Repair/Maintenance/ Installation of New Pump Motor at all the Pump Houses at AGMC and GBP Hospital during the year 2026 - 2027

Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge. 63 AMPS

Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineerin- charge.

Supplying and fitting fixing of single phase motor startar panel unit 3.0 H.P. capacity comprising with 2 pole conductor, over load relay, capacitor, volt meter of BCH/L&T make with necessary copper wire etc. complete as per direction of Engineer-in-Charge.

Providing & fixing of Direct online (DOL) motor starter L & T/BCH make ( 3 phase, 50Hz,415V,10 HP/7.5 KW relay range within 13-21+10%) in steel sheet enclosure complete as per direction of the Engineer-in-charge

Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. i. 25 HP/18.5 kw Relay range within 13-21 + 10%

Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. (i) 2.5 Sqmm

Providing earthing with perforated 40 mm dia G.I. pipe (medim class) (12 mm dia perforation), laying of 4 mm dia G.I. wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with salt and charcoal / coke in alternate layers of 300 mm as per standard specification and direction of the Engineer-in-Charge. For 3 phase connection with 4.00 mtr long G.I. pipe.

Providing and fixing brass fullway valve (ISI Mark) with wheel of approved quality as per direction of the Engineer - in - charge. a) 40 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work)

a) 25 mm nominal bore.

b) 40 mm nominal bore.

Repair and maintenance of submerssible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. ii. 1.0 HP Motor suitable for 1000 GPH capacity submerssible pumpset

iv. 2.0 HP Motor suitable for 2000 GPH capacity submerssible pumpset

Repair and maintenance of 10 HP/ 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783- 1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.

Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. i. 0.5- 1.5 HP

iii. 3.0-5.0 HP

Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge.

Providing & installation of Mono Block Pumpset 3.7 K.W ,5 H.P. 16-18 Mtrs. head 3 phase horizontal motor suitable for 10.000 GPH capacity (Model : KDS-527) (Kirloskar / Crompton / KSB Duke / Lubi make) complete as per direction of the Engg-in-charge.

Providing & installation of Mono Block Pumpset 5.5 K.W ,7.5 H.P. 40-60 Mtrs. head 3 phase horizontal motor suitable for 10.000 GPH capacity water(Model : KDS-837) (Kirloskar / Crompton / KSB Duke / Lubi make) complete as per direction of the Engg-in-charge.

Supply & Fitting,Fixing of 3 HP submersible pump of 60 mtr head with motor of required capacity single phase including fitting fixing lower dia 42.00 mtr heavy duty GI pump assembly & Reducing socket,delivery bend 90 degree non return valve & fitting Etc.as per direction of engineer-in-charge

Cleaning and washing of chocked G.I. / PVC / CPVC / UPVC Pipeline 15 MM to 50 MM nominal bore using Water for jetting / blowback machine with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity having the option of diesel running vehicle mounting hydraulic operated including POL and operator, GI wire, Bamboo etc. after removing the pipeline from hooks and taking out the union joint, socket, elbow, tee and etc. & after which necessary fittings of pipeline with necessary fittings to complete the connection including the trial run for all height & depth etc. with all skilled & semi skilled labour complete as per direction of the Engineer- in-charge.

Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. External work

i) 40 mm dia nominal bore

ii) 50 mm dia nominal bore

Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall.

i) 25 mm dia nominal bore

ii) 40 mm dia nominal bore

Providing and fitting fixing of check valve (Vertical) in the saction pipe of under ground reservoire as per direction of the Engineer - in - charge. 3.11) 50 mm dia.

Cleaning and washing of underground water reservoir of size varying from 5.00 x 4.00 x 2.00 to 7.00 x 5.00 x 2.00 m manually with using 5 HP pump for emptying & filling water as per direction of Engineer - in - charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Repairing of 2 HP/3HP capacity submersible pump of different make in/c dismantling the old unserviceable pump & remaking the pump in good condition by providing necessary parts etc. complete as per direction of Engineer- in-charge.

Labour charge for lifting of 2 HP/3HP submersible pump with motor in/c column assembly by chain pulley block as per direction of the Engineer-in-charge.

Labour charge for lowering of 2 HP/3 HP submersible pump with motor in/c column assembly by chain pulley block as per direction of the Engineer-in-charge.

Labour charge for lifting of 20,000/15,000/10,000/7500/5000 GPH capacity water lubricated vertical submerssible pump-motor sets in/c column pipe assembly by heavy duty chain pully block as per direction of the Engineer-in-charge.

Labour charge for fitting fixing & lowering of 20,000/15,000/10,000/7500/5000 GPH capacity water lubricated vertical submerssible pump-motor sets in/c column pipe assembly by heavy duty chain pully block as per direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information