CONSTRUCTION OF RIVERSIDE SAVORIESI.E. BUILDING WITH UNDERGROUND ROAD BETWEEN NEHRU BRIDGE AND ELLISBRIDGE AND CONSTRUCTION OF PUBLIC PLAZA AND UNDERGROUND PARKING FACILITY AT SANSKAR KENDRA - TAGORE HALL CAMPUS CONNECTING RIVERFRONT ON WESTBANK FOR SRFDCL.

BILL OF QUANTITIES

NAME OF WORK:-CONSTRUCTION OF RIVERSIDE SAVORIES I.E. BUILDING WITH

UNDERGROUND ROAD BETWEEN NEHRU BRIDGE AND ELLISBRIDGE AND

CONSTRUCTION OF PUBLIC PLAZA AND UNDERGROUND PARKING FACILITY AT

SANSKAR KENDRA - TAGORE HALL CAMPUS CONNECTING RIVERFRONT ON

WESTBANK FOR SRFDCL.

RECAPITULATION SHEET

No. Item of Works Amount in Rs.

A Riverside Savories

B Sanskar kendra

Total Amount(Without GST)

Total Amount(Without GST)

BILL OF QUANTITIES

NAME OF WORK:- CONSTRUCTION OF RIVERSIDE SAVORIES I.E. BUILDING WITH

UNDERGROUND ROAD BETWEEN NEHRU BRIDGE AND ELLISBRIDGE AND

CONSTRUCTION OF PUBLIC PLAZA AND UNDERGROUND PARKING FACILITY AT

SANSKAR KENDRA - TAGORE HALL CAMPUS CONNECTING RIVERFRONT ON

WESTBANK FOR SRFDCL.

RECAPITULATION SHEET

Part-I :- Riverside Savories

No. Item of Works Amount in Rs.

A Civil Works + plumbing Work

B Electrical & ELV, HVAC Work

C Fire Protection Work

D Horticulture work

Total Amount(Without GST)

Total Amount(Without GST)

Part-II :- Sanskar kendra plaza

No. Item of Works Amount in Rs.

A Civil Works + Plumbing Work

B Electrical & ELV,ELV, & HVAC Work

C Fire Protection Work

Total Amount (Without GST)

Total Amount (Without GST)

(VOLUME - 3 For Civil & PHE Works)

Price Bid: Bill of Quantities (BOQ)

Tender Amount : Rs.

Contractor's Quoted Rates :

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

No. Item of Works Amount in Rs.

Part-I :- Riverside Savories

B Plumbing Work

Part-II Sanskar Kendra Plaza

B Plumbing Work

TOTAL AMOUNT OF CIVIL + PLUMBING WORK

TOTAL AMOUNT OF CIVIL + PLUMBING WORK

(VOLUME - 3 For Electrical,ELV&HVAC Works)

Price Bid: Bill of Quantities (BOQ)

Tender Amount : Rs.

Contractor's Quoted Rates :

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

Part-I :- Riverside Savories

No. Item of Works Amount in Rs.

C Electrical & ELV Work

D Elevator Work

Part-II Sanskar Kendra Plaza

No. Item of Works Amount in Rs.

C Electrical & ELV Work

TOTAL AMOUNT OF ELE, ELV, ELEVATOR AND HVAC WORKS

TOTAL AMOUNT OF ELE, ELV, ELEVATOR AND HVAC WORKS

(VOLUME - 3 For Fire Protection Works)

Price Bid: Bill of Quantities (BOQ)

Tender Amount : Rs.

Contractor's Quoted Rates :

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

No. Item of Works Amount in Rs.

Part-I :- Riverside Savories

F FIRE PROTECTION WORK

Part-II Sanskar Kendra Plaza

F FIRE PROTECTION WORK

TOTAL FOR FIRE PROTECTION WORK

(VOLUME - 3 For Horticulture Works)

Price Bid: Bill of Quantities (BOQ)

Tender Amount : Rs.

Contractor's Quoted Rates :

Ahmedabad Municipal Corporation

PLEASE NOTE : PLEASE DO NOT FILL PRICE BID IN HARD COPY.

No. Item of Works Amount in Rs.

Part-I :- Riverside Savories

G HORTICULTURE WORK

NAME OF WORK:-CONSTRUCTION OF RIVERSIDE SAVORIES I.E. BUILDING WITH UNDERGROUND ROAD BETWEEN NEHRU BRIDGE AND

ELLISBRIDGE AND CONSTRUCTION OF PUBLIC PLAZA AND UNDERGROUND PARKING FACILITY AT SANSKAR KENDRA - TAGORE HALL CAMPUS

CONNECTING RIVERFRONT ON WESTBANK FOR SRFDCL.

SCHEDULE OF QUANTITIES

Description of Item Unit Total QTY Rate(Rs.) Amount(Rs.)

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling

1 and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable Sqm 29,656.91 2.81

materials. (C) By mechanical means in area of light jungle

Cutting and felling trees of girth as specified below (measured at a height of 1 m above ground level)

including cutting of trunks and branches, removing the roots and stacking of serviceable material

2 and disposal of unserviceable materials within campus at directed place etc complete all as per

specifications and as directed by the Engineer-in-charge

2.1 Girth beyond 30 cm, up to and including 60 cm girth. NOS 5.00 451.00

2.2 Girth beyond 60 cm, up to and including 120 cm girth. NOS 5.00 2,011.00

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

4 Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete. Cum 619.28 603.23

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with

all lead and lift. (i) R.C.C. work

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing

posts including all earth work concrete in base and making good the disturbed ground stacking

useful materials as directed and disposing as directed and disposing of the unserviceable materials

with all lead and lift

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and

dismantling of concrete etc. in base of : T’ or ‘L’ iron or pipe

9 Dismantling Digital Led Advertisment Hording Board NOS 1.00 5,00,000.00

Dismentling wood work, wrought framed and fixed in frames trusses including stacking the materials

10 with all lead and lift. Cum 50.00 1,741.95

11 Dismentling steel work including distempering and stacking the materials with all lead and lift. KG 487.91 3.63

Scarifying gravelled macadam or bitumen macadam surface 6cm to 10cm .depth including stacking

useful materials on roadside and disposing off remaining stuff.

Excavation for foundation up to 1.5 m DEPTH including sorting out and stacking of useful material

sand disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation up to 1.5 m TO 3.0M DEPTH including sorting out and stacking of useful

14 material sand disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil Cum 26,911.50 128.52

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful

15 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil Cum 35,000.00 141.11

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and

16 stacking of useful materials and disposing of the excavated stuff upto 50 m lead.(A) Loose or soft soil Cum 17,000.00 162.02

Extra for additional depth more than 6.0 m for excavation for foundation including sorting out and

17 stacking of useful materials and disposing of the excavated stuff upto 50 m lead.(A) Loose or soft soil Cum 11,000.00 182.93

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated

18 rock, fly ash, aggregate of any kind etc. comp. upto any lead. up to 1.0 km Cum 12,000.00 256.16

18.1 Above 1.0km & up to 5 km Cum 24,000.00 326.73

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

19 layers not exceeding 20cm. In depth consolidating each disposited layer by ramming and watering. Cum 59,620.80 129.10

Carring out plinth treatment to pre or post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S and as per directions of Clerk-of-Work. For all levels and leads.

Providing and filling rubble soling including hand packing and filling interstices with quarry spalls

21 below hardscape and others for infrastructure work in external development as directed by EIC. Cum 100.00 2,370.00

PLAIN AND REINFORCED CEMENT CONCRETE

Providing and laying cement concrete 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregates

22 20mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth Cu.m 1,682.56 3,661.30

Providing and laying in position M- 250 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

23 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 1,005.10 4,853.56

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash(GRADE SLAB)

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

24 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 6,775.50 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Foundation)

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

25 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 4,958.30 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (RCC BEAM)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

reinforcment(Second Floor)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

25.2 reinforcment(utility Floor) Cu.m 627.99 79.70

Providing and laying in position M-250 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

26 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 151.20 4,853.56

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (RCC LINTEL)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

reinforcment(Second Floor)

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

27 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 2,514.40 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (RCC COLUMN)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

28 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 5,765.50 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash(RCC WALL)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and

transporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

29 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 6,256.53 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (RCC SLAB)

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Extra for additional lift of concrete for all R.C.C. work above floor two level excluding cost of

Providing and laying in position M-350 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant

andtransporting the concrete from Plant to point of laying, excluding the cost of centering shuttering

30 finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 Cu.m 409.55 5,140.94

to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (STAIRCASE)

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, binding and placing in

position complete upto floor two level ( Foundation to First Floor )

31.1 Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level. Kg 2,59,842.20 0.99

31.2 Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level. Kg 2,55,694.95 1.98

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

32 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 16,503.22 171.68

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

33 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 2,411.64 297.68

concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

34 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Columns, Sqm 2,411.64 94.02

Pillars, Posts and struts. (1) Square, Rectangular or polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

35 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 7,322.91 422.10

concrete work in. (G) Columns PillarsPosts and struts. (2)Circular or curved in Plan.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

36 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Columns, Sqm 7,322.91 94.02

Pillars, Posts and struts. (2) Circular or curved in plan

Extra for additional height of propping and centering where the height of propping and centering

37 exceeds 4 .O M between supporting floor to ceiling including temporary brick or stone pillars for Sqm 3,649.04 682.01

supporting as required. (ii) Height more than 5.0M.and upto 6.0 M.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

38 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Columns, Sqm 3,649.04 94.02

Pillars, Posts and struts. (1) Square, Rectangular or polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

39 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 6,138.66 229.95

concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including

attached buttresses & string course & the like.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

40 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Sqm 6,138.66 94.02

Columns,Pillars, Posts and struts. (1) Square, Rectangular or polygonal in plan.

Extra for additional height of propping and centering where the height of propping and centering

41 exceeds 4 .O M between supporting floor to ceiling including temporary brick or stone pillars for Sqm 1,509.42 386.48

supporting as required. (ii)Height more than 5.0 M.and upto 6.0 M.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

42 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Sqm 1,509.42 94.02

Columns,Pillars, Posts and struts. (1) Square, Rectangular or polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

43 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 11,632.50 229.95

concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including

attached buttresses & string course & the like.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

44 thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (G) Sqm 11,632.50 94.02

Columns,Pillars, Posts and struts. (1) Square, Rectangular or polygonal in plan.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

45 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 33,638.00 252.00

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (B)Flat surfaces

such as soffits of slabs Landings and the like. (1) Floors etc. upto 200mm in thickness.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. height of propping and centering below supporting floor to

47 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 39,771.47 192.15

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (H)(1) Sides

and soffits of Beams, Beam Haunchingscantilevers Girders, Bressumers and Lintels not exceeding 1 M.

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

49 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain Sqm 2,356.66 252.00

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

Extra for Providing formwork with sheathing steel sheets or Plywood Sheets (Using Minimum 12 mm

thick Shuttering Plywood, conforming to IS:4990) so as to give a Fair Exposed F3 finish in (B)Flat surfaces

such as soffits of slabs Landings and the like. (1) Floors etc. upto 200mm in thickness.

Earthwork for embankment including breaking clods, dressing with all lead and lift and including

watering rolling and consolidation of subgrade in layers at O.M.C. to required dry density including

filling the depression which occur during the process using power roller 8T to 10T.(E) From Borrow area

within 3.0KM. lead

Construction of 300mm (as per IRC 37) ThickGrannular sub base(GSB‐I) by providing coarse graded

material using B.T Metal 53 mm to 26.50 mm @ 35 % ,26.50 mm to 4.75mm 45% & Coarse sand below

52 2.36 mm 20 % in uniform layer with motor grader on prepared surface mxing by mix in place method Cu.m 1,687.68 1,443.27

with vibratory roller to achive the desired density complete as per close

Construction of Dry Lean Cement Concrete Sub-base over a prepared sub-grade with coarse and

fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate

cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1,

53 cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during Cu.m 969.00 3,335.86

trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching

plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes

vibratory roller, finishing and curing.

Construction of reinforced, dowel jointed, plain cement concrete of M40, pavement over a prepared

sub base with Ordinary Portland Cement @ 400 kg per cum, coarse and fine aggregate conforming

to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing

plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread,

54 compacted and finished in a continuous operation including provision of contraction, expansion, Cu.m 1,938.00 7,491.00

construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant,

debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and

grades as per drawing.

