PROVISION OF DEFICIENT SINGLE LIVING ACCN

Amount

Total amount of Sch 'A' part-I ( Buildings/Structures)

Total amount of Sch 'A' part-II (Excavation, earthwork,Site clearance & Develoment)

Total amount of Sch 'A' part-III (Internal Water Supply)

Total amount of Sch 'A' part-IV ( Internal Electrification)

Total amount of Sch 'A' part-V ( External Water Supply)

Total amount of Sch 'A' part-VI ( External Electric Supply)

Total amount of Sch 'A' part-VII ( Road/Path/Culvert/Hardstanding)

Total amount of Sch 'A' part- VIII (Sewage Disposal)

Total amount of Sch 'A' part- IX (Area Drainage)

Total amount of Sch 'A' part- X (Compound wall and Gate)

Total amount of Sch 'A' part- XI (Demolition/Dismantling)

Sch 'A' Part- XII (MISCELLANEOUS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Boring for cast-in-situ bored piles of 600mm dia to any depth through any type of soil/strata by DMC method using bentonite slurry including removal of bored materials to place outside MD land all as specified and as directed Note:-The rate shall include mobilisation,erection,dismantling and demobilisation of equipment for pile boring including all labours and material. Nothing extra shall be payable for mobilisation of equipment seperately.

RCC with ready mix concrete(RMC) M30 grade with min 400Kg cement per cum in cast in situ bored pile of any length/any sections complete all as specified and as shown on drg including non destructive integrity test on all pile as per IS 2911 part IV.Note:-(i) Reinforcement will be measured and paid separately under relevant items

RCC with ready mix concrete(RMC) M30 grade in pile cap , grade beam & tie beam complete all as specified and shown on drg. Note:-(i) Reinforcement will be measured and paid separately under relevant items

CRS/HCRS/CRM TMT bars in reinforcement 10mm dia and over including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and shown on drgs as in Piles.

CRS/HCRS/CRM TMT bars in reinforcement 10mm dia and over including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and shown on drgs as in grade beams, tie beam,slab and pile caps.

CRS/HCRS/CRM TMT bars 5mm to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and shown on drgs as in Helicals/stirrups of piles.

CRS/HCRS/CRM TMT bars 5mm to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and shown on drgs as in stirrups of grade beams.

PCC (1:4:8) type D2 using 40mm graded stone aggregate for concrete layer below pile caps/grade beams and foundation complete all as specified and shown on drgs.

Providing testing equipment & load and testing of 600mm dia bored pile (Initial Load test) all as per IS including removing the testing equipments from site after testing is completed all as specified and directed..

Providing testing equipment & load and testing of 600mm dia pile (Routine Load test) all as per IS including removing the testing equipments from site after testing is completed all as specified and directed.

Conducting standard penetration test all as per IS-2131 at levels and locations as directed for 600mm dia cast in situ bored piles all as specified and as directed.

Excavation in trenches not exceeding not exc 1.5 wide and not exc 1.5m deep, not exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and directed.Note:- Rate shall be include for excavations in any type of soil including bailing out/pumping out water on account of spring/rain or any other causes using any method as required and as directed by Engineer-in-Charge for pile caps/grade beam.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exceeding 1.5Km but not exceeding 5Km and deposited where directed at a level not exceeding 1.5meter above the starting point complete all as specified and directed

Formwork to sides of pile caps , grade beams rough finished surface of concrete flat all as specified .

INTERNAL ELECTRIFICATION:Supply and fixing ceiling fan 1200mm sweep copper wound having minimum 5 star rating , including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from ceiling rose/ connector to fan all as specified and as directed by the Engineer-in-Charge.Model :- Fusion 50 Make Havells or equivalent from list of makes.

Supply and fix Exhaust fan 250 mm sweep 230 Volts AC 50 Hz PVC body with copper wound all as specified and as directed by the Engineer-in-Charge.

Supply and fix LED Tube light 1X22 Watt universal battern type with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor color of sheve matching to fitting and connecting frpm ceiling rose to fitting incl lamp complete all as specified and as directed by the Engineer-in-Charge. Note:(a) Fitting: Havells Cat Part No REGALBATTERNT8UPTO1X22WSSBSWH or equivalent make of CG/Philips.(b) Lamp: Havells Cat Part No CRYSTAL1213T8DSTL20LED865SGLASS or equivalent make of CG/Philips.

Supply and fix Sleek LED light 1X10 Watt 2 feet with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor color of sheve matching to fitting and connecting frpm ceiling rose to fitting complete all as specified and as directed by the Engineer-in-Charge. Note:Fitting WITH LAMP: Havells Cat Part No LUMILINEPLUSBS10WLED865SPCSS or equivalent make of CG/Philips.

