Supply Erection and Commissioning of Kitchen Equipment s to SV Balamandiram TTD Tirupati

Supply of SS Two Burner Gas Stoves of size 48" x 24" x 21" Height with the following Technical specifications: Top cut out AISI 304 quality 10 g thick press foldersections forming.Top cut out portion 16" x 1" - 2 nos. of cast iron rings.Center 5/8 raised all 4 sides 2" + 5/8 down folder SS 1 ¼" x 1 ¼" x 5mm thick of AISI 304 grade angles. Both bottom and top frame including both rear sides in between 4 legs. 1 ¼" OD - 16 guage thick pipe legs with ¾" SS nut and adjustable bullet legs. In between 4 legs 1" OD AISI 304 quality - 16guage thick pipe welded at 6" Height for (Gasconnection). Front side 18 guage - 4 step panel of 9"height other 3 side, the panel should be fitted with10 guage thick of SS bolt and nuts.18G step pannel 9" height panel with air vent louvers panel should be fitted with 10 guage thick of SSbrackets and SS bolt and nuts.2 Nos. 22 guage SS drip tray with folded handles.To provide T-35 United make LPG burners - I no in each grid in adjustable 304 grade frame and burner clamp in cut of portion. To provide necessary needle control valves left and right adopters.

To provide 1.5' feet copper pig tails with United make. To provide flexible pipes from existing gas pipeline to the stove. The supplier responsible to test the stove at the time of installation. The rate is exclusive of GST and including cost and conveyance of machine and its accessories to the work site.(Excluding GST)

Supply, fixing and commissioning of Vegetable cutting machine of capacity 200 Kgs per hour with the capacity of motor 0.50 HP and supplying 12 types of blades for cutting, slicing, mincing, grating and chopping in different sizes will be provided. (Excluding GST) Note :Motor make: Suguna/Cropton/texmo/Kirloskhar

Supply, erection and commissioning of standard type Wet Grinders 20 Liters Capacity with the following specification: Stainless steel body of wet grinder with black stone. The drum and body made of 20 gauge SS304 grade sheet with 3 phase suitable electrical motor Make: Crompton / Suguna/Texmo / Kirloskar Motor with suitable LT/LK starter. The gear box mounted on cast iron/MS base plate with gear box system with stoppers and top stone holding in and direct drive. Stopper rod made of SS304 grade including Coconut scrapper. Note:- *The rate is Excluding GST and including transportation, loading unloading, connection accessories, etc., to the work site. *All the materials/process/manufacture shall be as per relevant ISI codes where ever applicable.

"Supply, erection and commissioning of Tilting grinders of 10 liters capacity with the following specification. Capacity : 10 liters Stainless steel tilting drum with S.S Legs fitted on a base box having a heavy duty gear driven motor. The drum and body made of 20 gauge SS 304 grade sheet with 3 phase suitable electrical motor make: Crompton/ Suguna/ any ISI motor with suitable L & T starter. Stopper rod made of SS 304 grade. Make: Suguna / Lakshmi/ Sowbhagya / Crompton / Trident. Note: The rate is inclusive of all taxes and excluding GST"

Supply of SS Rice Collection/Transport Trolley- Overall Size 47½" x 32¾" x 24"+Handle (Double jacketed rice trolleys) Inner tank: 44½" x 29¾" x 11¾" with 1½" flared +½" down folded on four sides. Outer tank: 47 ½" x 32 ¾" x13 ¼". Inner and outer: Both made out of AISI 304 quality 2 mm thick S.S sheet with 4 corners well radioused welded grinded and neatly polished. Bottom side 2 Nos. S.S 10 g supports for wheel welded. 4 Nos of 8" castor wheels -2 fixed -2 swivel type with S.S plate and S.S bolt nut with lock washer and spring washers. S.S supports between inner & outer vessel.1¼" Pipe made handle welded with stuff end washer. The S.S. sheet of 16 gauge AISI 304 grade inclusive of all duties, transportation, insurance etc., complete (304 grade test certificates should be furnished by the contractor) but excluding GST.

Supply of PLAT FORM TROLLEYS having approximate load carrying capacity of 1 ton to work site and the rate is inclusive of all duties, Transportation etc., and excluding GST , complete F.O.R at Tirupati with the following specification: PLAT FORM TROLLEY size 36" X 48" 10" + 30" Height, 36" X 48" Top platform made out of AISI quality 10G thick SS 304 grade with all 4 sides 2" + 5/8" down folded with 4 corners well radiused welded and finished neatly–polished. ⅝" + 1 ¾"+2"+1¾" +⅝" - 10G SS Channel support 2 nos in width side and 2 supports length side between (by this SS Channel support the SS 304 grade plat form get stiffened and with stand loading of any weight up to 1 ton) 2 fixed and 2 swivel. 1" X ¼" SS 304 grade flat with holes 2+2, i.e., 4X4=16 nos. welded to fix castor wheels 6" x 2" fitted using 1" X 3/8" SS bolt nut washer - lock washer 16 sets. On top 48" side 1" OD - 14G thick SS 304 grade Pipe arch welded with top platform using stiffened washers. On 36" side 1 1/2" OD - 14G thick SS 304 grade Pipe made arch handle welded with top using stiffened washers (Excluding GST).

Supply, fixing and commissioning of Vegetable peeler machine of capacity 25 to 30kgs per batch, the capacity of 1Hp motor of ISI make and drum made with 304 grade stainless steel house in M.S. Angle frame, bottom with the circular in impeller pasted with abrasive stone chips and firmly fixing the inlet and out let water pipe connections etc., The rate is exclusive of GST, cost and conveyance of machine and its accessories F.O.R at Tirupati.(EXCLUDING GST)

Supply, erection and commissioning of Flour Mill with 12" Plates with '100 Kgs/hour capacity without motor and starter etc., as approved by the Department complete. (Excluding GST)

Supply and fixing of 10 HP Motor with Kirloskar Make and RPM 1440 to the Flour Mill Machine with all electrical connections ( Excluding GST )

Supply and fixing of 10 HP Starter (Star Delta) with board etc., of LT/LK make to the Flour Mill Machine with all electrical connections. (Excluding GST) ;

Supply and fixing of Vee Pulley and Vee belt to the Flour Mill.(Excluding GST)

Supply and fixing of DOSA STOVE size:96" x 30" x 32" +6 The unit fabrication top MS plate 25 mm thickness. Legs 50 mm x 2 mm SS square pipe. 3 side cover 16 SWG S.S. Sheet with V type burner 4 feet length 4. nos. with 3/8 NCV 4 nos. 3 feet copper tube 4 nos front glass wool copper insulation with adjustable nylon pipe. Gas material (united brand) S.S. sheet (304 grade) (EXCLUDING GST).