Proposed Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, in Naroda Ward, Ahmedabad.

I/We am/are willing to carry out work at __________% above / below (should be written in figures and words) the estimated cost

mentioned above. The amount of my/our tender works out as under

Estimated cost put to tender : Rs. 68,59,63,932.73 Estimated cost put to tender : Rs.

Add_____% Above : Rs ___________ Deduct_____% Below : Rs ___________

In words : Rupees _______________________ In words : Rupees _______________________

The contractor should get the sample of material in respect of quality and source of supply or manufacturer approved by

Consultant / AMC in all cases. All such approved samples should be kept at site in the custody of EIC-CMC/PMC/AMC. The tests

for the make in external laboratory in presence of CMC/PMC/AMC to be carried out by Contractor at his own cost as per relevant

latest codes. Reinforcement steel & cement original purchase bills shall be produced to CMC/PMC/AMC as and when asked for.

Note-2 Rate includes for any height, any level, any lead & lift and as per directed by EIC.

Note-3 For Fire Fighting System Autoglow Mandatory Sinages and NOC Process and charges of NOC are included.

Signature of Contractor Additional City Engineer

Seal Building Project

Date Ahmedabad Municipal Corporation

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ for Civil Work & Site Development Work

Sr. No. Quantity Description of Work Unit Rate Amount

1.00 EARTH WORK

Clearing and grubbing road land includding uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm removal of stumps of tress cut earlier and

1.01 9,465.00 disposal of unserviceable materials. Smt 2.81

A) By Mechanical means in area of light jungle.

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.

1.02 14,070.00 (B) Dense or Hard Soil Cmt. 148.19

Upto 1.50 Mt. Depth

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.

1.03 10,820.00 (B) Dense or Hard Soil Cmt. 160.77

From 1.50 to 3.00 Mt. Depth

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.

1.04 13,810.00 (B) Dense or Hard Soil Cmt. 172.50

From 3.00 to 5.00 Mt. Depth

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.

1.05 6,790.00 (B) Dense or Hard Soil Cmt. 193.41

From 5.00 to 6.00 Mt. Depth

Excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.

1.06 6,790.00 (B) Dense or Hard Soil Cmt. 214.32

From 6.00 to 7.00 Mt. Depth

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by

ramming and watering.

Providing and laying pre-construction Anti termite treatment as per IS-6313 (Part-II) 1971 from standard and specified agency approved by Clerk-Of-Works with ten years

guarantee in foundation, under floors and periphery as per the special agency's specifications and as per directions of Clerk-of-Work. For all levels and leads.

1.09 1,356.00 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete Cmt 455.63

1.10 173.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. Cmt 286.20

Conveyance charges of lime murrum building rubbish earth, manuar of sludge and excavated rock,fly ash & surplus excavated earth from site with the any lead in the city as

1.11 19,856.00 directed by EIC etc. complete. Cmt 326.73

(A) Upto 5.00 Km

Providing and laying rubble soling, 230 mm thick, in a compact manner,foudation, road, footpath etc. using 200 to 230 mm. cut size stones including filling the gaps with

1.13 2,888.00 40mm metal and packing with stone chips with murrum covering and levelling the surface after filling the voids including watering, ramming well and consolidating each Cmt 2,056.00

layer, as directed.

Dewatering by pumping set of Dewatering by pumping set of required capacity including temporary platform carting pumping at site and fixing the same in position including

all accessories, and fuel and labour etc. complete. Pump set of Capacity

Hiring and operating the 20 KV 3 Phase Electric Generator for operating desilting machinery, and lighting and other requirements with Arranging diesel to run the D.G. Set

1.15 230.00 Do As Directed. 8 Hrs Shift. (No payment should be allowed for non working condition of machinery) Shift 2,500.00

(AMC Drainge SOR 2015-2016, Machinary Item No.3 - 12% GST)

1.16 29.00 Hiring of Tractor with trolley considering 8 hrs. as working day hours incl. Driver (GWSSB SOR 22-23 It.No.7 pg.no.105 sec.2.E. mis) Day 2,104.09

2.00 CONCRETE AND STEEL

The structural concrete of the grade specified shall be control concrete as per IS: 456-2000. Use of weigh batcher, Mixture machine, mechanical vibrator and controlled water

cement ratio will be strictly enforced. (Use of concrete mixing plant on site will preferable and design mix shall be produced from Contractor & same approval from

st.consultants)

Contractor must provide mini batching plant at site but in any case, if it is required RMC brought from out side should be of higher grade than original required. No extra

payment or price variation should be given to contractor for such higher grade.

P.V.C spacers / Concrete spacers of appropriate size and design for the cover of reinforcement shall be used.

Sr. No. Quantity Description of Work Unit Rate Amount

Item of reinforcement shall be separately measured and paid for.

In all item rates are for all floors other than specified floorwise.

Providing and laying cement concrete 1 : 2 : 4 (1 - Cement : 2 - Coarse sand : 4 - graded stone aggregates 20 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M300 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 475 kg) (Rate

for All Floor and Heights and no extra lead given for RMC Plant) - upto plinth

Providing and laying in position Ready Mixed M 250 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing

strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg) (Rate

for All Floor and Heights and no extra lead given for RMC Plant) - for all floor level with all lead and lift

Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready mix reinforced cement concrete, tramie

controlled, of M 30 grade using minimum 400 kg cement per cum of concrete including providing and mixing required admixtures in recommended proportions as per IS :

9103, as approved by the Engineer-in-charge, for achieving 150 - 200 mm slump, for diaphragm wall having thickness as per approved structural design not exceeding

mm, in pannels of required depth and lengths as per approved drawing, including constructing necessary guide walls as required and as specified including boring in all kinds

of soils and rocks, including working in or under water and or liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of

earth / rock slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and when required for all depths, including

agitating bentonite slurry during trenching etc., providing and fixing stop ends or form tubes, upto the required depth of diaphragm wall including extracting the same after

casting, including chipping off the bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concrete, dressing undulations on the

exposed face of diaphragm wall after excavation by chipping,chiseling etc. including filling the depression/ cavities with sound concrete etc. complete and as directed by the

2.04 2,131.00 Engineer-in-charge, including providing recess for bearing plates and fixing insert boxes for inclined rock anchors etc. complete as per the specifications and approved design Cmt. 13,821.00

and as directed by the Engineer-in-charge, but including the cost of reinforcement and inserts. (rates include cost of all inputs of labour, material and T & P, cost of handling,

lifting & placing in position the reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc. involved in the work and all other

incidental expenditure for completing the work as directed by the Engineer-in-charge), However, the actual area of the diaphragm wall, correct to two places of decimal, from

design bottom level to the design cut off level (including portion anchored in the rock upto the design bottom level) only shall be measured for payment. (rates include cost of

all inputs of labour, material and T & P, cost of handling, lifting & placing in position the reinforcement cage in the trench, including the additional cost of welding the

reinforcement bars etc. involved in the work and all other incidental expenditure for completing the work as directed by the Engineer-in-charge), However, the actual area of

the diaphragm wall, correct to two places of decimal, from design bottom level to the design cut off level, including anchored as per the design, PVC tendum with required

material, including PVC water stop in each panel. If excess cement is used for design mix no extra payment given for cement and rate is also included extra cement

required for under water concreting.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering

2.05 747.00 below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Sqm 171.68

Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering

2.06 10,086.00 below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of Sqm 252.00

supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.07 1,977.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any Sqm 229.95

thickness) partitions and the like including attached buttresses & string course & the like.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.08 6,021.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns Pillars Posts andstruts. (1) Sqm 297.68

Square Rectangular Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.09 10.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (2) Sqm 422.10

Circular or curved in Plan.

Sr. No. Quantity Description of Work Unit Rate Amount

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.10 15,899.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Sqm 192.15

Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.11 173.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (2) Sides and soffits of Beams Beam Sqm 259.88

Haunchings canti-levers Girders Bressumers and Lintels exceeding 1M.in Depth.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.12 1,070.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (I) Edges of slabs and Breaks in floors and Sqm 67.73

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.13 511.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (L) Chullah Hoods, weather shades Sqm 155.78

Chhajjas Corbels etc. including edges.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

2.14 581.00 supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (M) Staircase with sloping or stepped soffits Sqm 242.55

including risers and stringers excluding landing.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (Q) Vertical fins and vertical sun breakers.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (i) Height more than 4.0 M.and upto 5.0 M.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (ii) Height more than 5.0 M.and upto 6.0 M.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (iii) Height more than 6.0 M.and upto 7.0 M.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (iv) Height more than 7.0 M.and upto 8.0 M.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (v) Height more than 8.0 M.and upto 9.0 M.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 M between supporting floor to ceiling including temporary brick

or stone pillars for supporting as required. (iii) Height more than 9.0 M.and upto 10.0 M.

Steel Reinforcement (TMT Fe 500D) including supplying, cutting, bending, binding, fabricating and placing in the various items of concrete. The rate to include cost of

2.22 20,55,212.96 binding wire and concrete / P.V.C. spacers of appropriate approved design. Foundations, Raft, Footings, Pedestals, Slabs , Beams, Column, For Pardi , Wall , Stair etc. any Kg. 75.46

floor ht. as directed by E.I.C.

3.00 BRICK WORK

Brick work using common burnt clay building bricks having crushing strength not less than 35kg/Sqcm. In cement mortar 1:6 (1 cement : 6 fine sand) etc. complete as

3.01 directed by EIC.

(B) Conventional

3.01.01 567.00 Up to plinth Cmt. 3,981.21

3.01.02 757.00 Ground Floor Cmt. 4,253.46

3.01.03 547.00 First Floor Cmt. 4,293.25

3.01.04 279.00 Second Floor Cmt. 4,333.04

Half brick masonry in common burnt claybuilding bricks having crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) laid to any shape

and thickness including raking out joints, watering, etc complete. (B) Conventional

3.02.01 92.00 Basement Smt. 593.90

3.02.02 281.00 Ground Floor Smt. 646.70

3.02.03 206.00 First Floor Smt. 652.64

3.02.04 23.00 Second Floor Smt. 658.58

Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical

grooves 10 mm wide 12 mm deep complete in cement mortar 1 :6 (1 cement: 6 coarse sand).

3.03.01 34.00 From ground level upto plinth level Cmt. 7,581.15

3.03.02 209.00 Above plinth level upto floor V level Cmt. 9,481.72

Sr. No. Quantity Description of Work Unit Rate Amount

4.00 PLASTER AND POINTING/ FINISHING WORK

Providing and laying single coat Mala plaster in C.M. 1:4 (1 cement : 4 sand) finished smooth with mala, watering etc. complete.For all levels, hights and leads of works.

Wall (Min 15 mm thickness)

4.01.02 4,687.00 Ground Floor Smt. 155.61

4.01.03 3,276.00 First Floor Smt. 178.77

4.01.04 1,190.00 Second Floor Smt. 201.93

Providing and laying single coat Mala plaster in C.M. 1:4 (1 cement : 4 sand) finished smooth with mala, watering etc. complete.For all levels, hights and leads of works.

Ceiling (Min 10 mm thickness)

4.02.01 4,413.00 Basement Smt 139.23

4.02.02 2,468.00 Ground Floor Smt 139.23

4.02.03 2,023.00 First Floor Smt 183.50

4.02.04 199.00 Second Floor Smt 227.77

Providing 20 mm thick double coat mala cement plaster on exterior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement

4.03 4,298.00 mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding Smt 269.78

curing etc. complete. Rate includes for all floor all lead & lift, also includes with grooves as mentioned in design.

20 mm. thick sand face cement plaster on walls upto 10 meters above ground level consisting of 12 mm. thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. thick

finishing coat of C.M. 1:1 (1 cement : 1 sand) etc. complete.

Providing 20 mm thick waterproof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall work using water proofing materials

in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of

10 years after handing over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished before receiving any

payment from the client.

4.05.01 10,423.00 Inside of Basement wall, Toilet Vertical wall & RCC O.H. tank Smt 249.00

Providing and applying 2mm thick Texture Plaster of Earthen Textures, Travertino Texture, Coral texture or equivalent make incorporating fine filaments made of polymer

4.06 173.00 and aggregating natural stone powder with making grooves on existing base coat of 20 mm thick smooth mala plaster etc. Complete with two coat Exterior weather proof Smt 458.00

paint and one coat of primer in any shade As per drawings and design supplied by architect and instruction given by authority and E.I.C. for all floor all height.

Providing 8 mm Luxture decorcem expose concerte or brick concerte coating and wall textured paint using base coat, tapping, durabond expose RCC materials and finishing

with decorsil two coat etc. complete. As per drawings and design supplied by architect and instruction given by authority and E.I.C. for all floor all height.

4.08 1,484.00 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. Rmt 23.45

4.09 1,419.00 Providing throating or plaster drip and moulding to R.C.C chhajja. Rmt 41.25

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecotated wall surface to give an even shae incl.thoroughly brushing the

4.10 surface free from mortar dropings and other foreign matter and sand prepared smooth incl. two coat of primer Asian or equivalent brand and the cost of P/L min. two coats of

Birla putty & two coats of primer as directed by E.I.C /Consultant

4.08.02 9,100.00 Ceilling Smt 159.59

Colour washing with lime on undecorated wall surfaces (Three coats) over and including priming coat of white washing to give even shade including thoroughly brooming

the surface to remove all dirt, dust, mortar drops and other foreign matter etc. complete as per E.I.C.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

Providing and applying a medium grain textured finish designed to be anti mould siloxane modified acrylic coating for exteriors imported water based with selected texture as

approved by Architect. (Basic Rate)

Providing and fixing Chicken wire mesh jali 16 x 24 or approved size of 22 gauge at junction of concrete and brick work / AAC Block work or between different materials

4.14 1,768.00 after making "V" grove between two different material surface and filled with rich cement mortar, nailing etc complete for all floor, any height, all shape etc complete as Smt 285.00

directed by engineer in charge.

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and fixing Structural Glazing with using the 17 Micron anodised of approved colour alluminium section as transium, mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass of approved make, colour, toughned and shade and fixed with silicone sealant and spacer tap and at corner sealed neoprene foam

dust and Air sealed gasket mirred including scaffolding, cleaning of glass etc.complete at all heights anf lifts with all necessary fitting and fixtures, anchore fasteners,

4.15 279.00 necessary M.S. or Aluminium brackets, suitable design for openable or sliding window as per Architectural drawing and as directed by Engineer-in-charge. Grooves between Smt. 4,353.00

the glasses to be filled with sealant of Dow corning - structural sealant 995, weather sealant 789. The entire facade should be water proof. The mullions are to be connected to

bracket by SS-304 nut bolts. Measurement shall be given as per actual execution of the work. (Rate are included providing & fixing of MS structure steel work when and

where requried)

Providing and Fixing Alluminium Composite Panel of (approved make by Architect) 4mm thick exterior grade 30 micron PVDF with coil thick of 0.25 mm & frame work

made out from Alluminium anodised section of size 50 x 25 mm (w app = 0.57 kg/m) having weight of 2.6 kg for 15' supported on Masonary/ RCC with the help of MS

Bracket fixed with Brick Fastner/ Anchor Fastner and groove filled with silicon grade 995 and 789 and G.P Where it is necessary at pressure tape Baker Rod size depend

upon gape between two Panel of bowl corning corporation make etc. complete as per Architect dwg. and as per instruction of E.I.C. (Rate are included providing & fixing of

MS structure steel work for fixing of Alluminium Composite Panel when and where requried)

Providing & fixing of GI, 84mm wide SL-4 Sun control louvers System manufactured of approved exterior grade powder coating (Visible Surface) RAL colour consisting of

84 mm wide x 0.5 mm TCT curved edged louvers having 86 mm (module) c/c and length up to 5000 mm, with square edges, Roll formed. The panel shall be powder coated

(55-65Micron) in white colour (Any RAL colour), Fire performance BS 476 part 6 (1989+A1:2009) – Class 0 & part 7 (1987) – Class 1, Impact Resistance – ASTM D2794

(5/8” ball) inch pound, front reverse, Guard Endure – D6AB, D8AB (Gloss 60-85 & 25-85), Pencil Hardness Test – ASTM D3363-05-(Derwent Graphic), Scratch Resistance

– ISO1518-1/SI83 91 17 approved. Panel shall be clipped to a steel panel carrier of 39mm wide x 86mm deep made of 0.6mm thick in standard length of 3000 mm made of

coil coated black with cut outs to hold the. The carrier will be fixed with using of G.I. L-clit of size 30 x 85mm or as per site requirement. Louvers will be fixed on Box sturd

size 25 x 42mm GI black powder coated pipe for strength of louvers etc. complete as directed by EIC.

Supply and installation exteranal cladding using Shera fibre cement plank of cassia / straight grain /teak coloured texture (exterior grade)with 8mm thickness and dimension of 150mm

x 3000 mm.fibre cement board should be of minimum density1300kg/m3 (+/- 50) and comply to ASTM c 1185 and iso 8336 part (E)for confirming durability propertiesand BS 476 prt

4.18 110.00 5,6,7.thermal conductivity should be mini 0.15 w/m” k and PH value of 7-8, depending on height of structureboard to be fixed using M.S. structural steel section of suitabe with mini Sqmt 3,669.00

spacing 450mm to 600 mm or as per direction of engi incharge.plank to be fixe dusing screws of tensile strength 34N and shear strength 68N on framing maintaining distance of minimum

25mm between two planks.all plank to plank joints to be staggered and finished.

5.00 FLOORING AND PAVING

Providing and laying Min 25 mm thick mirror polished kotah stone flooring / skirting / dedo (55 x 55 or 55 x 40cm) on min 20 mm thick cement mortar bedding 1:6, to get

fine invisible joints, Grey / colour cement floated and machien polishing etc. complete as direction by E.I.C.

Providing and laying polished kota stone slab flooring over 20 mm.(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and jointed

with gray cement slurry including rubbing & polishing etc. complete. [A] 25 mm. thick.

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying rough kota stone slab flooring over 20 mm.(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid over and jointed with

gray cement slurry including rubbing & polishing etc. complete. [A] 25 mm. thick.

Providing and laying Paver Cobel Granite Stones (100 mm x 100 mm x 50mm) over 1 : 3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 1”

thickness, floated with thick and neat cement paste with consumption of cement @ 4.4kg / sqm and 2 kg / sqm for joints mixed with approved pigment to match the shade of

the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. (The rate shall be for the patterns and details provided by the Architect. If

required, residues will be provided and no extra amount will be paid for residues to be used to achieve the pattern).

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural

drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @

5.06 596.00 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified Smt 6,785.00

and as directed by the Engineer-in-Charge.

a. 18 mm thick Italian Marble stone slab as approved by Architect or EIC.

Providing and fixing machine cut, mirror/eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design

and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3coarse sand) laid and jointed with white

5.07 20.00 cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as Smt 9,022.00

per Architectural drawings, and as directed by the Engineer-in-Charge.

a. 18 mm thick Italian Marble stone slab as approved by Architect or EIC.

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and laying Full body glazed/double charge/matt finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption

less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including

grouting the joints etc., complete. Colour and shade as approved by architect. All joints filled with epoxy grout (avg. 4*10 to12 mm).Rate includes for all lead & lift & as per

directed by EIC.