Providing and laying cement concrete 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregates

55 20mm nominal size) and curing complete excluding cost of formwork in Footpath. Cum 67.83 3,661.30

Applying and providing Expansion joint sealing System on 100 mm vide joint including cleaning of

expansion joint by mechanical means provision of adhesive and flexible membrane with required

56 bond length as per menufracturer specification and 4mm thick alluminium strip covering with one RMT 199.50 4,724.75

side sloted and bolted with suitable system, inclusive of all manpower, machinery and material as per

specification and as directed.

Providing and fixing expansion joint 50 mm thick expansion joint board of best quality and approved

57 make including cutting to required size and shape at all levels etc. complete as directed by EIC. SQM 1.00 3,250.00

Trimix flooring - BROOM FINISH

Providing and laying C.C. pavement of mix M-25 with batch mixed concrete from batching plant.

The concrete shall be casted in panel and finished with screed board vibrator, vacuum dewatering

process and finally finished by floating, brooming with machine. Grooves to be made of size 5mm

wide and one third of thickness of concrete within 48 Hours of concreting to form bay of 4 x 4 meters

58 using heavy duty cutting machine with diamond cutting wheel and filling of the groove with Cum 661.10 6,043.00

appropriate sealant etc. complete as per specifications and as directed by the EIC. If trimix concrete

shall be laid over on existing concrete surface, bonding agent shall be applied before laying of

concrete at all basements floors. Reinforcement if required shall be paid in relevant tender item.

Extra for carrying out Tremix - Vacuum-dewatering (VDF) for driveway and other floor area as

specified in detail drawing, it shall have contraction/sawed joints to be formed at every 10m distance

by grooving with mechanical saw within 48 hrs. operation should be carried out as soon as concrete

is ready to accept the saw cut w/o trowelling etc. as directed by EIC. Groove sawed joints of min.

mm thickness and 100 mm minimum depth (2/3rd depth of the pavement) with compressible shalitex

board or equivalent. It shall be well compacted, mechanically vibrated, finished to required level,

floated with neat cement with power trowel machine to get desired finish (smooth/broom), or a

levelling course, including MS shuttering, curing for 7 days etc. complete. The reinforcement for Tremix

floor to be installed as per drawing and contractor shall allow for one mock-up for approval without

cost. The sealant could be Semifigid Sealant M-80 of approved make. The rate shall be inclusive of

labour, grooves and machinery cost. The rate of concrete and steel shall be paid in relevant items

Masonary work using Aerated light weight concrete block having crushing strength not less than

60 kg/sqcm for super structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 Cu.m 3,190.19 4,483.73

fine sand ) complete as per Technical Specification.(upto first floor)

Masonary work using Aerated light weight concrete block having crushing strength not less than

60.1 kg/sqcm for super structure above floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) Cu.m 767.54 4,526.39

complete as per Technical Specification.(Second floor)

Masonary work using Aerated light weight concrete block having crushing strength not less than

60.2 kg/sqcm for super structure above floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) Cu.m 160.27 4,569.05

complete as per Technical Specification.(utility terrace)

Brick work using common burnt clay building bricks having crushing strength not less than

61 kg./Sq.Cm. in Sub Structure and Super Structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Cu.m 1,113.87 4,607.37

PLASTERING AND PAINTING

Providing 15 mm. thick cement plaster in single coat on fair side of brick wall for interior plastering

upto floor two level finished even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For all

levels, hights and leads of works. etc, complete for all floor heights as directed. Rate shall be inclusive

62 of hexagonal chickenmesh at junction of concrete and brick work. Minimum width of the chicken Sq.m 25,387.72 155.61

mesh shall be 150 mm covering the brick / concrete surface equally, as directed by EIC.( Upto first

Providing 15 mm. thick cement plaster in single coat on fair side of brick wall for interior plastering

above floor two level finished even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For

all levels, hights and leads of works. etc, complete for all floor heights as directed. Rate shall be

62.1 inclusive of hexagonal chickenmesh at junction of concrete and brick work. Minimum width of the Sq.m 8,062.56 178.77

chicken mesh shall be 150 mm covering the brick / concrete surface equally, as directed by

EIC.(Second floor)

Providing 15 mm. thick cement plaster in single coat on fair side of brick wall for interior plastering

above floor two level finished even and smooth in [II] Cement mortar 1:4 (1 cement : 4 fine sand) For

all levels, hights and leads of works. etc, complete for all floor heights as directed. Rate shall be

62.2 inclusive of hexagonal chickenmesh at junction of concrete and brick work. Minimum width of the Sq.m 152.71 201.93

chicken mesh shall be 150 mm covering the brick / concrete surface equally, as directed by

EIC.(Utility terrace)

Providing and laying average 20 mm. thick double coat Sand face/Mala cement plaster on external

walls upto any height above ground level and for all shapes consisting of average 14 mm. thick

backing coat of CM 1:3 (1 cement: 3 coarse sand) and average 6 mm. thick uniform grained textured

finish coat using wooden Gutka, in CM 1:1 (1 cement: 1 sand),with line , level & plumb, including

63 scaffolding, forming grooves, drip moulds, pattas, hacking RCC surface, curing etc. complete. as Sq.m 18,063.34 297.68

directed by EIC. Rate shall be inclusive of hexagonal chickenmesh at junction of concrete and brick

work. Minimum width of the chicken mesh shall be 150 mm covering the brick / concrete surface

Providing 10mm thick cement plaster in single coat on ceiling upto floor two level and finished even

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Applying two coats of acrylic putty & two coats of primer of approved brand and manufacture on

65 new wall surface to give an even shade including thoroughly brushing the surface free from mortar Sq.m 53,193.83 40.19

dropping and other foreign matter and sand papered smooth.

Providing and painting internal walls with two coats of plastic emulsion paint of approved make & of

shade. The rate shall include for all ladders, scaffolding and supports and including complete surface

preparation, including scraping the surface off existing surface paint, loose particles and cleaning

and applying primer and putty as necessary to achieve a surface in perfect line and level. Wherever

66 necessary, POP punning or cement plastering needs to be done as per site condition, if the plastered Sq.m 53,193.83 78.44

surface has chipped off. The final finished surface should be smooth and in perfect line and level

without undulations on surface. etc. complete as directed by EIC.

Providing, applying and finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials.etc complete. as directed by EIC.

Providing and applying External texture Wall painting (with Superior quality exterior emulsion paint

100% pure acrylic, anti-carbonation water-based of approved make and manufacture on the

undecorated wall surface to give an even shade including thoroughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth. The texture paint shall be of

premium quality as selected and approved by architect and EIC. Cost including with one coat of

texture, followed by two coats of 100% acrylic water based anti-carbonation paint conforming to IRC

SP 80 as certified by National Test House, Anticarbonation properties as demonstrated by > 50 m of

CO2 diffusion resistance equivalent air layer thickness, Solar Reflective Index > 100 as tested by

Building Energy Performance Laboratory, Chloride ion diffusion coefficient - Nil (ASTM C 1202),

Adhesion Strength to Concrete > 1.5 N/mm2 (ASTM D 4541), min 200% elongation (ASTM D 2370). The

overall system should have 7 years of performance warranty, and low VOC.

Providing & laying broken white china mosaic flooring for plain and curved surfaces, comprising of

to 20 mm. size broken pieces of white glazed tiles laid over water proofing using cement mortar 1:3

bedding, The flooring shall be tampered to bring the mortar cream up to the surface, including

68 rounding of the junctions and extending them upto 30 cm. along the parapet wall. The rate shall Sq.m 4,890.00 739.89

include bands, if different colour is used, any pattern or design as per drawing and direction, curing,

cleaning with water and oxalic acid, etc. complete. as directed by EIC.

Providing and laying integral cement based waterproofing treatment of the agency approved by

department, including preparation of surface as required for treatment of roofs, terraces etc mixing

with waterproofing compound as per IS:2645, with average thickness of 115mm and minimum

thickness at drain point as 65 mm. Following works are included in above item

(i) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with

proprietary water proofing compound over the RCC slab including cleaning the surface before

(ii) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement

mortar 1:4 (1 cement : 4 coarse sand) using Ready mix mortar admixed with proprietary water

proofing compound over 20 mm thick layer of cement mortar of mix 1:4 (1 cement : 4 coarse sand)

using Ready mix mortar admixed with proprietary water proofing compound to required slope and

treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and

(iii) After two days of proper curing applying a second coat of cement slurry admixed with proprietary

waterproofing compound.

(iv) Finishing the surfaces with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse

sand) using Ready mix mortar admixed with proprietary water proofing compound and finally

finishing the surface to receive the China Mosaic waterproofing treatment.

(v) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for

curing and for final test. All above operations to be done in order and as directed and specified by

the Engineer in Charge.

Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like

Rafts, Retaining Walls etc. into the drum of the ready-mix truck in powder form, using integral

crystalline admixture @ 0.80% by weight of cement content per cubic meter of concrete or as

recommended by Manufacturer. The material shall meet the requirements as specified in ACI-212-3R-

2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete as

per DIN 1048 Part 5 & resistant to 16 bars hydrostatic pressure. The crystalline admixture shall be

70 capable of self-sealing of cracks up to a width of 0.5 mm by forming insoluble microscopic needle

shaped crystals through ctalyst reaction with un-hydrated cement particle and moisture.

It should be hydrophilic in nature, should be able to grow crystals year after year to seal microcracks.

For M- 250 grade(Cement level 450 kg ) (GRADE SLAB)

70.1 Admixture Dosage :- 3.6Kg/m3 KG 3,618.23 215.00

Providing and mixing integral crystalline admixture for waterproofing treatment to RCC structures like

Rafts, Retaining Walls etc. into the drum of the ready-mix truck in powder form, using integral

crystalline admixture @ 0.80% by weight of cement content per cubic meter of concrete or as

recommended by Manufacturer. The material shall meet the requirements as specified in ACI-212-3R-

2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete as

per DIN 1048 Part 5 & resistant to 16 bars hydrostatic pressure. The crystalline admixture shall be

71 capable of self-sealing of cracks up to a width of 0.5 mm by forming insoluble microscopic needle

shaped crystals through ctalyst reaction with un-hydrated cement particle and moisture.

It should be hydrophilic in nature, should be able to grow crystals year after year to seal microcracks.

For M- 350 grade(Cement level 500 kg ) (Foundation)(RCC Wall) (RCC SLAB)

71.1 Admixture Dosage :- 4Kg/m3 KG 61,528.22 215.00

Providing and applying Synthetic Rubber based Swelling Waterstop tape, 20mm x 5mm thick for

construction joints treatment of RCC structure such as retaining walls and at the junctions of raft slab

with the retaining walls etc. After cleaning the surface, one coat of required adhesive for swellable

water stop shall be applied throughout the length of the joint. Over the primed surface Swelling

72 Waterstop shall be placed. The waterstop conforms to the following swelling properties: Swelling RMT 4,892.91 410.00

percentage of swelling waterstop in clear water 1000%, concrete water 800% & salt water 300%. The

work shall be carried out all complete as per manufacturer specification.

WET Areas - Sunk Slab, Bathroom, Kitchen, Podium, Terrace, OHT & UGT Water Proofing

(Cleaning and Preparation of surface with help of wire brush or grinder, wash the slab with clean

water. Remove all loose concrete, grease, oil using wire brush and scrubber. Repair and fill all cracks,

joints and annular space is included)

Supply and application of 2mm thick with a covergae of 3.2kg/sqm in 2 coats two-component, high

flexible, elastic cementitious mortar made from cementitious binders, fine-grained selected

aggregates, special admixtures and synthetic polymers in water dispersion with an elongation of

120% (DIN 53504), Static crack bridging ability of >2.5mm (EN 1062-7), Permeability to water vapour sD

= 3.6 m, µ = 1800 (EN ISO 7783-1), Impermeability to water < 0.05kg/m²·h0.5 (EN 1062-3), Permeability

to CO₂ sDCO2 >50m (EN 1062-6), Reaction to fire (Euroclass): E (EN 13501-1), adhesion to concrete

after 28 days: 1.3N/mm² (EN 1542) when applied @ 2mm thickness (in 2 coats) on the surface

73 prepared for waterproofing to be carried out to ensure the mechanical properties of the product with Sq.m 2,000.00 1,127.00

Mapenet 150. The application of the product shall be carried out after the thorough preparation of

the surface which includes cleaning, crack treatment, corner joint treatment, grouting and priming

primer having Colour: opalescent Speci c gravity (kg/l): 1.01 Dry solids content (%): 15 Brook field

Viscosity # 1, rpm 10 (mPa·s): 20 in dilution with water {1:1}.

