Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Quoted L1 | |
| 2 | L2₹37.0 L+₹1.2 L (3.30%)Rejected-AOC | L2 | Rejected-AOC Quoted L2 |
Tender Value
₹43.4 L
EMD Value
₹86,780
Closing Date
23 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Chandigarh
GE AF Chandigarh
IMPROVEMENT TO OMQS AND SMQS AT AF STATION KASAULI
2023_MES_620496_1
GE(AF)/CHD/T-35/2023-24
Open Tender
Civil Works
Item Rate
183 days
Kasauli
All as per NIT and Tender documents
10 documents required · 10 mandatory
₹500
GE AF Chandigarh
₹86,780
Yes
12 Dec 2023
25 Sept 2023
30 Oct 2023
25 Sept 2023
23 Oct 2023
9 Oct 2023
25 Sept 2023 - 3 Oct 2023
Amount
M&L for Non skid joint free ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) and including dismantling old floor tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises and out of defense land complete all as specified and directed.
M&L glazed ceramic coloured/ printed tiles 450mm x 350mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:3) including necessary cutting as per site requirement complete and including dismantling old wall tiling, removing serviceable tiles to store and rubbish off the premises and out of defense land all as specified and directed.
Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges flat for rough finished surface complete all as specified and directed.
M&L mild steel TMT bars 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
M&L for RCC (1:1½:3) type A-1 using graded stone aggregate as chajja, fins, louvers, roof projection, beam and lintel after removing of loose concrete including preparation of surface by application of de-rusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/ distribution bars by inserting to adequate depth in beam by drilling, priming reinforcement bar old/ new with a coat of anti corrosive Nitozinc primer of M/s FOSROC in and including demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for., removal of excavated material n exc 50 mtr and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. Notes: 1. Quoted rate shall be deemed to include for necessary scaffolding etc. as required for height upto 8.00 metre. 2. Reinforcement will be measured and paid separately. 3. Nitozinc primer will be paid separately.
M&L for applying anti-corrosive primer, Nitozinc of M/s FOSROC or equivalent as approved by GE to old de-rusted reinforcement bars in chajjas complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:3) on concrete surface as in chajja, ceiling etc. finished even and smooth without using extra cement including application of two coats of cement base paint complete all as specified and directed. Note: Quoted rate shall be deemed to include for necessary scaffolding etc. as required for 8.00 metre height.
M&L for 5mm thick floating coat in cement mortar (1:4) finished even and smooth using WPC @ 3% by weight of cement over and including 10mm thick backing coat in cement mortar (1:4) on brick or concrete surfaces in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed. Note: Supply only of WPC will be measured and paid separately.
M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed.
M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement cement complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of oil bond distemper over a coat of primer complete all as specified & directed.
M&L for preparation of new surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed. Notes: (i) Pattern of camouflage if any shall be as approved by GE (if any). (ii) Rate quoted by contractor shall be deemed to include the cost of use and waste of necessary ladder, wooden platform etc. as may be required to execute work at any height upto 8.00m.
M&L for preparation of old plastered surfaces of walls including brooming down, washing, rubbing down using sand paper, stopping disturbed surfaces, planes/edges with white cement putty & rubbing with sand paper to obtain regular and smooth surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed. Notes: (i) Pattern of camouflage if any shall be as approved by GE (if any). (ii) Rate quoted by contractor shall be deemed to include the cost of use and waste of necessary ladder, wooden platform etc. as may be required to execute work at any height upto 8.00m.
M&L for brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) in and including demolition of brick masonry built in cement mortar including all quions, arches, pillars etc. complete all as specified and directed.
S&F bands, straps, supports or stays for rainwater; ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; handmade sliding bolts; clamps; holdfasts; wall ties; hooks for hanging fans; plain angle cleats for securing purling to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290. Gde E-165 quality provided at 10m height complete all as specified and directed.