Supply and fix Sleek LED mirror light 1X10 Watt with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor color of sheve matching to fitting and connecting from ceiling rose to fitting complete all as specified and as directed by the Engineer-in-Charge. Note:Fitting WITH LAMP: Havells Cat Part No LUMILINEPLUSBSI0WLED865SPCSS or equivalent make of CG/Philips.

Supply and fix Decorative wall light fitting with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor color of sheve matching to fitting and connecting from ceiling rose to fitting incl lamp complete all as specified and as directed by the Engineer-in-Charge.Note: (a) Fitting : Havells Cat Part No LHFHCHEITLIW020 or equivalent make of CG/Philips. (b) Lamp: Havells Cat Part No LHLDERHEMD8RX010 or equivalent make of CG/Philips.

Supply and fix street light new generation energy saving and environmental friendly long life LED street light made of pressure die cast alluminium housing with high power LED as lighting source and lens embded PC cover having TOP OPENINMG seperate driver compartment with IP66 protection and impact resistance of IK 07 complete with and including wall mounted bracket fabricated out of 40mm GI pipe light grade bend to shape1.5 mtr long and two nos wall mounting clamps using 25x4mm thick MS strip bend to shape and welded with pipe to form solid structure and one run of 1sqmm PVC insulated multistranded copper cunductor wire conecting pvc terminal/ Ceiling rose up to fitting all as specified and as directed by the Engineer-in-Charge. (Make Havells 25W LED IP66 security light Model No.ENDURAPEARSL25WLED757SASYTOPCor equivalent make of CG/Philips).

Supply and fix MCB TP 63 A 415 volts10 kA with chareterestic "C" Curve all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB TPN 63 Amps 415volts 10 kA with chareterestic "C" Curve all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SPN 6-32Amps, 240V,10 kA with chareterestic "C" Curve all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SP 6-32 Amps ,240V,10 kA with chareterestic "C" Curve all as specified and as directed by the Engineer-in-Charge.

Material and labour for Submain wiring with 2.5 Sqmm two single core(for phases and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 2.5Sqmm insulated unsheathed PVC insulated multistranderd copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC conduit ISI marked with accessories all as specified and as directed by the Engineer-in-Charge. (Note: 03 runs of 2.5Sqmm and one run of PVC concealed conduit shall be measured as one run only

Material and labour for Submain wiring with 4Sqmm two single core(for phases and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 4Sqmm insulated unsheathed PVC insulated multistranderd copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC conduit ISI marked with accessories all as specified and as directed by the Engineer-in-Charge. (Note: 03 runs of 4Sqmm and one run of PVC concealed conduit shall be measured as one run only

Material and labour for Vertical type double door DB TPN 4 way with IP 43 protection, shrouded neutral bar and earth termination and including 1No MCCB 4 pole 100Amps 25KA, Ics=Icu=100% as incomer all as specified and as directed by the Engineer-in-Charge.

Material and labour for Vertical type double door DB TPN 4 way MCB incomer with IP 43 protection, shrouded neutral bar and earth termination and including 1No TPN 63Amps MCB 4 pole 25KA, Ics=Icu=100% as incomer all as specified and as directed by the Engineer-in-Charge.

Supply and fix Decorative wall mounted bed side lamp fitting with and including 3watt LED 6000K complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Vertical type double door DB TPN 4 way with IP 43 protection, shrouded neutral bar and earth termination and including 1No MCCB 4 pole 63Amps 25KA, Ics=Icu=100% as incomer all as specified and as directed by the Engineer-in-Charge.

Supply, Install and commissioning of electronic water purifier system(single phase with ozone technology of capacity 80ltr/hr with normal, hot and cold water outlet with inbuilt RO+UV technology with all accessories and making water supply and electric connection complete all as specified and as directed by the Engineer-in-Charge. make:- OZONE water purifier system/Best docter water purifier/Kent.

Supply and fix Rigid non-metallic PVC conduit medium grade 20mm dia duly concealed in wall/roof/floor exclusive of terminal boxes but inclusive of all conduit accessories complete (for telephone connection)all as specified and as directed by the Engineer-in-Charge.

Supply and fix Rigid non-metallic PVC conduit medium grade 25mm dia duly concealed in wall/roof/floor exclusive of terminal boxes but inclusive of all conduit accessories complete(for TV connection) all as specified and as directed by the Engineer-in-Charge.

Supply and fix GI flush box 1/2 module all as specified and as directed by the Engineer-in-Charge.

Supply and fix TV socket 1 module all as specified and as directed by the Engineer-in-Charge.

Supply and fix Tele socket 1 module all as specified and as directed by the Engineer-in-Charge.