Addionally apply fiber net for reinforcing the waterproofing membrane and with Mapenet 150 tensile

strength should be complied minimum 3.2 MPa after curing.

1. Tensile Strength : 3.2 Mpa

2. Crack Bridging: 2.8 mm

Water Tank Plastering & Food Grade Epoxy

Underground Water Tank and Overhead Water Tank -Plastering & Internal coating

(Cleaning and Preparation of surface with help of wire brush or grinder, wash the slab with clean

water. Remove all loose concrete, grease, oil using wire brush and scrubber. Repair and fill all cracks,

joints and annular space is included)

Plaster Over Waterproofing Membrane: Before application of food grade epoxy supply & application

of concrete plaster on avg thickness of 15-20mm by adding water proofing compound @200 ml per

Food Grade Epoxy: Supply and application of two-component epoxy paint made from epoxy resins

74 and special pigments with high covering capacity for anti-acid and non-toxic coatings on concrete Sq.m 1,252.91 828.00

surfaces. Apply two coats of the product on a solid, clean substrate treated with primer (not included)

with a brush, roller or by airless spray. Wait between 6 and 24 hours between each coat, according to

surrounding conditions. The product must comply with the principles defined in EN 1504-2/-9 and

have the following characteristics like, Abrasion resistance:(EN ISO 5470-1) <600 mg, Permeability to

CO₂: (EN 1062-6) > 900 m, Permeability to water vapour: (EN ISO 7783-1-

2) Class III, Resistance to thermal shock (1x): (EN 13687-5) 3.5 MPa, Taber abrasion resistance (g): 0.1;

viscosity - rotor

PAVING AND FLOOR FINISHING

Providing & laying machine cut & machine polished (mirror finish) 18mm - 20mm thick Granite Stone

of Steel Grey /Sadarhalli / Z Brown / Brown or other approved colour at all floor & location in

necessary cement mortar bedding /backing, close jointed & grouted with matching cement slurry

and rounding of edges, finished to line, level,curing etc. as required, including cutting of stone slab,

75 wastage, making cut outs, grooves wherever required, machine polishing/ hand polishing (where

machine cannot have access) etc. complete all as per specifications, drawings and as directed by

the Engineer in charge. Note: Top exposed surface on plan &exposed vertical finished face shall be

measured for payment in Sqm.

In flooring with machine polished Granite stone of size 800mm x 800mm/ 1000mm x 1000mm / (and

any other size and pattern as per drawing) laid over & including 20mm thick cement mortar1:4 (

75.1 cement : 4 coarse sand) bedding. (Using ready mix mortar) including cement slirry at 4.40 Kg/Sqm Sq.m 1,759.91 2,750.00

over bedding and matching slurry with white cement at 2.20 Kg/Sqm for grouting the joints.

18 mm thick one side machine polished granite stone of approved colour, shade and surface finish

for Cladding/dado/riser/treads with stone slabs of various sizes in pattern including 12 mm thick 1:4

cement mortar (Using ready mix mortar) backing, fixing of 6mm (approx.) size angular stone chips to

the backside of granite after applying araldite to the unpolished surface of the granite to create a

75.2 surface suitable for proper bond with backing and filling the space between granite and backing Sq.m 5,865.76 2,850.00

with cement slurry including adequate curing etc. complete as directed and including rounding &

polishing all exposed edges in semicircle / chamfering / or as per drawing & as ditected.

For top of dwarf walls, parapets, seat wall, planter wall etc using machine polished Granite stone of

approved colour, shade & size as per drawing laid over & including 20mm thick cement mortar1:4 (

cement : 4 coarse sand) bedding. (Using ready mix mortar) including cement slirry at 4.40 Kg/Sqm

75.3 over bedding and matching slurry with white cement at 2.20 Kg/Sqm for grouting the joints. including Sq.m 689.28 2,800.00

half round / semi circle / camfering moulding & polishing of exposed face etc complete.

Providing & laying at all floors & locations Homogeneous Full body Vitrified tile/ Glazed vitrified tile/

Anti Skid Vitrified tile double charge/ multi charge (Glossy /Matt/ Satin)/ approved manufacturers of

sizes 600 mm X 600mm / 800mm X 800mm / 1000 mm X 1000 mm size or as per approved size and

having mimimum thickness 8.5 mm or as specified by approved manufacturer tiles conforming to

IS:15622 having water absorption less than or equal to 0.08% (Group B I a), in flooring/ skirting/ dado/

cladding / staircase tread/ riser at all floors and location, heights/ levels and lead in approved

pattern and colour, shade laid over cement mortar bedding/ backing/ adhesive backing, including

cleaning and preparing the surface for bedding/backing, spreading the neat cement slurry, close

jointed and grouted with matching coloured readymade cement grout and approved pigment as

per manufacturer's specifications, finished to level, line, slope and plumb, cutting of tiles, wastage,

making openings / cut out if neccesary, final cleaning of surfaces, curing etc. all as per drawings,

specifications & as directed by Engineer in charge.

In flooring using Anti Skid Finish tiles of size 600 mm X 600 mm laid over 20 mm thick cement mortar1:4

bedding (using reday mix mortar) and spreading neat cement slurry by using minimum cement about

2 kg/sqm prior to bedding and spreading cement paste using minimum cement of about 4.50 kg/sqm

over bedding,, and including Providing and laying Durafloor protector XF 3 mm thick sheet of

approved make and brand over the whole vitrified tile / stone flooring area along with removing and

76.1 cleaning the same before handing over without damaging the finished surface & making good the Sq.m 1,541.65 1,400.00

damages, if any etc and including Providing in flooring & skirting 3 mm thick and 8.5 mm deep grout

line using PVC spacers for creating true alignment and gap between vitrified tile work, if shown in the

drawing & the 3 mm spacer joints filled with approved cement based tile grout including all labour

material, wastage complete.

In dodo / skirting / cladding / sloped skirting laid over 12 mm thick CM 1:4 (1 cement : 4 sand, using

76.2 reday mix mortar) backing, including providing grooves as per drawing on top of skirting. ( Using Sq.m 2,372.16 1,400.00

AntiSkid vitrified tiles or Double charge vitrifed tiles )

Providing and laying machine cut and machine Polished Kotah stone flooring, skirting, riser, treads at

all floors, levels & location including cement mortar (using ready mix mortar) bedding / backing,

close jointed & grouted with matching cement slurry and finished to line, level, curing etc. as

77 required, including cutting of stone slab, wastage, making cut outs, wherever required, machine

polishing/ hand polishing (where machine cannot have access) and including providing and laying

6 mm thick POP during construction period etc. complete all as per specifications, drawings and as

directed by the Engineer in charge.

In flooring with mirror polished, 25 mm minimum thickness kotah stone slab of size 600mm x 600mm /

77.1 575mm x 575mm / (and any other size and pattern as per drawing) laid over bedding of 20 mm Sq.m 2,386.02 982.83

Ready mix mortar having Cement: Sand (1:4)

Polished Kotah stone of approved colour, shade and surface finish for cladding/ dado/skirting/

/Facia/Window Sill/riser/treads with stone slabs of various sizes in pattern including 12 mm thick 1:4

cement mortar (Using ready mix mortar) backing, fixing of 6mm (approx.) size angular stone chips to

the backside of Kotah stone after applying araldite to the unpolished surface of the Kota stone to

77.2 create a surface suitable for proper bond with backing and filling the space between Kota stone and Sq.m 22.96 1,058.00

backing with cement slurry including adequate curing etc. complete as directed and including

rounding & polishing all exposed edges in semicircle / chamfering / or as per drawing & as ditected.

Providing and laying Riverwash finish Dark grey / Steel Grey /Adhunik/ Any other approved color

Granite stone flooring / Coping in required size, design and patterns, in linear as well as curvilinear

portions all complete as per the architectural drawings with 30 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-

8 mm gap as per design and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or

78 struck pointed as per design and drawing with white cement slurry admixed with pigment of Sq.m 18,248.80 3,451.00

matching shade including rubbing, pointing, curing, polishing, moulding/ champhering at edges and

final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as

specified and as directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval,

complete for finished item of work. Wax polishing is strictly not allowed.

Providing and laying Riverwash finish Dark grey / Steel Grey /Adhunik/ Any other approved color

Granite stone flooring / Coping in required size, design and patterns, in linear as well as curvilinear

portions all complete as per the architectural drawings with 18-20 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 Coarse sand), portions butt jointed or with 5-

8 mm gap as per design and drawing in 1:2 (cement : fine sand) and pointing full depth (flushed) or

79 struck pointed as per design and drawing with white cement slurry admixed with pigment of Sq.m 582.95 2,900.00

matching shade including rubbing, pointing, curing, polishing, moulding/ champhering at edges and

final scrubbing using mechanical/ manual means to achieve clean surface etc. all complete as

specified and as directed by the Engineer-in-Charge. Including Minimum 2 mockups for approval,

complete for finished item of work. Wax polishing is strictly not allowed.

Providing and fixing Pre cast Kerb blocks of various types (Half Batter, Bull nose, Flat, offlet, Transition,

Dropper, etc,.) and size of 600x450x150mm steel mould Vaccum wet pressed for connecting roads,

pathway-prominade area and other area with true line & level, including grading, geometrical

shapes in curves, circles etc. at respective finish level etc. completed as specified in drawing and

80 specification. It shall be of CC- M25 grade of concrete and fitted and jointed in C:M 1:1 with Rmt 2,875.38 1,762.00

throughly curing, rendering with cement slurry, cleaning the joints neatly etc. completed as directed

by EIC. It allows to satisfy respective IS-codes for materials, manufacturing process and test results.

Providing and fixing 80 mm thick (min.) factory made paver blocks of specified finish (shot blasted),

approved make and colour, shade, size, shape laid in pattern manufactured with cement concrete

grade not less than M-40 and conforming to IS:15658, including providing & laying 20 mm thick

81 bedding of cement mortar (using ready mix mortar having cement: sand, 1:4) finishing to line, level Sqm 9,083.61 1,400.00

and slope, finally filling the joints with matching cement mortar and cleaning the surface etc.

complete all as per specification and as directed by the Engineer- in- Charge.

Flooring with Cobble stone of approx. Size 100x100x100 mm (thick) laid on 25 mm average thick

cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with

pigment to match the shade of the stone, laid in approved pattern, approved colors complete in all

respect as per direction of Engineer-in-charge.

Providing and fixing 60 mm thick (min.) factory made paver blocks of specified finish (shot blasted,

pneumatic compressed), approved make and colour, shade, size, shape laid in pattern

manufactured with cement concrete grade not less than M-35 and conforming to IS:15658, including

83 providing & laying 20 mm thick bedding of cement mortar (using ready mix mortar having cement: SQm 1,019.00 1,250.00

sand, 1:4) finishing to line, level and slope, finally filling the joints with matching cement mortar and

cleaning the surface etc. complete all as per specification and as directed by the Engineer- in-

Providing & laying machine cut machine polished natural stones as mentioned for the followings for

kitchen / Basin platform topping, counter topping and facia over and including necessary cement

mortar for backing / bedding, close jointed and grouted with matching cement slurry and finished to

line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastages, making cut

84 outs wherever required etc all as per specifications and as directed by the Engineer in charge. Notes :

1) Verticals, shelves, platform shall be embedded minimum 25 mm in wall/ flooring. 2) Top exposed

surface on plan & exposed vertical finished face shall be measured for payment in sqm.

For kitchen / Basin platform top, Vertical support for Counter, upto 750 mm wide and maximum length

upto 1.80 m in single piece consisting machine cut machine polished 35 mm thick cuddappah stone

at bottom and mirror polished machine cut 18mm thick Jet black/ approved Granite stone at top

84.1 fixed with 47 mm thick 1:3 cement mortar (Using ready mix mortar), between two stone slabs (Double SQM 49.61 5,449.00

stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges etc

For kitchen platform horizontal & vertical facia upto100 mm wide machine cut machine polished on

one side 18 mm thick Jet black/ approved Granite stone fixed with epoxy resin base (Araldite

adhesive orequivalent) including round moulding and polishing the edges etc complete.

