap,cast copper alloy, 15mm bore, crutch or butterfly handlescrewed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified.

S&F Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete complete all as specified and as directed by the Engineer -In -Charge

S&F as in replacement of 15mm bore CP stop cock screwed down with iron pipe,

S&F 15mm bore Stop cock cast copper alloy, high pressure with crutch or butterfly handlescrewed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified

S&F 20mm bore Stop cock cast copper alloy, high pressure with crutch or butterfly handlescrewed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

Taking down or up steel / PVC tubing and connection including cleaning for refixing or removal to store 25 mm dia

All as per Item No 13 above but 20mm dia

All as per Item No 13 above but 15mm dia

S/F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified 25mm dia

All as per Item No 16 above but 20mm dia

All as per Item No 16 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Refixing only including cleaning the old tubing any grade to walls and ceiling or laying in floors including provision of new fittings by the contractor at his own, including cutting, screwing of 15mm dia :-( Note :- Old GI tubing obtained from replacement shall be reused )

All as per Item No 19 above but 20mm dia

M/L for replacement of 15 mm bore bib taps, two way chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule

M/L for replacement of brass chromium plated angle cock two way 15 mm dia screwed for iron pipe or brass ferrule,

M/L for replacement of 15 mm dia bore chromium plated wall mixer telephonic with ‘L’ shaped tubular bend set for O/H shower complete.

M/L for replacement of Bidet spray (Health faucet) with 1 meter PVC tube and holder

M/L for replacement of corner glass shelf 5 mm thick complete.

M/L for replacement of toilet paper holder chromium plated .

M/L for replacement of PVC bath cabinet box type with shutter complete as approved by the GE. Make :- Prayag/Polytuf

M/L for replacement of PTMT symet body towel rail 600mm long fixed to wall with chromium plated screws and wooden gutties ( Minimum weight 170 gms ) complete all as specified and as directed.

M/L for replacement of PVC jet spray with flexible pipe length not less than 1 meter fixed to EWC suitable for 15mm bore pipe

S&F Small fittings galvanized iron medium grade such as socket, elbow, nipple, Tee, Reducer sockets for 15mm bore pipe fixed in repairs complete all as specified and as directed by the Engineer -In -Charge. (Larger bore shall taken into account)

S&F Small fittings galvanized iron medium grade such as socket, elbow, nipple, Tee, Reducer sockets for 20 mm bore pipe fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.(Larger bore shall taken into account)

S&F Galvanized Iron medium grade fittings for 15mm bore Pipe, Union, Tank, Nipple fixed in repair complete all as specified and as directed by the Engineer -In -Charge

S&F Galvanized Iron medium grade reducer socket 25x15 mm ,fixed in repair Union, Tank, Nipple complete all as specified and as directed by the Engineer -In -Charge

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed in repair.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

All as per item No 36 above but refixing and repairing old.

S&F internal fittings complete including handle for PVC low level flushing cistern, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge. Make : CERA/COMMANDER

S&F Repair/Adjustment to washer /siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug and making it functional complete all as specified and as directed by the Engineer -In -Charge

S&F Ball valve of PVC for PVC low flushing cistern, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.

S&F PVC handle including lever for low level flushing cistern, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge

S&F PVC flush pipe 32 mm dia for low level flushing cistern, fixed in repairs complete. Including re fixing of cistern at its position complete all as specified and as directed by the Engineer -In -Charge.

S&F Mild Steel CP hinging device for plastic seat cover of EWC, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.

S&F PVC connections 15mm size with PTMT nuts of size 450mm

S&F PVC connections 15mm size with PTMT nuts of size 600mm

S&F Fixing in replacement English seat cover coloured pattern with flat bottom and cover mild steel hinging device complete

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing a

All as per item No 47 above but refixing and repairing old.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified.

S&F PTMT shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of PTMT as in repair complete all as specified.

S&F 125mm dia PTMT grating fixed over trap with white cement complete all as specified.

S&F replacement of jet pressure for EWC including PVC connection and CP stop cock 15mm .

S&F in repair 20mm dia mild steel PVC insulated curtain rod with fancy type knobs at both ends & brackets fixed with PVC rawl plug and steel screws.

S&F 0.56mm thick stainless steel plate rack of standard pattern & 31”x36” size including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.LOIN CAT NO 1301

S&F Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.

S&F Waste coupling of PTMT (half or full threaded) 40 mm bore (minimum weight 60 gms) fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.

S&F Waste coupling of PTMT 32 mm bore with waste pipe, for sink, fixed in repairs complete all as specified and as directed by the Engineer -In -Charge.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs.

M&L 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

Taking down and S&F white moulded polythylene water storage tank of 1000 Ltr capacity (cylindrical vertical with closed tap) hoisted and fixed in position all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks lid with clips, screws locking device complete for 300 ltrs/500 ltrs tanks capacity fixed in repair, complete all as specified and as directed by the Engineer -In -Charge.

Dismantling asbestos cement/PVC pipe including clamps complete all as specified.

PVC (SWR) pipes, double socketed, in any length with rubber ring joints, fixed to walls 110mm bore fixed in repairs , complete all as specified and as directed by the Engineer-In- Charge .

PVC (SWR) bends any radius, 110mm bore fixed in repairs, complete all as specified and as directed by the Engineer-In- Charge.

PVC (SWR) pipes, double socketed, in any length with rubber ring joints, fixed to walls 75mm bore fixed in repairs , complete all as specified and as directed by the Engineer-In- Charge .

PVC (SWR) bends any radius, 75mm bore fixed in repairs, complete all as specified and as directed by the Engineer-In- Charge.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F Cast iron soil, waste and vent pipe, 100mm dia, sand cast, in any length with or without ears jointed in cement mortar as in trenches/walls or under floor complete all as specified. (fitting measured separately).

All as per item 69 above hereinbefore but 75 mm bore.

S&F 100mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with cement joints complete all as specified.

All as per item No 71 above hereinbefore but 75mm bore.

Fixing only old cast iron bend of 100/75mm bore with cement joint complete all as specified.

S&F100mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

All as per item No 74 above hereinbefore but 75 mm bore.

S&F 100mm bore, cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

All as per item No 76 above hereinbefore but 75 mm bore.

S&F CI floor traps of dia 100mm with grating including all as specification in repairs complete all as specified & directed.

Demolition of stone masonry built in cement mortar

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6

All as per item No 80 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L for Flush pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete

M&L for 15mm thick rendering in CM 1:6 finished even and smooth on stone wall surface all as specified.

Demolition pcc flooring (un reinforeced) of any description and any position as in flooring plinth protection etc

M&L 50 mm thick PCC (1:3:6) type C1 usig 20mm gradde aggregate as in plinth protection finished complete including forming joints in 2 mtr intervals and filled with bitumen mastics all as directed.

Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc

S&F wire netting galvanised steel wirecloth 0.91 nominal dia and 12 mm mesh lathing and fixed to ceiling including all gaps cutting andwaste fixed with nails on ceiling complete all as specified and directed by engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer -In -Charge.

Material and Labour non skid coloured ceramic tiles 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:6 complete all as specified.

Material and Labour glazed coloured ceramic tiles 350 x450 x 7 mm /375x250x7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement complete all as specified and directed.

M&L for joint free non skid colour ceramic tiles of size joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including complete all as specified and directed.& all as specified.

M&L for colour ceramic tiles of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Item no 13 above but skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick as in floor over 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar.

M&L for 18- 20 mm thick Kota stone slabs as in skirting , risers of steps & other vertical surfaces etc including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25 mm thick sand cushion complete. The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 300 Kg/Cm2.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge..

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified. ®

Supply and fabricated of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening and fixing complete

Demolition of stone slabs laid dry jointed & pointed as in shelves etc sunshades

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 35-45mm complete

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash complete

M&L preperartion of newly plastered surfaces of wall and applying two coat of putty with fair finished and even surface and applying two coat of oil bound distemper complete(including applying sand paper for finished the surface)

Preparation of old surfaces by Brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, to wall including cornices etc plaster or un- plastered surfaces (old decorated surface) and applying one coat of white wash all as specified and as directed by the Engineer-in Charge.

All as per item No 111 above but on ceiling.

All as per item No 111 above but one coat of colour wash on walls.

Complete removal of existing treatment on wall and applying one coat of oil bound distemper over one coat of putty complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered or un- plastered surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying one coat of cement base paint (swocem) of approved quality & tint complete all as specified and directed.

Hacking out old broken glass of any description from wooden/metal frames and S&F 3mm thick sheet glass ordinaqry quality n.exc 0.5 sqm in each pane glazing with oil putty.

S&F Mild steel butt hinge, 100mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required in repair complete all as specified.

Mild steel butt hinge, 75mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required in repair complete all as specified.

M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples fixed in repair complete all as specified as in repair.

M&L only in repairs for galvanised mild steel wire cloth and including palin MS flat iron with galvanised wire stapples with and including necessary welding, nut bolt etc as in steel window or door complete all as specified and directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified.

S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

S&F as in replacement of handles of steel windws Z Section type

S&F as in replacement of peg steys of steel windows Z Section type

S&F replacement of hydraulic door closer cast iron body universal type suitable for door shutter.

S& F mild stel 2 levers mortice lock,vertical type, size 100 mm fixed in repairs and as directed by Engineer -In -Charge.

M&L 25mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter/shelves including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & French polishing to edging complete all as specified

M&L Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified.

S&F 150mm Mild steel helical door spring including roller and roller plate fixed in repair complete all as specified.

Welding at site in repairs exceeding 2.5cm but not exc 5cm in length and thickness of metal to be welded shall not ecx 6mm fixed in repair, complete all as specified and as directed by the Engineer-in-Charge.

Repair to steel window / door / gate including necessary welding, riveting, easing, drilling, including replacement of new hinging device, handles, and making them in serviceable condition including taking down and re-fixing in same opening and making good distrubded surfaces in CM 1:4 complete all as specified and directed.

Repair to aluminium window/door and replacement of unserviceable hinging device, handles, loose glass , rubber gusket, making them in serviceable condition including taking down and re-fixing in same opening complete all as specified as directed.( Note: Hydloric door closer, door spring,glass shall be measured and paid sapertely.)

Fixing only in repair powder coated aluminium door seal 30mm wide of suitable size including dust/insect arrestor complete all as specified and directed.as issued under Schedule 'B'all as specified and as directed.

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in- Charge for capacity exc 250 ltrs but n exc 500 ltrs

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in- Charge for capacity Exc 500 Ltrs but not exc 1000 Ltrs

Resecuring or easing and adjusting shutters of any description and in any position,n exc 1 Sqm each with taking down of sutters and refixing in same opening after necessary repair complete all as specified and directed.

All as per Item No 139 above but exc 1Sqm but not exc 2 Sqm each.

Taking down shutters of any description, area exc 1 sqm but not exc 2 Sqm each complete all as specified

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fast

All as per item No 142 above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

Taking down steel window/ventilator

S/F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with cooler opening, dovetailed or welded all as specified.

All as per item No 145 above but without glazing bars

All as per item No 145 above but as in ventilator top hanging shutter

All as per item No 145 above but as in ventilator top hanging shutter

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified.

S&F factory made solid PVC door, shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottoms rails, MS frame shall be covered with heat molded plain colour PVC 'C' channels having a PVC sheet strip of 20mm width stuck in side walls.Make Raj shree

Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing gla

M&L 35mm thick factory made plain,framed panelled shutters (Two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneering on bolt faces. The size of the rail and size as per IS 1003 (Part-I) kiln reasoned and chemical pressure treated.

Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified.

M & L for mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed complete.

Preparation of new/old wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

preparation of new/old steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified.

M&L rewriting or repainting of existing letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high complete all as specified and directed.

S &F in repairs of stainless steel butt hinges 100 mm size.

S/F of aluminium anodized,tower bolt 150 mm long

S&F alum anodised handle extruded section of size 150mm long

M &L for fabrication of pressed steel cupboard shutters using 0.63 mm thick MS plain sheet & with frame 0.80 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

S& Fixed in repairs 4 mm thick figured glass panes pin headed type complete all as specified and directed.

M&L for Anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by E in charge.

M&L for Anodised aluminium sections for shutters of doors, windows,ventilators , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/windows , hinges, al. door stopper, al. sliding door bolt with haps and staple ,Aanodised snap beading screws etc. complete all as specified. (Rubber beading shall be measured and paid seperately)

Dismantling of AC/ fiber glass ( corrugated , semicorrugated , etc ) sheet in roof covering.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts washer in roof , etc.

S&F for wind ties for roof incld securing bolts etc all complete

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs wall fixed with L or J type or cranked hook bolt etc complete all as specified including dismanlig of existing sheet .

S&F asbestos cement two piece adjustable plain wing ridge 6mm thk fixed with L or J type or cranked hook bolt etc complete all as specified

S&F CI floor trap in floors with grating including jionting to waste pipe of 100mm in cement concrete type B1 (1:2:4) fixed in repairs.

M&L for PCC solid block 10 cm thick type B1 1:2:4 set in cement mortar 1:6 complete all as specified and directed.

Dismantling of posts or struts ( wood ,steel or RCC) any section ,including taking out embedded in concrete portion and making good disturbed ground

'Excavation in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning filling in ramming earth arround layers n.exc 25 cm watering & removing surplus soil to a distance n.exc 50 mm & making good surfaces in loose /soft soil.

S/F MS angle iron as in fencing post/gate including fabrication for hole for fixing the nut and arrengement for fixing barbed wire.

S/F MS flat iron securing bolts posts and struts in fencing incl holes(for securing wire mesh etc) incl drilling bolting or revating complete all as specified and directed.

S/F mild steel bolts(machine made) with hexagonal or square heads at one ends each screw end to be filled with washers and one hexagonal nuts of 16 to 20 mm dia of shunk.

M/L cement concrete type C2(1:3:6) using 40 mm graded stone agg foundation filling as fixing of RCC fencing post incl form work if necessary all as specified & directed incl lean conc of gate pillars.

S&F MS mild steel 10 mm dia round bar cut to length incl straining & welding in horizontal bar for securing chain link fencing all as specified and directed.

Dismantling of old barbed wire complete.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining & fixing to any type of strandard rails straining bolts incl securing or tying at crossing with & provision of galvanised mild etc.

Dismantling of old chanin link fencing complete

'S&F chain link fencing complete all as specified all as specified and directed by engr-in-charge

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in hard dence soil.

All same as item No. 187 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately).

Supply and laying of RCC drain pipe 150 mm dia class NP-2 laid and jointed complete with collars.

Supply and laying of RCC drain pipe 200 mm dia class NP-2 laid and jointed complete with collars.

M&L for plain cement concrete 1:3:6 C2 using 40 mm graded crushed stone agg as in foundations filling and mass concrete.

Returning , filling in soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick all as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.