Supply and fix Inner and outer modular cover plate all as specified and as directed by the Engineer-in-Charge.

Supply and fix ceiling fan 1400mm sweep copper wound including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size .5sqmm from ceiling rose/connector to fan all as specified and as directed by the Engineer-in-Charge. model : SPARTZ make of Havells /Crompton/Orient

Internal Water Supply :- Supply and fix Stop cock 25mm bore with wall flange ceramic disc cartridge with plain knob complete of make Jaguar cat part No CQT-24081 or equivalent in Zoloto/Leader complete all as specified and as directed.

Supply and fix Stop cock angular 15mm bore with wall flange complete of make Jaguar Cat part No CQT-23059 or equivalent in Zoloto/Leader all as specified and as directed by the Engineer-in-Charge.

Supply and fix bip tap with wall flange complete of make Jaguar Cat part No CQT-23047 or equivalent in Zoloto/Leader all as specified and as directed by the Engineer-in-Charge.

Supply and fix stop cock long body combination of exposed part kit of consealed stop cock with fitting sleave, operating knob, adjustable wall flange and regular body consealed stop cock suitable for 15mm pipe line with protection cap complete all as specified and as directed by the Engineer-in-Charge. Make Jaguar cat part No CQT-23082K and ALD083 or equivalent in Zoloto/Leader

Supply and fix hot water braided pipe 450mm long with two 15mm nuts and rubber washer without nipple complete all as specified and as directed by the Engineer-in-Charge. Make Jaguar cat part No ALD805B or equivalent in Zoloto/Leader

Supply and fix Health faucet/ hand shower with 8 mm dia, wall hook and easy flexible tube in crome finish1.5m long with nuts complete all as specified and as directed by the Engineer-in-Charge. Make Jaguar cat part No ALD573 and SHA571 or equivalent in Zoloto/Leader

Supply and fix over head shower rose 100mm dia round shape single flow ABS body chrome plated wirh grey face plate and Rubi/ cleaning system and shower arm casted120mmlongheavy body round shape for wall mounted shower with wall flange complete all as specified and as directed by the Engineer-in-Charge. Make:- Jaguar cat part No OHS1989 and SHA-487 or equivalent in Zoloto/Leader

Supply and fix 3 way wall mixer tap wall mounted 3 in 1 system with provision for over head shower with 115mm long bend pipe on upper side connecting legs & wall flanges, complete all as specified and as directed by the Engineer-in-Charge. Make:- Jaguar Cat part No CQT 23073UPR or equivalent in Zoloto/Leader

Supply and fix voltage stabilizer automatic operation single phase naturally air cooled indoor type and designed for input variation between 170volt to 250volt with output voltage stabilized at 230volt with accuracy of + 2.5% and of capacity of 1KVA complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCCB 100Amps, 4pole, 25KA, 415volt, 50Hz shall be enclosed in and including suitable sheet metal enclosure made out of 3mm thick CRCA sheet, outdoor type duly powder coated with hinged type door and necessary locking arrangement including knockout holes for incoming and outgoing cables and making necessary fixing arrangement on existing LT panel board by providing MS flat iron frame, bolts etc including cable connection with aluminium lugs and sheet glands complete all as specified and as directed by the engineer-in-Charge.

ROAD/PATH/HARDSTANDING: Material and labour for 150mm thick WMM in two layers(75mm each)watered, rolled and consolidated to required gradient and chamber to form a true surface(Road) complete all as specified and as directed by the engineer-in-Charge.

Material and labour for 75mm thick WMM watered, rolled and consolidated to required gradient and camber to form a true surface(for hardstanding)complete all as psecified and as directed by the Engineer-in-Charge.

Material and labour for Machine cut granite stone 600x600x40mm of approved colour and type laid over sand cushioning etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Planting Mexican grass in approved earth including providing manure, in joints of granite slab complete all as specified and as directed by the Engineer-in-Charge.

Sewage Disposal:- Material and labour for DWCPE pipe 180mm outer dia laid and jointed complete all as specified and as directed by the Engineer-in-Charge.

External Water Supply:- Material and labour for Construction of brick masonry valve chamber of Internal dimensions 900x900x900mm, bottom floor of the pit shall be constructed in PCC 1:3:6 type C1 using 20mm graded stone aggregate 15mm thick with 20mm stone aggregate , inner and exposed surfaces and bottom floor of the pit should be plastered in cement mortar 1:4, 15mm thick. The top cover of the pit shall be made out of MS sheet min 3mm thick with angle iron frame made out of MS angle 40mm x 40mm x 6mm with 2Nos steel hinges and locking arrangements duly painted with two coats of synethetic enamel paint over one coat of red oxide primer all as specified and as directed.

A2Z ENGINEERS AND PILE FOUNDATIONS