Providing and laying 30 mm thick (without pattern thickness) all type of tactile pattern stone with

textured finish as a warning stone of required size and pattern, depth of pattern shall be as per

standard of vision impaired persons (minimum 8mm above) in any colours and shades in for outdoor

floors such as footpath, atrium, terrace location etc., laid on 30mm (average) thick base of cement

85 mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with Sqm 1.00 5,219.72

white cement mixed with matching pigments etc. complete as per direction and approval of EIC.

(RATE ONLY ITEM)

Providing & Fixing M/F Suspended Plain Gypsum Ceiling which includes 20x28x30x0.5mm Perimeter

Channel {Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} is fixed along the

perimeter of existing wall/ partition with the help of suitable HPS - 1 (6x40) impact anchor / PVC

Anchor (6x40) at 600mm c/c for the brick wall, at 600mm centres. 25x10x0.5mm Ceiling Angle

{Material-GI(IS513), YS-300Mpa, Finish-Galvanised 150GSM(IS 277)} is suspended at up to 1.5m height

by fixing it to the 27x37x25x1.6mm Gyproc® soffit clit {Material-GI(IS513), YS-300Mpa, Finish-

Galvanised 150GSM(IS 277)} with Soffit Cleat and or Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade,

Zinc coating (7 to 8 microns)Pull Out Load- 7.5kN for M30 concrete grade} creating 1220mm x

1220mm grid. 15x45x15x0.9mm Intermediate channel {Material-GI(IS513), YS-300Mpa, Finish-

Galvanised 150GSM(IS 277)} is fixed to the 25x10x0.5mm Ceiling Angle with M6 x 12mm Hex Bolt & Hex

Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 metal to

metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} The

80x26x0.5mm Ceiling Section {Material-GI(IS513),YS-300Mpa,Finish-Galvanised 150GSM(IS 277)} is then

fixed to the 15x45x15x0.9mm Intermediate Channel {MaterialGI(IS513),YS-300Mpa,Finish-Galvanised

150GSM(IS 277)} with the help of Ø 2.64mm Connecting Clip {Material-High carbon spring steel wire

86 (BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Sqm 995.40 978.00

Intermediate channel at 457mm c/c. Single-layer of 12.5mm thick Plain (conforming to IS 2095 Part 1:

2011, ISI Mark Certified, International EPD Verified) of size 1219 x 1829mm is then screw fixed to

ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case

hardened Grey Phosphating as per JIS G3507-1} standard at 230mm centres.Gypsum Board to be

certified class 1 under BS-476 Part 5,6, & 7 & certified GreenPro by CII. Finally, square and tapered

edges of the boards are to be jointed and finished to have a flush look which includes filling and

finishing with Jointing Compound & Joint Paper tape. Serrated steel section has an effective thickness

of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic

performance & fire resistance as compared to plain steel section. All metal components are Design

Patented in India (325062). Vendor to submit MTC, material inspection report and/or performance

certificate for the system. If required trap door also provided as per drawing is included. No Extra

payment shall be made for the Trap Door.

Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter

locking metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size

24x32x0.3x3600mm, cross "T" of size 24x25x0.3x1200mm, secondary cross "T" of size 24x25x0.3x600mm

and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposed capping of width 24 mm of all T-

sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x3000mm {Material-GI(IS513), YS-

280Mpa, Finish-Galvanised 90GSM (IS277)} is fixed along the perimeter of the ceiling to Walls,

partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6x40mm placed at

mm c/c. soffit cleat 27x37x25x1.6mm {GI(IS513) YS-260Mpa, Finish-Galvanised 120GSM (IS277)} is fixed

with Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull out load-

6.8kN for M30 concrete grade} creating (1200x1200)mm grid. Main-T runners 24x32x0.3x3600mm are

then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size

85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm

from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm

from the adjacent wall. 24x25x0.3x1200mm cross T {Material- GI(IS513),YS-280Mpa, Finish-Galvanised

90GSM (IS277)} is interlocked between the main T at 600mm center to center to form a grid of

1200x600 mm and then secondary cross “T" 24x25x0.3x600mm {Material-GI(IS513), YS-280Mpa, Finish-

Galvanised 90GSM(IS277)} is then interlocked at middle of the (1200x600)mm grid to form grids of

(600x600)mm. Cross Tees at the ends having length more than 600mm are to be supported

independently.Finally 12.5mm thick square edge Gypsum tile (meets requirement of specification

mentioned under DAR no. 12.52.3 in Delhi Schedule of rates (DSR)), of size 595x595mm, made of

Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with

white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the

back side with all edges sealed with the face side PVC film which goes around and wraps the edges

and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid.

Providing and Fixing Metal Frame Suspended Ceiling which includes Perimeter Channel of 0.50mm

thick, having one flange of 20mm and another flange of 30mm and a web of 27mm, fixed along the

perimeter of ceiling, screw fixed to wall/ partitions with the help of nylon sleeves and steel screws.

Then suspending Intermediate Channel of 0.90mm thick, web of 45mm with two equal flanges of

15mm each from the soffit at 900mm centres with ceiling angle of 0.50mm thick, having one flange of

10mm and another flange of 25mm, fixed to soffit with the help of soffit cleat (27 x 37 x 25 x 1.6mm),

88 Ø12 x 45mm Metal Anchor Fasteners (Rawl Plugs) and M6 Bolt Nut (6 x 12mm). Ceiling Section of

0.50mm thick, having a web of 53mm (80mm overall width of the profile) with two equal flanges of

26mm each and equal lips of 10.5mm each are then fixed to the Intermediate Channel and in

direction perpendicular to the Intermediate Channel at 488mm c/c(max) with GI connecting clips

(wire diameter of 2.64mm). Additional members shall also be provided to support the plank joints, as

per site conditions.

6mm Fibre Cement Board (conforming to IS 14862: Type B- Category 3; Density >1200Kg/m3; MOR at

EMC >10MPa and MOR in Wet Condition >7MPa; with Fire property classification as non-combustible,

Class A and A2-s1-d0, when tested in accordance to BS 476, ASTM E84 - 18B and EN13501: Part

respectively) and 9mm Everest Heavy Duty Fibre Cement Board (conforming to IS 14862; Type A -

Category 4 Density >1450Kg/m3, MOR in wet condition >14MPa, Class A and A1, when tested in

accordance to BS 476, ASTM E84 - 18B and EN1350: Part 1, respectively), as substrate and finished

88.1 ceiling board, shall then be screw fixed to the bottom of the ceiling section with 25mm and 35mm Sqft 50,181.35 95.00

Everest self-tapping self-drilling countersunk screws, respectively. Screw fixing of the substrate board

and the Heavy Duty Board shall be at 300mm c/c (max). The joints of the boards shall be staggered

to avoid through joints. The exposed Everest Heavy Duty Fibre Cement Board shall be screw fixed with

desired grove finish as per the specification.

Providing and Fixing in position, Acoustic micro perforated metal ceiling clouds made of aluminium

Sheet (exposed side powder-coated) of size as per drawing have NRC better than 0.85 on both side,

Micro holes dia. 0.04 - 0.08mm, water resistant, no back material, warranty 25 years, electromagnetic

immunity – 40% than general aluminium, dust proof, incombustibility Class A, Acid/ Alkali resist water

tolerant, Non-toxic recyclable install with required hanging system. All material to be approved by the

89 architect & EIC prior to installation. The design, color and shape of the panel shall be approved by Sqm 1,350.00 5,277.55

the architect & EIC. Complete with hanging arrangement to suspend from the main ceiling/slab.

Installation system as per vendor specification and to be approved by architect & EIC prior to

installation. All Makes and models of all items/samples should be approved by the Architect and

Engineer in charge prior to the installation.

DOORS & WINDOWS

90 Aluminium Framed Doors with Floor Spring

Design, Fabrication, Supply, Installation, Testing, Protection, Cleaning & Handover Single shutter

aluminium framed door opening outward system to withstand the design wind pressure. The system

shall have a Wool pile weather sealing at perifry of Door Frame. The profile system is in line with the

tender drawing & minimum of 1.8 mm thickness.

Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover Single leaf double swing

Frame door made out of 12mm thick fully tempered (FT) glass with PT series patch fittings, Door lock

and BTS 80, 90 deg with EN 1-4 spring capacity floor spring. Floor spring covers shall be SS satin finish,

as per the Architect's approved shop drawings.

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard

from approved extruder. The structural profiles shall have minimum 1.8mm wall thickness. All the

visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 -

80 micron confirming to AAMA 2604. The non visible aluminium surfaces shall have minimum

chromatizing treatment.

All Material Make / Vendor list / Supplier list shall be as per tender specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all Design & shop drawing approval from architect & consultant.

Aluminium framed door system with glass

Quote rate for complete system as mentioned above under item (B).

Aluminium Framed Single Swing Doors:- Double Shutter (Size :- 1610 mm (W) x 2400mm (H) NOS 18.00 51,850.00

Aluminium Framed Single Swing Doors:- Double Shutter (Size :- 1425 mm (W) x 2400mm (H) NOS 18.00 46,200.00

Aluminium Framed Single Swing Doors:- Double Shutter (Size :- 1500 mm (W) x 2400mm (H) NOS 36.00 48,600.00

Vision Glass:- 12mm Thk.:- Providing and fixing glass:-

Glass:-12mm thk. (12mm thk. Clear tempered glass) (As per Client / Architect Approval sample). Sqm

91 Spider Canopy with Laminated glass on SS Support Above Door.

Shop Drawing, Fabrication, Supply, Installation, Testing, Protection, Cleaning & Handover of SS316

Support canopy with spider system of DORMA / OZONE custom Shop Drawing with stand the Shop

Drawing, wind pressure confirming to IS -875 part III. (The system must pass the proof test at 1.5 times

Shop Drawing, wind pressure without any failure) with weather sealants, backer rod, Bracketing

system with Aluminium Alloy of 6005 T5 brackets Shop Drawing,ed to accommodate three

dimensional movements with serrated plate and serrated washers, SS 316 grade fasteners & Anchor

Fasteners, nylon separators to prevent bi-metallic contacts, all complete required to perform as per

specification and drawing in conjunction with BOQ.All SS members-Grade 316 With have satin finish

inline with architect requirement.

The stainless steel spider system of Grade 316, supported on SS structure, all inline with the tender drgs.

All the weather sealants shall be non staining of approved make, Stainless steel spider system of

grade 316 with Articulated bolt assembly, with SS 316 grade fasteners and anchor bolts of approved

make, Teflon/ nylon bushes & separators to prevent bi-metallic contacts, all in complete required to

perform as per specification and drawing in conjunction with BOQ.

Shop Drawing, Fabrication, Supply and install required prefabricated grid on to the SS Steel portal with

full Welded of as recommended by approved supplier to support given Shop Drawing, loads. The

brackets shall have provision movement to accommodate the construction tolerances . Use of SS316

brackets with washers to prevent wind direction movement after final position.

All Material Make / Vendor list / Supplier list shall be as per tender specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all design & shop drawing approval from architect & consultant.

91.1 Quote rate as mentioned above under item (D) with Laminated Glass.

17.52mm Laminated glass :- (8mm Clear FT Glass + 1.52mm Clear SGP Kuraray Lamination + 8mm 19.00 13,500.00

Clear FT Glass)

91.2 Quote rate for complete SS works as mentioned in item (D). Ton 19.00 1,80,000.00

92 Aluminium Framed Doors with AHPL and Floor Spring.

Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover Single leaf, double swing

Aluminium Frame door System, The system shall have a wool pile weather sealing all side door frames.

The profile system is in line with the tender drawing & minimum of 1.8 mm thickness. Patch fittings,

Door lock and BTS 80, 90 deg with EN 1-4 spring capacity floor spring. Floor spring covers shall be SS

satin finish, as per the Architect's approved shop drawings.

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard

from approved extruder. The structural profiles shall have minimum 1.8mm wall thickness. All the

visible surfaces shall have high Durability (Akzonobel) / Super durable (Jotun) Powder coating of 60 -

80 micron confirming to AAMA 2604. The non visible aluminium surfaces shall have minimum

chromatizing treatment.

All Material Make / Vendor list / Supplier list shall be as per tender specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all Design & shop drawing approval from architect & consultant.

Aluminium framed door system with glass.

92.1 Quote rate for complete system as mentioned above under item (E)

Aluminium HMPS Framed Single Swing Doors:- Double Shutter (Size :- 1000mm (W) x 2400mm (H) NOS 18.00 32,500.00

Aluminium HMPS Framed Single Swing Doors:- Double Shutter (Size :- 1000mm (W) x 2100mm (H) NOS 72.00 28,500.00

Aluminium HMPS Framed Single Swing Doors:- Double Shutter (Size :- 1200mm (W) x 2400mm (H) NOS 12.00 39,000.00

Quote rate for complete system as mentioned above under (E) Including 6mm thick (AHPL) aluminium

high-pressure laminate of a thick fire-retardant (FR) grade mineral-filled thermoplastic inorganic core

of grade B sandwiched between two thin coil PVDF coated aluminium sheets (Top i.e. face #1 & rear,

i.e. face #2) of Alloy Grade 3003 and H-16 temper and minimum thickness of 0.5mm each as specified

in the nomenclature of item. The HPL fire retardant core of B grade

Supplying & fixing in position the following type solid core block board flush door shutter (Single/

double leaf) with commercial ply facing / prelamination on both sides conforming to IS 2202 (Part-1)

of approved make & brand with external / internal type second class teak wood lipping alround of

required width and depth (20 minimum thickness all around) of shutter as per IS/as specified, fixing

shutters in position to HMPS door frames/ wooden frames/ granite frame works (door frames shall be

93 paid separately under relevant item) at all floors by cutting/ planing if necessary including labour for

fixing of the fittings & fixtures as per drawing with wooden packing pieces if necessary (but excluding

the cost of fittings and fixtures with SS screws which shall be paid separately under relevant item),

including view panel wherever required as per drawing, finishing as specified all as per specifications,

drawings and as directed by Engineer In Charge.

30 mm thick flush door shutter (for shaft doors), With 1.0 mm thick decorative laminate sheet of

93.1 approved colour, pattern & shade fixed on one face of shutter and 1.0 mm thick white / off white Sqm 459.00 3,100.00

lamination on another face.

Providing & fixing Hollow Metal Pressed steel (HMPS) door frames of following profile fabricated out of

1.60 mm thick G.I sheet of coating (Class VIII of zinc coating) 120 gram/sqm, manufactured by Sail /

Lloyds/ Jindal or equivalent of profiles / size generally conforming to IS 4351-2003 with suitable

one/two set rebates for fixing shutters and also rebate suitable for fixing fixed glazing including hole

for self tapping screws wherever shown in the drawing, each frame to contain hinge jamb, lock jamb

and head all rigidly fixed together with welded /mechanical joints with back plates /angles to correct

shape & angles including providing and fixing base ties with GI channel 50x25mm, 1.25mm thick

suitable section to suit floor thickness / angle thresholds with MS angle 25x25x3mm, 6nos. of adjustable

lugs per frame, providing and welding of 40x40x5mm,150mm long angle cleats for hinges with

94 necessary tapped holes for fixing counter sunk headed machine screws to suit heavy duty oxidised / rmt 1,317.96 900.00

stainless steel hinges of size 125mm x 65mm x 2.8mm/125mm x 76mm x 2.80mm/ 100mm x59mm

x2.6mm/75mm x 48mm x 2.45mm or shop type welding and self taping screw for fixing hinges/ piano

and finishing the same to smooth etc. (but excluding the cost of hinges which shall be paid under the

relevant item) including providing each door frame with necessary lock strike plates, mortar guards,

buffers, bushes etc. required for tower bolt/ baby latches, tadis, safety chains, aldrops etc including

fixing the frame to brickwork/ concrete work with necessary PCCor bolted/ screwed to concrete

work, painting a shop coat of polyurethane paint including etching the surface with ETCH primer etc.

including painting the exposed surfaces with two coats of synthetic enamel paint of approved make

and colour over a coat of red oxide/ zinc chromate primer and painting the unexposed surfaces with

two coats of anti corrosive bituminous paint, after rectifying the damaged PU primer due to transport

including filling the hollows of door frame with C.C.1:2:4 using 12 mm size downgraded stone

aggregate, curing, finishing etc. all complete as per drawings, specifications and as directed by

Engineer in charge.

Note: The quoted rate shall include cost of base tie / angle and all accessories mentioned in the item

description except iron mongeries (i.e. fittings and fixtures with wood and machine/ self taped

screwsas required, which shall be measured and paid separately under relevant item.)

Profile 90mm x 60 mm with single rebate for doors.

Steel Fire Rated Doors with HMPS Steel Frames. Fire Resistant Door (FRD) assembly having 120 minutes

(2 hr) Fire rating, Metallic and conforming to IS 3614:2021 (Single / Double lef Shutter)

Providing and fixing factory made Fire rated door assembly of galvanised Iron Steel door frame with

mettallic single / double leaf door shutter with accessories, the entire door assembly including shutter,

frame and fittings shall be confirming to 1200 minutes (2 hr) fire rating as per IS

Frame:- The door frame shall be made of minimum 1.20 mm thick GI Sheet with minimum 120 GSM

coating as per IS:277. The frame shall be of grooved profile of minimum size 90 × 60 mm with inbuilt

sealing system to take appropriate fire rated smoke seal. Frame shall be provided with appropriate

reinforcement suitable for hardware and flush fixing. Frames shall be provided with stiffener pieces

and mitred cut joints (self tab/screwed assembled at site). Fire rated EPDM smoke seal, confirming to

IS 3614 : 2021 shall be fixed within the inbuilt groove or stuck with adhesive on the entire perimeter of

Door frames shall be fixed to all round the opening with minimum 8 mm dia CSK headed fastner of

minimum 80 mm long with 8mm dia Polyamide sleeves @ 3 Nos at each side.

Finishing: Frame to be factory finished with polyester powder coating of minimum thickness of

microns (500 hrs salt spray test) of approved colour and shade all complete as per manufacturer’s

Specification and direction of the engineer in charge.

Door Shutter: The factory made fire resistant mettallic door leaf shall be minimum 60 mm thick fully

flush double skin step design door, insulated with or without vision. Door leaf shall be manufactured

from 1.2 mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door

should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall not be

less than be 120kg/m3 high density mineral wool insulation material. Intumescent seals 15 x 1.5mm to

be provided. All ISI labelled doors shall be factory prepped for receiving appropriate hardware and

provided with necessary reinforcement for hinges, locks, and door closers panic bar etc. The edges

should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be

provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable shall

be maximum 200 x 450mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with

suitable gasket and with clip-on arrangement.

The door leaf shall be factory finished with polyester powder coating of minimum thickness of

microns (500 hours of salt spray test) of approved colour and shade all complete as per

manufacture's Specification and as per the directions of Engineer - in- charge.

Accessories Hardware: Fire doorset shall include all accessories like, Fire rated SS 304 grade ball

bearing type hinges of minimum size 100 mm ×75 mm × 3 mm one (3 numbers per leaf upto 2100 mm

height or as per test evidence), one number fire rated SS mortise lock with handle, fire rated door

Installation: Post installation hollow space within door frame shall be filled with fire rated self-

extinguishing type polyurethane foam. Rate shall include for supply and installation of complete door

assembly, by the manufacturer. (All mechanical and functional hardware like hinges, lever handles,

door closers with 120 minutes fire rating are to be used on doors and must conform to relevant IS

all as per manufacturer's specification and providing Fire Resistant certification (manufacturing &

installation) as required by local fire statutory authority shall be furnished by manufacturer of Door

assembly (Frame, Shutter, fitting) and all cutting/ planning if necessary, labour for fixing the fittings

and fixtures with suitable packing if necessary including providing and fixing 120 minutes (2 hr) fire

rated approved powder coated steel door set etc. all complete all as per specifications, drawings &

as directed by Engineer in charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor

96 spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all SQM 1.00 4,500.00

complete as per direction of Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer of

approved make conforming to IS: 3564 with ISI mark including necessary accessories and screws etc

97 for fixing with alumnium/ wooden/ steel doors with necessary bolts & nuts, labour, scaffolding etc NOS 207.00 1,250.00

complete all as per specifications and as directed by the Engineer-in-charge.

Providing, fixing & Supplying at site of work approved quality and manufacturer, confirmed & marked

with relevant IS (wherever applicable), Stainless steel (SS-304) fittings, fixtures and fastenings along

with Stainless steel screws/concealed SS screws, bolts, nuts, washers,wooden packing pieces if

98 necessary etc.and other accessories etc complete all as per specifications and as directed by the NOS 621.00 220.00

Engineer-in-Charge.

SS But hinges (Heavy Weight) of size (100 X 75 X 3.0 mm) , ball bearing type, (Two / Three leaf Hinges)

Providing, fixing & Supplying at site of work approved quality and manufacturer, confirmed & marked

with relevant IS (wherever applicable), Stainless steel (SS-304) fittings, fixtures and fastenings along

with Stainless steel screws/concealed SS screws, bolts, nuts, washers,wooden packing pieces if

99 necessary etc.and other accessories etc complete all as per specifications and as directed by the NOS 381.00 330.00

Engineer-in-Charge.

S. S. Tower bolt 300 mm long x 12 mm barrel

Providing, supplying, fixing approved make back to back stainless steel Handle-450 mm long (Set

including a pair of handles), of minimum 25 mm dia, including accessories for fixing it to glass,

100 aluminium, wood shutter, brackets etc.complete as directed by EIC. (Note:- Cost is for one set consists NOS 174.00 3,400.00

of two nos of handles to fix on shutter both side (Inside & Outside))

GRAB HANDLE FOR ADA TOILETS:

Providing & fixing 25 mm diameter (1.5mm thick) SS 304 satin (brush) finish Grab handle for disabled

toilet door of 600mm long of approved make with necessary SS 304 grade screws etc. complete as

per drawing as sample approved by Engineer-in-charge

Providing & Fixing 6- lever Mortice lock of chromium plated SS-304 parts & body of approved brand &

make, 200 mm Mortice latch & lock (without Handle Set) Lock Body CK mortice lock with chromium

plated SS screws, with duplicate keys etc. lock shall be fitted as per manufacturer specification and

as directed by Engineer in charge.

Providing and fixing Mortise shaft dead bolt with key (Alen Key lock) with 57mm backset and 25mm

103 square forend in stainless steel satin finish of approved make including all labour, material etc NOS 207.00 400.00

complete all as per specifications and as directed by the Engineer-in-Charge.

Providing, supplying, fixing glass to glass 6 lever SS patch lock (Round type) of approved make on

104 glass for doors complete as per drawing. Frameless Swing Doors (Patch Fitting Doors) NOS 1.00 750.00

Providing and fixing double action hydraulic floor spring of approved brand and manufacture having

ISI mark as IS : 6315, having brand logo embossed on the body / plate with double spring mechanism

for doors, including cost of cutting floors, embedding in floors as required and making good the same

matching to the existing floor finishing and having minimum 1.25 mm thickness stainless steel cover

105 plates with brass pivot and single piece M.S. sheet outer box with slide plate, and other accessories NOS 1.00 4,350.00

required for the works to facilitate smooth operation of the door shutter etc complete all as per

specifications and as directed by the Engineer-in-charge.

Sliding Windows: Providing, supply, fabrication, installing, fixing, testing, cleaning, protection and

handing over the Sliding window system, at all levels, locations, floors as per approved drawings

including all labour, material, wastage, transporation, fixing in position, scaffolding etc complete all

as per specifications, drawings and as directed by the Engineer-in-Charge.

The Sliding Window system shall with stand the wind pressure of confirming to IS -875 part III. The sliding

window system shall have SS-304 grade mesh Net shutter panel, drainage gutter profile at bottom

106 track, wool pile with film for weather protection and complete sir sealing. The shutter engagement

shall be minimum of 15 mm at top and bottom track to ensure stability under deflection of vertical

mullions. Including providing & fixing ball bearing rollers smooth movement of shutters, flush type lock

with manual opeartion, microwave cured EPDM gasket, non staining weather sealant, SS-304 grade

pan head screws etc complete.