S&F 0.80mm thick plain galvanised, mild steel sheeting, in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S&F 100mm dia nozzle pieces (outlets) with gutter, thickness of 1.00mm thick mild steel sheet complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe including taking down old unserviceable CI/PVC pipe and fitting etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified.
S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, or for sewer line etc pipe including taking down old unserviceable CI/PVC pipe and fitting etc complete all as specified and directed.
S&F 75mm bore PVC(SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor or fixed to wall including all fittings, heads, shoes, bends, swan necks, etc including taking down old unserviceable CI/PVC pipe and fitting etc complete all as specified and directed.
S&F PVC (SWR) reducers complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description along with fittings exc. 1.50 Sqm but n. exc. 4.00 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description along with fittings n. exc. 1.50 Sqm each complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sections as in frame for doors, windows and ventilators (minimum weight not less than 1.20 kg/ RM) with one or more rebates including necessary joining cleats for fixing etc. complete all as specified and directed.
Supply, fabrication and fixing aluminium windows, triple track fabricated with powder coated aluminium sections with three sliding shutters (02 No. glass shutters and 01 No. wire gauzed shutter) with following sections including joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required complete all as directed:- [a] Top and side members for three track frame shall be of size 92.00mm x 31.75mm x 1.5mm. [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00mm x 31.75mm x 1.5mm. [c] Top and bottom rail of sliding shutter shall be of size 40mm x 18mm x 1.55mm. [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40mm x 18mm x 1.55mm. [e] Sliding shutter to be provided with 5.5mm thick tinted glass (Tinted glass to be measured and paid for separately). [f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and width of aperture 1.4mm (Wire cloth to be measured and paid for separately).
Supply, fabrication and fixing aluminium windows, four track fabricated with powder coated aluminium sections with four sliding shutters (03 No. glass shutters and 01 No. glazed shutter) with following sections including joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required complete all as directed:- [a] Top and side members for three track frame shall be of size 92.00mm x 31.75mm x 1.5mm. [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00mm x 31.75mm x 1.5mm. [c] Top and bottom rail of sliding shutter shall be of size 40mm x 18mm x 1.55mm. [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40mm x 18mm x 1.55mm. [e] Sliding shutter to be provided with 5.5mm thick tinted glass (Tinted glass to be measured and paid for separately). [f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and width of aperture 1.4mm (Wire cloth to be measured and paid for separately).
S&F aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bar; aluminium section weighing not less than 2.2 KG/ RM including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm Long (2 Nos), suitable handle (1 No) to each shutter complete all as specified and directed.
S&F plain tinted glass 5.5mm thick fixed in aluminium frame as in windows/ ventilators complete all as specified and directed.
S&F 5.5mm thick figured glass, pin head type fixed in aluminium frame as in windows/ ventilators, complete all as specified and directed.
S&F, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and as directed.
S&F aluminium grills powder coated of standard pattern as per drawing No CE A/F/STD/144/02 dated 17.10.2002 fixed to aluminium frames including aluminium fillet to cover the edges around complete all as specified and as directed.
M&L 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws as in ceilings in and including dismantling of ceiling boards(fibre pulp, insulation, etc)or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed
M&L dismantling ceiling boards(fibre pulp, insulation, etc)or insulation boards/slabs/blankets any thickness, including cover fillets & refixing the old serviceable Asbestos cement plain building boards, fixed to timber framework with screws as in ceilings complete all as specified and as directed
S&F second class hard wood plain fillets square, rectangular or triangular in section of sectional area exceeding 13 & not exceeding 25 sqcm, clean sawn, wrought finished secured with screws complete all as specified and directed.