Providing and laying Full body glazed/double charge/matt finished Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than

0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,dedo over 12 mm thick bed of cement mortar 1:3 (1 cement:

coarse sand), including grouting the joint etc. complete. Colour and shade as approved by architect. All joints filled with epoxy grout (avg. 4*10 to12 mm).Rate includes for

all lead & lift & as per directed by EIC. (Rate of adhesive is included in the rate)

Providing & fixing mirror polish Granite for Door Jamb, Sill and the like similar location of 18mm thick, from 1050 to 2105mm in length and width 150mm /250mm in

cement mortar 1:2 [1 white cement : 2 marble dust] with an admixture of pigment to match the marble shade including fixing with copper pin 7.5cm long of 6mm diameters

in cement mortar 1:2 (1 cement : 2 fine sand) including making rebate for door shutter in Granite, edge polishing and moulding etc. completed as directed by EIC /

Consultant.(Clear measurement will be taken on sqmt basis for both Jamb)

Providing and laying lift cladding min.10 mm th. machine cut and mirror polished granite stone for column / wall cladding by using araldite, stainless steel pins it required

including scrapping the surface and making the surface preparation for cladding. Also include for finishing the joints and exposed edges shall be polished and finished with

white cement slurry admixed with the approved shade pigment to match the shade of tiles as per inst. of Architect etc., complete including champhered edges & V grooves

complete as per design. Including cost of 20 mm thick backing coat in C. M. 1 :

Providing and fixing 18mm thick machine cut River wash finish Granite flooring / skirting / dedo of approved quality by architect over 20 mm (average) base of cement

5.12 55.00 mortar 1:4 (1 cement : 4 coarse sand) for staircase steps, entrance,dedo, platform,shelves, flooring, lift etc. with machine cut edges as required and laid in desired pattern. The Smt 3,985.00

rate are included to provide groove in flooring and edge moulding wherever requried etc. comp.

Providing and laying 18 mm thick Granite stone in single piece (min. size 1500 mm) for staircase flooring landing, risers & treads, skirting over 10 mm. average thick base of

5.13 325.00 cement mortar 1:3 (1 cement : 3 coarse sand) and laid over and jointed with grey cement slurry including rubbing and polishing etc. complete. including making edge Smt 2,152.00

rounded including making rough finish at edge & groove etc. complete.

Providing and fixing Granite sand which type platform, counter wash basin including supplying and fixing granite stone 18 mm thick mirror polished 1st quality Granite

stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone platform fixing in top and sides and itermediates supports fixing with

cement mortar and adhesivee and finishing including providing & cutting of kitchen sink (as directed) 600 mm x 450 mm x 200 mm size stainless steel sink (as directed by

engineer incharge) at required position etc complete.

Providing and laying white / coloured ceramic tiles of 1st quality of specified size, colour, shade and of approved make, in floor with cement paste on and including

5.15 4,053.00 bedding.coat of plaster in cement mortar (1:3). All joints filled with coloured / white cement putty as per architect detail and wiped to give sharp joints with flush pointing and Smt 960.47

washed clean with acid as direction by E.I.C.

Providing and laying coloured glazed tiles in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement

Providing and laying Min 25 mm thick River Wash Kotah stone flooring (55 x 55 or 55 x 40 cm) or platform slab size for stair, pantry (not less than 1500mm long size) with

5.17 55.00 hand dressed and filled edges, set complete on min 20mm thick cement mortar bedding 1:4, with machine cut edges as required and laid in desired pattern. The rate are Smt 1,941.00

included to provide groove in flooring and edge moulding werever requried etc. comp. as direction by E.I.C.

5.18 152.00 Providing & laying Tac tile 300mm x 300mm x 15mm flooring. The tile laid using with adhesive as per site condition including all labour and material, cleaning, curing, etc., Smt 7,178.00

complete all As per drawings and design supplied by architect and instruction given by authority and E.I.C.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off

junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of

vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wid and pasted to each other with bitumen @ 1.7 kg/sqm). Rate includes

for all lead & lift & as per directed by EIC.

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of

following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab includingadjoining walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1 : 5 (1 cement : 5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height

including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS :

and approved by Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement

slurry and making pattern of 300 x 300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as

directed and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing & laying china mosaic flooring on top of integral waterproofing using small broken chips of white/colour glazed tiles set in crazy pattern, as desired by Architect, in

cement mortar laid to required slopes and simultaneously filling in remaining top joints in the waterproofing layer and tamped with wooden block to get smooth even surface

5.21 1,300.00 to required slope, filling the joints with cement grout, cleaning the surface on completion and curing etc. complete. The work sahll be carried out in a workman like manner to Smt 739.89

make the give a guarantee on stamp paper for the performance for a period of ten years. The work shall be measured in square meter of the actual area laid and no extra shall

be paid for vatahs, rounding at junction of wall and floor and around water spouts, water outlets etc.

50 mm thick I.P.S. in cement concrete 1 : 2 : 4 laid in levels and grades desired in bays as directed and finished smooth by mala floating including curing, marking of bays

with thread as directed etc. complete.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in

fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 Kms. having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in levels and pattern of bays as detail of architect and

finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc., finishing and reinforcement including cost of

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained). The rate shall include cost of side shuttering with channels,

rails, to form panels and groove cutting etc. including filling the joint with glass strip/polysulphite complete to use. The rate shall also include the cost of reinforcement

approximate calculated at 5.14 kg/Smt. Rate for all lead & lift & as per directed by Engineer in - charge.

(Note: - Cement content considered in this item is @450 kg/cum.)

6.00 DOOR-WINDOW/ STEEL WORK/ S.S. WORK

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W. frame 120 mm x 80mm shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed wood based exterior grade bonded BWP / BWR synthetic resin having stamped IS 12823 grade I type II including

three coats of lacquer polishing to exposed wooden surfaces and Stainless steel decorative type designs fixtures / fastening 2 Nos. Handles, 2 Nos. Aldropes, towerbolt

etc.including I.T.W. triangular batten patti of size 30mm x 30mm etc. as per architectural detailed drawing and as directed by engineer in charge.

6.02 335.00 Providing and fixing OZ-BHF-2BB 4 x 3 x 3 mm SS Ball Bearing Butt Hinges for Flush Door OZONE make. Nos. 382.83

Providing, Fabricating and Erecting in position anodised (15 to 25 micron of desired colour) door shutter (double action opening) of standard aluminum section from 18mm

(3/4”) series of Jindal, Hindalgo, Domal or approved equivalent make of size as described below or of higher series if required as per site condition-top and vertical style

6.03 32.00 47.62 x 44.45 x 2 mm (w approx = 1.05 kg./m), lock rail and bottom section 114.30 x 44.45 x 2 mm (w approx = 1.83 kg/m), fitted on frame of size 101.60 x 44.45 x 2 mm Smt. 4,574.00

(w app = 1.60 kg./m) with standard accesories like handle , stopper, locking arrangement, C.P. brass hinges, etc, and glazing of 5 mm thick float glass of Mody or approved

equivalent, fixed with rubber / PVC beading in upper and lower panel complete with 12 mm both side pre laminated sheet as per architecture detail dwg.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x

1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no: 8947 @ wt. of 0.456Kg/mt, Section 8948 @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm

6.05 55.00 (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), Smt 1,568.27

vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation

Providing and Fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood grain raised pannel design finish shutter having extra reinforcement on sides

and edges and in polish finish The core of the shutter is to be filled up with injected fire extingushing grade.polyurethane foam done in situ along with embedded wooden

6.07 65.00 pieces for stiffering and also for tacking hinges and fixtures. The whole FRP frame and shutter is to be water proof.weather proof,tennite proof and resistance to mild acid/ Smt. 1,999.98

Alkali, Rates are to be inclusive of S.S. hinges with necessary screws and brass fixtures and fasening. Product should have 3 years performance guarntee and company have

ISo 9001-2000 certificate.

Providing and fixing stainless steel (Grade 304) for railing, Expansion joint covering etc. made of Hollow tubes, channels, plates, pipes etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval

of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing stainless steel (Grade 304) railing made from 50 mm OD pipe with 1.5 mm thick on top, Boluster of 38 mm dia OD pipe with 1.5 mm thick and 12 mm

thick frosted toughened glass including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of Engineer-in-charge

Providing & fixing rolling shutters of approved make made of 80 mm. Wide M.S. laths inter locked together theit entire length and jointed together at the end locks mounted

6.10 37.00 on specially designed pipe shaft with bracket plates, guide channels and out side locking with push-pull operation excluding the cost of Hood cover and spring etc. comp. (A) Smt 2,718.41

Shutters having width below 3.5 mt.

6.11 11.00 Providing and fixing hood cover for rolling shutters. (A) Shutters having width below 3.5 meters. Rmt 120.03

6.12 5.00 Providing and fixing 27.5 cm long wire spring grade No 2 of approved make for rolling shutters. No. 630.91

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider

Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider

& bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel

brackets & Anchor bolts and at the bottom using SS channel of 50 x 25 x 2 mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon

bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to

accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled

with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including

approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer

plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the

portion of Glass panel inside the SS channel shall be measured.

Dormakaba ES PROLINE Automatic Sliding Door Operator

Dormakaba automatic Sliding door operator ES 250 PRO Easy 6150 mm with low-noise drive motor without gearbox, TÜV design tested for 1.5 Million Cycle of opeartion

in accordance with low voltage guidelines of IEC /EN 60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards. With the clear passage width up to

mm. The Profile Finish should be Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm. Drive with acoustically decoupled and exchangeable running

rail and wear-resistant special surface. Rollers made of special plastic, Counter rollers as derailment protection.Mounting plate with prefabricated fixing holes and threaded

holes. Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time 0- 180 Sec, with smps, Class of

protection IP 20.Program Switch with Knob, ES 250 PRO Easy, Maximum Panel Weight Carrying Capacity of 2X 125 Kgs & 1X 125 kgs each leaf. The Max. opening and

closing force by the opeartor should not exceed 150N and maximum power consumption should not exceed 130W during opeartion mode.The operator should be equipped

with EM failsafe / fail secure lock with Nemo Combi sensor with 2x Microwave for activation and double rows of 24 spots failsafe Safety infrared curtains without the need

of Photocell. The system shall have constant power supply 230V+ 5%, 50Hz, AC .

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and Fixing of Hi-Rib Roofing System comprising of Hi-Rib profiled sheeting 1000-1015 mm. cover width of 30mm. crests @ 250-255mm. c/c. manufactured out

of 0.5 mm TCT (Total Coated Thickness) SMP coated galvalume (550 Mpa yield stress) steel. The sheet shall have wide pans with stiffening ribs for effective water shedding

and special male/ female ends on side-laps for purlin support and anti-capillary flute in side-lap. (The sheet shall have hot-dip metallic coating of zinc aluminium alloy coating

7.01 1,137.00 mass total of both sides, AZ -150 as per AS-1397. The sheet shall be 20 micorn top coat applied over 5 micron primer and conversion coat and a 5 micron polyester back coat Smt 955.00

along with the self-drilling fasteners. The sheet shall be supplied in custom lengths and for maximum upto 12mtr. The maximum end lap of sheet shall be 150mm and sealed

with silicon sealant.) The sheet fixed with GI rubber coated J or L hook, bolts and nuts 8mm dia. with polyemer protective caps and antileackage washers. Only covered area

shall be measured for the payment.

Providing and Fixing of ridge manfuctured out of same material as mentioned above in Item No : 1 on roof sheet and purlin fixed with GI Rubber coated J bolt and protective

7.02 55.00 polymenr caps and antileackage washers and GI round washers minimumn 2 nos. per sheet on the purlin with matching profile between the ridge and roof sheeting panels etc. Rmt 955.00

complete as per the details.

Providing and Fixing Flashing, Capping and Gutters manufactured out of same material as mentioned Item No : 1 in standard length of 2.5 Mtr. and fixed by means ofhex-

head self-drilling stitching screws.

Providing and fixing Under Deck Insulation work by using Knauf or TWIGA make glass wool of 50mm thick, 48 kg/m3 density with aluminum foil. Including weld mesh

jali, all accessories, material & labor complete as directed by Architect / Engineer – in – charge

Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, gates, bars, truss, purlins, runners, cleats, insert plate, base plate etc for all

structural elements as per detail, made up from closed structural steel hollow sections (RHS/SHS including rolled section ) or angle or chanel with weather resistant of Tata

7.05 1,26,123.00 Structural / sections or an approved equivalent as per details / drawings/instructions including cutting, bending, jointing, connecting, welding and / bolting and / riveting and Kg. 109.00

fabricating and erecting in position etc complete for all levels as directed. The rate to include all necessary fixtures, fastening including welding rods of standard approvded

quality etc for complete the job. The rate shall also include the two coats of synthetic enamel paint with priming coat & necessary scaffolding etc. complete as directed

Providing, Fabricating and erecting TATA Structura or equivalent Pre Fabricated or Pre-engineering Structure made of sections made from high tensile steel plate having

7.06 11,000.00 strength of E355 grade (YST 355 Mpa & UTS 490 Mpa) including necessary connections, welding, insert plastes, slidce plate etc. complete with one coat of zinc chrome and Kg. 156.00

two coat of enamel paint etc. complete as directed by EIC.Rate includes for all floor all lead & lift.

Providing, Fabricating and erecting TATA Structura or equivalent Pre Fabricated or Pre-engineering Structure made of sections made from high tensile steel plate having

7.07 68,125.00 strength of E310 grade (YST 310 Mpa & UTS 450 Mpa) including necessary connections, welding, insert plastes, slidce plate etc. complete with one coat of zinc chrome and Kg. 104.00

two coat of enamel paint etc. complete as directed by EIC.Rate includes for all floor all lead & lift.

8.00 MISCELLANEOUS ITEM

Providing and fixing pre-cast Rubber moulded inter locking concrete block 80mm thick with grade of concrete M40 pnumatic compressed by mechanically pressed and as per

8.01 1,925.00 approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc. complete and including cost of carting of debrises in out Smt. 1,173.00

side of premises with all lead & lift as directed by engineer in charge.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length, 30cm height and 15cm thick of M250 grade concret as per approved

design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

8.03 33.00 Providing & Fixing AUTOGLOW Signages in Block / Small Letters of Specified Sizes Fire lift size: 4" X 12" Each 298.93

8.04 98.00 Providing and laying Autoclave Aerated Concrete Block chips/bats (for shallow sunk) cement concrete in 1:4:8 (1 Cement : 4 Coarse Sand : 8 graded Autoclave Aerated Cmt 4,272.00

Concrete Block chips/bats) grade including compacting, finishing, curing, form work (if required) etc. complete as directed by engineer in charge.

Providing & fixing of reinforcement bars after drilling the hole of required diameter & depth, cleanning of the same, providing / filling the hole with Injection Mortar (HIT

HY 200r of Hilti or approved equivalant),inserting reinforcement bar etc. complete as per Manufacturers & architects instruction. The work shall be carried out by the

technical workmens/agency approved by the manufacturer and under technical supervision of Manufacturer of Injection grout including all materials, tool tackles, labour etc

completed as directed by E.T.C / PMC. Rate shall be included required testing like pull-out etc. & over all design shall be measured forces by structural design consultant.

8.05.01 110.00 for 20 mm. dia.bar -Holes 25mm dia Depth 200mm to 250mm Each 1,087.00

8.05.02 110.00 for 16 mm. dia.bar -Holes 20mm dia Depth 160mm to 250mm Each 604.00

8.05.03 110.00 for 12 mm. dia.bar -Holes 14mm dia Depth 120mm to 200mm Each 253.00

8.05.04 121.00 for 10 mm. dia.bar -Holes 12mm dia Depth 100mm to 175mm Each 207.00

8.05.05 132.00 for 8 mm. dia.bar -Holes 12mm dia Depth 100mm to 175mm Each 184.00

Making holes upto 50 mm dia. 300 mm long in any RCC members by diamond Core Cutting machine of HILTI or equivalent including disposing the debries etc completed

as directed by E.T.C/PMC .

Making holes upto 100 mm dia. 300 mm long in any RCC members by diamond Core Cutting machine of HILTI or equivalent including disposing the debries etc completed

as directed by E.T.C/PMC ..

Sr. No. Quantity Description of Work Unit Rate Amount

Making holes upto 150 mm dia. 300 mm long in any RCC members by diamond Core Cutting machine of HILTI or equivalent including disposing the debries etc

completed as directed by E.T.C/PMC .

Providing & Fixing anchor fasteners of Fischer make or approved equiv. including drilling in RCC / Masonary Members, fastening with structural steel members etc

8.09 55.00 complete. No. 362.00

a) 8 mm dia. 110 mm long

Providing & Fixing anchor fasteners of Fischer make or approved equiv. including drilling in RCC / Masonary Members, fastening with structural steel members etc

8.10 55.00 complete. No. 431.00

a)10mm dia. 110 mm long

Providing & Fixing anchor fasteners of Fischer make or approved equiv. including drilling in RCC / Masonary Members, fastening with structural steel members etc

8.11 55.00 complete. No. 610.00

a)12mm dia. 110 mm long

Providing and Fixing ABS Plastic SPEED BUMP of Size :- 750 mm x 250 mm x 75 mm, Per Mtr # 4 Nos (2 black, 2 yellow), TOP DESIGN – LINE DESIGN ANTI SKID

PATTERN FOR GRIP fililing CEMENT INSIDE etc. complete as directed by Engineer-in-charge.

Providing and fixing 1mm thick steel deck sheet of TATA Smartdek or approved make having steel confirmed to AS1397, YST345MPA and BS EB 10147 : 2000 120 gsm

8.13 220.00 including hot dipped zinc coated high strength steel having coating of Z180 (min 180 g/sqmt total of zinc coated on both sides) fixing with self driven screw of size 12 x 24 x Smt 1,518.00

38 mm (max. drilling - 8mm) etc. complete as directed by EIC. (Rates are included Shear Connectors)

Supply and install modular toilet cubicles of MERINO-BESCO make 'ZMS SS' series as per manufaturer's std specifications.All intermediate panels, pilasters, doors shall be

made up of Solid Compact Laminate of 12 mm thickness (Phenolic Core Board) as per IS 2046 based on thermosetting resins, homogeneously reinforced with cellulose fibers

making cubicles impervious to Water, resistant to Fire, etc. Compact laminate should be Greenguard and IGBC certified

Thickness of Compact Laminate : 12mm

Color of HPL Boards: Single Standard Compact Color

Special Remarks For Customization:

Size of Cubicle : 1000mm (W) X 1550mm (D) X 1980mm (H)

Door Size : 1750mm (H) X 600mm (W)

Divider Size : 1775mm (H)

Overall Height Of Cubicle : 1980mm (Including bottom Gap of 150mm)

8.14 33.00 Standard - Merino Make Stainless Steel - 304 Grade accessories) No. 36,317.00

a) SS "U" Channel

b) SS "F" Channel (Only Corner Unit)

c) SS Door Stopper Channel

e) SS Coat Hook

f) SS Privacy Thumb turn c/w Occupancy Indicator

g) SS Door Knob

h) SS Spring Loaded Butt Hinges with Cover

i) SS Adjustable Foot - 316 Grade

j) Rubber Lining for Door Stopper

k) Screws & Wall Plugs

SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard-

Providing and fixing of Urinal Modesty Panels (UMP) for Urinals of Length - 1200mm, Width - 450mm and Panel thickness - 12mm, design of panel as per architect. (Make:-

Merino or Equivalent)

Sr. No. Quantity Description of Work Unit Rate Amount

Providing and fixing 100 mm expansion joint system of Horizontal Internal : Floor to Floor FF : The work shall consist supply and installation of joints and seals -

expansion/seismic joint system model MSDSZJ/SFFS / MSD -QZJ -SFFS/ MSDGCP in accordance with the drawings and requireements of the specifications below. The

joints are proprietary design utilizing extruded aluminum base members, self aligning / centering arrangement and support plates.The material shall be such that it provides

wateright flat joint cover expansion control sysytem that is capable of accommodating multidirectional seismic movement without stress to its components.System shall

consisit of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and floor/roof treatments. The cover plate

shall be designed of width and thickness requried to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-

engineered self-centering arrangement that freely rotates / moves in all directions. The self - centering arrangement shall exhibit circular sphere ends that lock and slide inside

the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement ,Including EPDM Profile including

cost of GP2 grouting. The joint sysytem shall resist damage or deterioration from the impact of falling ice, exposure to UV,airborne contaminants as per manufacturer

speciation and the joint design and drawing ,complete

Providing and fixing 100 mm expansion joint system of EM / MSNG/ MSNSK system designed for internal/External wall and ceiling finishes with expansion movement of

design for internal/EXTERNAL application on wall to wall/ceiling /wall to corner where exposed metal plate /consealed metal plate /flush metal plate desired as per the joint

design and design width over the joint profile INCLUDING EPDM Profile including GP2 grouting as per the joint manufacturer speciation and the joint design and drawing

,complete (Vertical)

Providing and Fixing Trap Door

(A) Size 1300 x 700 mm

8.21 935.00 Providing and Fixing catpitch cover of LD-5 tonne capacity Nos. 1,696.25

Providing and fixing clay material and stone poweder cladding with 5 mm to 10 mm thick clay sheet of size 600 x 1200 with any shape cladding with using requre PU,

Cement, Polymer based adhesives with all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Providing and fixxing of M.C.M.