Supplying and fixing in position at all floors, levels & locations, aluminium section [extruded] for

aluminium sliding windows sliding as per drawing of approved manufactures with extruded sections

of Jindal / Indal / Aluminax or other approved eqivalent sections with size and weights as shown in

the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S

specifications, with all approved shade & colour anodised aluminium fittings and accessories, locking

arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the

drawing, including providing and fixing aluminium channel beading / glazing clips fixed with

necessary matching anodised screws, grouting the gap with thermocole & polysulphide sealant etc.

all complete generally as per drawings, specifications etc., all as directed by Engineer in charge, but

excluding the cost of glazing, which will be paid separately. (The aluminium system consist of the

extruded aluminium sections of alloy 6063 T5/T6 & tolerances confirming to DIN / EN standards from

approved make and manufacturer.The aluminium sections shall have approved shade and colour

super durable powder coating with minimum 50 micron thickness. The non visible aluminium sections

shall have approved chromatizing treatment. {The weight of extruded aluminium sections only will be

mesured for payment}). The quoted rate shall be inclusive for providing & fixing built in handle with

locking nib/hook, dummy handle, SS locking closure plate (on frame), adjustable single roller, nylon

roller, shutter end PVC cap, anti dust plugs, screw hole cap, drain cap, wool pile etc of approved

make and design as per drawings.

Providing and fixing following type of approved quality glass panes for aluminium sliding windows, of

approved manufacturer and fixing with aluminium frame work including providing and fixing with

way EPDM gasketing , to ensure water and air tightness and neoprene cushions/ gasket

accommadated in grooves, necessary SS-304 screws etc all complete generally as per drawings

106.2 specifications and as directed by the Engineer-in-charge. Sqm 10.00 1,847.46

Note:- Only clear opening of glass shall be measured for payment.

( 6 mm thick Single Glass Unit (SGU) using heat strengthened (HS) clear float glass of M/s. Saint Gobain

ET/ST series or approved equivalent)

Providing & fixing stainless steel work for pipe hand rail at staircase, Entrance Ramp and other stainless

works such as spool pieces, pipe sleeves etc, at all floors, levels & location conforming to SS-304

grade of steel preferably schedule-10, using SS pipe in horizontal at top, vertical, inclined including

solid pipes as per drawing or as per pattern & design approved by EIC and including necessary S.S

bend, tees, Embeded plates, nuts, SS bolt,necessary welding, anchoring with SS anchor fastner of M/s

107 Hilti, grinding, buffing, polishing and fixing in concrete / wall with S.S lugs, making pockets, concreting, KG 17,289.41 650.00

making good the surfaces etc. as per specifications, drawings and as directed by Engineer-in-

Charge. ( Note:- For payment purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

108 Frameless Glass Railing

Design, Fabrication, Supply, Installation, Testing, Protection, Cleaning & Handover 1200mm height

glass (Above RCC ) Railing designed to with stand the wind pressure confirming IS 875 Part III and Live

load of 105 Kg/ m uniformly distributed load as per IS 875 Part II.

The system shall be support the glass at bottom continuous U-channel fixed on the finished floor level

and vertical glass to glass open joint with top Alum. Rail. 100mm Min. Glass In-build in the U-Channel.

The weather sealant of approved make, baker rod, SS 316 grade fasteners & hard setting blocks of

EPDM, all in complete required to perform as per specification and drawing in conjunction with BOQ.

Complete system shall be warranted for minimum 10 yrs against design & workmanship defects.

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard

from approved extruder. All visible surfaces shall have Anodized finish with minimum 22 micron.

All Material Make / Vendor list / Supplier list shall be as per tender specification.

All shade approval shall be as per Architect's Approval.

The quote rate shall include all design & shop drawing approval from architect & consultant.

108.1 Quote rate for complete system as mentioned above under (C). Including glass For Straight Railing.

RAILING GLASS : 17.52mm Laminated glass (8 mm Clear HS Glass + 1.52mm thk SGP Kuraray

Lamination + 8mm thk Clear HS Glass)

108.2 Quote rate for complete system as mentioned above under (C). Including glass For Curved Railing.

RAILING GLASS : 17.52mm Laminated glass (8 mm Clear HS Glass + 1.52mm thk SGP Kuraray

Lamination + 8mm thk Clear HS Glass)

Fabricating, supply and erecting in position Standard Structural steel sections conforming to IS 2062 for

all structural steel works using ISMB, ISA, ISMC, MS plate, flat, square bars, pipe, square pipe ,etc.

including welding, cutting, wastage, etc. complete. The rate is inclusive of welding road, supply &

fixing of correct size nut, bolts, washers, paint, with all contractor's materials, labour, tools & plants, in

bolted / welded construction as directed by Engineer-in-Charge. Anticorrosive paint must be applied

before applied any paint. The rate shall inclusive of providing and applying Epoxy Coating of

approved shade, brand and manufacture on new structural steel work with one coat of 30 micron

(DFT) of Epilux 4 Zinc Rich primer of Berger Paint India Ltd or equivalent as primer and Two coat each

of 35 micron (DFT) of Epilux 84 High Gloss CR enamel of Berger Paint India Ltd or equivalent at all

levels. (Total DFT is 30+35+35=100 microns). The waste cut pieces shall not be included in the paying

quantity. The work shall be done as per drawing and specification. The work shall be carried out as

per IS:800, IS:816 with its latest amendments.

110 Sleek Curtain wall system With Fins At (Ground To Second Floor)

Design, Fabrication, Supply, Installation, Testing, protection, cleaning & handover of Conventional

toggle curtainwall Sleek Blick / Lilli / Reynaers & VS1 system designed to withstand the wind pressure

of confirming to IS-875 part III. (The system must pass the proof test at 1.5 times the design wind

pressure without any failure). The profile system is based on capped curtainwall design and glass is

held all around by mechanical pressure plate and cap with microwave cured EPDM gaskets in all

four sides of glazing, with necessary brackets of Aluminium alloy of 6005 T5 / MS with HDG with three

dimensional adjustment with serrations and serrated washers to arrest the wind load movement,

Anchor Fasteners, screws and fasteners with non staining weather sealant and Aluminium flashing

sealed all around parameter inside and outside to seal the gaps between curtain wall and the

building structure all complete required to perform as per specification and drawing in conjunction

The system design shall be based on Open joint system & design shall include pressure equalization

with minimum 2 barrier gaskets for improved weather performance, drainage at all floor levels,

spandrel panel shall have pressure release slots on vertical side of profile system to avoid

condensation. Transom shall be overlap with mullion to have proper drainage to mullion. The design

to accommodate building movements, thermal expansions & the seismic movements. The system

shall be designed considering surface temperatures of 80-90 deg Cel & temperature differential of

deg cel without creating excess stress in the system. All metal joints in the wet area shall be small joint

sealant applied to ensure water tightness.

The system shall be designed of floor height units spanning between the floors with Dead load & wind

load brackets with provision to accommodate movement at all floor levels and at every grid panel

horizontally. The system shall lbe designed to accommodate vision/spandrel panel. The system shall

accommodate an openable panel as per the architectural requirements in the system. All fixed vision

glass and openable shall look similar in the elevation. Aluminium Edge Guard with black Anodised

shall be fixed at all vertical & Horizontal grooves. Each glass panel shall be supported for dead load

at the bottom of the glass with black anodised glass retainers, two per panel.

Flashing / Trim / Floor Closure at Parapet level, floor level, beam bottom level and required flashings

shall be provided continuously with the required GI / Aluminium sheet. Internal & External concelled

Flashings shall be 1.0mm thick GI sheet. All exposed flashing shall be 1.5mm thick. Aluminium sheet

with SDF coated, matching with external Aluminium profiles.

The extruded aluminium sections of Alloy 6063 T5 / T6 & tolerances confirming to DIN / EN standard

from an approved extruder. All the visible surfaces shall have high Durability (Akzonobel) / Super

durable (Jotun) Powder coating of 60 - 80 micron confirming to AAMA 2604. The non-visible aluminium

surfaces shall have a minimum chromatizing treatment.

All Material Make / Vendor list / Supplier list shall be as per tender specification. .

All shade approval shall be as per Architect's Approval.

The quote rate shall include all design & shop drawing approval from architect & consultant.

a.1 Sleek Curtain wall system

Quote rate for complete system as mentioned above under (A) Sqm 9,856.87 11,000.00

Vision Glass Straight: 19mm Thk. Sentry laminated glass providing & fixing the vision glass on the

8mm Thk. Clear HS Glass +3mm PVB Lamination + 8mm Thk.Reflective ET Series HS Glass (As per Client

/ Architect Approval sample)

Vision Glass Curved : 19mm Thk. Laminated Glass Providing & fixing the vision glass on the system

8mm Thk. Clear HS Glass + 3mm PVB Lamination + 8mm Thk.Reflective ET Series HS Glass (As per Client

/ Architect Approval sample)

a.2 Operable vent : Extra over a.1

Providing and fixing Top Hung Open Out (operable) vent accessories with heavy-duty self-balancing

stainless steel friction hinges with provision to hold open at 250 mm. Vent locking accessories with a

cremone lock and handle with a 6-point locking mechanism to keep the vent weather-tight. The vent

shall comprise of Aluminium outer frame with drainage provisions and crimped corners, and a shutter

frame with Euro grooves and crimped corners; all joints shall be sealed with small joint sealant. The

outer frame is fixed to the unitised profile system with necessary SS screws and weather sealant Sqm 216.00 6,500.00

applied at the outside and inside of the profile duly Super Durable Powder coating finish of 60-80

micron thickness as per the approved shade by the Architect. The stepped glass design vent shall

have ceramic frit in black / colour to match the glass at the portion of the stepped unit in case of

high light transmission glass to reduce banding effect in the glazing.

Providing and fixing 5mm thick various size of glass mirror on wall over 6mm thick plywood or plastic

fibre base, round up mirror edge and corner from the approved make as per selection of architect

and engineer in charge having basic rate as following - (Basic sqmt rate: 1940 Rs.)

111 (This item shall be procured / provided from selection as per approved make list, data sheet and Sqm 105.46 4,496.00

technical specifications.)

(Selection as per soft furniture data sheet)

Providing and fixing at all levels, locations and at all floors, 50 mm thick Reinforced precast Jali in C.C

1:2:4 of approved pattern, design and shape including pointing and proper joining of junctions with

112 ready mix cement mortar including all formwork, reinforcement, finishing the surface, curing, Sqm 705.08 1,600.00

scaffolding, hoisting, erecting & fixing in position etc complete all as per specifications and as

directed by EIC.

Providing and installing the speed breaker of PVC material with size of 250x350x50mm and/or

250x450x60mm on the cement concrete surface of the road with labour and all the necessary

accessories, hexacore design, oil resistance, chemical resistance, water resistance, UV stabilized, non

fading colors, with reflector tape.

Providing and fixing shock absorbing rubber corner guard having size 115x115mm, height 1000mm

and thickness 10mm, manufactured from flexible high strength rubber, embedded with highly

reflective weather resistance reflective material, tamper resistant, with black base and tape color

options in yellow, white and lime.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied

glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should

115 provide luminance coefficient on cement road shall be min 130 mcd/m2/lux and Asphalt road shall Sqm 417.30 307.38

be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the

section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two years.

Providing and installing outdoor convex mirror of size 600mm diameter, 130 degree viewing angle,

polycarbonate construction, vandal resistant with and without MS pole.

Supply, Installation, Testing, Commissioning of- Electromechanical boom barrier with a 3-meter boom

arm for car and 1.5mtr boom arm for bike lane, And a 0.6-second opening/closing time. Key features

include a corrosion-resistant powder-coated cabinet, die-cast aluminium motor with thermal

radiating and cooling fan, and 100% duty cycle with an MTBF of 10 million cycles. Safety features

117 include manual release, obstacle reversal, auto-closing, and support for external photocell and NOS 8.00 1,77,750.90

vehicle loop detectors. The system operates on 220V/110V at 50/60Hz, with IP54 protection, a motor

torque of 300Nm, and a working temperature range of 0°C to 65°C.

Supply, Installation, Testing, Commissioning of-Portable Cabin for the pay booth will be a compact,

mobile structure with dimensions of 6 feet length, 4 feet width, and 8 feet height. It will feature a

robust MS square pipe frame, sliding aluminium powder-coated windows with tinted glass, and a

rainwater protection guard. Insulated with 50mm glass wool for both the ceiling and side walls, the

cabin will be electrically equipped with AC 220-240V fittings, including sockets, tube lights, and a wall

118 fan. A wooden counter with locked drawers for storage will be included, along with safety features Nos 2.00 2,84,143.50

such as earthing and synthetic primer/epoxy paint finishes. The cabin will also have special lifting

hooks, vinyl flooring, along with 1-ton Split Air Conditioning unit fitted (1075 Watt) and all necessary

accessories for installation and commissioning.

