SR TO INSPECTION OF TECHNICAL COMMITTEE, EXECUTION OF ESSENTIAL SCIENTIFIC REPAIRS, REPLACEMENT OF GARVAGRIHA JALLY, CONSERVATION WORK OF GARVAGRIHA, JAGAMOHAN, NATAMANDAP AND BHOGAMANDAP DURING RATHAYATRA-2025 AT SHREE JAGANNATH TEMPLE PURI

Amount

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .Note: (1) The elevational area of the scaffolding shall be measured for payment purpose .(2)The payment will be made once only for execution of all items for such works.

Finishing wall with acrylic smooth exterior paint of required shade (old wall two or more coat applied @1.67 ltr/10sqm on existing cement paint surface

Removing decayed enamel painting by scarping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.

Painting with synthetic enamel paint of approved brand & manufacture of required color to give an even shade (One or more coat coats on Old work)

Provision for carefully removing dust & dirt from the walls and stainless steel trusses in ground floor & first floor by way of dry wash etc. complete as per the direction of Engineer-in charge

Petty patch stone mending wherever required in stone masonry & floor of Garvagriha, Jagamohan , Bhogamandapa & other places with epoxy mortar in the ratio (5stone dust:2resin:1Hardner)

Drilling holes of 18mm dia upto 300 mm depth and fixing nozzles for PMC grout in the inner chamber for fill the gaps and voids and cavities

Provision for PMC grouting with emulation added with ordinary Portland cement one part having polymer loading 10% with appropriate dose non shrink powder 0.05 part Cebex and plasticizer 0.05 part having pressure up 0.2 kg to 0.5 kg per cm square

Dismantling steelwork of manually /by mechanical means in built of section without disembarking & stacking within 50 mtr. lead as per direction of Engineer -in –charge

Providing and fixing SS (Grade 304 ) Railing /gate made of hallow tubes, channels, plates etc. including welding, grinding, buffing, polishing and fitting the same curvature (wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the gate with necessary accessories & stainless steel dash fastener ,stainless steel bolt etc. of required size on the top floor or the side of waist slab with suitable arrangement as per the approval of Engineer in charger ( For payment purpose only weight of stainless steel member shall be considered executing fixing accessories such as not, bolt, fasteners etc.

Taking out windows and doors and clerestory windows and shutter steel or wood including with 50 mtr lead ( 3 Sqm or below )

Providing and fixing SS (Grade 304 ) Tube Frame / Truss-made of hollow tubes ,channels, plates etc. including welding, grinding, buffing, polishing and fitting the same curvature (wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the gate with necessary accessories & stainless steel dash fastener ,stainless steel bolt etc. of required size on the top floor or the side of waist slab with suitable arrangement as per the approval of Engineer in charge ( For payment purpose only weight of stainless steel member shall be considered executing fixing accessories such as not ,bolt, fasteners etc.

Providing and fixing stainless steel Wire mesh (304 Grade) 0.3 mm dia wire and (25 X 25) mm aperture in both side with SS (25 x 3) mm nut and bolt complete as per direction of Engineer -in-charge.

Providing and fixing of 25 mm dia SS boll( HIT-VR M20 X 380 RE10 of Hilti or equivalent after drilling with 32mm dia drill bit trough existing stone masonry and thoroughly cleaning the same following proper method (Air blow ) finally 25 mm dia bolt is to be fixed .

Providing wood work in frame of doors, windows, clerestory windows and other frames ,wrought frame and fixed in position with hold fast lugs or with dash fastener of required dia & length (hold fast lungs or dash fastener shall be paid or separately

Dismantling of dressed stone work with ashlar face stone work, marble work or precast concrete work manually /by mechanical means including stacking of serviceable materials and disposal of unserviceable material within 50 meter lead.

Provision for laying of dressed local sand stone blocks size (0.50 X 0.30 X 0.20) cm Stacked at Sub circle office on all six face dressed and making the top rough and antiskid transported from Sub circle office ,Baliapanda (6 km ) to south gate of Temple including loading ,unloading with laying on 40mm thick Lime sand mortar (1lime :1 sand) and grouting the stone joints with lime and sand mortar for filling of the gaps and voids

Providing and laying of dressed and machine cut khondolite stone plates of avg. size (40-50x30x10) cm obtained from Govt. approved khondolite stone quarry including transportation, loading unloading charges up to the inside the temple ,laying and finishing with 25 mm of cement- sand mortar (1:4) etc. complete as per the direction of the site in-charge.

Raking out joints of stone masonry surface to the required width and depth with due care and precaution by mechanical/manual means, including preparing and cleaning the surface for re-pointing /refilling of joints, including disposal of rubbish to the dumping ground within 50 mtr. Lead etc., complete as directed by the Engineer in-charge of work.

Preparation of as surface Crack /stone joints to U/V shape (as where is orientation ) by means of cutting to a depth of minimum 15mm ,cleaning of joints by polymer modified cementious (PMC) joint sealant with 8% polymer loading .The sealant mix should be Ordinary Portland cement (OPC) khandolite stone dust and acrylic based polymer emulsion in the ratio of 1:2:0.2 by weight appropriate dose of Non shrink compound .The solid resin content in the acrylic based resin emulsion should be minimum of 40 %.

Providing and laying khandolite stone cladding of using khandolite stone flag of 50mm obtained from approved quarry wearing coat of 20mm thick cement sand mortar 1:4 mix etc. with all complete.

Provision for applying of water proofing coating treatment, after thorough cleaning and making the surface dust and dirt free, with Brush bond Roof guard on the roof of sub-shrines located in temple premises to prevent water leakage.

SHASANK SEKHAR NAYAK (BID ID -3233807)

CHITA RANJAN ROUTRAY (BID ID -3234258)

UTKAL ENTERPRISERS (BID ID -3232465)

Bidder Name

BIBHUDANANDA MOHANTY

SHASANK SEKHAR NAYAK

UTKAL ENTERPRISERS

CHITA RANJAN ROUTRAY