Cladding as approved by Architect.

HIGH PRESSURE LEMINATE BOARD

Providing and fixing HPL board as per drawing, HPL as per is 2046 & en-438 manufactured under high pressure >5 mpa & temperature >120 cc with bunch of craft paper

impregnated with thermo setting phenolic resin & decorative paper mades of alpha cellulose fiber impregnated with thermo setting malamine resin which provide superior

scratch,abrasing heat,chemical,impact,graffiti & moisture resistance along with anti bacterial properties. With hardware & accessories from besco , all screws,hinges, coat

hook,privarcy indicator,top rail in 304 stainless steel with wall and corner joinery and adjustable legs in 316 ss grade. And anti noise rubber pads including all material, labour

and hardware, waste of materials and complete the work satisfactorily as per instruction of architect or Engineer-in charge.

8.24 110.00 Sinage - internal and external signage boards in vinyl etc. as per architects details sq.mt. 5,600.00

8.25 110.00 Sinage - internal and external signage boards in aluminum, ACP sheet, S.S., wood etc. as per architects details sq. inch. 42.00

Providing and fixing tiled false ceiling of size (600x600) mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel

sections. It consists of main "T" runner of size 24 x 32 x 0.3 x 3600mm, cross "T" of size 24x25x0.3x1200mm, secondary cross "T" of size 24 x 25 x 0.3 x 600mm and PPGI

wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm of all Tsections shall be of 0.25mm thick PPGI. PPGI wall angle 24 x 24 x 0.4 x 3000mm

{MaterialGI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at

300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc soffit cleat 27 x 37 x 25 x 1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277)} is fixed

with Gyproc Rawl Plug- 8 x 45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm

grid. Main-T runners 24 x 32 x 0.3 x 3600mm {GI(IS513)YS-280Mpa,Finish- alvanised 120GSM(IS277) are then suspended at 1200mm c/c. from ceiling using 4mm zinc

electroplated butterfly level clips of size 85 x 30 x 0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints. The last

hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 24 x 25 x 0.3 x 1200mm cross T {GI(IS513)YS-280Mpa,Finish- Galvanised

120GSM(IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" 24 x 25 x 0.3 x 600mm

{GI(IS513)YS- 280Mpa,Finish-Galvanised 120GSM(IS277)} is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends

having length more than 600mm are to be supported independently. Finally 9.5/12.5mm thick square edge Gyproc Polyshield Gypsum tile (meets requirement of

specification mentioned under DAR no. 12.52.3 in Delhi Schedule of rates (DSR)), of size 595 x 595mm, made of Gypsum plasterboard, manufactured from natural gypsum

as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed

with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid.

8.27 165.00 Providing and Marking MURAL made out of 2mm thick s.s. plate grade 304, including making necessary design as per Architect dwg. Through laser cutting including connection to the Sqmt 19,780.00

R.C.C./Masonary with necessary frame,anchor fastnuts,M.S.Plate etc. complete at any floor any height.

Sr. No. Quantity Description of Work Unit Rate Amount

Providing & Fixing of Lay-in perforated tile false ceiling on 24mm ‘T’ Framework of module 600mm x 600mm. Panels shall be manufactured of size 575mm x 575mm made

out of 0.5mm TCT thick GI. The perforation shall be 1.8mm (20% open area) & 2.5mm holes (16% open area) in a 3mm diagonal pattern. The Tile shall be powder coated

(60Micron) in white colour, Fire performance BS 476 part 6 (1989+A1:2009) – Class 0 & part 7 (1987) – Class 1, Impact Resistance – ASTM D2794 (5/8” ball) inch pound,

front reverse, Guard Endure – D6AB, D8AB (Gloss 60-85 & 25-85), Pencil Hardness Test – ASTM D3363-05-(Derwent Graphic), Scratch Resistance – ISO1518-1/SI83

17 approved in module size of 600 x 600mm. The Tile will be manufactured on advanced equipment, which includes several levelling. The tile shall be manufactured in a

single stage manufacturing procedure from a die. Grid system for fixing ceiling tiles shall comprise of Tees. The 24mm main tee runners shall be suspended at an interval of

1200mm c/c. The 24mm cross tee runner shall be suspended at 600mm c/c and further supported with 24mm cross tee at 600mm c/c with interlocking arrangements to form

grid of 600mm x 600mm. The main tee shall be supported by means of 4mm GI rod from slab/roof. The suspension shall be provided at 1200 to 1500mm c/c. etc. complete as

directed by EIC.

8.29 275.00 Providing and fixing of brass T Patti with black or dark gray finished or approved by architect on the wall, including all accessories labour charges complete. Rmt 403.00

Providing and fixing Wood plastic composites (WPC) fluted wall cladding of required size including approved shade in approved pattern as directed by the architect. Rates

shall be inclusive of all hardware fittings and fixtures as required to fix the same on the wall and ceilings including corner beading and fastners.

Designing, Providing and erection of ferro cement work "Elevation design" with ferro cement sturcutre 40mm-100mm thickness of structure as per the design with a cement

8.31 110.00 mortar of 1:4 (1 cement : 4 sand), 6/8/10/16, 25 mm FE500 TMT bar, chicken mesh 14x14 , weld mesh jali as per requirement, GI wire, additives, welding, painting with Sqm 6,095.00

required colour and pigments and all necessary labour, tools, equipments and scaffolding etc as directed engineer and charge and as per the design provide by architect.

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP

Naroda Ward, Ahmedabad.

Summary of Plumbing Work

Sr. No. Item Description Amount

1 Internal Plumbing

2 External Plumbing

Total Amount for Plumbing Work

Total Amount for Plumbing Work

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ for Internal Plumbing Work

Sr.No. Item Description Unit Total Qty. Rate Amount

Providing & Fixing Water Closet (European Type W.C. pan ) Wall-Hung Water Closet with Quiet Close Seat and Cover in

White with P-trap including seat cover and Conceal Flush tank & Complete with all other accessories having dimension as per

manufacturers of approved make and conforming to Manufacturers Standards as per Drawing, Technical specification &

instructed by Consultants in charge.

Code no. SKU: K-26998IN-0 Kohler Make, Conceal Tank 20084IN-M-NP

Providing & Fixing Water Closet (European Type W.C. pan ) Wall mounted, with Chair Bracket / Anchor Fasteners, Open or

1.2 Concealed Flushing Tank, Complete One Unit Testing & installation as per drawing & specification. For Common Area ( Make No. 1.00 15,000.00

Fixing Wash Basin Table Top , with necessary CI or MS brackets, Bottole trap fittings, 40 mm dia CP waste coupling, Testing

& installation as per drawing & specification.

Code no,: Kohler K-5373IN-0

Providing & Fixing Wash Basin Wall mount type , with necessary CI or MS brackets, Bottole trap fittings, 40 mm dia CP waste

coupling, Testing & installation as per drawing & specification. For Common Area ( Make Jaquer)

Providing & Fixing Urinal sensor type opearting , with necessary CI or MS brackets, inside Bottole trap fittings, 40 mm dia

outlet, Testing & installation as per drawing & specification. For All

Code no.: 26474IN-ER-0, Sensor - 24199IN-C01-CP

Providing & Fixing Stainless steel single Kitchen Sink. 50 mm dia. CP waste coupling, CP Bottle trap, Testing & installation as

per drawing & specification. Make Nirali 600 X 400 MM

Providing & Fixing C.P. Angle valve with C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete

complete job finish work. (code no K-76389IN-9-CP)

Providing & Fixing C.P. Wall Mount Cock (Cold Only) for Basin, install with Brass Threaded fittings, complete complete job

finish work. (Code no K-33103IN-4ND-CP)

Providing & Fixing C.P. Pillar Cock for Basin, install with Brass Threaded fittings, complete complete job finish work. ( Make

Providing & Fixing C.P. Sink Cock Floor mount for Kitchen Sink, install with Brass Threaded fittings, complete complete job

finish work. ( Make Jaquer)

Providing & Fixing Health Faucet with C.P. connecting pipe 1000 mm long and nuts, washer and install with Brass Threaded

fittings, complete job finish work. (Kohler make Deco model )

Providing & Fixing C.P. Bib Cock at Wash Area install with Brass Threaded fittings, complete job finish work. (code no K-

Providing & Fixing C.P. Two Way Bib Cock at Wash Area install with Brass Threaded fittings, complete job finish work. (code

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Sr.No. Item Description Unit Total Qty. Rate Amount

1.15 Providing and fixing toilet paper holder. (A) C.P. Brass No. 27.00 414.53

Fixing, jointing, testing and commissioning of Low Noise Sound proof pipe for Soil & Waste upto 160mm dia. including all

necessary fittings such as 45 or 90 deg. bends, Tee's, Y's, access pipe with rubber ring jointing. Fixing at wall / ceiling level

supported by galvanized brackets & pvc coated clamps, Air vent cowl & hangers etc. (Inside the Building i.e. Internal Toilet

Draiange Line - Hanging Line)

SOIL & WASTE RING FIT - for Auditorium

2.1.1 40 mm Dia for Basin Rmt 54.00 490.00

2.1.2 50 mm Dia for urinal & Sink Rmt 96.00 596.00

Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working pressure polythene pipes of the following outside Dia.

2.2 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and

floor.( as per drawing work)

SOIL & WASTE & RAIN WATER - solvent fit

Fixing, jointing, testing and commissioning of UPVC Pipe Type-B Confirming to 13592-1992, for Soil & Waste / Rain Water /

Air Vent Line upto 200mm dia. including all necessary fittings such as 45 or 90 deg. bends, Tee's, Y's, access pipe with rubber

ring jointing. Fixing at wall / ceiling level supported by galvanized brackets & pvc coated clamps, Air vent cowl & hangers etc.

(Inside the Building i.e. External Building Tower Duct Line / Rain water Line / Basement Hanging Line)

SOIL & WASTE & RAIN WATER - RING FIT

Fixing SWR quality, heavy duty, Silensio heavy Duty ‘P’ Trap of Brand or equivalent make, with Sq. 150 x 150 mm CP pressed

2.4 steel Grating, to ceiling and floor, including cutting the walls and floors and making them good, testing, etc., complete having No. 43.00 1,336.00

110mm inlet and 110mm outlet. It shall have minimum water seal of 50mm Testing & installation as per drawing & spefication.

Fixing SWR quality, heavy duty, Height Riser for Basin Pipe inlet connection of Brand or equivalent make, 40 & 50mm inlet

and 110mm outlet. Testing & installation as per drawing & spefication.

Fixing SS 304 material Jali 100 x 100 in Balcony area of Brand or equivalent make, Testing & installation as per drawing &

2.7 Fixing Cleaning cap for maintenance purpose in hanging draiange line in ceiling & basment area PP Material

Supply installation, testing and commissioning in position Popypropelene Vent Cowl in dome shaped above Terrace Level

piping, for necessary vent as per direction of engineer. (Work within Plumbing shaft)

Sr.No. Item Description Unit Total Qty. Rate Amount

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

3.1 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete.[A] 15 mm.Testing & installation as per drawing & spefication.

(CONCEALED PIPE LINE) HOT & COLD

Fixing uPVC pipes & fittings SCH 40 including all fittings including fixing the pipe with clamps at 1.00m spacing. This

3.3 includes jointing of pipes & fittings with solvent cement, The scope shall include all required civil work to install the piping

system (for water distribution). Testing & installation of pipe lines as per drawing & spefication.

(GARDEN / TERRACE LELVEL / DUCT PIPE LINE / BASEMENT)

Fixing SS/Brass/Gun Metal Ball Valve, Ball valve must be having screwed ends. The ball valve should be with stand with

maximum pressure up to 16 Kg/cm2. Testing & installation of valve as per drawing & spefication.

3.8 Supplying, fitting & fixing PP Non return valve as per relavant standard , tested to 10 kg/sq.cm etc. complete.

Total Amount Internal Plumbing

Total Amount Internal Plumbing

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ for External Plumbing Work

Item Description Unit Qty Rate Amount

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.

4.2 MAN HOLE WORK

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2-coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2-coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with

Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1- Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing

and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight

of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

4.4 Fixing Manhole cover RCC cement heavy duty

4.4.1 455 x 610 mm size having weight Capacity 10 Ton Minimum - FRP No. 812.71 -

4.4.2 500 x 700 mm size having weight Capacity 40 Ton Minimum - RCC No. 2.00 3,500.00

4.4.3 600 x 850 mm size having weight Capacity 40 Ton Minimum - RCC No. 6.00 4,900.00

4.4.4 900 x 900 mm size having weight Capacity 40 Ton Minimum - RCC No. 7,500.00 -

4.4.5 900 X 1200 mm size having weight Capacity 40 Ton Minimum - RCC No. 4.00 9,650.00

(Quanity changes possible as per final drawing)

Construction work of Storm Water Channel in Road level area with RCC base 'C'' type channel with proper line & slope as

per design, Top side framing cover fitting FRP or MS powder coating Jali as per design,

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber. (ii)

for 500mm x 700mm size.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber. (iii)

for 600mm x 850mm size.

Item Description Unit Qty Rate Amount

Supply, installation, testing & commissioning of Auto Tyoe solenoid valve cystem for OH Water tank controllging system

with switches, hardwares, interlocking with panel, etc.

5.2 HYDROPNEUMATIC SYSTEM FOR DOMESTIC WATER

Installing, testing and commissioing of Hydropneumatic System comprising of Vertical multistage / horizontal centrifugal Pumps

with CI casing, SS impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be

supplied with all accessories viz., base plate, coupling, motor, VFD based control panel, dry run & overload protection, cabling

up to panel, earthing, GI medium duty suction, delivery & header pipes, pressure gauge, pressure switches, pressure transmitter,

suction ball valves & delivery ball valves & check valves etc., complete.

1 Working + 1 Stand by sytem for garden & Common area GF level Water Distribution, Flow Rate - 200 LPM @ 25 Meter

Head 1.5 HP per Pump

Installing, testing and commissioing of Mud Pump in Basement sump area with suction & delivery pipe line, ball valves &

check valves etc., complete., 1 Working + 1 Stand by (10000 LPH X 15 METER HEAD) 1.5 HP per Pump

Installing, testing and commissioing of PVC Water Tank at Terrace level with Controlc cock fitting, Inlet, Outlet, tnak

connection, drain, overflow all do with necessary pipe & fittings. Charges incuded lifitng at GF to Terrace level.

2000 Liter Tank 4 layer white Color for LH Side Toilet Set 1.00 15,000.00

2000 Liter Tank 4 layer white Color for RH Side Toilet Set 1.00 15,000.00

Percolation Well: Boring and Sinking 150 mm diameter casing pipes up to minimum 120.00 meter depth, as per specifications

5.5 with any approved system like Auger, Derrick etc. including installation of other equipments such as Pumps, Water Tanks, etc. Set 3.00 5,00,000.00

complete and thereafter withdrawal and removal of the system etc. complete and clearing the site on completion.

Total Amount External Plumbing Work

Total Amount External Plumbing Work

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ for Electrical Work

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SECTION 1.00 POINT WIRING

Point wiring in Copper (Modular)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

1 600.00 below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame Pt. 485.81

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC /

3 150.00 Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / Pt. 674.68

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

4 150.00 erected with following type of accessories. Pt. 510.05

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

5 400.00 erected with following type of accessories. Pt. 745.38

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

6 100.00 erected with following type of accessories. Pt. 871.63

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling with following type accessories Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected

9 10.00 with necessary connections as per site situation directed by Engineer In charge. Ea. 160.59

(4) TV Co-axial Socket outlet Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected

10 50.00 with necessary connections as per site situation directed by Engineer In charge. Ea. 25.25

(7) Blank Plate Single Cat-III

11 5.00 Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete Erected Ea. 42.42

12 5.00 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 71.71

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

14 3,000.00 adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 32.32

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

15 100.00 adhesive solution & Clamps with following dia of pipes, in approved manner as directed Mtr. 54.54

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of

PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . ..(2) 25 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of

PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size .(3) 32 mm

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal

19 300.00 and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes Mtr. 277.75

(1) 75 mm x 50 mm trunking

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal

20 50.00 and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes Mtr. 428.24

(2) 100 mm x 50 mm trunking

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling,

21 3,500.00 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size Mtr. 62.62

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm (FRLS)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly -

24 300.00 Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. Mtr. 39.39

SECTION 2.00 CABLES & ACCESSORIES

ARMOURED ALLUMINIUM CABLES.

25 1,000.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following Mtr. 1,407.94

(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

26 700.00 size of cables Mtr. 904.96

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

27 200.00 size of cables Mtr. 540.35

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

28 200.00 size of cables Mtr. 490.86

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

29 200.00 size of cables Mtr. 378.75

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

30 250.00 size of cables Mtr. 284.82

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following

31 1,500.00 size of cables Mtr. 153.52

(A) 4 core 16 Sq. mm

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

32 2,000.00 following size of cables Mtr. 140.39

c) 4 Core 10 Sq.mm.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

(a)7 core 1.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road

34 200.00 crossing or floor of following size of cables. Mtr. 364.61

(B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road

35 200.00 crossing or floor of following size of cables. Mtr. 510.05

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing

36 50.00 or floor of following size of cable. Mtr. 287.85

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing

37 150.00 or floor of following size of cable Mtr. 395.92

(C) 3 core 6 Sq. mm

38 10.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Ea. 33.33

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

c) 2 to 4 Core 10 Sq.mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

d) 2 to 4 Core 16 Sq.mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for

41 4.00 following size of cables. Ea. 75.75

(B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(D) 3 & 1/2 core 95 Sq. Mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(G) 3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

(I) 3 & 1/2 core 300 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

plated nut bolts in an approved manner.