Providing and fixing in Stainless steel Floor Mounted Dustbin with dimensions and design as per

Architect selection, in SS 316, Dual bins with 50 liters each having Matt / Mirror Finish including required

119 foundation, anchor bolts and fixing details etc. completed as directed by EIC. Including Minimum 2 NOS 25.00 15,208.00

mockups for approval complete as per instruction of engineer in charge.

SS Support For Green Wall With SS String

Design, Fabrication, Supply, Installation, Testing, Protection, Cleaning & Handover of SS 304 grade

provision support for green wall as per design intent. The entire assembly shall be fixed on SS

grade Support grid as per design drawings. The brackets shall be SS 304 grade fixed to the building

structure with necessary fasteners & anchor bolts in SS

Prefabricated grid SS 304 grade Support are fixed on to the RCC and concrete masonry walls with SS

316 anchor bolts as recommended by approved supplier to support given design loads. The brackets

shall have provision movement to accommodate the construction tolerances with + 35mm plumb in

120 case of RCC structure and + 20mm plumb in case of steel structure.

Provision main SS 304 grade support for vertical Garden system shall be installed in line with drawing.

All Material Make - Jacob.

All shade approval shall be as per Architect's & EIC Approval.

The quote rate shall include all design, engineering & shop drawing approval from architect,

consultant & EIC.

Rate as mentioned above under above item With 4mm thick. SS 304 grade String Vertical & Horizontal

900 c/c or as mentioned in drawings.

Entry Exit Totem

Providing and fixing at location a signs I sign -display signage with 100 mm depth Aluminium extrusion

Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from

virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15- 20 microns)

Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under normal working

conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way

adhesive. M.S fabrication slot of 65 mm depth for internal M.S structure.Media upto 6 mm thickness

can be pasted or mounted with help of dual lock tape .assembled totem can be edge lite with help

121 of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed NOS 2.00 97,750.00

with internal M.S structure are installed at site in plumb and level at specified location as per drawing

to the satisfaction of the engineer-in-charge. Graphics to be done using printed retro reflective

Size - 750mm * 1800mm * 100mm

Mounting Type - Ground/RCC

Signage - Lite/Nonlite (As per approved drawing)

Speed Limit/Info sign

Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European

standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous

billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with10 years

warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size

(octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.S

structure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into

fabrication, actthed to with 50mm depth aluminium frame for media signage mounting , with media

accomodation depth of 6mm , frame screw fitted at multiple position along vertical and horizontal

side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media

(ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with

fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat

site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-

charge. Graphics to be done using printed retro reflective material.

Size - 460mm * 600mm (Frame) * 2400mm Pole Height

Mounting Type - Ground/RCC

Signage - Lite/Nonlite (As per approved drawing)

Parking Suspended Signs

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is double sided 50 mm depth profile with media

accomodation depth of 6 mm media of ACP acrylic upto 3 mm thickness can be pasted directly on

frames or attched on frame with help of dual lock tape.Sign can be edge lite with help of edge lite

123 led modules ,led of LUCOLED make EL31 ,Sign to be fitted and installed at site in plumb and level at NOS 5.00 21,965.00

specified location as per drawing to the satisfaction of the engineer-in-charge. Graphics to be done

using printed retro reflective material.

Size - 1200mm * 300mm * 50mm

Mounting Type - Ceiling Suspended

Signage - Lite/Nonlite (As per approved drawing)

Door Nameplate Sign

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on

plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade

which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI

124 panels fitted and installed at site in plumb and level at specified location as per drawing to the NOS 20.00 776.25

satisfaction of the engineer-in-charge. Graphics to be done using printed retro reflective material.

Size - 300mm * 156mm * 12mm

Mounting Type - Door/Wall

Signage - Nonlite

Building Directory Sign

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with aluminium side tracks and

common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in

shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign

make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to

the satisfaction of the engineer-in-charge.

Size - As per Drawing

Mounting Type - Wall

Signage - Nonlite

Floor Directory Sign

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with aluminium side tracks and

common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in

shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign

make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to

the satisfaction of the engineer-in-charge.

Size - As per Drawing

Mounting Type - Wall

Signage - Nonlite

Staricase ID Sign

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on

plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade

which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI

panels fitted and installed at site in plumb and level at specified location as per drawing to the

satisfaction of the engineer-in-charge.

Size - 300mm * 156mm * 12mm

Mounting Type - Door/Wall

Signage - Nonlite

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on

plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade

which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI

128 panels fitted and installed at site in plumb and level at specified location as per drawing to the NOS 72.00 592.25

satisfaction of the engineer-in-charge. Graphics to be done using printed retro reflective material.

Size - 200mm * 156mm * 12mm

Mounting Type - Wall/Door

Signage - Nonlite

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on

plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade

which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI

panels fitted and installed at site in plumb and level at specified location as per drawing to the

satisfaction of the engineer-in-charge.

Size - 156mm * 156mm * 12mm

Mounting Type - Wall/Door

Signage - Nonlite

Lift Number Sign

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards

EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)

with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years

warranty under normal working conditions.Sign is single sided with 1 aluminium profile click fitted on

plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade

which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI

130 panels fitted and installed at site in plumb and level at specified location as per drawing to the NOS 60.00 592.25

satisfaction of the engineer-in-charge. Graphics to be done using printed retro reflective material.

Size - 200mm * 156mm * 12mm

Mounting Type - Wall/Door

Signage - Nonlite

Lift in case of fire use stair

Providing sign of Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008

tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium

grade anodizing (Thickness 15-20 microns) as peinternational standards, with 10 years warranty under

normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness

upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with

131 grub screws. Installed at site in plumb and level at specified location as per drawing to the NOS 48.00 807.30

satisfaction of the engineer-in-charge. Graphics to be done using printed auto glow material.

Size - 250mm * 150mm * 10mm

Mounting Type - Wall

Signage - Photoluminescent

Fire extinguisher Sign

Providing sign of Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008

tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium

grade anodizing (Thickness 15-20 microns) as peinternational standards, with 10 years warranty under

normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness

upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with

grub screws. Installed at site in plumb and level at specified location as per drawing to the

satisfaction of the engineer-in-charge. Graphics to be done using printed auto glow material.

Size - 300mm * 150mm * 10mm

Mounting Type - Wall

Signage - Photoluminescent

Emergency Exit Sign

Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface

mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins)

.Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of

hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20

(rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED

illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts,

symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up

staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and

133 non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 NOS 15.00 3,783.50

months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall &

celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high

tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at

site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-

Size - 310mm * 225mm * 55mm

Mounting Type - Ceiling

Providing & fixing in position heavy quality FRP bucket (UV resistant) of below mentioned size, at all

floors, levels & location having approved colour & shade, including labour, material, fixing

arrangements, screw, washer, scaffolding etc complete all as per specifications, drawings & as

directed by the Engineer-in-Charge.

134.1 1200mm L x 400mm B x 600 mm H, wall thickness minimum 4 mm. NOS 435.00 8,237.29

Aluminium Louvers (Box Type Louvers) System: Providing, supply, fabrication, installing, fixing, testing,

cleaning, protection and handing over the Aluminium box type louvers system, at all levels, locations,

floors as per approved drawings including all labour, material, wastage, transporation, fixing in

position, scaffolding etc complete all as per specifications, drawings and as directed by the Engineer-

135 The Aluminium box type louver system shall with stand the wind pressure of confirming to IS -875 part

III. The Aluminium box type louver system shall have louvers of size 100 mm X 50 mm X 2 mm thickness

vertical box louvers at 100 mm c/c. Including providing & fixing Aluminium frame to support

aluminium louvers, Louver profile shall be fixed at an angle (as per drawing) to form a frame,

necessary MS brackets with SS-316 fastners, EPDM gasket, non staining weather sealant, SS-304 grade

pan head screws etc complete.

Supplying and fixing in position at all floors, levels & locations, aluminium section [extruded] for

aluminium box type louver system as per drawing of approved manufactures with extruded sections

of Jindal / Indal / Aluminax or other approved eqivalent sections with size and weights as shown in

the drawing [including wastages if any] conforming to relevant I.S specifications, including grouting

the gap with thermocole & polysulphide sealant, providing & fixing MS brackets etc. all complete

generally as per drawings, specifications etc., all as directed by Engineer in charge. (The aluminium

135.1 system consist of the extruded aluminium sections of alloy 6063 T5/T6 & tolerances confirming to DIN / KG 5,520.00 450.00

EN standards from approved make and manufacturer. The aluminium sections shall have approved

shade and colour super durable powder coating with minimum 50 micron thickness. The non visible

aluminium sections shall have approved chromatizing treatment. {The weight of extruded aluminium

sections only will be mesured for payment}).

Providing, supply, fabrication, installing, fixing, testing, cleaning, protection and handing over the

Aluminium (Z-Type) louvers system, at all floors, levels & locations, aluminium section [extruded] for

aluminium Z type louver system as per drawing of approved manufactures with extruded sections of

Jindal / Indal / Aluminax or other approved eqivalent sections with size and weights as shown in the

drawing [including wastages if any] conforming to relevant I.S specifications, including grouting the

gap with thermocole & polysulphide sealant, providing & fixing MS brackets etc. all complete

generally as per drawings, specifications etc., all as directed by Engineer in charge. (The aluminium

system consist of the extruded aluminium sections of alloy 6063 T5/T6 & tolerances confirming to DIN /

EN standards from approved make and manufacturer. The aluminium sections shall have approved

shade and colour super durable powder coating with minimum 50 micron thickness. The non visible

136 aluminium sections shall have approved chromatizing treatment. {The weight of extruded aluminium KG 7,619.69 450.00

sections only will be mesured for payment}).

The Aluminium Z type louver system shall with stand the wind pressure of confirming to IS -875 part III.

The Aluminium Z type louver system shall have louvers of size as per drawing and thickness of Z shape

louvers, fixed at fixed distance (as per drwing) to alumnium frame, louver profile to be fixed on 3 mm

thick aluminium flat to form a frame, the louver frame is supported on the aluminium box frame

including providing & fixing SS-316 fastners, necessary MS brackets with SS-316 fastners, EPDM gasket,

non staining weather sealant, SS-304 grade pan head screws etc complete.

FOOD Kiosk Container – Providing, fabricating, supplying and installing in True line & level on

specified level as per detailed drawings for Pre-fab Factory Made Portable Container type Food Kiosk

Counter in Hot dip Galvanised Structural members and GI Sheet having size of 20' x 8' x 8' with

following facilities inside of each compartment as per specifications:

(1) Work table (Type 1) in one number of size 3910 x 600 x 925 mm or as per drawing and provision for

2 nos. under counter refrigerator to be made as per specification

(2) Work table (Type 2) in one number of size 2340 x 600 x 925 mm or as per drawing and to be

provided with 250mm height shelf under the counter top with SS supports & partitions.

(3) 2 no's SS Sink unit & bottom pipe shelf as per drawing & 1 no SS pipe shelf mounted above sink unit

on wall with SS 316; size: 1370x300 mm at 600mm from top of sink.The unit shall be fabricated with

openable shutter as shown in drawing.

(4) All the preparation tables & sink tables should have 16 GA fabrication sheet at the top and the

grade of steel used should be SS 316(Jindal Make).

137 (5) Side wall ventilation (type-1) in one number of size 755 x 158 mm to be provided horizontally as per NOS 12.00 17,50,000.00

drawing. Unit to consist of 03 such vents separated by the structural frame of the container as

indicated in drawings.

(6) Side wall ventilation (type-2) in two numbers of size 755 x 158 mm with exhaust fan (outer size

158x158mm)of preferred make and model as per drawing.

(7) Back wall ventilation (type -1) in three number of size 1175 x 158 mm to be provided horizontally as

per drawing. Vents shall be provided from the center of the wall and separated by the structural

frame of the container.

(8) Back wall ventilation (type-2) in two numbers of size 1150 x 158 mm with exhaust fan (outer size

158 X 158 mm)of preferred make and model as per drawing. All vents to be provided from the centre

of the wall separated by structural frame of the drawing. Each ventilation opening to have 50 mm

wide MS plate frame projecting from the outer surface of the container on all 4 sides.