M&L for 600mm x 600mm x 6mm thick ‘E’ board classic (Make- Everest Industries Ltd) as in false ceiling including supply and fixing GI ‘Tee’, grid framework made of special section of MS galvanized sheet 0.30mm thick, bottom portion painted with cellular nitro painting, wrapping the suspending wire around the existing wooden/ steel purlins/ rafter for suspending grid framework of size 605mm x 605mm suspended with 4mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mm x 24mm x 0.60mm, cross runner tee 37mm x 24mm x 0.60mm and perimeter angle of 24mm x 24mm x 0.50mm thick; Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion including dismantling ceiling boards(fibre pulp, insulation, etc)or insulation boards/slabs/blankets any thickness, including cover fillets and snap grid complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling old corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling old plain steel sheeting of any thickness as in roof coverings complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F rolled mild steel sections as in posts, main and cross beams, hip and jack rafters; purlins, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to Fe-410W (Gde E-250) complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed.
M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc. comprising the following complete all as specified and directed:- (a) Applying neat cement slurry @ 1.3 Kg/ Sqm of surface including wire brushing, cleaning, washing and preparing floor & sides of walls. (b) 15mm thick plaster in cement mortar (1:3) mixed with integral water proofing compound on floor and wall and finishing the surface even and fair. (c) Applying first layer of cement slurry @ 0.488 Kg/ Sqm mixed with and including Acrylic based polymer modified cementations composite compound @ 0.253 Kg/ Sqm after the rendering has set and dried up. (d) Applying second layer of cement slurry @ 0.242 Kg/ Sqm mixed with Acrylic based polymer modified cementations composite compound @ 0.126 Kg/ Sqm after 4 hours of application of first layer of cement slurry. This layer will be allowed to air dry for 4 hours followed by water curing for 48 hrs. Note: Supply only water proofing compound shall be measured and paid separately.
M&L for PCC (1:5:10) type E-2 using brick aggregate as in sunken portion complete all as specified and directed.
Supply only integral water proofing compound.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) with plastic water closed seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. complete all as specified and directed.
S&F in repairs chromium plated steel jet pressure unit alongwith suitable size and of appropriate length PVC pressure pipe, fixed to EWC/ IWC complete all as specified and directed.
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 using graded stone aggregate as in sub floor for laying floor tiles complete all as specified and directed.
S&F 40mm dia medium grade GI pipe as in spout for sunken floor; fixed as in wall with inside end fixed with wire netting and external bevelled edge at 45⁰ complete all as specified and directed.
M&L for 75mm thick plain cement concrete (1:3:6) type C-1 using graded stone aggregate as in plinth protection including finishing the surface even and smooth without using extra cement including demolition of cement concrete (un-reinforced) in ground floors and paving n.exc. 15cm thickness (below or above ground level) and removing debris out of MoD land complete all as specified and directed.
Disconnecting of geyser carefully and re fixing the same including all necessary fittings complete all as specified and directed.
Supply and fixing/ hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top) 500 litre capacity ‘double layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug including dismantling existing tank complete all as specified and directed.
S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed/ fixed on walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.
S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed/ fixed on walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.
Taking up or down the existing GI water tubing 15mm bore medium grade and re-fixing in same or other location using new fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. complete all as specified and directed.
M&L for point wiring complete with multi stranded copper conductor cable of size 1.5 sqmm PVC insulated unsheathed FRLS colour coded 1100 volts grade drawn in and including medium grade non metallic rigid PVC conduit 19mm dia or higher fixed on surface/ concealed with all standard fittings such as Tee junction, bends, on existing sunken terminal boxes and new 3mm thick PVC laminated hylam sheet for mounting switch/ sockets etc. including PVC insulated un-shearthed 1.5 sqmm multi-stranded copper conductor cable FRLS colour code cable 1100 volts grade for earth continuity for One ceiling fan/exhaust fan point controlled by one switch one way complete all as specified and directed:-
S&F switch piano type, flush type, single pole, one way, 6 Amps complete all as specified and directed.
S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals, complete all as specified and directed.
S&F and testing of Ventilation Fan , AC singe phase 230 V of size 200 mm sweep with , complete all as specified and directed.
M&L for Cutting of hole for fixing Ventilation fan complete and making good disturbed surface all as specified and directed.
Sachdeva Builders
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .