CA NO. CWE/HILLS/RKT/104 OF 2025-2026 REPAIR/ MAINT OF EXTERNAL WATER SUPPLY SYSTEM OF ENTIRE AREA OF RANIKHET UNDER GE RANIKHET

Amount

Excavation in trenches n.exc 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of pipes (where provided for protection of cables) and getting out trimming the sides forming bottom surface to required level in soft/loose soil complete all as spedified and as directed.

M&L cutting of existing road/hard standing// footpath surfaces for laying of GI water tubing complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in hard/dense soil in layers n.exc 25Cms in hard/dense soil complete all as specified & directed.

Removing excavated soil to a distance not exc 50M and depositing where directed at a level n.exc 1.5M above the starting point.

S/F GI water tubing medium grade, galvanised with all GI fittings (such as bends,elbows, tees, conectors, short pieces, back nuts, unions, caps & plugs etc)laid in trenches/on surface including cutting, threading and testing complete all as specified and directed of the following sizes:-

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Taking up or down existing rusted/unserviceable PVC tubing of any grade and S/F PP-R (Polypropylene random copolymer) 3 FRP/ thermal pipes. Pipes confirm to IS 15801: 2008 standards & fittings . working pressure for fittings is 25 Kgs/cm pes are in green colour. with all fittings (such as bends,elbows, tees, conectors, short pieces, back nuts, unions, caps & plugs etc)laid in trenches/on surface including cutttting, threading and testing complete all as specified and directed of size 20 mm bore

Taking up or down existing rusted/unserviceable GI tubing of any grade with all fittings and accessories from open surface, trenches,etc and stacking neatly for measurement and removing the same from site complete all as specified & directed of following sizes:-

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Taking up or down existing GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces,tanks including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required, including new GI fittings and accessories as required in new or old position including necessary excavation work complete all as specified and directed of the following size :-

150mm bore (Nominal bore)

100mm bore (Nominal bore)

80mm bore (Nominal bore)

50mm bore (Nominal bore)

40mm bore (Nominal bore)

25mm bore (Nominal bore)

Taking out old U/S gate valves for replacement including S&F of gun metal gate valve ISI marked class I with iron wheel head screwed both ends for iron pipe & fixed complete all as specified and directed at site of the following sizes :-

50mm bore

40mm bore

25 mm bore

20 mm bore

15 mm bore

Supply and fixing of GI union in repair/replacement of unserviceble of following size:-

50 mm bore

40 mm bore

25 mm Bore

20 mm bore

15 mm bore

Supply and fixing of GI socket in repair/replacement of unserviceble of following size:-

50 mm bore

40 mm bore

25 mm Bore

20 mm bore

15 mm bore

Supply and fixing of GI elbow in repair/replacement of unserviceble of following size:-

50 mm bore

40 mm bore

25 mm Bore

20 mm bore

15 mm bore

Supply and fixing of GI plug solid in repair/replacement of unserviceble of following size:-

GI Plug 15mm bore

GI Plug 20 mm bore

Supply and fixing of GI Tee in repair/replacement of unserviceble of following size:-

50 mm bore

40 mm bore

25 mm Bore

20 mm bore

15 mm bore

Taking out old U/S sluice valve for replacement including new sluice valve of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainlessnuts, bolts, washers & fibre/rubber gasket steel spindle including all accessories such as of following size :-

200 mm Size

150 mm size

100 mm size

80 mm size

Replacing the existing cast iron foot valve suitable for 80 mm bore pipe with new cast iron foot valve,gasket, nuts,bolt, washer etc complete all as directed by Engineer- in-Charge

Replacing the existing cast iron foot valve suitable for 100 mm bore pipe with new cast iron foot valve,gasket, nuts,bolt, washer etc complete all as directed by Engineer- in-Charge

Dismantling of old non return valve, supply &fixing cast iron non return valve of size 150 mm bore class-I PN-1.6 (ISI Marked) with both end flanged complete all as specified and as directed.