(B) 10 Sq.mm (ISI MARKED)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

48 150.00 plated nut bolts in an approved manner. Ea. 15.15

C) 16/25 Sq.mm. (ISI MARKED)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

49 20.00 plated nut bolts in an approved manner. Ea. 20.20

(D) 35/50 Sq.mm. (ISI MARKED)

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

50 55.00 plated nut bolts in an approved manner. Ea. 25.25

(E) 70 Sq.mm. (ISI MARKED)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

51 20.00 plated nut bolts in an approved manner. Ea. 40.40

(F) 95 Sq.mm. (ISI MARKED)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

52 20.00 plated nut bolts in an approved manner. Ea. 45.45

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

53 65.00 plated nut bolts in an approved manner. Ea. 80.80

( I ) 185 Sq.mm. (ISI MARKED)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

54 50.00 plated nut bolts in an approved manner. Ea. 98.98

(K) 300 Sq.mm. (ISI MARKED)

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated

55 35.00 nut bolts in an approved manner. Ea. 8.08

(A) 1.5/2.5 to 6 Sq.mm (ISI MARKED)

Providing and erecting Epoxy Outdoor / Indoor end termination Kit suitable for LT PVC insulated armoured cable1.1 KV grade complete with ferrule bushing and accessories and suitable

56 10.00 clamps duly erected and connected to the supply for all cores cables of following size. Ea. 381.78

57 979.53 Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground. Mtr. 55.55

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth

58 250.00 for laying of cable. below ground / road surface for enclosing cable Mtr. 137.36

(d)120 mm inner dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth

59 250.00 for laying of cable. below ground / road surface for enclosing cable Mtr. 62.62

(A)50 mm inner dia

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation

60 200.00 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Rmt. 322.19

150 X 50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation

61 200.00 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Rmt. 767.60

(7) 600 X 50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation

62 300.00 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Rmt. 471.67

300 X 50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation

63 500.00 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Rmt. 274.72

100 X 50 X 1.5 mm Thick

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate

64 10.00 / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Ea. 146.45

150 X 50 X 1.5 mm Thick 90° Elbow

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079. with coupler

65 10.00 plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Ea. 219.17

300 X 50 X 1.5 mm Thick 90° Elbow

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079. with coupler

66 10.00 plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Ea. 108.07

100 X 50 X 1.5 mm Thick 90° Elbow

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079. with coupler

67 10.00 plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. Ea. 94.94

50 X 50 X 1.5 mm Thick 90° Elbow

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding,

grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.. (for

Cable Tray support & PANEL)

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SECTION 3.00 SENSOR

SENSOR FOR -Open workstation, Cabins,TOILETS:

69 15.00 Providing & erecting stand alone ceiling mount PIR motion Sensor with ABS Housing single phase AC operation. Complete with Dual element pyroelectric sensor, Digital Signal Processing NOS 4,366.23

Detection Range 14 feet at 10 feet height, angle 360 degree, RFI and EMI immunity, Detects motion in it's coverage area. Multipurpose device can be used as security device, an energy saving

device, an automatic switch. Complete with infra red sensor, Light & sensitivity Sensor, Timer with Bye pass facility. Suitable for 400 watts electrical load

SECTION 4.00 SWITCHGEARS & DISTRIBUTION BOARDS

MINIATURE CIRCUIT BREAKERS.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Cat-III

(c)63 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity ((QTY

73 40.00 FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III Ea. 595.90

(A) 6-32 Amp Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity((QTY

74 45.00 FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III Ea. 668.62

(B) 40 Amp Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-

75 5.00 1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (A) single phase incoming and horizontal single phase outgoing Ea. 885.77

(b) sheet steel double door (IP-43) (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-

76 5.00 1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (A) single phase incoming and horizontal single phase outgoing Ea. 1,152.41

(b) sheet steel double door (IP-43) (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-

1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door (IP-43) (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-

1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door (IP-43) (iii)8 way

Supply installation Testing and commissioning of Surge Protection Device shall be Type-2 for DB LEVEL and IEC 61643-11/2011 T2 and EN 61643-11 Type 2 for internal protection with

drill type mounting

EARTH LEAKAGE CIRCUIT BREAKERS.

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Cat-III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

81 35.00 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed Ea. 2,235.13

(ii) 40Amps. DP Cat-III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

82 3.00 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed Ea. 2,654.28

(iii) 63 Amps. DP Cat-III

Pproviding and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V having Normal current rating 400A. with variable

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. and above at 415 V having normal current rating up to 630A. with

variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing

Operational Handle Assembly Complete with spreader links and rotary handle.

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Ui=1kv ,impulse voltage=12 kv with following type

of relay and accessories.

(B) with microprocessor Release with over load, short circuit, earth fault protection and metering display in modular design with LED display and Test Trip button facility, CTs and auxiliary

contacts, of following current ratings

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same.

(ii) 1000Amp 50 kA Cat III

Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Ui=1kv ,impulse voltage=12 kv with following type

of relay and accessories.

(B) with microprocessor Release with over load, short circuit, earth fault protection and metering display in modular design with LED display and Test Trip button facility, CTs and auxiliary

contacts, of following current ratings

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same.

(iv) 1600Amp 50 kA Cat III

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

91 10.00 following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. Ea. 4,687.41

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

92 4.00 following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. Ea. 4,983.34

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

93 8.00 following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. Ea. 5,415.62

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

94 5.00 following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. Ea. 6,056.97

Providing & erecting additional parts for Air Circuit Breakers as follows:

(B) Auxiliary Contact Block for CN-CS 800 to 2500 & 6 NO + 6 NC

Providing & erecting additional parts for Air Circuit Breakers as follows:

(G) Shunt Release Type EA:24/48 V, 110V, 220V DC

Providing & erecting additional parts for Air Circuit Breakers as follows:

(I) Under Voltage Release Type MV(2) : 240V AC, 415 V AC

Providing & erecting additional parts for Air Circuit Breakers as follows:

(N) CTs for 1250 C / 1600 C for Fixed & Drawout Type ACBs

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. Capacity

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(D) Suitable for 400 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(E) Suitable for 630 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

(G) Suitable for 1200 Amp.capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary connections.

Suitable for 2000 Amp.capacity

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(iv) with 1000 mm. depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts,

105 20.00 foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq. Mtr 19,387.96

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(ii) with 550 mm. depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts,

106 5.00 foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary Sq. Mtr 14,902.55

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory .

(i) with 350mm depth

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

107 500.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 91.91

(f) One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

108 300.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 17.17

(b) One wire 1.50 sq. Mm

Sr. No. Quantity Item Descriptionan Unit Rate Amount

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

109 300.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 142.41

(g) One wire 16.00 sq. Mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

110 300.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 27.27

(c) One wire 2.50 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

111 300.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 37.37

(d) One wire 4.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in

112 300.00 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. Mtr. 56.56

(e) One wire 6.00 sq. mm

Providing and erecting ,Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware materials as per requirement design with finishing by three

tank powder coating processed inside and outside painted, erected as directed including minor civil work.

Painting the number and words for inventory Identification on erected fittings / equipment’s or Such accessories as may required with good quality of enamelled paint as directed by engineer in

(i) up to 20 characters, up to 50 mm height.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding,

grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

117 60.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter Ea. 274.72

118 6.00 Providing & erecting L.T. Current Transformer with bar primary 1600/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter Ea. 808.00

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with necessary connections.WITH SWITCH FOR BMS INTEGRATION FOR ALL

FEEDERS OF PANELS. (For R-Y-B & on-off-trip indication)

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following Voltage, Frequency, Apparent energy, Apparent power, Active

and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1,

V2, V3, Phase currents, Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V

DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in

121 50.00 Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt 61.1 kg / Sq.Mtr) Sq.Mtr. 3,531.97

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty

Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene

122 1.00 film tye3-phase 550Volt Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Sc, OL, internal earth Each 5,80,323.78

fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs 485 Communication port, Indication LED Lamps

for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on

123 10.00 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof Ea. 3,168.37

thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

124 10.00 Supplying & erecting power contactor for time switch complete erected as per direction Cat III [C] 4 pole 440V 16 Amp. Ea. 857.49

125 10.00 Supplying & erecting power contactor for time switch complete erected as per direction Cat III [D] 4 pole 440V 40 Amp. Ea. 2,782.55

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SECTION 5.00 LIGHT FIXTURE AND FAN

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

126 100.00 Luminaire efficacy> 85 lumens/watt , Nos 1,794.77

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

127 200.00 LED driver efficiency > 85 % Nos 589.84

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Cat-lll.

Supply, Installation, testing & erecting of reccess / surface mounted 22 W with high performance LEDs. With dimeble driver (ALUMINIUM DIEA CAST BODY)White powder coated,

elegantly designed pressure die-cast aluminium heat sink for efficient dissipation & white finish polycarbonate ring for holding the diffuser. with anti rusted and anti corrision treament body High

quality polycarbonate opal concave diffuser.High efficiency long life SMD LED mounted on MCPCB with high system efficacy of 100 lm/W . Electronic driver Powered by integral SMPS based

128 200.00 constant current electronic driver with lower THD, Output Short Circuit Protection, Surge Voltage Protection . Lumen Output of 1800 lumens, with Efifcacy>100Lm/W, CRI >80, Color Nos 5,555.00

temperature 5700K, THD <10% and PF >0.95,IP20,IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-

60 HZ; Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE

SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-lll.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iv) 16 to 20 watts Cat-III

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet cat-iii

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet cat-iii

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(G) Step Light having Aluminium die cast and ABS Plastic material.

(i) 5 watts, Direct/Indirect luminaire Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(D) LED Strip Light

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete CAT-III

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of BIS approved LED street light luminaire with system power 80W (± 5%) , available in Natural White color temperature (4000K ± 355K as per ANSI C78:377A) ,CRI≥80, SDCM<3

LEDs used should have a life of 100000 burning hrs. & Lumen maintenance as per L90. The Luminaire System efficacy should be of ≥160LPW. LED Luminaires must be equiped with with

preprogrammed time based factory set dimmable driver, registered for Street Lighting under BIS- CR Compulsory Registration Scheme. The fixture housing must be Made of LM 6/ADC 12 PDC

Aluminium housing for rapid thermal management & Powder coated by Corrosion resistant Nano coating powder coating process. Proper technical quality documents for Nano-Technology

powder coating should be submitted by OEM compulsarily. Luminaire must have a Ingress protection of IP66 and Impact Resistance of IK08 for housing and optical impact to be IK 09. The

fixture should have an UV stabilized, Injection moulded special PC cluster lens optics ensuring low glare & best in class uniformity. Light Engine PCB should be Metal Core PCB made of high

grade Al 5052 with ≥70 micron copper thickness & 2 W/mK thermal conductivity for better thermal maintanance for light Engines. Luminaire should have minimum or more than nett weight of

3.25 k.g. The Luminaire must have thermally Isolated Driver and Optical compartments separated by natural air gap for efficient heat management and to ensure sustainable operation with dual air

cross conductivity. Both luminaire housing and optical compartment should have OEM logo embossed / engraved (no stickering is allowed). Driver must be placed in a separate hingeable bottom

openable compartment which is replaceable in the field condition with minimum Tools. The light engine should have a suitable secondary optics to deliver desired light distribution to meet the

136 40.00 illuminance criteria. The Junction temperature of LED shall be < 85 degree Celsius. The luminaire must have Integral encapsulated high efficiency electronic driver having a Aluminium extrusion Ea. 14,645.00

housed construction with a wide rated voltage range of 140-270V, Driver efficiency >85%, power factor > 0.95, THD < 10%. The driver must be compatible with Inbuilt surge protection of 6KV

and upgraded with integrated IP67 protected SPD of 20KV/10KA surge protection within the driver compartment. Luminaire should be with basic protections like short circuit, Mis wiring

reverse polarity with LM 79, LM 80, & TTC certificates will be provided from a NABL accredited lab. Luminaire performance & Safety should comply to IEC 60598, IS 10322-5, IS 161-

03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. All certificates supporting the technical parameters of luminaire & OEM scope must be submitted. The BIS of luminaire should carry

own manufacturing facility of OEM. Dedicated vendor / sub-vendor facilities are not accepted. Manufacturer should have their own NABL accredited testing laboratory for EMI-EMC test,

Vibration compatibility test, Salinity spray test, wind load pressure test, IP / IK test, in house powder coating facility, in house casting plant, robo-photometric laboratory and in house driver

manufacturing facility, SMT line in India. OEM should have own manufacturing facility for quoted LED fixtures in India which should be functional for last 10 years and should have dedicated

official team for after sales and service support based out of Gujarat. Official undertaking certifying OEM's lighting sales, design & service maintenance office presence in Gujarat must be

submitted. Manufacturer should have Certification pertaining to product Design Registration, CE certifications, ROHS compliant, BIS certificate for drivers and luminaires respectively. All above

technical points should be compulsarily backed up by supporting documents and need to submitted in the tender in hard copy and soft copy.

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin polyester/epoxy resin system having minimum glass content 45.0%.The pole should be in one pieceand tapered round

in shape,having smooth outside surface finish and should be totally fre from corrosion as well as non conductive and shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S) and dully claded with FRP/GRP material to avoid any metal exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695) 200+/‐50MPa, 7. Yeild Strength(ASTM

137 40.00 Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance and pigmented. Pole should be painted with first coat of epoxy primer and then two coat of highly weather Ea. 16,983.15

resistance polyurethen paint to ensure proper addhesion of the paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall not exceed more than 10.0 % of the length of the

pole for the given load.Pole should be generally made as per the dimensional data,performance criteria and some interchagebility features of poles as per the standard ANSI C123.20 latest version

of ASTM D 923/01 including cable termination box with necessory accessories.The size of pole and type of installation with foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .

(3) 'B' class (Heavy Duty) frp/grp pole suitable for base plate mounting

[D] Overall Length of 6.0 meter, Average thickness : 7mm, Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of Pole 25.0 Kg approx. (Without base) Metal Anchor Base dully frp claded (Size :

340 Ø * 12mmthk , Mounting hole PCD 285mm * 6 nos. of 20 Ø hole)

138 40.00 Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm Ea. 240.38

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or

139 40.00 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. Ea. 809.01

( for 4 & 6 mtr pole)

140 40.00 For using salt and charcoal / coke as required for pipe type earthing. Ea. 171.70

Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm thk,1000mm long from pole centre

(A) Single arm bracket

Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm thk,1000mm long from pole centre

(B) Double arm bracket

FANS & ACCESSORIS.

143 100.00 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with Ea. 1,948.29

aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by Engineer in charge))

FAN ACCESSORIES.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing.

145 100.00 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original. Ea. 43.43

TABLE FANS, EXHAUST FANS & ACCESSORIES.

146 25.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. Ea. 1,703.87

200mm with 1350RPM Cat.II

Sr. No. Quantity Item Descriptionan Unit Rate Amount

147 10.00 Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, Ea. 2,534.09

flexible Core plug top complete erected with lead wires as directed. Cat.II

SECTION 6.00 EARTHING AND LIGHTINING PROTECTION

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

149 250.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 77.77

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double

150 4.00 Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per Ea. 7,874.97

direction & duly tested by earth tester confirming to IS (As per drawing) with following specification

(C) with 60 x 60x 0.315 cms. Copper earth Plate

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC

151 40.00 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following Ea. 5,992.33

dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

152 15.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000-4000 mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse current Ea. 9,416.23

withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet the requirement of

IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at

153 500.00 every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning Mtr. 299.97

impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the

requirements of IS/IEC

Supply Installation Testing and Commissioning of Supply of 8 mm Aluminium Round Conductor complete as

specified in drawing & meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC62305). Roof conductor holder for parapet- Polyamide Conductor holder:

With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter

154 600.00 distance. Cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Mtr. 728.21

Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and

directed by Engineer.Lightnig counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6.

with following type accessories.

(OEM shall conduct survey of the premises and submit feasibility report prior to supply of materials and installation).

SECTION 7.00 UPS SYSTEM

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF

batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over

load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for

momentary load.

[L]40 KVA 3 - phase with 1Hr Backup

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF

batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over

156 1.00 load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for Nos 1,30,103.16

momentary load.

(D) 5 KVA with 1Hr Backup

SECTION 8.00 WATER COOLER

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C within a

hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supply of following items.

1nos. pc with 19.5 " screen (FHD) and with mouse and key board Computer with following specifications:-

System Configuration :Desktop PC i7 3.4GHZ,11th gen., 240GB SSD, 16GB RAM, 1TB Hard Disk, 4GB Graphics, WiFi (Desktop cabinet Image may vary)

As per drawing and design supplied by architect and instruction given by authority and E.I.C.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Supply of following items

1nos. Colour Ploter Printer (up to A1 paper size) EQ. TO HP DesignJet T250 24 Compact Large Format A1 Plotter Printer. WitH standard Specification. &

159 1.00 1nos. Colour Ploter Printer (up to A4 paper size with scaner). Ea. 1,41,400.00

All accessories for use of Electrical Department.

As per drawing and design supplied by architect and instruction given by authority and E.I.C.

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free container housed in ABS plastic body insulated with glass wool / puff insulation and 3 Kw

heating elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto reset indication lamps, thermal cut-out, safety valve fusible plug etc.

SECTION 9.00 HT CABLE

161 100.00 Providing and erecting ISI Marked 3core 300 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor to be laid on wall with clamps or in provided cable trench / pipe approved Mtr. 3,030.00

manner as directed.

Supply, Installation, testing and commissioning Heat Shrinkable type high tension cable end box Indoor type suitable IS: 13573-1992. for 11 KV 300 Sq.mm 3core H.T. cable complete with

gland bushing and jointing material.

Supply, installation,testing and commissioning of outdoor (IP-65) 1 WAY, 11KV PANEL as per SLD, Specification, Technical Data sheet,IS & make list.

Supply, installaton, testing & commissioning of 11KV breaker panel as per Specifications, Technical Data sheet, Standards & Make list with metering unit, comprissing of following:

VCB : 1 Nos. (1No. of I/C), 11KV, 3 phase, 50Hz, 1 No. 630A, 21 KA, VCB, motor operated spring charge mechanism. Breaker shall be horizontal draw out type. Basic insulation level 28kV

power frequency withstand 75kVp lightening impulse, with closing & tripping coil, auxiliary contact - 4NO + 4NC, mechanical ON / OFF indicator & push button, with mechanical antipumping

feature & power pack unit.

Main busbar - 11Kv, 3phase, 3W, 50Hz, 630A, Al busbar, 21KA for 3 second.

Incomer side CT - 1-phase, epoxy cast resin type, CT ratio of 300/5+5A, BIL:28RMS/75kVp. ( panel builder check CT ration as per standard requirement )

156 1.00 core-1: 15VA, CL-1.0, for metering & core-2: 15VA, CL-5P10 for protection. Nos 4,04,000.00

Outgoing Side CT - 1-phase, epoxy cast resin type, CT ratio of 150/5+5A, BIL:28RMS/75kVp. ( panel builder check CT ratio as per standard requirement )

core-1: 15VA, CL-1.0, for metering & core-2: 15VA, CL-5P10 for protection.

Digital Multifunction Meter, CL-1.0

Indication Lamps & protection relays - R,Y,B phase Indications, VCB On and OFF, breaker control switch, Autotrip/trip circuit healthy/ test/ service, spring charge, motor spring charge,

Annunciator, Emergency stop push button, space heater, thermostate and panel illumination, 12 window annunciator, door limit switch for test and service position, BMS compatible.

Protection & Measuring CT ratio change as per transformer sizing shall be calculated by ht panel vendor before finalization.

Protection relays as 50, 50N, 51, 51N, 94 , 86, 27 , 59, 64R. Panel shall be as per SLD and technical specifications.

Supply, installation,testing and commissioning of outdoor (IP-65)1 WAY, 11KV HTMC PANEL as per SLD, Specification, Technical Data sheet,IS & make list.

Supply, installaton, testing & commissioning of 11KV breaker panel as per Specifications, Technical Data sheet, Standards & Make list with metering unit, comprissing of following:

VCB : 1 Nos. (1No. of I/C ), 11KV, 3 phase, 50Hz, 1 No. 630A,21 KA, VCB, motor operated spring charge mechanism. Breaker shall be horizontal draw out type. Basic insulation level 28kV

power frequency withstand 75kVp lightening impulse, with closing & tripping coil, auxiliary contact - 4NO + 4NC, mechanical ON / OFF indicator & push button, with mechanical antipumping

feature & power pack unit.

Incomer side CT - 1-phase, epoxy cast resin type, CT ratio of 180/5+5A, BIL:28RMS/75kVp. ( panel builder check CT ration as per standard requirement )

157 1.00 core-1: 15VA, CL-1.0, for metering & core-2: 15VA, CL-5P10 for protection. Nos 5,55,500.00

PT (metering module at Incomer side)- 1-phase, epoxy cast resin type, draw out feeder connected with HT fuse. PT ratio shallbe 11KV/√3/110V/√3, 100VA, CL-1.0

Digital Multifunction Meter, CL-1.0

Indication Lamps & protection relays - R,Y,B phase Indications, VCB On and OFF, breaker control switch, Autotrip/trip circuit healthy/ test/ service, spring charge, motor spring charge,

Annunciator, Emergency stop push button, space heater, thermostate and panel illumination, 12 window annunciator, door limit switch for test and service position,under voltage protection relay,

over protection relay,numerical protection relay,earth fault relay with power pack unit and CT for relay.

NOTE: HTMC panel approval required from GEB/liasoning before execution.

