REPAIR / REPLACEMENT OF WATER PUMP MOTOR, CI / GI PIPE LINE OF VARIOUS SITES, HORIZONTAL / VERTICAL RAISING EQUIPMENTS, CHLORINE DOSER, MOTOR PUMP, PIPE LINE AT AF STATION IZATNAGAR, BAREILLY.

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for taking out and laying of water supply mains and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Taking out existing unserviceable, broken, damaged cast iron non return valve from its existing position and Supply, installation, commissioning and testing of new non return valve of following sizes of cast iron body, class-I, both ends flanged complete all as specified and directed: -

(a) 150 mm bore size.

(b) 100 mm bore size.

Taking up cast iron water mains (including all fittings) with spigot and socketed ends and lead joints including burning out joints complete all as specified and directed for the following sizes: -

(a) CI pipe of 200 mm bore.

(b) CI pipe of 150 mm bore.

(c) CI pipe of 100 mm bore.

Supply and laying of cast iron pipe with flanged ends, centrifugally cast, class-A, in any length, laid in trenches or fixed on pillars and the like complete all as specified and directed.

(a) CI pipe of 200 mm bore.

(b) CI pipe of 150 mm bore.

(c) CI pipe of 100 mm bore.

Supply and laying of cast iron pipe with spigot and socket ends, centrifugally cast, class LA, suitable for lead joints, in any length, laid in trenches or fixed on pillars and the like complete all as specified and directed.

(a) CI pipe of 150 mm bore.

(b) CI pipe of 100 mm bore.

S & F of cast iron fittings such as bend (any type, radius and angle) tapper any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, single branch, ‘Y’ junction, double branch, cross collar, caps and plugs suitable for cast iron pipe any dia and type complete all as specified and directed.

S & F as in replacement mild steel nut-bolts and washer of suitable size as directed complete all as specified and directed.

M & L for taking out defective sewage pumping set centrifugal type of any make and of following capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil work shop for cleaning, scraping, painting, machine repair work and necessary over hauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re- assembling, installation, commissioning and testing complete all as specified and directed: - NOTE: - Spare parts of pump as replaced and rewinding of defective motor shall be measured and paid separately under respective items of this schedule.

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

M & L for rewinding of defective squirrel cage induction motor set with super enamelled copper wire of same gauge as per existing of any make and following capacity by dismantling from existing pump set and disconnecting from electric panel and transporting the same to civil workshop including dismantling, checking, removal of burnt out winding including re-assembling, installation, commissioning and testing complete all as specified and directed: -

(a) 25 HP capacity motor.

(b) 12.50 HP capacity motor.

(c) 5 HP capacity motor.

Supply and fixing in replacement pump shaft suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement guide spinder alongwith bush suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement gland bush suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement gland box suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement cast iron impeller suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement coupling set suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement roller bearing suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement ball bearing suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

Supply and fixing in replacement star rubber suitable for existing centrifugal pump set of following capacity complete all as specified and directed: -

(a) 25 HP capacity centrifugal pump.

(b) 12.50 HP capacity centrifugal pump.

(c) 5 HP capacity centrifugal pump.

M & L for taking out defective submersible pumping set of any make and of following capacity from bore well ( 60 Metres deep) connected with 7/6 stage column pipe and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of faults or defects, repaired thereafter pump motor set, re- assemble the same, transported back to original location after repair / replacement of all faulty or defective parts to make the pump serviceable and installed completely at the pump house including necessary electrical and water connections, testing and commissioning complete all as specified and directed: - NOTE: - Spare parts of pump as replaced and rewinding of defective motor shall be measured and paid separately under respective items of this schedule.

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

M & L for taking out defective submersible pumping set of any make and 0.50 to 2 HP capacity from bore well (30 Metres deep) connected with 3 stage column pipe and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of faults or defects, repaired thereafter pump motor set, re- assemble the same, transported back to original location after repair / replacement of all faulty or defective parts to make the pump serviceable and installed completely at the pump house including necessary electrical and water connections, testing and commissioning complete all as specified and directed. NOTE: - Spare parts of pump as replaced and rewinding of defective motor shall be measured and paid separately under respective items of this schedule.