Dismantling of old non return valve, supply &fixing cast iron non return valve of size 100 mm bore class-I PN-1.6 (ISI Marked) with both end flanged complete all as specified and as directed.

Dismantling of old non return valve, supply &fixing cast iron non return valve of size 80 mm bore class-I PN-1.6 (ISI Marked) with both end flanged complete all as specified and as directed.

Supply oniy galvanised iron ISI marked heavy duty drilled flanged suitble for 80 mm bore pipe line complete all as specified and directed.

Supply only galvanised iron ISI marked heavy duty drilled flanged suitble for 100 mm bore pipe line complete all as specified and directed.

Supply only galvanised iron ISI marked heavy duty drilled flanged suitble for 150 mm bore pipe line complete all as specified and directed.

Supply only galvanised iron ISI marked heavy duty drilled flanged suitble for 200 mm bore pipe line complete all as specified and directed.

Supply only galvanised iron ISI marked heavy duty drilled end flanged suitble for 300 mm bore pipe line complete all as specified and directed.

Supply and fixing as in replacement push button suitable for 100 HP starter, Contractor MN-5 Complete all as specified and as directed Make- L & T

Supply only Impellar cast iron suitable for pump set 30 HP capacity

Supply only shaft sleeves DA and NDA suitable for pump set 30 HP capacity

Supply only Balancing ring cast iron suitable for pump set 30 HP capacity

Supply only Inlets stage casing bush CI suitable for pump set 30 HP capacity

Supply only stuffing box packing suitable for pump set 30 HP capacity

Supply only Impellar key steel suitable for pump set 30 HP capacity

Supply only balance disc cast iron suitable for pump set 30 HP capacity

Supply only split gland suitable for pump set 30 HP capacity

Supply only Rubber ring for pump stage packing suitable for pump set 30 HP capacity

Supply only Coupling ring suitable for pump set 30 HP capacity

Supply only Impellar cast iron suitable for pump set 30 HP capacity

Supply only shaft sleeves DA and NDA suitable for pump set 30 HP capacity

Supply only Balancing ring cast iron suitable for pump set 30 HP capacity

Supply only Inlets stage casing bush CI suitable for pump set 30 HP capacity

Supply only stuffing box packing suitable for pump set 30 HP capacity

Supply only Impellar key steel suitable for pump set 30 HP capacity

Supply only balance disc cast iron suitable for pump set 30 HP capacity

Supply only split gland suitable for pump set 30 HP capacity

Supply only Rubber ring for pump stage packing suitable for pump set 30 HP capacity

Supply only Coupling ring suitable for pump set 30 HP capacity

Dismantling existing U/S 100 HP capacity motor electrically and mechanically from foundation and transporting to Haldwani for rewinding with suitable size of copper enameled wire with all accessories including varnishing, testing, transporting back and refixing commissioning and testing complete all as specified and directed.

Dismantling existing U/S 30/50 HP capacity motor electrically and mechanically from foundation and transporting to Haldwani for rewinding with suitable size of copper enameled wire with all accessories including varnishing, testing, transporting back and refixing commissioning and testing complete all as specified and directed.

Supply only Impellar cast iron suitable for pump set 50 HP capacity

Supply only shaft sleeves DA and NDA suitable for pump set 50 HP capacity

Supply only Balancing ring cast iron suitable for pump set 50 HP capacity

Supply only Inlets stage casing bush CI suitable for pump set 50 HP capacity

Supply only stuffing box packing suitable for pump set 50 HP capacity

Supply only Impellar key steel suitable for pump set 50 HP capacity

Supply only balance disc cast iron suitable for pump set 50 HP capacity

Supply only split gland suitable for pump set 50 HP capacity

Supply only Rubber ring for pump stage packing suitable for pump set 50 HP capacity

Supply only Coupling ring suitable for pump set 50 HP capacity

Material and labour for servicing of electrically driven centrifugal pump set capable of delivering 15000 GPH at 210 mtr head capacity100 HP Motor - pump set including greasing , cleaning and replacement of water body kit seal cup, screw ring retainer, bearing , greasing of motor, nut bolt etc. complete all as specified by the Engr-in- charge.