Supply, installation,testing and commissioning of outdoor (IP-65) HT meter cubicle with enclouser with 3rd party testing certificarte as per GEB requirment, Specification, Technical Data sheet,IS

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SECTION 10.00 TRANSFORMER & SUBSTATION EQUIPEMENT

SITC of 11KV OUTDOOR COMPACT SUB-STATION WITH OIL TYPE TRANSFORMER

A. HT SWITCHGEAR

11 KV HT RING MAIN as per following specification,

1 WAY NON-EXTENSIBLE 11 KV , 21 KA FOR 3 Sec MOTORISED OPERATED 3 NOS 630A VCB SF6 ENCLOSED MOTORISED BREAKER 24V DC FROM BATTERY / BATTERY

CHARGER, SELF POWERED 3 O/C +1E/F RELAY - 2 NOS, CT RATIO -100-50/1-1A, CL -5P10, 2.5VA, CL 1.0, 2.5VA, GAS PRESSURE INDICATOR, LOCAL REMOTE SWITCH -

NOS, BATTERY WITH BATTERY CHARGER (230VAC TO 24V DC) - 1 NO, FEEDER PROTECTION RELAY (50,51,50N,51N,64R,27,59) - 1 NOS, MASTER TRIP RELAY - 1 NOS

DIGITAL TRAFO CARD FOR BUCHHOLZ, WTI, OTI TRIP - 1 NOS, MFM WITH RS 485 PORT - 3NOS ,DIGITAL VOLTMETER - 1 NO,VOLTAGE TRANSFORMER,

11000/RT3/110/RT3/110/RT3, CORE 1 : CL 1.0, 200VA, CORE 2 : CL 3P, 100VA QTY : 3 NOS, Control Cabelling from Transformer to NCT & vice versa shall be in scope of CSS vendor.

B OIL TYPE TRANSFORMER

SITC of approved make oil immersed 1000 kva ONAN cooled, double wound, core type indoor copper wound 11KV/ 433V step down transformer of following capacities operating on 3 phase,

50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first

filling of new transformer oil & standard fitting as below complying with IS 1180( Part 1 ):2014 standards with energy efficiency level 2 Off load tap changing range steps +2.5% to -5% on H.V

for variation should be provided. The H.V. shall be connected Delta & Secondary with star connection. The transformer should have cable-end boxes on H.T. side suitable for up to 3 core

sq.mm. XLPE cable & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers

1. Oil conservator with filling Hole & Cap - One No. ,Thermometer pocket with 6" dial type thermometer switch alarm & trip contacts- Two nos., Silica-gel breather with charge- One

No. 4. Plain oil level gauge - One No., Drain / Sampling / Filter valve- One No., Top Filter Valve - One No., Explosion vent with Diaphragm - One No., Rating & Diagram plate - One

No., Additional neutral bushing for earthing - One No., Bi directional Roller - Four Nos. Earthing terminals - Two Nos. Lifting lugs - Two Nos., Air release plug. - One No., Double float

161 1.00 buchholz relay with Alarm and trip contacts., Control cable as required from Transformer to VCB Panel is to be provided with necessary connection to VCB relays for protection. Ea. 30,30,000.00

C. LV PANEL 1600AMPS ALUMINIUM BUSBAR 50KA (100% FOR PHASES AND NEUTRAL) - CURRENT DENSITY OF ALUMINIUM 0.8 A/sq.mm. LT panel shall be made up

of 1.5/2mm thick CRCA sheet. Interconnection between Transformer and LT Switchgear shall be using Aluminium busbars.

INCOMER CUM OUTGOING FROM TRANSFORMER

1 Nos. 1600 Amps 433V 4P 50Hz 50KA EDO Type Air Circuit Breaker (ACB) with Microprocessor based release for Overload , Shortcircuit and Earth Fault protection, RYB, ON/OFF Trip

Indication with MCB protection , MFM class 1,relay,under voltage protection relay, over protection relay,high speed tripping relay/master trip relay, over current and Earth Fault (IDMT+Inst.)

relay protection as per standard specifications, Protective CT shall be 2000/5A 15VA 5P10,REF CT shall be 3200/5A 15VA Class PS, CT – 1600/5A, CL - 0.5, Burden - 15VA for Metering.,

PT -433V/√3/110V/√3, CL - 0.5, Burden - 100VA., , BMS Compitible Outgoing Cable Terminaiton arrangment suitbale for 6 # 3.5C X400 SQ MM AL XLPE CABLE.

D. OUTDOOR ENCLOSURE

Outdoor type enclosure having construction of Galvanised Sheet Steel having 2mm thickness for Load bearing member and 1.5mm thickness for Non Load bearing members with minimum 4mm

thick ISMC Channel base frame in corrugated type wall design for better heat dissipation and providing robust construction. The Enclosure shall have IP54 degree of protection for HT & LT

switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint ( colour RAL 7032 ). Each

compartment shall be provided with the door and pad locking arrangement. Doors of transformer compartment are fitted with Arc reflectors from the inside for providing better safety. The

Compartment illumination lamp with door operated switch shall be provided for each compartment.BMS compatible.

E. INTERCONNECTION AND EARTHING

Interconnection Between HT switchgear & Transformer using 1Cx3Rx300 Sq.mm XLPE Aluminum Single core cable & Interconnection between Transformer & LT switchgear using

Aluminium Busbars. Internal earthing connections by 50 x 6mm GI strips.

Sr. No. Quantity Supplying, Testing, Commissioning & unloading at site, shifting to the erection site assembling,

Item Descriptionan

leveling, grouting, installing, field testing and commissioning of 350 KVA Stabilizer.As per Unit Rate Amount

Specification, Technical Data sheet,IS , comprissing of following:.

Input supply system:-3Phase,4 wire, 50 Hz +/- 2 % AC for unbalance load

Input voltage range:360 TO 480 V, Supply Frequency:-50 Hz +/- 2%,,Output Voltage:-415 +/- 2%

Type of duty:-Continuous heavy duty with constant output voltage to suit voltage sensitive equipment.

Load:-Suitable for 3 Phase Unbalanced Load (100% Unbalanced Load) with Individual Phase Voltage Correction

Unit efficiency:-More than 95% at rated output.

Servo Motor Drive:-Triac based drive for AC Step Synchronous motor.

Type of Servo Control:-Micro Controller based True RMS sensing and correction.

Electronic overload Cutoff:-CT based Electronic cut off circuit with graded time delay set @ 110% of rated full Load current.

Controls:-Through synchronous servo motor capable of producing high torque with low inertia & capable to withstand lock rotor test as per clause 10-17 in IS:9815-1981. ,Correction rate:-8-12

V/sec. P to P .,Installation TYPE:-Outdoor,Response Time:-10ms

Type of Oil:-Transformer Oil, Grade 40 KVA, Confirming to IS335.,Type of cooling:-Oil cooling ,Class of insulation:-Class – A/B

Ambient/operating temperature range:-0 - 55 degree.,Relative humidity:-95% non-dripping.

Mode of operation:-Auto/Manual mode with selector switch and manual set of push button shall be provided along with Lower/Rise

selector switch provides on front panel along with bypass switch.

Protection:-Under/Over voltage and Single phase preventation shall be provided.

Additional Protection:-Over load/Short circuit/Manual Bypass/Input MCCB.

Metering:-Seven Segment Display.

Harmonics controls:-Suitable RC Network/MOVE snubber ckt. for AC Synchronous Motor.

Documentation:-Detailed operation manual should be provided which contain operation maintenance and troubleshooting guide and complete set of wiring drawings. Cabinet/Enclosure:-CRCA

sheet steel fabricated free standing floor mounting type dust & vermin proof closed cabinet. Paint:-The cabinet should be first painted with red oxide and then two coats of anticorrosive air dried

enameled paint applied on primer and putty finish. Dimmer:-Three separately operated dimmer should be provided for unbalance load.

Lamination:-Should be made from CRGO(Cold-rolled grain oriented) lamination.

Indication:-1. Mains on indication. 2. High/Low voltage indication display to be provided on the panel for the individual phases.

Coil:-Electrolytic grade copper , Carbon Brushes:-Higher graded and capacity should not be less than 10000 operations. Carbon brush failure protection required. Control Card:-Control card

should be electronic type with necessary IC's and/or triacs.It should not be with any moving parts like relays to control the AC synchronous motor.

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally

164 2.00 Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Ea. 214.12

165 50.00 Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm Sq.Mtr 1,027.17

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal

user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete.. [A] For 5 Kg Capacity

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [A] For

4.5 Kg Capacity

SECTION 11.00 LIAISONING WORK

POWER CONNECTION & STATUTORY APPROVALS

(LIAISONING WORK FOR TORRENT POWER/GEB FOR TRANSFORMER/HIGHRISE - 1 NOS. CSS & 1 NOS. DG SETS , HIGHRISE , LIFT)

Charges for doing liasioning work for taking power for the premises obtaining the necessary clearances from the Electrical inspector / competent Authorities for the total Electrical installation, co-

ordinating with various agencies. All necessary drawings, calculations, test certificates, etc. as required by these authorities shall be prepared and furnished by the contractor. Any

modification/rectification as required by these authorities shall be carried out by the Contractor.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SECTION 12.00 DG SET

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer (With DEF

System) and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with

antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity armoured

cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of

40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per

PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full load . Erection, commissioning and satisfactory testing as per requirement with

first filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical

Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel

System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)

(V) Continuous rating of 500 KVA ,BHP not less than 600 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket

for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual

operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(G) AMF Control Panel for 500 KVA 3 phase DG Set

172 1.00 providng and erecting Approved make. energy meter 3 phase 4 wire unbalanced load 500 V.50A / 100A complete erected as directed with necessary earth wire. Cat. III Nos. 2,611.86

173 1.00 providng and erecting Suitable set of CTS for 100A Energy Meter Nos. 2,105.85

Providing & erecting approved make ATS panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps for Generator ON, Mains

ON, Load and suitable control terminals and power terminals with neutral earthing studs.

(H) ATS Panel for 320 KVA/ 380 / 400 /500 KVA3 ph DG Set

Supplying & erecting approved make Four Pole 415V Motorised Automatic transfer switch including controller with UV/OV, phase sequence, single phasing and frequency protection interior for

175 1.00 panel mounting with operating mechanism A.C.23A duty confirming to IS for Nos. 1,38,292.23

(K) 1000 A Cat. III

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees

etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required

complete in all respect.

Note:- The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm

thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

(C.) 200mm dia.

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding,

grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete.

SECTION 13.00 Comprehansive Maintenance for Electrical & ELV Works

Provide annual maintenance service (including supply of material) and operation for 1 years after handing over of work for

electrical and ELV works as per schedule including necessary materials to be given under warantee free of cost, etc.

1st Year ( After DLP Period)

Provide annual maintenance service (including supply of material) and operation for 1 years after handing over of work for

179 1.00 electrical and ELV works as per schedule including necessary materials to be given under warantee free of cost, etc. job 11,78,601.46

2nd Year ( After DLP Period)

Provide annual maintenance service (including supply of material) and operation for 1 years after handing over of work for

180 1.00 electrical and ELV works as per schedule including necessary materials to be given under warantee free of cost, etc. job 11,78,601.46

3rd Year ( After DLP Period)

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Supplying skilled labour ITI Electrician for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with

all requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

1st Year Operation (During DLP Period)

(B) One nos. ITI Electrician per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Electrician for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with

all requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

2nd Year Operation (During DLP Period)

(B) One nos. ITI Electrician per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Electrician for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with

all requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

3rd Year Operation (After DLP Period)

(B) One nos. ITI Electrician per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Electrician for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with

all requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

4th Year Operation (After DLP Period)

(B) One nos. ITI Electrician per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Electrician for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with

all requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

5th Year Operation (After DLP Period)

(B) One nos. ITI Electrician per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Helper for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with all

requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

1st Year Operation (During DLP Period)

(B) One nos. ITI Helper per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Helper for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with all

requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

2nd Year Operation (During DLP Period)

(B) One nos. ITI Helper per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Helper for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with all

requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

3rd Year Operation (After DLP Period)

(B) One nos. ITI Helper per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Supplying skilled labour ITI Helper for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with all

requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

4th Year Operation (After DLP Period)

(B) One nos. ITI Helper per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Supplying skilled labour ITI Helper for Electrical maintanance work like over had line, street light cable connection wiring faults and repairng works at hopspital/medi. college Campus with all

requiered instruments & tools (taparia or approved make) like tester, dismis, hammer, crimping machine, insulation tape,magger, clip on meter, earth tester, spanner box, 6 to 8 foot ladder , as

work assigned by Engineer In-charge on all working day or as per Instruction given at minimum wage act. payment will be done to all person in presence of Engineer Incharge. (i-card & uniform Per

must essential ) Attendance sheet (software generated) to be submitted for payment . month

5th Year Operation (After DLP Period)

(B) One nos. ITI Helper per shift (Govt. License Holder) (Two Shift = 8 Hours) ( payment to be given as per requirement of man power as per shift)

TOTAL AMOUNT ELECTRICAL WORK

TOTAL AMOUNT ELECTRICAL WORK

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ for ELV Work

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Section 01.00 Fire Detection & Alarm System

'SITC of Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel with

Loops modules and each loop capable of supporting not less than 250 devices (detectors &

modules should be in any combination) ; Loop length up to 1.5 km, 8" Color LCD touch screen

display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports &

Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for

individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch,

Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall have seamless integration with

EVAC certified Public Address System and shall be complete with all accessories . EN54 /

Vds/UL Certification.

SITC of Modbus/Bacnet Gateway for Integration with BMS System. The Modbus/BACNET

Gateway shall act as an independent node communicating on the peer to peer network and shall

not be dependant on the Fire Panel CPU for operation (failure of CPU shall not result in failure of

Modbus/BACNET Gateway).

SITC of Fire Graphics software with lifetime license to map, monitor (alarms & faults) & control

all the detector and devices connected to all the Fire alarm panel. The fire Graphics software shall

be loaded on the PC connected to the Fire alarm panel. The GUI based main network software

shall network with other panels on True Peer-to-Peer network. It shall be capable of graphically

representing each facility being monitored with floor plans and icons depicting the actual locations

of the various systems, and / or sensors’ locations. It shall have the facility to change the

sensitivity of any detector.The software shall have minimum 2000 Points + 20% for future

FIRE WORKSTATION

SITC of Client Workstation with following configurations: Processor – Intel i7 12th Gen,

GHz,Memory – Minimum 16 GB,Hard disks – 512 GB SDD ,compatible OS for VMS, Network

Card – 10Gbit/s network card,NVIDIA Graphic card of minimum 4 GB, Dual Port card for

connecting minimum of 2 LCD Screen complete with all accessories required to complete the

installation as per project requirements.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of Active Repeater panel to be connected peer to peer with Main Fire Alarm panel. Accept,

Reset functions shall be possible from the repeater panel. The user interface of Repeater Panel

5 1 shall be identical to the Fire alarm Panel. All other specification shall remain unchanged like Ea. 1,26,250.00

FACP. EN54 / Vds/UL Certification.

SITC of Addressable Heat Detectors with combination of fixed type and rate of rise of

temperature feature. Detetctor should have inbuilt isolators as per NFPA 72 style 7 wiring

requirements and have an option of both soft & hard addressing. Detector should monitor

6 150 Electromagnetic interference and report to the panel - current and average values. EMC safety for Ea. 3,888.50

detector shall be 50 V/m. Shall be EN54/ VDs/ certification.(Detectors without Inbuilt Isolators

may be considered with an additional Isolator Module per detector) EN54 / Vds/UL Certification

SITC of Intelligent Addressable Multicriteria detector with a combination of Optical and Thermal

including mounting base, auto addressing feauture as required. Detetctor should have 2 inbuilt

isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line)

for maintaining operational availability of all elements in the loop in the event of a short circuit

and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with

EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and

report to the panel - current and average values. EMC safety for detector shall be 50 V/m. Shall be

EN54/ VDs/UL certification.

SITC of Response indicator for mounting on false ceiling at the entries of the cabin for indicating

the operation for detectors in the above areas including Backbox

SITC of Addresaable Beam detector incuding mounting base along with Interface module to direct

connnect to the loop , having a coverage area with a distance of min. 10 m and max. 100 m with

extra width of up to 14 m ,Operating temperature range: -20 C to +55 C, Response sensitivity of

40%. Shall be EN54/ VDs/ certification.

SITC of Addessable WEATHER PROOF(Outdoor) Manual call point with IP rating of IP 67 and

with inbuilt isolators as per NFPA 72 style 7 wiring requirements, with flexible network structures

& necessary fixing arrangements with key complete as required. Shall be EN 54 / Vds/UL

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of Addressable Loop Powered Indoor Sounder cum Strobe with inbuilt isolators as per

NFPA 72 style 7 wiring requirements & with 32 different tone variants selection options &

11 15 adjustable sound pressure by 5 levels, the sound pressure 92.1 dB(A), with flasher having Ea. 6,565.00

Synchronized flash rate of 1 Hz and Light intensity > 2 cd, should be programmed from the panel.

Shall be EN54 / Vds/UL Certification.

SITC of Loop Powered Voice Sounder Indoor with inbuilt isolators as per NFPA 72 style 7 wiring

requirements & with 32 different tone variants selection options with 4 different voice messages in

7 languages, the maximum sound pressure 95.4 dB(A) should be programmed from the panel.

Shall be EN54 / Vds/UL Certification.

SITC of Addressable Control Module with inbuilt isolators as per NFPA 72 style 7 wiring

requirements with a maximun switching current of 1A @ 30V DC. Control module shall be used

for to activate Conventional Sounder cum Strobe/Sounders/Strobes. Shall be EN54/ Vds

Certification/UL

SITC of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring

requirements with a maximun switching current of 1A @ 30V DC. Relay Control module shall be

14 15 used for emergency control functions including shutting down Fire dampers in AHU's, tripping of Ea. 3,888.50

AHU's, Fresh air fans, Ventilation fans, tripping of Access control doors etc.. Shall be EN54/ Vds

Certification/UL

SITC of Addressable Monitor Module with one input & one output contacts, with inbuilt isolators

& with 2 monitoring features, monitoring of a line with EOL resistor ,Potential free contact

monitoring with Inbuilt isolators for flow switches, Panic Bars & other Third Party Inputs. Shall

be EN54 / Vds/UL Certification.

SITC of Fire Fighter's Master panel along with Master Handset as per the Specifications. Shall be

17 15 SITC of Fire fighters telephone jack as per the specifications. Shall be UL Listed Ea. 5,555.00

Supplying of Red colored Fire fighters telephone Handset as per the specifications. Shall be UL

SITC of 2 X 1.5 Sq.mm Fire Survival Armored Cable, for Fire Aalrm Device Looping & Power

Supply. Outer Sheth Red color.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

Section 02.00 Public Address & Voice Evacuation System

SITC of IP based Digital Public Address and Emergency Sound System Controller certified to

International standards of Emergency Sound System EN 54 and ISO 7240‑16, marked for CE and

compliant with the RoHS directive. The system shall be fully IP-network based and all system

devices shall communicate via IP, using an Audio over IP (AoIP) protocol that supports standards

AES67 for audio and using AES70 for control with optional encryption and authentication to

prevent unauthorized access, misuse and modification of data.It shall be capable of receiving

Dante and AES67 audio streams. The audio part shall support Layer 3 connections via routers

between subnets with latency of less than 10ms and synchronized outputs.The control data part

shall be guaranteed by Transmission Control Protocol (TCP) Layer 4. The system shall support

>100 simultaneous channels for music routing and making calls. A system based on a single

system controller shall support at least 120 system devices and 500 zones.The system controller

shall dynamically assign network audio channels for audio routing between system devices across

multiple subnets. The system controller shall have dual power supply inputs and power supplies. It

shall keep an internal log of fault events and call events.The system controller shall provide a

secure TCP/IP open interface for remote control and diagnostics.The system controller shall

provide front-panel LED indications for the status of power supplies and the presence of faults in

the system upto 2000 faults and provide additional software monitoring and fault reporting

features. [Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

SITC of The desktop call station with extension keypad with 12 fully programmable keys for zone

section and PA system operation. The call station and the keypad shall be certified for EN 54‑16

and ISO 7240‑16, marked for CE and be compliant with the RoHS directive.Desktop housing with

goose neck microphone. 4.3" full‑color capacitive touch display. Graphical user interface for

21 1 optimum user guidance and feedback.Status and fault indicators for voice alarm purposes.Dual Ea. 5,31,938.72

Audio over IP‑network ports for redundant network. The audio over IP should comply AES

standard for audio and AES 70 for control with optional encryption and authentication to prevent

unauthorized access, misuse and modification of data. [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of IP based Digital Class-D multi channel Amplifier 600W each with 8 channels,The

amplifier shall adapt the maximum output power of each amplifier channel to its connected

loudspeaker load, with free assignable output power per channel.EN 54 certified and ISO 7240‑16,

marked for CE and compliant with the RoHS directive.The amplifier shall have a built-in

independent spare amplifier channel for automatic fail over.The amplifier shall provide an

interface for control data and multi-channel digital audio over IP using dual Ethernet ports for

redundant network connection, supporting RSTP and loop-through cabling, with automatic fail

over to an analog lifeline input.