Supply and fixing in replacement gun metal impeller suitable for existing submersible pump set of following capacity complete all as specified and directed: -

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

(d) 0.50 to 2 HP capacity submersible pumping set.

Supply and fixing in replacement coupling sleev suitable for existing submersible pump set of following capacity complete all as specified and directed: -

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

(d) 0.50 to 2 HP capacity submersible pumping set.

Supply and fixing in replacement mild steel stud suitable for existing submersible pump set of following capacity complete all as specified and directed: -

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

(d) 0.50 to 2 HP capacity submersible pumping set.

Supply and fixing in replacement ball bearing suitable for existing submersible pump set of following capacity complete all as specified and directed: -

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

(d) 0.50 to 2 HP capacity submersible pumping set.

Supply and fixing in replacement gun metal neck ring suitable for existing submersible pump set of following capacity complete all as specified and directed: -

(a) 41 HP capacity submersible pumping set.

(b) 25 HP capacity submersible pumping set.

(c) 15 or 10 HP capacity submersible pumping set.

(d) 0.50 to 2 HP capacity submersible pumping set.

M & L for rewinding with super enamelled copper wire of same gauge as per existing of the motor of submersible pumping set of any make and following capacity by dismantling from existing pump set and disconnecting from electric panel and transporting the same to civil workshop including dismantling, checking, removal of burnt out winding including re-assembling, installation, commissioning and testing complete all as specified and directed: -

(a) 41 HP capacity motor.

(b) 25 HP capacity motor.

(c) 15 or 10 HP capacity motor.

(d) 0.50 or 2 HP capacity motor.

M & L for taking out defective monobloc pumping set type of 0.50 or 3 HP capacity and any make by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil work shop for cleaning scraping, painting, machine repair work and necessary over hauling, replacement of worn out and defective parts including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re- assembling, installation, commissioning and testing complete all as specified and directed. NOTE: - Spare parts as replaced shall be measured and paid separately under respective items of this schedule.

M & L for rewinding of defective monobloc motor set of any make and of capacity 3 HP with super enamelled copper wire of same gauge as per existing including dismantling, checking, removal of burnt out winding including re-assembling, installation, commissioning and testing complete all as specified and directed.

M & L for rewinding of defective monobloc motor set of any make and of capacity 0.50 HP with super enamelled copper wire of same gauge as per existing including dismantling, checking, removal of burnt out winding including re-assembling, installation, commissioning and testing complete all as specified and directed.

Supply only orthotodoline solution in 500 ml packing complete all as specified.

Supply only pig lead as per sample complete all as specified.

Supply only spun yarn as per sample complete all as specified.

M & L for complete servicing of Altoch based chlorination plant any make to make the same functional including replacement of all defective / unserviceable spare parts and commissioning and testing of the plant after re-assembling the same complete all as specified and directed. NOTE: - Spare parts as replaced shall be measured and paid separately under respective items of this schedule as 'Supply Only'.

Supply only following spare parts of altoch based chlorination plant complete all as specified: -

Rotor assembly with bearing, bracket and tolerance rings.

Coil 250 volts 50 Hz.

Roller assembly.

Pump tube.

Injection check valve 3/8".

Weighted suction line strainer 3/8".

White suction / discharge tubing of size 3/8".

Check valve duckill.

Connecting nut 3/8".

Connecting nut 3/8" with adapter.

PVC dosing head assembly with suction, delivery adopter and NRV of capacity 25 LPS.

PVC NRV set with glass ball for suction and delivery adopter.

PVC adopter for suction and delivery without NRV.

PVC stainer washer type heavy duty of Y type stainer for sunction.

Teflon gland square type 3 mm.

Chemical oil seal with cap.

Dosing agitator gear box 25 LPS.

Plunger assembly without dosing head complete.

Plunger assembly with dosing head complete.

Ferrule 1/4".

Chlorine test kit with coloured ample complete with all testing fitmen and OT solution in rexine box.

PVC NRV suitable for decrin dosing pump as per sample.

Collection of water sample of treated water from Sewage treatment plant (STP) for testing of physical, bactereological and chemical analysis of the same from the Govt. Approved Authorized labs as directed by GE complete all as specified and directed.

Supply only as in replacement 16 Sqmm 3 core submersible copper cable flat type complete all as specified and directed.

Supply only as in replacement 10 Sqmm 3 core submersible copper cable flat type complete all as specified and directed.