S & F in replacement of bearing suitable for 30 HP motor as per existing make complete all as specified.

S & F in replacement of bearing suitable for 100 HP motor as per existing make complete all as specified.

Supply and fixing of PVC Flexible pipe 25 mm dia as in delivery of suction sweeper motor of pressure rating 3 kg/sq cm complete all as directed by Engr-in-Charge.

S&F Mild steel, plain, black sheet of 1.6 mm thick in hearths, covering to water tanks; water troughs; ducts; urinal troughs and funnels, valve pit etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as directed. (Note : One endshould be properly hinged and another end should be locking arrangement.)

Supply only shaft sleeves DA and NDA for pump set 10 HP capacity.

Supply only stuffing box for pump set 10 HP capacity.

Supply only stuffing box packing for pump set 10 HP capacity.

Complete B maintenance check of generator set 125 KVA, SM No 219/1530/DG/14 by cleaning , checking and adjusting of aneroid oil, throttle linkage, fuel tank breather, crankcase breather, air piping, oil bath air cleaner tray screen and belt including replacing of engine oil, full flow oil fillter , by pass filter air compressor breather element, fuel filter primary and secondary, leanin of radator, hose pipe set and fan balt etc all as specified and directed by the Engr-in-charge. Make:- Kirloskar (Jhuladevi)

Complete B maintenance check of generator set 82.5 KVA by cleaning , checking and adjusting of aneroid oil, throttle linkage, fuel tank breather, crankcase breather, air piping, oil bath air cleaner tray screen and belt including replacing of engine oil, full flow oil fillter , by pass filter air compressor breather element, fuel filter primary and secondary, cleanin of radator, hose pipe set and fan balt etc all as specified and directed by the Engr-in-charge. Engine make Rustan & Alternator make Crompton Greaves(Jhuladevi)

Complete cleaning of masonry water storage reservoir of 8 lacs gallons capacity at Jhula Devi from inside, extraction of all dust/sand/mud/algee deposits, making it free from algee growth by scrapping with brush, washing with water cleaning of all MS/lron/wooden frame work inside and roof of the reservoir & general cleanliness of the outside surface/area surrounding of the tank including drains etc, Applying two coats of lime wash on all plastered internal surface (excluding floor) of the tank & two coats of approved make & shade of snowcem on all sides of the outside of the tank including necessary painting by white synthetic enamel paint on external surface of tank over black paint of size 2.5 fit x 1.5 fit including marking of tank capacity and date etc of cleaning. The entire Job is to be carried out all as specified and directed

All as per item No 41 here in before but for 3 lacs gallons capacity at Ram Mandir

All as per item No 41 here in before but for 5 lacs gallons capacity at Jhula Devi.

All as per item No 41 here in before but for 1 lacs gallons capacity at Ghingarikhal

All as per item No 41 here in before but for 3 lacs gallons (Two compartment of 1.5 lacs glns each) capacity at Half Moon.

All as per item No 41 here in before but for 1 lacs gallons (Two compartment of 60,000 & 40,000 glns) at Kampoor (Adm top).

All as per item No 41 here in before but for 40,000 glns capacity clear water reservoir at upper Kaligadhera.

All as per item No 41 here in before but for 10,000 gallons capacity reservoir at Dulikhet.

All as per item No. 41 here in before but for 15,000 glns capacity clear water reservoir at Machkali Reoni Pump House

Complete cleaning 7000 gallons of RCC over head tank at Dulikhet area on 15M staging from inside, extraction of dust/mud/silt/Algee deposits making it free from algee growth by scrapping with brush, & washing with water including general cleanliness of outside. Surfaces/surrounding area including applying two coats of lime washing on all the internal surfaces of the tank & two coats of snowcem of approved colour on all external surfaces including staging paint of size 2.5' x 1.5' including marking of tank capacity and date of cleaning complete all as specified and directed.

