SPL REPAIR TO ROAD FROM BLDG NO. P-342 J TO BLDG NO. 298 1 AND P-318 TO BLDG NO. P-300 AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 02 JODHPUR

Amount

M & L for repair to potholes any depth, n.exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by Engineer-in-Charge.

M & L for Premix bituminous macadam with 4% binder content by weight of total mix, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen any penitration complete all as specified and directed by Engineer-in-Charge.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bitumenous primer using paving bitumen VG -10 @ 5Kg /10 sqm complete all as specified and directed by Engineer-in-Charge.

M & L for Bituminousin semi-dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content (bitumen of agrade VG-40) by weight of total mix, laid by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed by Engineer-in-Charge.

M & L for providing and laying 2 to 2.5 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed by Engineer-in-Charge.

M&L for factory made precast cement concrete solid blocks M-25 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size , laid in position to the required line, level and curvature, set and jointed in cement mortar 1:3 including marking joints with or without grooves (thickness of joints except at sharp curves shall not be more than 5mm) for path edgings etc.; embedded in position including demolition of existing precast PCC blocks and making drainage opening where required and all necessary excavation, tamping ground around blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new or previously untreated concrete surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint (ordinary tint) over a coat of priming paint complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc., including necessary form work complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed by Engineer-in-Charge.

S&F in repair Road safety polycarbonate convex traffic mirror 80cm dia, encased in ABS materials, highly visible orange colour/visor for outdoor type, weather proof, brackets with horizontal and vertical angle adjustment fixed in and including 2.10m high and 75mm dia GI pipe as stand, fixed in ground with 60cm x60cm x75 cm PCC block with cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete all as specified and directed by Engineer-in-Charge.

S&F metal tubular delineator made out of ABS round body fitted with 2 Nos of 65mm dia highly reflective reflectors made of PMMA and mounted on 45/50mm dia MS Pipe medium weight of 600mm height, duly powdered coated and thermoplastic elastomer 3 bands of green, red and yellow reflector, radium tape of 25mm wide strips with anti theft metal net for reflector protection, including embedded in PCC 1:2:4, type B1 using 20mm graded stone aggregate foundation of size 150 x 150 x 300mm complete all as specified and directed by Engineer-in-Charge.

D DEV COMPANY (BID ID -3257531)

New Vishvakarma Udhyog (BID ID -3262877)