Supply only as in replacement 6 Sqmm 3 core submersible copper cable flat type complete all as specified and directed.

Supply only as in replacement 2.50 Sqmm 3 core submersible copper cable flat type complete all as specified and directed.

Supply only bleaching powder confirming to IS-1065 in airtight polythene bags of capacity 25 Kg Each complete all as specified and directed.

Cleaning of sewage sump including STP, septic tank of any size and any depth in any situation mechanically or by any other suitable means and removing the sludge, mud, silt and the like including cleaning the sides and berms of sewage sump or septic tank and removing the same outside of defence land complete all as specified and directed. NOTE: - The contractor shall take all necessary precautionay measures and provide equipments to the workmen as required and applicable for such working conditions.

Supply and fixing as in replacement MCCB (fixed type) 415 volts, 4 pole, 30 KA, 63 Ampere capacity complete all as specified and directed.

Supply and fixing as in replacement MCCB (fixed type) 415 volts, 4 pole, 30 KA, 125 Ampere capacity complete all as specified and directed.

Supply and fixing as in replacement MCCB (fixed type) 415 volts, 4 pole, 36 KA, 160 Ampere capacity complete all as specified and directed.

Supply and fixing as in replacement MCCB (fixed type) 415 volts, 4 pole, 36 KA, 200 Ampere capacity complete all as specified and directed.

S & F as in replacement fully automatic star delta starter suitable for 45 HP, 415 volts, 3 phase, 50 Hz duly built in sheet metal enclouser alongwith over load protector complete all as specified and directed.

S & F as in replacement fully automatic star delta starter suitable for 25 HP, 415 volts, 3 phase, 50 Hz duly built in sheet metal enclouser alongwith over load protector complete all as specified and directed.

S & F as in replacement fully automatic star delta starter suitable for 12.50 HP, 415 volts, 3 phase, 50 Hz duly built in sheet metal enclouser alongwith over load protector complete all as specified and directed.

S & F as in replacement fully automatic star delta starter suitable for 2 HP, 415 volts, 3 phase, 50 Hz duly built in sheet metal enclouser alongwith over load protector complete all as specified and directed.

Supply and fixing as in replacement contactor three pole MNX 70 including coil 230 volts capacity complete all as specified and directed.

Supply and fixing as in replacement contactor three pole MNX 50 including coil 230 volts capacity complete all as specified and directed.

Supply and fixing as in replacement spare kit without coil for contactor type MNX 70 as per Cat. Part No. CS 94151 of C&S or having same specifications in Havells or Crompton complete all as specified and directed.

Supply and fixing as in replacement electronic timer type ET-100,110 / 240 volts, 50 Hz complete all as specified and directed.

Supply and fixing as in replacement overload relay 6 to 10 Ampere, 3 pole directly operated type complete all as specified and directed.

Supply and fixing of push button unit suitable for star delta starter as per Cat. Part No. SS90004 of L&T / Siemens make as approved by GE with and including taking down old unserviceable one complete all as specified and directed.

Supply, fixing and testing as in replacement single phase preventer 415 volts, AC, 50 Hz, with and including replacement of internal copper wire connections of suitable size for starter complete all as specified and directed.

M & L for run lead joint suitable for cast iron pipe spigot and socketed joint including lead, cocking spun yarn etc. complete all as specified and directed for following sizes: -

(a) Cast Iron pipe 150 mm bore.

(b) Cast Iron pipe 100 mm bore.

Labour only for run lead joint by using old lead obtained from dismantling of item No. 5 hereinbefore suitable for cast iron pipe spigot and socketed joint including providing new cocking spun yarn etc. complete all as specified and directed for following sizes: -

(a) Cast Iron pipe 150 mm bore.

(b) Cast Iron pipe 100 mm bore.

M & L for 3 mm thick rubber or fiber board gasket to make the joint leak proof with and including provision of mild steel nut-bolts, washers as required at site complete all as specified and directed for following sizes: -

(a) Joint of 100 mm bore pipe line.

(b) Joint of 150 mm bore pipe line.

(c) Joint of 200 mm bore pipe line.

SONI ENTERPRISES

SHRI SIDHI VINAYAK INFRASTRUCTURE DEVELOPERS

Kapoor Contractor and supplier