Complete cleaning & welding of pressed steel/iron water storage tank from inside, extraction of all mud/sand/dust/Algee deposits making it free from algee growth by scrapping & washing with water & painting with one coat of black bitumeneous paint all the MS items fitted insideand one coat of red oxide primer on outer surface of tank including general cleanliness of outer area/surroundin, drain and making of tank capacity and date of cleaning etc complete all as specified & as directed for the following capacity :-

18,000 gallons capacity PS tank located at Dulikhet.

18,000 gallons capacity PS tank located at Machkali

18,000 gallons capacity PS tank located at Kumpur (Adm Top)

18,000 gallons capacity PS tank located at MES IB

19,000 gallons capacity PS tank located at Half Moon

M & L for painting with two coat of synthetic enamelled paint of approved shade over a coat of red oxide primer on external surfaces of motor and pumps after complete removal of existing paint and preparation of surfaces including writing SM/MES Nos etc. complete all as specified and as directed.

Repair/ Replacement of pressure pump of 1 HP, single phase , 230 volt, 50 Hz, 2800 rpm, head 25 mtr discharge 30 lpm , size 25 x 25 mm, with pressure tank as per manufacture instructions complete all as specified and directed. Make : Jyoti/Crompton greaves or equivalent approved.

Supply in replacement water testing kit free chlorine & PH test with coloured ample with all testing fitments and OT solution packed in Rexene finished wooded box complete as directed and as approved by Engnr-in-Charge. Make RMCO or equivalent make as approved by GE

Supply in replacement digital water TDS testing kit complete as directed and as approved by Engnr-in-Charge.

M & L for Water testing solution O-TOLODINE bottle 500 ML complete as directed and as approved by Engnr-in-Charge.

Supply only of nylon brush assembely 600 mm long suitable for Trolley type suction sweeper cap 5 HP (Make Crompton Greeves).

Cleaning of valve pit chambers, removing algae, silt, sludge accumulated at bottom of valve pit chambers up to the entire satisfaction of Engineer in Charge.

Supply and fixing in replacement MU-G DOL starter suitable for 7.5 HP motor MU-G10 DOL , relay max range 9-14 Amp complete all as specified and directed. Make L &T cat part No MU-G10 DOL, HSN code 8536 or equivalent cat part in Havells/Crompton Greeves/Siemens

M & L for brick masonary valve pit chamber of size 1200x1200x1200mm (internal sizes) with MS sheet cover 3 mm thick and angle iron frame of size 50 x 50 x 3 mm with locking arrangement with pad lock having triplicate key duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete including excavation in any type of soil, returning, filling in and removing surplus excavated material not exceeding 50 mtrs, all as specified brick work and all inner sides of pit and exposed portion of out side shall be plastered in cement mortor (1:4) with PCC 1:4:8 150mm thick in foundation and PCC 1:2:4 100mm thick minimum in bottom of pit for drainage complete all as specified and directed.

Supply only compressed abestos Fibre jointing Sheet/ Gasket 4 mm thick conforming to physical property as per IS 2712:1998 for fixing in between flanges for jointing two pipelines complete all as specified and directed.

Supply only compressed abestos Fibre jointing Sheet/ Gasket 6 mm thick conforming to physical property as per IS 2712:1998 for fixing in between flanges for jointing two pipelines complete all as specified and directed.

Supply only compressed abestos Fibre jointing Sheet/ Gasket 8 mm thick conforming to physical property as per IS 2712:1998 for fixing in between flanges for jointing two pipelines complete all as specified and directed.

Supply only compressed abestos Fibre jointing Sheet/ Gasket 10 mm thick conforming to physical property as per IS 2712:1998 for fixing in between flanges for jointing two pipelines complete all as specified and directed.

Supply & Fix in replacement for ELECTRIC SHOCK CHART (Electric shock & its management chart) of standard size 70x50 cm drawn on wooden/ cardboard frame of approved size complete all as specified and directed.