The amplifier shall have dual power supply inputs and power supplies.All amplifier channels shall

have independent A/B zone outputs with support for class-A loudspeaker loops.

All amplifier channels shall supervise the integrity of connected loudspeaker lines without

interruption of audio distribution.The amplifier shall provide front-panel LED status indications

for the network link, ground fault, power supplies and audio channels, and provide additional

software monitoring and fault reporting features. Audio‑over‑IP, using the high‑quality digital

audio interface, compatible with AES67 and AES 70 standards with optional encryption and

authentication to prevent unauthorized access, misuse and modification of data using an

uncompressed, high-definition digital audio format with 24-bit sample size and 48 kHz sample

rate.Digital signal processing on all amplifier channels, including equalization, limiting and delay,

to optimize and tailor the sound in each loudspeaker zone. [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

SITC of Ceiling loudspeaker 6W, ABS with clamps

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of ABS back box [Approved by Competent Authority i.e. not Below the rank of Executive

SITC of Cabinet loudspeaker, 15W, black High-fidelity music and speech reproduction

Selectable 8 ohm, 70 V and 100 V inputs

Compact yet robust ABS enclosure

Supplied with adjustable mounting bracket

Complies with international installation and safety regulations

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

26 1 SITC of Audio Source to play audio using Bluetooth, USB, DVD, FM, IP Streaming. Ea. 1,96,950.00

SITC of 2 X 1.5 Sq.mm Fire Survival Armored Cable, for PA Device Looping & Power Supply.

Outer Sheth Grey color.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of 42U 800mm X 800mm, equipment rack with all mountig accesories, power strip 2nos

28 1 with 10 sockets M type, caster wheel with lock, front glass & rear perforated door, fan unit on top Ea. 52,520.00

with 4 fans, compleate with all required shelves for mounting.

Section 03.00 IP CCTV SURVILLENCE SYSTEM

INDOOR IR DOME CAMERA

SITC of Progressive scan CMOS 4MP, 1/2.8”, 2048 x 1536, IP Bullet IR, Cameras , Up to 30 fps

29 30 @ 1080P, Progressive scan CMOS, 3 to 10mm Verifocal, Colour: 0.08 lux at 33ms, B/W: 0.015 Ea. 23,179.50

lux at 33ms, and 0 Lux with IR On Range: Adaptive IR Illumination 50 Mtrs, ONVIF Profile S,

Profile G, and Profile T Conformant, IK10,BI Directional audio, UL listed, IP66 Rated casing

(polyester polycarbonate blend) etc. PoE+ Power.

OUTDOOR IR BULLET CAMERA

SITC of Progressive scan CMOS 5MP, 1/2.8”, 2048 x 1536, IP Bullet IR, Cameras , Up to 30 fps

@ 1080P, Progressive scan CMOS, 3 to 10mm Verifocal, Colour: 0.08 lux at 33ms, B/W:

lux at 33ms, and 0 Lux with IR On Range: Adaptive IR Illumination 50 Mtrs, ONVIF Profile S,

Profile G, and Profile T Conformant, IK10,BI Directional audio, UL listed, IP66, IP67 Rated

casing (polyester polycarbonate blend) etc. PoE+ Power.

INDOOR IR BULLET CAMERA

SITC of Progressive scan CMOS 5MP, 1/2.8”, 2048 x 1536, IP Bullet IR, Cameras , Up to 30 fps

@ 1080P, Progressive scan CMOS, 3 to 10mm Verifocal, Colour: 0.08 lux at 33ms, B/W:

lux at 33ms, and 0 Lux with IR On Range: Adaptive IR Illumination 50 Mtrs, ONVIF Profile S,

Profile G, and Profile T Conformant, IK10,BI Directional audio, UL listed, IP66, IP67 Rated

casing (polyester polycarbonate blend) etc. PoE+ Power.

OUTDOOR PTZ CAMERA

SITC of Progressive scan CMOS 2MP, 1/3”, 1920 x 1080, IP PTZ Speed Dome Cameras, Up to

32 2 fps @ 1080P, 36X Optical Zoom & 10X Digital Zoom, 0.3 lux at 33ms, B/W: 0.1 lux at 33ms, Ea. 1,41,905.00

Smoked Dome, ONVIF Profile S and Profile G Conformant, IK10, UL listed, IP66, PoE+

NETWORK VIDEO RECORDER

33 1 SITC of network video recoreder of 64 Channel, for camera recording @ 25fps, full HD for 30 Ea. 2,63,610.00

Days compresion H.265.

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of Client Workstation with following configurations: Processor – Intel i7 12th Gen,

GHz,Memory – Minimum 16 GB,Hard disks – 512 GB SDD ,compatible OS for VMS, Network

Card – 10Gbit/s network card,NVIDIA Graphic card of minimum 4 GB, Dual Port card for

connecting minimum of 2 LCD Screen complete with all accessories required to complete the

installation as per project requirements.

35 1 SITC of wall mount 55" Professional Display unit Full HD/4K high resolution diplay with Ea. 1,56,550.00

3XHDMI ports, 2XUSB Ports, 1X3.5mm Jack, 1XExternal IR receiver etc.

Section 04.00 DATA , VOICE & WIRELESS ACCESS POINT SOLUTION

36 3,840 SITC of CAT6 UTP 23AWG Solid: Per Meter RMT 43.43

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying and Laying of 0.5 mm dia Annealed copper Jelly filled 50 pair armoured telephone

cable with suitable aesthetic dressing. (b) Armoured [Jelly Filled]

SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Jack Cat 6 Keystone UTP

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Face Plate - Dual (Keystone Jack,square)

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

44 5 L2+ Static Routing Ea. 31,996.80

Optional “standard mode” or “surveillance mode” management user interface

193 W PoE budget

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of 24 x 10/100/1000BASE-T ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of 20 x SFP ports

4 x Combo 10/100/1000BASE-T/SFP ports

4 x 10G SFP+ ports

6 kV surge protection on all RJ-45 access ports

Switch Resource Management (SRM) for flexible management of system resources

46 1 Redundant Power Supply (RPS) support Ea. 6,47,939.24

MPLS L2VPM/L3 VPN support

Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6

SDN-enabled switch, compatible with Openflow

10-GbE SFP+ to SFP+ 1M Direct Attach Cable [Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

SITC of Maximum distance of up to 10 km

Single-mode fiber

47 12 1000BASE-LX (IEEE 802.3z standard) Ea. 4,801.54

Duplex LC connector

MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below the rank of Executive

Supply, Installation, Testing & Commissioning Wifi6 Access Point controller for controlling upto

100WIFI access point & 500 Users simultaniously.

Supply, Installation, Testing & Commissioning Wifi6 Access Point Having 2.4GHz & 5.0GHz

Dual Band 802.11ac Wave2 Access Points with 2x2 MU-MIMO, 2 Spatial Streams 802.11b/g/n

49 20 (300Mbps) and 802.11ac (867Mbps); AP should be upgradable to Integrated Bluetooth radio; AP Ea. 65,650.00

should have 1 Gigabit port, 1 Management Console Port with License, Embaded control for

security policy is must.

SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Sr. No. Quantity Item Descriptionan Unit Rate Amount

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal

slots. Inbuilt Auto attendant facility, Minimum 15 Ea. conference, Analog extension line, Calling

GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from

Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring device, Chairman / Secretary - Do not disturb

Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back,

Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System,

(DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music

Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External

Music Input, Fax Homing, Global Directory Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ], [E] No of Extension 128, No

of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN and

Providing and erecting add on Digital line card suitable for existing system of following ports

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] (b) 16 port

SITC OF 50 Port Telephone Patch panel with RJ-45/12 termination, compleate with mounting

Supplying & erecting push button type telephone instrument having speaker phone Caller ID &

56 20 speaker phone with one touch memory (min.6 nos.)& 99 memories with display system Single Ea. 898.90

line [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

57 3 SITC OF 42U, 800mm x 1000mm server rack, with all accessories Ea. 52,520.00

58 3 SITC OF 15U, 500mm x 550 mm Wall mount network rack with all accessories Ea. 15,150.00

Section 05.00 LIGHTING CONTROL SYSTEM

59 20 SITC Of Dual Tech occupancy sensors with US & PIR sensing, the sensor shall be able to control Ea. 12,625.00

direct 10A load for lighting & parallel PFC for A/C other load. KNX compatible

SITC Of 8 Channel Lighting Controller with Bus Cableing to Sensors. With Required mounting

panel & power supply modules.

61 1,000 SITC of KNX cable laying between controller & sensors. Mtrs. 404.00

TOTAL AMOUNT OF ELV WORK

TOTAL AMOUNT OF ELV WORK

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward,

SUMMARY SHEET OF HVAC WORK

SR. NO. NAME OF PART AMOUNT

1 PART - I : HIGH SIDE HVAC EQUIPMENTS WITHOUT GST

2 PART - II : LOW SIDE WORK WITHOUT GST

3 PART - III : 5 YEAR OPERATING & MAINTENANCE CONTRACT CHARGES

TOTAL AMOUNT FOR PART I + II + III WITHOUT GST

TOTAL AMOUNT FOR PART I + II + III WITHOUT GST

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

PART : I HIGH SIDE AC PLANT ROOM EQUIPMENTS WORK

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Note - Before the delivery of these Items at site, Detailed Shop drawings / Product

submittals as per tender specifications are to be prepared by the contractor and the

same has to be approved by the consultant . Only after this approval the work has to

Supply, installation, testing and commissioning of Screw type Water Cooled Water Chilling

M/C of 200 TR actual capacity at below mentioned operating conditions with R - 134 A or

equivalent refrigerant, semihermatic / hermatically sealed screw compressor, direct / gear driven

by suitable KW Sq. Cage induction motor complete with Variable Speed Drive, water-cooled

shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser &

chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), flexible pipe connector at

condenser & chiller inlet & outlet, integral lubrication system, Microprocessor based control

panel, VSD & accessories etc. all mounted on M.S. frame. Motor shall be suitable for 415 volts ±

1 10%, 50Hz ± 5 %, three phase A.C. supply. The chilling m/c as described above shall be in line Set 2 60,61,000.00

with specifications & shall have interface card compatible with BMS system. Condenser Water

Inlet - 32.0º C. Condenser Water Oulet - 36.00º C. water flow rate - 800 US GPM Fouling Factor

(MKS) - 0.0002 Pressure Drop Max - 8.0 Meter Chiller water inlet - 11.0º C., water outlet - 6.0º C.

water flow rate - 550 US GPM Fouling Factor (MKS) - 0.0001 Pressure Drop Max - 7.5 Meter,

IKW / TR (Maximum) - 0.685.The price quoted for supply, installation, testing & commissioning

of Screw Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment

cost from works to site, loading / unloading, port clearance charges etc. as required in Indian

Rupees. ( 1 Nos. Working + 1 No. Stand By )

Condenser Water Pumps Set Supply, installation, testing and commissioning of Horizontal Split

Casing condenser water centrifugal pump sets with bronze impeller for condenser water

recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, base plate,

2 coupling guard, vibration isolators, SS Shaft, factory fitted mechanical seal, flexible pipe Set 2 4,41,408.00

connector at inlet and outlet etc. conforming to technical specification & as per following

parameters: Capacity of Each Pump shall be US GPM 800, Pump Head (Mt) 21.00, Motor HP

20.0, Minium Efficiency 80 %. ( 1 Nos. Working + 1 No. Stand By )

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Chilled Water Pumps Set Supply, installation, testing and commissioning of End Suction chilled

water centrifugal pump sets with bronze impeller for chilled water recirculation complete with

TEFC Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, vibration

isolators, SS Shaft, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc.

conforming to technical specification & as per following parameters. The chilled water pumps

shall also include the cost of thermal insulation. Capacity of Each Pump US GPM 550, Pump

Head (Mt) 36.00, Motor HP 25.0, Minium Efficiency 80 %. ( 1 Nos. Working + 1 No.

Supply, installation, testing and commissioning of Pultruded FRP structure Induced Draft

Cooling Tower 250 TR) cross/counter flow, twin/four cell, direct/ gear driven, site erected

cooling tower of capacity 250 TR based on the parameters given below and complete with PVC

Fill, Louvers, Drift Eliminator, VFD Driven TEFC Motor, Propeller Fan, PVC Sump & Steel

Ladder etc. The cooling tower shall conform to technical specifications given in the tender. The

maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than

75 dB. The cooling Tower Model shall be to suit site condition. Duty Parameters Water Flow -

US GPM Designed Wet Bulb Temperature at Ahmedabad - 28 °C Water Inlet Temperature -

°C Water Outlet Temperature - 32.00 °C Motor HP = 10 HP ( 1 Nos. Working + 1 No. Stand BY

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of Pressurised Expansion Tank for chilled water of

capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable

butile - EPDM membrane, operating pressure 10 Kg/cm², overall height of the tank shall be

limited to 3.0 meter & the tank shall be complete with necessary controls as required. Size of tank

is for guidance only & AC Contractor to quote as per actual requirement. Capacity of the

pressurised tank - 5000 Litres

Supply, installation, testing and commissioning of Air and Dirt Separators (With air release Valve

& Drain Valve - Chilled Water) as per Specifications on the return chilled water line located at

6 the primary pump suction and suitable for chilled water header pipe size and total Chilled water Set 1 2,20,000.00

flow. The separator should be complete with high capacity air vent, service valve, non return

valve, butterfly valve connection for makeup water inlet, flanges, drain valve etc.

Supply, installation, testing and commissioning of Dirt Separators (With Drain Valve - Condenser

Water Line) as per Specifications on the condensor water line located at the pump suction and

suitable for total Cooling water flow. The separator should be complete with service valve, non

return valve, butterfly valve connection for makeup water inlet, flanges, drain valve etc.

Supply, installation, testing and commissioning of DIDW centrifugal fan for AC Plant Room

Ventilation of MS construction complete with inspection window, drain plug & duly epoxy

painted (2 coats of primer & 2 coats of paint). The fan shall be suitable for V belt drive

arrangement & in bare shaft construction. The fan impeller shall have forward / backward curved

blades. The centrifugal fan motor shall be suitable for single speed TEFC squirrel cage induction

motor suitable for 415 415 volts ± 10%, 50Hz ± 5 %, three phase AC power supply with class "F"

insulation & temperature rise limited to 45 °C ambient temperature, V belt drive set comprising of

fan & motor pullys & one set of belts, slide rails, MS belt protection canvass connection at outlet

side, multilouvers damper at outlet side in MS construction with casing in 14G & louvers in 18G

construction, foundation bolts, common base frame in standard MS construction, anti vibration

mountings arrangement. The fan capacity shall be as follows:- 15,000 CFM (32mm static pressure,

5.5 KW, 1000 RPM Fan Motor, Belt Driven)

Acoustic Insulation Of AC Plant Room Supplying & fixing of acoustic insulation on four walls &

ceiling of AC Plant Room with 50 mm thick fibre glass of density 32 Kg/m³ fixed in square frame

box of size 610 x 610 mm, frame made of 24 G GI sheet of size (25 - 50 - 50 - 50 - 25 mm) coverd

with fibre glass tissue paper and finally finished with 0.5mm thick perforated aluminium sheet &

conforming specification. All vertical & horizontal joints to be sealed with 25 mm wide 1.0 mm

thick aluminium beading.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of MCC. Panel Board For AC Plant at terrace level

with required suitable for 1) Water Cooled Screw Chiller With VFD 200 TR - 02 Nos. (1W+1S) 2)

CHW Pump Sets (30.0 HP each) - 02 Nos. (1W+1S) 3) CW Pumps Sets (30.0 HP each) - 02 Nos.

(1W+1S) 4) Cooling Towers (10 HP each) - 02 Nos. (1W+1S). Supply, installation, testing and

commissioning of Cubical type sectionalised floor standing switch board by CPRI apprved firms

of 31 MVA fault capacity at 415 V complete with 4 strip, suitable Ampere capacity for total

outgoing feeders of 350 KW Aluminium Bus - Bar Electrolytic grade E-91, cable alley,

switchgears suitable for AC-23 duty & of following capacity & as per specification given in the

tender. a) INCOMER = suitable Ampere capacity manually operated draw out type 4 Pole ACB

with overload, short ckt., earth fault, protection release, with 144 mm (0 -1250 A) ammeter with

CT and selector switch, 144 mm (0 - 500 V) Voltmeter with selector switch, phase indication light

with protection fuse, on / off / trip indicating light with protection fuse. SET 01 b) Chnage Over

Switch for section A & B of 0000 A capacity, four pole ACB. SET 01 with mechanically &

electrically interlocked to avoid paralleling of the two supplies. LOT OUTGOINGS A) For 2 Nos.

140 KW Water-cooled Chilling Machine 000 A manually operated draw out type 4P ACB with

overload, earth fault protection with (0 - 800A) ammeter with three CT & selector switch, on / off

/ trip indication light with protection fuses. B) For 2 Nos. 25 HP Chilled Water Pumps 125 A TPN

MCCB with 63 A star delta starter, overload relay, start/stop push buttons, ammeter (0-125A) with

three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer &

auto / manual mode selector switch. C) For 2 Nos. 20 HP Condenser Water Pumps 100 A TPN

MCCB with 63 A star delta starter, overload relay, start/stop push buttons, ammeter (0-125A) with

three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer &

auto / manual mode selector switch. D) For 2 Nos. (10 HP - Each Tower) Cooling Towers. 63 A

TPN MCCB with 25 A star delta starter, overload relay, start/stop push buttons, ammeter (0-60A)

with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer

& auto / manual mode selector switch. E) 6 Nos.Spare feeders for each of the above feeders F) for

Ventilation Fan of 5.5 KW motor Set - 01 No.with switch gears suitable for AC - 23 duty

including making interconnection etc as required, G) outgoing for feeder for ATCS etc..

Auto Tube Cleaning System ( ATCS ) to minimise Condenser tubes fouling, scaling and debries

by using soft balls to scrub the tube walls compelete with periodical injection of balls into the

water flow system, ball collection & ball cleaning system in automatic and preset sequence duly

suiatbale for above capacity chillers.

SUB TOTAL PART : I HIGH SIDE EQUIPMENT Rs.

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

PART : II LOW SIDE WORK

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Note - Before the Delivery of these Items at site, Detailed Shop drawings /

Product submittals are to be prepared by the contractor and the same has

to be approved by the consultant .Only after this approval the work has

Supply, installation, testing and commissioning of factory fabricated 43 mm

thick Double Skinned Chilled Water Air- handling unit floor mounted

(Horizontal / Vertical to suit site) fabricated out of extruded aluminium

thermal break profile section with 0.6mm pre-plasticized / pre-coated

Galvanised steel sheet outside & 1 mm plain Stainless steel sheet inside with

blower, blower section and high efficiency blower motor TEFC EFF-1 type

suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row

cooling coil made of Aluminium finned Copper tube with coil section, pre-

1 filter section with non woven synthetic media of 10 micron particle size with

an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet

duly insulated complete with motor, belt drive etc. without face and bypass

dampers. The AHU panels shall be insulated with 43mm thick & 36 Kg/m³

density PU foam & shall have thermal break. The motor & blower assembly

shall be mounted on Aluminium extruded section rail only. The complete

AHU shall conform to standard specication. The face velocity across cooling

coil shall be limited to 152 MPM maximum. The AHU shall be as per ASPA

ASHREA Standards.

Floor Mounted AHU of 80 TR X 30000 CFM X,100 mm Static Pressure X

1.1 2500 cfm Fresh Air Intake, 6 Row deep Cooling Coil, Max. Aprx. Motor Set 2.00 6,50,000.00

rating 22.3 KW.

23 mm thick Doube Skin Ceiling Suspended Low Height AHU of 10 TR x

4,000 CFM, 65 mm Static Pressure, 4 Row deep Cooling Coil,

Sr. No. Item Descriptionan Unit Quantity Rate Amount

23 mm thick Doube Skin Ceiling Suspended Low Height AHU of 15 TR x

6,000 CFM, 65 mm Static Pressure, 4 Row deep Cooling Coil,

Supply, Installation, testing and commissioing of Decorative Chilled water

Four way Cassatte Units complete with extended insulated drain tray,

duly insulated factory assembled assembly of Ball valve, Strainer and 2 way

PIBC valves. The Cassatte Unit shall also be complete with remote operating

corded control panel having 3 speed selector switch, digital thermostate,

voltage transformer, wiring between Cassatte Unit and operating control

panel, in bulit drain pump in compact or regular sizes as per site requirements

2.1 Chilled water Cassatte Unit of 2.0 TR & 700 CFM capacity Set 1.00 65,000.00

2.2 Chilled water Cassatte Unit of 4.0 TR & 1200 CFM capacity Set 4.00 80,000.00

Supply,installation,testing & commissioning of Fan Coil Unit of GI powder

coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling

coil, aluminium filters with filter box, double sandwitched insulated tray, ball

valve with strainer & PIBC valve set, copper connection, rotary switch,

supporting arrangement, electrical wiring, digital thermostat, 3 spped slector

switch etc. The fan shall be selected for 16 mm static pressure. The complete

fan coil unit shall have acoustically lined casing & shall be in line with the

standard specification as per ASPA ASHRAE.

3.1 Horizontal Fan Coil Unit of 1.5 TR & 600 CFM capacity Set 1.00 10,640.00

3.2 Horizontal Fan Coil Unit of 2.0 TR & 800 CFM capacity Set 1.00 12,590.00

Supply,installation,testing & commissioning. of Digital Display Type

Thermostat Cum Humidistat for all AHU including temperature and humidity

4 sensor. The thermostat shall have provision of setting of space temperature Set 6.00 15,000.00

and space RH as per requirement. Unit controller shall be installed in the air

conditioned area or AHU Room.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply,installation,testing & commissioning. of Pressure Independant

Balancing Cum Three Way Control Valve in a single body equipped with

5 electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric

signal. The minimum close off Pressure of actuator must be 1.5 times shut off

head of pump as per specifications of following sizes:

5.1 Suitable for Maximum Chilled water flow of 60 GPM - 50 mm Dia. Set 2.00 41,307.00

5.2 Suitable for Maximum Chilled water flow of 72 GPM - 65 mm Dia. Set 2.00 63,828.00

5.3 Suitable for Maximum Chilled water flow of 275 GPM - 100 mm Dia. Set 2.00 1,37,371.00

Supply, installation, testing and commissioning of Inline fans with motor

complete in all respect & of following capacities. The casing of inline fans

shall be acoustically lined & shall be selected for lower noise level. Fan motor

shall have inbuilt speed controller.

6.1 400 CFM X 10 MM Static Pressure Set 1.00 20,000.00

6.2 1500 to 2000 CFM X 15 MM Static Pressure Set 4.00 30,000.00

Supply,installation,testing & commissioning. of Lift Well Pressurisation Fan

of floor / ceiling mounted Tube Axial flow fans with adjustable pitch blade,

MS casing, cast aluminium alloy impeller complete with TEFC Sq.Cage

Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C

supply with support, mountings and flexible connection etc. & of following

capacity. 2500 CFM (25mm static pressure)

Supply,installation,testing & commissioning. of Staircase Pressurisation Fan

of floor / ceiling mounted Tube Axial flow fans with adjustable pitch blade,

MS casing, cast aluminium alloy impeller complete with TEFC Sq.Cage

Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C

supply with support, mountings and flexible connection etc. & of following

capacity. 7500 CFM (25mm static pressure)

Sr. No. Item Descriptionan Unit Quantity Rate Amount

CHILLED WATER PIPING & PN-16 RATING VALVES WITH

INSULATED CHILLED WATER PIPING

Supplying, laying/ fixing, testing and commissioning of following nominal

sizes of chilled water piping plumbing inside the building with necessary

bends, elbows, tees, clamps, vibration isolators and fittings but excluding

valves, strainers, gauges etc. duly insulated with fire retardant quality

expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick

coat of cold setting adhesive (CPRX compound) wrapping with 500g

polythene faced hessain and finally applying 0.63mm aluminium sheet

9 cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as

amended up to date ) at joints repairing of damage to building etc. as per

specifications and as required complete in all respect.

Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS :

1239 and pipes size above 150mm shall be welded black steel pipe heavy class

as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto

mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of Butterfly Valves in chilled

water line as per specification given in the tender.

Supply, installation, testing and commissioning of Ball Valves with SS ball

13 and in single piece design in chilled water line as per specification given in the

Supply, installation, testing and commissioning of wafer swing check type

14 Dual Plate Non Return Valve in chilled water line as per specification given in

Supply, installation, testing and commissioning of Y type strainer with SS

Screen in chilled water line as per specification given in the tender.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of alcohal flled 'V' form

16 thermometer of approved make conforming to tender specifications. (For Nos. 18.00 1,121.00

AHUs & Chillers )

Supply, installation, testing and commissioning of pressure guage of approved

17 make of dia 150 mm conforming to tender specifications. (For AHUs, Nos. 20.00 1,264.00

Chillers, & All Pumps)

Supply, installation, testing and commissioning of automatic Air Purge / Vent

Valve confirming to tender specifications of 20 / 25 mm Dia..

Supply, installation, testing and commissioning of Condensate Drain Piping of

GI 'Medium' class complete with fittings like elbows, tees,reducers, bends, MS

flanges, supports, threading / welding, painting etc. as required conforming to

tender specifications and of following sizes.

COOLING WATER PIPING & VALVES

COOLING WATER PIPING

Supplying, laying/ fixing, testing and commissioning of following nominal

sizes of cooling water piping plumbing with necessary bends, elbows, tees,

clamps, vibration isolators and fittings but excluding valves, strainers, gauges

etc. as per specifications and as required complete in all respect.

20 Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS :

1239 and pipes size above 150mm shall be welded black steel pipe heavy class

as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto

mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of Butterfly Valves in cooling

water line as per specification given in the tender.

Supply, installation, testing and commissioning of wafer swing check type

22 Dual Plate Non Return Valve in cooling water line as per specification given

Supply, installation, testing and commissioning of Y type strainer with SS

Screen in cooling water line as per specification given in the tender.

Supply, installation, testing and commissioning of POT type strainer with SS

24 Screen in cooling water line as per specification given in the tender of 200 mm Nos. 1.00 75,500.00

Supply, installation, testing and commissioning of alcohal flled 'V' form

25 thermometer of approved make conforming to tender specifications. (For Nos. 8.00 1,121.00

Condensers & Cooling towers )

Supply, installation, testing and commissioning of pressure guage of approved

26 make of dia 150 mm conforming to tender specifications. (For Condensers, Nos. 12.00 1,264.00

Cooling towers & All Pumps)

Supply, installation, testing and commissioning of automatic Air Purge / Vent

Valve confirming to tender specifications of 20 / 25 mm Dia..

Supply, installation, testing and commissioning of 6 mm thick FRP Lining

on terrace level cooling water piping of following dia.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of factory fabricated GI sheet

29 metal ducting complete with Spliter Damper vanes as required, GI hardware,

GI supports and as per ISI specifications and as per approved shop drawings.

Supplying and fixing of acoustic lining of duct with fibre glass rigid board of

density 48 Kg/m³ sealed in fibre glass tissue paper and covered with 0.5 mm

thick perforated aluminium sheet and conforming to specification given in the

30.1 12.5 mm thick Sq.Mtr. 50.00 50.00

30.2 25.0 mm thick Sq.Mtr. 100.00 100.00

Supplying and fixing of external thermal insulation on ducts with Glass cloth

31 coated Closed Cell EPDM Rubber insulation, tape & cold adhesive as required

of following thickness.

31.2 13 mm thick Sq.Mtr. 750.00 750.00

32.3 18 mm thick Sq.Mtr. 1500.00 869.00

Supply, installation & testing of Duct / Wall mounted GI Fire Dampers

32 actuated with the help of 24 V electric actuator and as per specifications Sq.Mtr. 4.00 9,739.00

excluding actuator duly fire rates as per UL-55.

Damper Actuator Supply, installation and testing of Motorised Spring Return

Actuator for devices with control panel & temperature sensor as per UL-55.

Supply, installtion and testing of Powder coated Aluminium extruded grills /

34 Diffuser with flanges as per specifications given in tender and as per the Sq.Mtr. 100.00 10,328.00

approved colour shade.

Supply, installtion and testing of Powder coated Aluminium volume control

damper as per specifications given in tender..

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installtion and testing of 22 G GI Sheet metal Fresh air / Exahsut Air

36 Cowls with bird screen & damper as per specifications given in tender at AHU Nos. 2.00 8,500.00

Rooms for 2500 cfm.

Supply, installation and testing of multiblade box type Galvanized Sheet Steel

37 construction damper for ducts to be provided with suitable links and quadrants Sq.Mtr. 10.00 8,298.00

for control of volume of air.

Supplying & fixing of acoustic insulation on four walls & ceiling of AHU

Rooms with 50 mm thick fibre glass of density 32 Kg/m³ fixed in square frame

box of size 610 x 610 mm, frame made of 24 G GI sheet of size (25 - 50 - 50 -

38 50 - 25 mm) coverd with fibre glass tissue paper and finally finished with Sq.Mtr. 300.00 1,452.00

0.5mm thick perforated aluminium sheet & conforming specification. All

vertical & horizontal joints to be sealed with 25 mm wide 1.0 mm thick

aluminium beading.

Supply, installation, testing and commissioning of exposed Roof Insulation

with 75 mm thick extruded polystyrene of density 28 Kg/m³ & fixed with with

bitumin, GI Screw wahsers and GIM Lasing wires as per specification given in

Supply, installation, testing and commissioning of exposed Roof Insulation

40.2 with 50 mm thick faqibre glass wool wrapped in black polythelene bags and as Sq.Mtr. 1500.00 1,250.00

per specification given in the tender.

Isolator Switches With Metal Enclosure ( IP-65) 40 A 6 pole isolator switch

41 for various supply & exhaust air fan with sheet metal enclosure, rain Nos. 4.00 4,750.00

protection etc. as required to suit the site condition.

POWER & CONTROL CABLING Supply, laying, testing and

commissioning of power and control cabling as per specification given in the

tender.A) Power cabling (XLPE insulated Aluminium conductor armoured

cables of 1.1 KV Grade) including cable end termination with brass

compression glands & aluminium lugs etc as per specification. for Air

Handling Units, Vent Fan Motor & Distribution Panel.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, laying, testing and commissioning of power and control cabling as per

specification given in the tender.A) Power cabling (XLPE insulated

Aluminium conductor armoured cables of 1.1 KV Grade) including cable end

termination with brass compression glands & aluminium lugs etc as per

specification. i) For Chilling Machines 4C x 250 Sq. mm (3 Run - Rate For

Supply, laying, testing and commissioning of power and control cabling as per

specification given in the tender.A) Power cabling (XLPE insulated

Aluminium conductor armoured cables of 1.1 KV Grade) including cable end

termination with brass compression glands & aluminium lugs etc as per

specification. iv) For Chilled Water & Cooling water Pumps 4C x 35 Sq. mm

Supply, laying, testing and commissioning of power and control cabling as per

specification given in the tender.A) Power cabling (XLPE insulated

47 Aluminium conductor armoured cables of 1.1 KV Grade) including cable end RMT 50.00 1,050.00

termination with brass compression glands & aluminium lugs etc as per

specification. v) For Cooling Towers 4C x 10 Sq. mm (2 No.)

Supply, lying and commissioning of Control Cabling ( PVC insulated and

PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on cable trays).

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Earthing Strip / Wires.

49 Supply, lying and commissioning of 25 x 5 mm G.I. strip along with Cable RMT 150.00 85.00

Tray as required.

Supply, lying and commissioing of 8 SWG GI wire on surface or in recess

50 along with the exiting cable for loop earthing Including connection etc as RMT 250.00 20.00

Supply, installation, testing and commissioning of Cable Tray Supply and

installation of 16 / 14 G GI. perforated type cable tray of following sizes.

Supply, installation, testing and commissioning of Starter for Propeller Fan &

Inline fan (Single Phase) of modular type single phase motor starter up to 6A (

Rating shall be as per motor ) including 3" x 3" x 2.5" G.I. Box with modular

cover plate, conduiting and wiring from starter to fan etc as required at site.

52 NOTE: The AC contractor shall provide fire shunt relay contact in his panel Nos. 10.00 18,500.00

wherever necessary along with auto / manual mode selector switch in the

outgoing feeder for AHU Fan, Ventilation & Pressurization fan etc. to take fire

input signal (Potential Free Contact). Cost shall be included in the panel price

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of AHU & Ventilation Fan

Motor 63 A TPN MCB with 25 A Star Delta starter, overload relay, start / stop

push buttons, phase indication lights with protection fuse, on / off / trip

indication lights with protection fuse, single phase preventer & auto / manual

mode selector switch. Set - 01 Controls & interlocking accessories with

potential free contacts as required.

Supply, installation, testing and commissioning of AHU Starter Panel

Board in compartmentalised construction complete with suitable capacity

Aluminium Bus Bar ,TP MCB, DOL / Star Delta Starter, ON/OFF Push

54 Buttons, On/OFF indicating lamps, 18/20 G powder coated enclousre, internal Nos. 4.00 20,000.00

wiring, Power supply transformer for PIBC valve, Temeprature & Humidity

Display with sensors, NO/NC contacts for Plant Room Control Panel, etc.

suiatble for AHU Motor rating of 1.5 to 3.75 KW.

Supply, installation, testing and commissioning of AHU Starter Panel

Board in compartmentalised construction complete with suitable capacity

Aluminium Bus Bar ,TP MCB, DOL / Star Delta Starter, ON/OFF Push

55 Buttons, On/OFF indicating lamps, 18/20 G powder coated enclousre, internal Nos. 2.00 37,500.00

wiring, Power supply transformer for PIBC valve, Temeprature & Humidity

Display with sensors, NO/NC contacts for Plant Room Control Panel, etc.

suiatble for AHU Motor rating of 18.65 to 22.3 KW.

Supply, installation, testing and commissioning of MS FABRICATION

WORK OUT OF T SECTIONS, C CHANNEL, ANGLE, PLATE ETC.

56 FOR HVAC ITEMS SUPPORTING AND MOUNTING STRUCTURES Kg. 1552.68 90.86

complete with anti rust enemal painting,required Anchor bolts, Minor civil

work like making holes, grouting with sand cement etc. etc.

Supply, installation, testing and commissioning of PVC PIPING WORK

57 FOR TOILET EXHAUST SYSTEM complete with Bends, Elbows, Tees,

Joints, Clamps, supporting & clamptiing system, etc.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of PVC ROUND

DIFFUSER WITH VCD FOR CONTROLLED AIR QUANTITY FOR

TOILET EXHAUST SYSTEM complete fixing with Exhaust Piping with

required clamps etc.suiatbel for 150 to 200 cfm

Supply, installation, testing and commissioning of 150 MM DIA.

FLEXIBLE DUCTING / PIPING TO CONNECT ROUND DIFFUSER

WITH TOILET EXHAUST PIPING SYSTEM complete with required

Supply, installation, testing and commissioning of Tube Axial Flow Fan

duly fire rated as per local fire norms complete with hot deep galvanised MS

Sheet housing, adjustable pitch Aluminium hub & impeller, VFD driven multi

speed TEFC motor, VFD, Inlet & Outlet connection with flanges, cable entry,

mounting arrangement with vibration isolation mounts/pads etc. with Fire

rating for 2 hours at 200 Deg.C. and Noise level not exceeding 80 db. suiatble

for 16000 cfm to 32000 cfm and suiatble static pressure for Basement

ventilation work in accordance with local AMC Fire norms.& regulations.

Supply, installation, testing and commissioning of expansion / make up

water tank duly insulated with 75 mm thick expanded polystyrene and

61 made out of heavy duty PVC sheet ( Sintax type ) complete with aluminium Nos. 1.00 75,000.00

cladding of 24 G with all accessories & fittings for chilled water only of

15000 ltrs. capcity.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

Supply, installation, testing and commissioning of Miscallaneous civil

work like wall jurry, wall cut outs, trenches etc. to pass ducts, cables, pipes

etc. including with refinishing of the same to the original fnish and PCC

foundation blocks for HVAC equipments as per the requirements.

Supply, installation, testing and commissioning of 5 star rated Wall

Mounted / Cassttte type Split Unit complete with indoor unit, outdoor unit,

cordless remote controller, fabicated MS outdoor unit stand duly powder

63 coated, soft copper piping duly insulated with 18 mm EPDM Rubber sleeves

coated with UV & Fire resistant glass cloth up to 15 RMT distance, cabling /

wiring between indoor & outdoor unit, first charge of CFC free ozone friendly

refrigerent gas and oil, etc.

64.1 1.5 TR 5 star Wall Mounted Split Unit No. 2.00 51,923.00

64.2 2.0 TR 5 star Wall Mounted Split Unit No. 5.00 58,706.00

64.3 4.0 TR 3 star Four way Cassette type Split Unit No. 4.00 1,59,619.00

64.4 11.0 TR Ducatble type Split Unit for Stage Area No. 2.00 2,52,537.00

SUB TOTAL FOR PART : II LOW SIDE WORK WITH GST Rs.

SUB TOTAL FOR PART : II LOW SIDE WORK WITHOUT GST Rs.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

PART : III 5 YEARS OPERATING & 4 YEARS ANNUAL MAINTENANCE CONTRACT WORK

ANNUAL COMPREHENSIVE TYPE MAINTENANCE CONTRACT WORK

Annual Comprehensive type Maintenance Contract charges for 400 TR

Central Chilled water type AC Plant & 22 TR Split Units as per the above

BOQ including with all Spares, Consumables, Parts ( Electrical, Electronics,

Mechanical ) Compressors, PCBs, Microprocessor cards, Motors etc. complete

in all respect with periodical checking, and cleaning of all parts, filters, oiling,

greasing, refrigerant gas cahring as per OEM recommandetions & guidelines,

65 attending any break down calls at site with 6 hours and rectiifcation of the

same within 48 hours from the compalint. The AMC period starts after the

completion of 1 year Defect Liability period. The payment of AMC shall be

made on quarterly basis and after completion of each quarter after deducting

penulties if any. The contractor to ensure all critical spares parts

availbility for minimum 15 years from the date of takig over the Chiller

System by Client.

Annual Comprehensive Maintenance Chrages for FIRST YEAR after the Per

Defects Liability Period Month

Annual Comprehensive Maintenance Chrages for SECOND YEAR after the Per

Defects Liability Period Month

Annual Comprehensive Maintenance Chrages for THIRD YEAR after the Per

Defects Liability Period Month

SUB AMOUNT FOR 3 YEARS AMC WORK WITH GST Rs.

Sr. No. Item Descriptionan Unit Quantity Rate Amount

OPERATING CONTRACT WORK FOR 5 YEARS

Yearly basis Operating Charges with Two (2) skiled & experienced AC

technicians cum Operators for Central Chiller System & Split Units

during entire scheduled programmes / functions / events periods.

30.1 For First Year 12.00 35,532.00

30.2 For Second Year 12.00 37,308.60

30.3 For Third Year 12.00 39,174.03

30.4 For Fourth Year 12.00 41,132.73

30.5 For Fifth Year 12.00 43,189.37

SUB AMOUNT FOR 5 YEAR OPERATING WORK WITH GST Rs.

SUB TOTAL AMOUNT FOR PART : III WITH GST Rs.

SUB TOTAL AMOUNT FOR PART : III WITH GST Rs.

SUB TOTAL AMOUNT FOR PART : III WITHOUT GST Rs.