S&F MS Angle size 50x50x5mm and flat iron 30x5mm for valve pit cover repair/structure including necessary cutting, welding, drilling etc as per existing valve pit size all as directed by Engr-in-Charge

S&F Mild steel, plain, black sheet of 1 mm thick in hearths, covering to water tanks; water troughs; ducts; urinal troughs and funnels, valve pit etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as directed. (Note : One end should be properly hinged and another end should be locking arrangement.)

Servicing / maintenance including repairs but excluding spares as required for following components of complete altoch Dosing system installed at GE(MES) Ranikhet including following operations. (a) Dismantling of altoch Dosing System complete part by part in MES yard/ workshop, cleaning of all the stationary and rotary parts and display the parts at site for inspection of Engr-in-Charge to ascertain the serviceability / unserviceability of plant and to ascertain the quantam of defects and repairs involved. (b) Transporting the defective parts to authorised dealer for repairs as decided by the Engnr-in-Charge and carrying out the needful repairs including replacement of defective unserviceable parts. (c) Assembling the altoch Dosing System after repair/service and carrying out necessary test in presence of Engnr-in-Charge to establish functionability of the repaired plant upto the entire satisfaction of Engnr-in-Charge. Note:- (i) Maintenance / servicing of each altoch Dosing System shall be measured and paid maximum once in every month. However, in case of unserviceability of the same, the contractor shall be required to carry out the job for its maintenance any number of times as required and directed at site as a case of emergency breakdown. (ii) Any parts required to be replaced during repair / servicing of altoch Dosing System shall be measured and paid for separately under relevant item of this schedule. (iii) Any minor parts required to make plant serviceable even if notified by the Engr-in-Charge shall be supplied by the firm without any extra cost to the department.

Supply only # 7 pump head ( Ferrules 1/4" & Declibac included). Make- Declibac. Cat No- UCPH7FD.

Supply only 7 pump tube ( One pack of 5). Make- Declibac. Cat No- MCCP207B

Supply only Injection check valve ( One pack of 5). Make- Declibac. Cat No- MCINJ38.

Supply only Weighted suction line strainer 3/8 ". Make- Declibac. Cat No-ST138.

Supply only 3/8 " white suction / discharge tubing. Make- Declibac. Cat No- MALT002.

Supply only Nut, bolts and washers off Size as per sample.

Collecting samples of under ground sump water from Jhula Devi pump house(Raw Water And Treated water) for Bacteriological testing and complete Chemical testing for parameters as specified.(for each quarter ending) Note : The bacteriological and chemical testing of water shall be carried out in Govt authorised laboratory . The item cost includes collecting of samples of water from UG sump and Pump house site and charges of Govt authorised laboratory for carrying out testing of water sample.

Supply and Replacement of Door Hinges (Male & Female) suitable for 125 KVA DG Sets all as directed

M& L for framed bracket of angles cut to shape for making stand and ladder cut to shape drilled and counter sunk for screw including bending and welding angles as necessary (angle size 75x75x6mm & 35x35x6mm reveting confirming to FE 410-W (Gde-250) (Brackets over 10 Kg each to be measured under structural steel) complete all as specified and directed.

M & L for expanded metal weight not exc 4 Kg /sqm, cut to length, bend to shape as reuired and tying with and including mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples and fixed completed to wood or steel members complete all as specified and directed by Engr-in-charge

Taking out old U/S Water level indicator and supply and fixing FRP scale conventional / Mechanical water level indicator complete with float, wire, float guide pipe , bracket & pulley, counter weight, indicator pin, etc. including all accessories for water storage reservoir complete all as directed.

M&L for rendering 15 mm thick readymade plaster on inner/outer walls with Ultra Tech READIPLAST or equivalent in JSW Enduroplast/ACC Suraksha ready use plaster, by adding 17-19% of potable water by weight of material or as per manufacturers instructions, for thickness above 15mm, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days, 10-12 Mpa/Bulk density 1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, complete all as specified and directed.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 190-0 or Fe-165-0.

S&F Pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Prem singh kuwarbi and co (BID ID -3482311)

madhur buildtech (BID ID -3485219)

M/S BHATT ENTERPRISES (BID ID -3491751)

NK CONSTRUCTION (BID ID -3486345)