SUB TOTAL AMOUNT FOR PART : III WITHOUT GST Rs.

AHMEDABAD MUNICIPAL CORPORATION

Construction of Auditorium Building at TP 75 (Muthiya-Hanspura) FP 94, Naroda Ward, Ahmedabad.

BOQ For Audio & Video Work

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC Of Most powerful compact active line array loudspeakers, LF:1000W, HF:500W It delivers

139db at 65-20Khz, all from a 31.7lb Baltic birch, steel and aluminum enclosure , LF 2×6.5″ cone,

1 16.00 2″ VC Vented HF 1×1″ exit, 1.75″ VC compression AHD (Adjustable Horizontal Directivity) with 10,03,490.00 Nos

field adjustable horn flairs providing a path to multiple coverage patterns. Nom. Beamwidth:

Vertical: 10°, Horizontal – Narrow 80° – Wide 110° – Asymmetrical (95° left or right of center)

Flybar Kit like Flybar & Groundstack Adapter, Stinger w/Link Bracket , M20 Mount Adapter

Pole Mount Adapter

SITC Of DUAL 18 INCH SELF-POWERED SUBWOOFER Power Handling 1400W , acoustical

design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all

3 4.00 output levels. Integrated Dante™ networking (with loop-thru) on all models including Analog 11,15,132.00 Nos

redundancy capability. Frequency Response 27 Hz -125 Hz, Max SPL 141 dB (Half Space),

Operating Mode Single-amp LF; DSP w/ Dyn0™, Subsystem 2 x 18 in cone, 3 in voice coil

SITC Of 2-Way Full-Range Dual-Woofer LoudspeakerUltra compact multipurpose, 250W@8ohms

, vast range of fill applications Weather protection and transformer options Frequency Response

4 3.00 75hz-20khz, Max SPL 127dB, Operating Mode LF/HF, DSP w/ EAW Focusing & DynO 3,01,633.50 Nos

Subsystem LF Transducer – 2×5.25″ Cone, 1.25″ VC HF Transducer – 1×1-in exit, 35mm voice

coil compression driver, Horn loaded

SITC Of Amplifiers is the perfect match for any externally-powered loudspeaker• 4-input,

channel amplifier 2500W/ch with 4Ω nominal load, 5000W/bridged ch-pair with 4Ω nominal load

, AES3 and Dante™ input.Greybox-enabled ,Engineered specifically to load GreyboxesTM,

incorporates high performance amplification, DSP (including FocusingTM and DynOTM) and

Dante networking into a compact rackmount electronics package.Multiple power levels and

channel, front panel with quick setup functions,

SITC Of 2-WAY SELF-POWERED LOUDSPEAKER bi-amplified electronics (1500W) featuring

signature DSP including Frequency Response 50 Hz – 20 kHz, Max SPL 138dB, Operating Mode

Bi-Amp LF, HF subsystem 15 in Cone, 3 in Voice Coil 3 in Voice Coil Neodymium Compression

SITC Of 2-WAY SELF-POWERED LOUDSPEAKER portable and lightweight wooden enclosure.

onboard bi-amplified electronics (1500W) featuring signature DSP including Focusing and DynO,

Frequency Response 55 Hz – 20 kHz, Max SPL 135dB, Operating Mode Bi-Amp LF, HF 12 in

Cone, 2.5 in Voice Coil 1.4 in Voice Coil Compression Driver, 1 in Exit

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC Of LOUDSPEAKER MANAGEMENT SYSTEM professional-grade digital speaker

management system, designed to deliver precise control and advanced audio processing for multi-

8 2.00 speaker environments. Featuring an interactive LCD and an intuitive embedded GUI, it enables 1,83,563.00 Nos

quick, efficient parameter adjustments and system management. Equipped with a stable, linear-

phase 512-tap custom FIR filter,4 IN 8 OUT

SITC Of Active loudspeaker 30 W RMS. 6.5'' Woofer + 1'' Tweeter. LF 6.5" Woofer ,HF 1"

SITC Of Digital Mixing Console, Compact is a Dante-equipped versatile digital mixing console

with unparalleled sound quality, ease of operation, and high reliability that make it perfect for a

wide range of applications. mixer Compact is configured with 12 + 4 faders and a 1 x 12” + 1 x 7”

10 1.00 multi-touch screen, and a rack-mountable with an optional RK1 rack mount kit , input mixing 26,73,750.00 Nos

channels: 72 mono, Buses: 48 Mix + 12 Matrix + 2 Stereo, Display: 12.1" multi-touch screen x

7" multitouch screen x 1, Faders: 16 (12 + 4), Analog I/O: 16 inputs / 16 outputs ,Dante: 144 in /

144 out, AES/EBU: 1 out, Slot: PY Slot x 1 ,USB Audio Interface: 18 in / 18 out

SITC Of I/O rack is compatible consoles as well as the RIVAGE PM series. It features 32 analog

inputs, 16 analog outputs, and eight digital AES/EBU outputs. connects directly to Dante digital

audio networks, allowing flexible system configuration. Dual power supply units are built in for

11 1.00 high reliability, and a character/graphic display offers easy visual confirmation. 32 analog inputs 14,26,000.00 Nos

and 16 outputs, and 8 digital outputs. Redundant connections are supported with primary and

secondary connectors. Daisy chain connections are also supported. Comprehensive display and

local control of gain and other parameters. Dual power supply units are built in for high reliability.

SITC Of 32-Channel Premium Mixing Console, Serious Capacity for Live Sound & Installations,

12 2.00 24 Mic Inputs with 48V Phantom Power and HPF per Channel , 32 Line Inputs (24 mono and 4 2,05,850.00 Nos

stereo), 6 AUX Sends + 2 FX Sends , 4 GROUP Buses + ST Bus, 2 Matrix out, 1 Mono out

SITC Of Dual Channel Wireless Handheld Microphone system with Built in AFS(Automatic

Frequency Selection) technology,Should have UHF operating mode with Frequency range of 522 -

930Mhz or better, Should have operating bandwidth 134 MHz or better, Anti Interference

technology ensures Noiselock Squelch effectively blocks Stray RF or better, Microphone

Frequency Response of 45Hz to 18KHz or better, Should have Signal to noise ratio less then

104dB or better, RF output Power of 10/40mW or better, Should have maximum 24 set can be used

simultaneously by using multiple frequency bands in one venue, Should have die cast metal body,

Microphone element Dynamic or better complete with standard accessories required as per tender.

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC Of Dual Channel Wireless Lavellier Microphone with Built in AFS(Automatic Frequency

Selection) technology, Should have UHF operating mode with Frequency range of 522 -930Mhz or

better, Should have operating bandwidth 134 MHz or better, Anti Interference technology ensures

Noiselock Squelch effectively blocks Stray RF or better, Microphone Frequency Response of 45Hz

to 18Khz or better, Should have Signal to noise ratio less then 104dB or better, RF output Power of

10/40mW or better, Should have maximum 24 set can be used simultaneously by using multiple

frequency bands in one venue, Should have die cast metal body .Microphone element should

unidirectional capsule or better complete with standard accessories required as per tender.

SITC Of Vocal Dynamic Microphone Categories: Dynamic Microphone Capsule Type,Polar

15 4.00 Pattern Cardioid Unidirectional ,Frequency Response 50Hz - 14KHz (+- 3dB),Sensitivity -58 dB 9,177.00 Nos

(1V/Pa) Output Impedance600 Ω , Max sound pressure level 140dB (1KHz at 1% T.H.D)

SITC Of Electret-condenser microphone features a cardioid polar pattern, ideal for capturing sound

primarily from the front while minimizing noise from the sides and rear. Its frequency range spans

from 80Hz to 18,000Hz, covering a broad spectrum of audio frequencies. With an open circuit

sensitivity of 55dB±3 (0 dB=1V/microbar 1000Hz indicated by open circuit), it effectively captures

sound with clarity and precision. The microphone has an impedance of 100+30% Ohms at 1000Hz.

It can handle a maximum input sound level of 115dB SPL (Sound Pressure Level) at 1KHz with

1% Total Harmonic Distortion (T.H.D.), providing distortion-free recording even at high sound

16 4.00 pressure levels. The dynamic range is 82dB at 1KHz at maximum SPL, ensuring detailed audio 52,583.75 Nos

capture across various sound levels. The microphone offers a signal-to-noise ratio of 61dB at 1KHz

with 1Pa, allowing for clear audio reproduction with minimal background noise. It operates on

phantom power ranging from 11-52V DC, with a typical current draw of 2mA. Control features

include a membrane-touching switch, with ON/OFF switch function selectable between Push-To-

Talk (PTT) and Push-To-Listen (PTL). Additionally, it offers a bass filter switch with options for

Flat and Roll-Off settings, providing flexibility in audio capture depending on the recording

environment and desired sound characteristics.

Antenna Distribution System by redefines wireless microphone setups with its advanced four-way

antenna distribution system. By effectively mitigating signal dropouts caused by interference, it

17 2.00 ensures seamless audio transmission to multiple receivers. With its integrated power supplies 4,45,625.00 Nos

guaranteeing consistent performance, the ADS stands as an indispensable choice for professionals

seeking reliable and efficient wireless solutions. for 1 set

Overhead microphone delivers clear, accurate audio with interchangeable cartridges and an

unobtrusive, bright white or black design. Wide dynamic range and frequency response for accurate

18 8.00 sound reproduction across the audio spectrum, ransducer Type Condenser 48,876.15 Nos

Polar Patter Cardioid, Frequency Range (Hz)50

-(kHz)17, Sensitivity dBV/Pa Cardioid: -35.00, Impedance (Ω) Rated: 150 / Actual:

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC Of Boundary microphone provides high-quality sound for a wide range of applications due to

its interchangeable condenser cartridge. It features programmable, silent membrane switches, LED

indicators, and a low-profile design. Polar Pattern Cardioid, Frequency Range From (Hz)50- (kHz)

17 Sensitivity dBV/Pa Cardioid: -30.00, Impedance (Ω) Rated: 150 / Actual:

SITC Of Gooseneck, 18" with cardioid nterchangeable cartridges provide the right polar pattern for

20 4.00 every application Locking flange mount for permanently securing microphone to surfaces, Snap-fit 40,003.90 Nos

foam windscreen Shock mount provides over 20 dB isolation from surface vibration noise

SITC Of Vocal Microphone Neodymium magnet for high signal–to–noise output, Hardened steel

mesh grille that resists wear and abuse

SITC Of Dynamic Vocal Microphone Frequency response tailored for vocals, with brightened

22 3.00 midrange and bass rolloff Uniform cardioid pickup pattern isolates the main sound source and 20,598.80 Nos

minimizes background noise

23 10.00 SITC Of Vocal Microphone Dynamic cartridge with cardioid polar pattern 4,179.10 Nos

SITC Of Drum Microphone Kit is a complete package of professional quality microphones,

designed to provide excellent sound for full drum kit performance and recording. Included in the

24 2.00 Kit are one kick drum microphone, three drum microphones, one instrument microphone and two 82,098.50 Nos

instrument microphones, along with three drum mounts, seven XLR-XLR cables, and a carrying

SITC Of 32 U Hight 600x800 W x D Rack with A full range of accessories can be loaded with a

full security system to prevent unauthorised access to vital equipments within the cabinet,

25 1.00 Functional cable management all along the height, Direct mounting of fan on the top cover allows 52,244.50 NO.

maximum height utilization, Canopy fitted on the top cover prevents ingress of dirt, dust and water

inside the cabinet.

26 2.00 SITC Of Popup Box with Hdmi, VGA, Power 20,897.80 NO.

27 4,200.00 SITC Of 2 core Audio cable 226.55 Mtrs.

28 6,000.00 SITC Of Speaker Cable 2.5 sqmm, High-Conductivity Copper Cable Twisted Jacket Con. 277.15 Mtrs.

29 300.00 SITC Of Audio Connector 315.10 NO.

30 28.00 SITC Of Stage box For mic input par box 4 & 6 input 5,074.95 NO.

SITC LED Par RGBW High bright luminaire provided with 54x3W LED’s of High quality 54x3W

LED PAR Light used as a Effect Light, Spot Light and Strobe Light etc. with below specifications:

, Lamp: 54X3 WRGBW LED (12R+18G+18B+6W),Max. Power consumpsion: 160W , Power

and DMX: Loop in and loop out

SITC of High quality POINTEY Moving Head 280w Beem-Sport -Wash (BSW) light used as a

32 8.00 special effect light providedwith high precision gobos and colors for entertainment lighting etc. 1,56,733.50 Nos

with below specification: Lamp: Philips / Osram MSD Platinum 10R, 8000K MAX.

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC of LED BLINDER LIGHT WITH FLICKER-FREE, SPECTATOR LAMP , USING FOUR

RGB , WARM WHITE (3200K) OR COOL WHITE (5600K) COB LED BEADLETS. LAMP :

PCS 100W COB LED, NO UV RADIATION ,BEAM ANGLE : 60°, CCT : 3000K/4000K/6500K,

33 12.00 LIFE TIME : 50000 HRS,· DIMMER : 0-100% LINEAR LIGHT DIMMERING , STROBE : 0-30 25,226.40 Nos

F/S, RANDOM OR PULSE, SPEED ADJUSTABLE, CONTROL MODE : DMX512, AUTO,

SOUND, MASTER-SLAVE, DMX CHANNELS : 8 CHANNELS , DISPLAY : LCD DISPLAY

INPUT VOLTAGE : AC 100-240V 50-60HZ, POWER : 400W

SITC of High quality 200W LED COB Warm White Light provided with 3000K CCT, Power loop

34 10.00 in and loop out arrangement, high quality COB lens source, wide beam angle, CRI, TLCI values 7,910.85 Nos

above 95, DmX and manual control option with black powder coated matt black finish paint.

SITC of motorized automatic stage Lighting Bar with Up to 70ft up down with all required

Accessories like Pipe, Motors min. 3 hp, Wires,cable ,Starter and clamping. Which to be used as up

to 16m lighting bar as instructed bu engineer incharge and frill bar made of SCH-40 NB dual berrel

of 3.68 mm thickness along in from of tripod structure(no sag ) with 3HP/4HP 1PH/ 3 PH AC

35 4.00 motor with DC brake as per all weight load requirement. Necessary pully, guide pullys GI wire 4,57,700.00 Nos

rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fibre core at

winding drum. Specially designed compact worm gear box upper and lower limit controller

requisite cable trunking arrangement ensuring all the cable from C track to the lighting bar to be

SITC of Connectors like DLX,, XLR,(Male /Female) with required all accessories to complete

SITC of DLX /XLR DMX signal cable for DMX network. 5/3 Core DmX Cable with sheathed

37 250.00 protection, low noise and twisted pair cable with 0.2mm conductor protected and insulated with the 193.20 Mtr

SITC of DmX Out Junction boxes provided with 5/3 Pin XLR Female connector locking type

having fabricated box made up of MS sheet .

SITC of DmX Loop Junction boxes provided with 5/3 Pin XLR Male & Female connector locking

type having fabricated box made up of MS sheet

SITC of XLR Loop Cable 1.5 to 2 Mtr length (Ready to use for Connect) - DmX Loop cable

40 75.00 Mtrs length provided with male female connectors 5 /3 Pin configuration, duly soldered and 2,096.45 Nos

provided with 5 Core DmX flexible low resistance cable sheathed protection.

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

SITC of LED MOVING ZOOM WASH 19 PCS 15W HIGH BRIGHTNESS RGBW LED

BEAM ANGLE : 8°-50° CCT : 2700-6500K, LIFE TIME : 50000 HRS, EFFECT : 3 RING

CONTROL WITH BUILT IN PROGRAMS & MACRO EFFECTS, DIMMER : 0-100%

LINEAR LIGHT DIMMERING, · STROBE : 0-20 F/S, RANDOM OR PULSE, SPEED

ADJUSTABLE, · PAN & TILT : PAN- 540° (16-BIT) TILT- 270° (16-BIT), CONTROL MODE

: DMX512, AUTO, SOUND, MASTER-SLAVE , CONTROL CHANNEL : 16/24 CHANNELS

DISPLAY : LCD DISPLAY200W LED Fresnel Spot light 3200K provided with Zoom manual

beam angle adjustment from 10 ~ 50 Degree, high quality german lens

SITC Of 2010 DMX CONTROLING CONSOL Bulit-in memory, Internal Flash Drive, similar in

functionality to a hard disk but faster and more rugged. Provides enough storage for:- The entire

Fixture Library of More than 3000 kinds of 100 file. Improved Patch selection method. The new-

fixture selection mode(row fixture fader selection) 2048 channel. 60 Faders. 15 playback.

42 1.00 Fixture. 240 Dimmer centralized control channel. Theater Mode and Playback. Graphics geherator, 5,60,050.00 Nos

can quickly generate graphics and effects. 15 playback laders can control 450 memory. running

lights or CUE list Trigger midi, bass, tenor,treble voice of Including the VGA output for external

display. Increase the USB memory, it can store more than one set of library files and documents

SITC of Industry Standared dimming / dimmer Rackmount 12channel (12chx4KW) DMX Dimmer

43 1.00 pack with following features and Specifications: Features: Automatic frequencysensor candetect 84,934.40 Nos

powerfrequency(45Hz–63Hz) indifferentareas &stabilizes the dimming output.

SITC of DMX Data RDM Splitter: 1 x IN to 8 OUTPUT DMX-512 Data Splitter Unit, with Opto-

44 2.00 Isolated outputs ;suitable both for Dimmer & Intelligent Lights,Size: suitable to 19” rack , along 29,107.65 Nos

with work for cables termination for Mains I/P & O/P,XLR Cable etc

SITC of Dimmer Rack: 19" Rack 9 U high, suitable to house 6 Nos. for dimmer splitter packs ;

wall Mount / c/w wheels ;Front Door with Toughened Glass quality Removable side panels with

ventilation provision Castor wheels set of 4 with front wheels Brake provision ,Adjustable

45 1.00 mounting slots ,Cable insertion on Top & Bottom panel to provide easy cable entry,Top section 52,020.25 Nos

with cooling Fan ,Compatible with 19" International standards ,240VAC Power socket strip as per

standard with Required internal wiring for Power Link cables for Mains I/P to all dimmers to be

provided from nearst DB /Panel as per Sugession by Client/Consultant.

PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS

size 3c x 2.5 sq mm.

Total Amount of S.I.T.C. of Audio & Video Work

Total Amount of S.I.T.C. of Audio & Video Work

PART - A OPERATION

Quantity Item Description Rate Unit Total Amount

Quantity Item Description Rate Unit Total Amount

Providing experienced Operator : Providing experienced Operator with his personal identity card

necessary for operation of Complete Audio-Video and Stage Light system for Auditorium hall in

1 Two Shifts . time Morning 9:00 am to Night 1:00 am OR as per instruction of Engineer In charge

for 365 days.Including reliver.Operator should have experience in Audio-Video -stage lighting

system operating of 2 years.

1.1 12.00 Total 2 (Two) Operators for 1st year (one person per shift) - During DLP 45,762.71 Months

1.2 12.00 Total 2 (Two) Operators for 2nd year (one person per shift) - During DLP 48,050.85 Months

1.3 12.00 Total 2 (Two) Operators for 3rd year (one person per shift) - After DLP 50,453.39 Months

1.4 12.00 Total 2 (Two) Operators for 4th year (one person per shift) - After DLP 52,976.06 Months

1.5 12.00 Total 2 (Two) Operators for 5th year (one person per shift) - After DLP 55,076.60 Months

Providing Helper : Rates for providing Helper with his personal identity card necessary as

mentioned below for operation for Complete Audio-Video and Stage Light system for Auditorium

2 hall in Two Shifts. time Morning 9:00 am to Night 1:00 am OR as per instruction of Engineer In

charge for 365 days.Including reliver. Helper should have knowledge of Audio-Video-stage

lighting system

2.1 12.00 Total 2 (Two) Helpers for 1st year (one person per shift) - During DLP 32711.71 Months

2.2 12.00 Total 2 (Two) Helpers for 2nd year. (one person per shift) - During DLP 34,347.46 Months