(9) Two service windows with flap door of size 1360 x 1025 mm at the front longer side on container.

Window sill to be at 925 mm height from the container floor finish level.Each window to be fitted with

900mm height flap shutter foldable to 500mm, where the 500 mm portion serves as a counter top

when open and the remaining 400 mm folds back anchored to the container. Features include a

mm height perforated panel at the top, 03 hooks on the outside for counter anchoring, and 04 nos.

hook and stopper for internal closing.

(10)Main Door of size as per specification and drawing. Outside handle to be vertical D Type

(minimum 450mm high and 25mm diameter) with the top fixed at 1200mm from the door bottom.

Entry shall include 01 No. aldrop installed on the adjoining part and a door closer provided at a level

of 900mm from the door bottom. Inside shall be provided with a mortise handle set with lever mortise

lock (horizontal lock). Door must be fixed at a proper level to avoid obstruction while closing.

(11) Flooring to be covered with PVC vinyl sheet with proper drainage for water.

(12) Inner wall & ceiling shall be finished with Cement board including painting.

(13) 1 no Waste Bin Trolley below Sink with size of 375mm dia & 650mm Height with wheels.

(14) Three fans of 1200mm dia

(15) Electrification: It is provided with 6 Nos. of LED light (15Watt) & 6 No. 25Amp. Switch & socket &

on/off switch for commercial kitchen equipment, Points.

(16) To be provided with 1 no of water tank (Sintex/equivalent Make) made of Plastic having

capacity of 500 ltr. All welding joint should be TIG welded. The supplier should have manufacturing

set up should be certified with EN-15085 and ISO 9001:2015 from a recognized third party agency.

17) Supply and Fixing of mechinical foam type Fire Extingusher conforming to IS 15683:2018 as per the

required capacity of 6 liters to 9 liters.

Notes: 1) Contractor shall provide 10 years guarantee for container materials & facility inside material

& accessories including 1 year defect liabilities period & 4-years M&R scope.

2) Refer Container specifications attached in Specification Volume.

3) Contractor shall connect all water supply and drainage services to the given point in external

water and drainage network system as directed by EIC.

4) All the ironmongery shall be as approved by architect.

5) All structural members must be hot dip galvanised.

6) All Furniture shall have edge banding

7) All structural members shall be painted with 300-500 micron of Epoxy paint system with PU top coat

of 50-60 micron as per manufacturer specification with 10 years guarantee.

8) Container shall be fire proof & shock proof.

Providing and fixing in position, at all levels & loaction, stainless steel (SS-304) Mosquito Net/ Wire

Mesh/ Wire gauze made with 0.5 mm dia wire and 1.4 mm aperture (on both directions) including

fixing, cutting, wastage, scaffolding etc. complete all as per specifications and as directed by the

138 Engineer-in-Charge. Note:- 1) For aluminium work with aluminium beading channel. (Aluminium Sqm 21.00 957.00

beading channel will paid under relevant item).

Supplying, providing, placing, installing and fixing in position in true line and level as per detail

drawing approved by EIC, MODULAR TOILET PARTITIONS along with specified brand or approved

equivalent of size as per detail drawings, Floor mounted including providing and fixing all accessories,

fixtures, fastenings, hinges, anchorages, all hardware with approved locking arrangement as

recommended by manufacturer and as approved by EIC etc. complete as directed, at all levels.

Item description:

Cubicle size - 900mm x 1550mm x 2100 mm (height is including 150 mm gap from bottom).

Colour of Boards : As per the Shade card - approved by EIC. Thickness of Compact Sheet : 12mm

(min.). Material:Compact Laminate in panels. Made from solid grade compact high-pressure

laminate as per IS:2046 and EN438- manufactured under high specific pressure > 5 MPa and

temperature 120° C with bunch of kraft papers impregnated with thermosetting phenolic resin and

decorative papers made of cellulose fibre impregnated with thermosetting melamine resin which

139 provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with NOS 112.00 34,200.00

anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black

edge. Size of panels to be as per drawing.

Door size - 1750 x 600(H X W)

All doors will be of single colour and made of 12 mm thick HPL compact panel. The doors will have

chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the

pilasters. Stainless steel made coat hook and Lock set (comprised of Thumb turn and occupancy

indicator) are provided with each door. All the doors will be routed at the vertical ends and the

rubber sponge lining will be incorporated at the routed ends.

Pilaster dimension - 1830 x 300 (H X W).

All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed

with stainless steel made thumb turn lock set. Pilasters will be anchored to the floor using stainless steel

made adjustable legs. All pilasters will be routed at their vertical ends to facilitate closure of doors.

The bottom gap is 150-100 mm.

Dividers - 1775 x 1550 (H X W)

All intermediate partitions or dividers will be made of 12 mm thick HPL compact laminate panels.

They are affixed with stainless steel made U-channel at their ends for ultimate stability of the system.

Hardware and Accessories Details : below mentioned all accessories – Stainless Steel - 304 Grade

a) Adjustable Pedestal Footing of base diameter 60 mm made from Stainless steel grade 316 giving

an adjustable height of 100mm to 150mm. Surface finish to be matt type.

b) SS U -Channel

c) SS F Channel

d) SS Door Stopper Channel

e) SS Top Rail with circular cross section (Diameter 32mm). Surface finish will be mirror type.

f) SS Coat Hook with rubber stopper made from Stainless steel grade 304. Surface finish to be lacquer

g) SS Privacy Thumb turn c/w Occupancy Indicator made from Stainless steel grade 304. Surface

finish to be lacquer type.

h) Round Door knob diameter 30 mm with grooves for better hand grip made from Stainless steel

grade 304. Surface finish to be matt type.

I) SS Spring Loaded Butt Hinges with Cover

j) Anti-noise rubber padding of thickness 2 mm and width 10 mm

k) Screws & Wall Plugs. Stainless steel grade 304 screws.

l) Tubular panel holder made of stainless steel grade 304. Surface finish will be lacquer type.

m) Corner joinery section made from Stainless steel grade 304. Surface finish to be brush type. A thin

plastic film pasted for surface protection. Size to be 35mm x16.4mm x 0.8 mm.

n) Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish to be

brush type. A thin plastic film is pasted for surface protection. Size to be 21mm x 16mm x 0.8 mm.

Supplying, providing, placing, installing and fixing in position in true line and level as per detail

drawing and approved EIC, Modular Toilet Urinal partition UMP along with specified brand or

approved equivalent of size as per detail drawings, Colour of Boards : As per the Shade card -

approved by EIC.

Item description:

140 The Urinary Panel has a 12 mm thick High Pressure Laminates (HPL) Compact Board, with a NOS 58.00 5,750.00

recommended panel width dimensions of 400-500 mm. The size of the panel is 500 mm (W-Top) X

mm (W-Bottom) X 1200 mm (H), with the overall height of 1200 mm. Final Size of Partitions : As per

drawing given - shop drawings approved by EIC.

Accessories Details : below mentioned all accessories –

Stainless Steel - 304 Grade made 2 brackets used to fix each urinal panels to the walls.

Supplying and fixing in position various dia GI pipe for sleeves, using 'B' class (medium duty) GI pipes

of any diameter as per requirement and as per drawing for sleeves etc. including cutting, placing in

position, bending, welding, in line and level, at all levels & location including painting with one coat

141 of approved zinc chromate primer, scaffolding. labour, wastage etc. complete all as per KG 2,000.00 165.00

specifications, drawings and as directed by the Engineer in charge

Providing and fixing PVC rungs of Thickness 25mm, Length 170mm, Usage/Application Rungs, Stairs,

Standards IS Features. Anchor type fixing at all levels as directed by EIC.

Providing, supplying, and fixing modular welded mesh fencing system of approved make comprising

of galvanized MS wire mesh panels, pre-galvanized H-profile posts, anchors, and all necessary

accessories, complete in all respects.

Panel Material: Galvanised MS wire with min. 40 GSM coating and tensile strength > 65 kg/mm², Panel

Coating: Pure Polyester Powder Coating (PPC), thickness > 65 microns, tested for 1000 hrs in salt spray

(ASTM B117), Mesh Aperture Tolerance: ± 2 mm, Welding Specification: Electrical Resistance Welding,

Weld strength of 4 random welds ≥ 50% of vertical wire tensile strength, Panel Width: 2500 mm, Post C-

C Distance: 2515 mm, Post Type: Pre-galvanized MS, H-profile with 80 GSM zinc coating, Post Cap and

Anchor Cap: PVC, Anchors: GI anchor bolts M12 × 150 mm, Fixings per Post: 6 fixings for Mini, Regular,

Panel Size Options (as per site requirements): Mini: 1260 mm height, Post Lengths: 1300 mm

Installation Details: Posts fixed using M12 × 150 mm anchor bolts over concrete/paved surfaces.

Panels secured using anti-vandal tamper-proof fixings and brackets. Complete system installed

plumb, aligned, and in straight lines as per site drawing/layout. Rate to include supply, transportation,

all hardware (posts, panels, fasteners, caps, anchors), labour, equipment, layout marking, drilling,

surface preparation, fixing, finishing, and disposal of debris, etc., complete as per manufacturer’s

specification and direction of Engineer-in-Charge.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed together at the ends by end locks mounted on

144 specially designed pipe shaft with bracket plates, guide channels and arragements for inside and Sqm 8.82 3,468.72

outside locking with push-pull operation including the cost of hood cover and spring etc.

complete.(A)Shutters having width below 3.5 M.

WALL MOUNTED LED - Outoor

The scope of work includes the design, supply, installation, testing, and commissioning of a wall-

mounted digital screen. The exposed surface of the niche excluding the LED display area to be

finished in ACP powder coated sheet with necessary ply backing.The work also involves necessary

staging, testing of all functionalities, and commissioning to ensure full compliance requirements of

Project-In-Charge (PIC).

3mm thick ACP sheet powder coated in black (RAL 9005) with 8mm thick commercial plywood

backing WALL MOUNT DIGITAL SCREEN of mentioned size

145 The video system shall consist of active indoor Direct LED based seamless large screen video wall

system with front service access LED technology to reproduce excellent colors(up to 110% NTSC).

Contrast ratio Minimum 4000 :1, color processing depth of 24 bit, viewing angle 160º±5 degrees

(Horizontal & Vertical) . It will be necessary that the videowall along with controller can reproduce

excellent color reproduction with HDR10 and HLG. The LED cabinet/modules to be enclosed with

10mm MS profile powder coated in RAL 9005 (black), LED pixel P3

Adequate number of power/data cables and necessary controllers need to be considered by the

vendor for internal looping. Installation of this screen will be on the wall, the fabrication of mounts/

installation etc. shall be in vendor’s scope.

145.1 WALL MOUNT DIGITAL SCREEN 2M x 2.4M Sqft 57.75 10,500.00

145.2 WALL MOUNT DIGITAL SCREEN 2M x 9M Sqft 203.36 10,500.00

WALL MOUNTED LED - Indoor

The scope of work includes the design, supply, installation, testing, and commissioning of a wall-

mounted digital screen. The exposed surface of the niche excluding the LED display area to be

finished in ACP powder coated sheet with necessary ply backing.The work also involves necessary

staging, testing of all functionalities, and commissioning to ensure full compliance requirements of

Project-In-Charge (PIC).

3mm thick ACP sheet powder coated in black (RAL 9005) with 8mm thick commercial plywood

backing WALL MOUNT DIGITAL SCREEN of mentioned size

146 The video system shall consist of active indoor Direct LED based seamless large screen video wall

system with front service access LED technology to reproduce excellent colors(up to 110% NTSC).

Contrast ratio Minimum 4000 :1, color processing depth of 24 bit, viewing angle 160º±5 degrees

(Horizontal & Vertical) . It will be necessary that the videowall along with controller can reproduce

excellent color reproduction with HDR10 and HLG. The LED cabinet/modules to be enclosed with

10mm MS profile powder coated in RAL 9005 (black), LED pixel P3

Adequate number of power/data cables and necessary controllers need to be considered by the

vendor for internal looping. Installation of this screen will be on the wall, the fabrication of mounts/

installation etc. shall be in vendor’s scope.

146.1 WALL MOUNT DIGITAL SCREEN 1.2M x 1.5M Sqft 20.34 10,500.00

Sanitary Napkin vending machine

Supply and installation of a fully automatic electronic sanitary napkin vending machine fabricated

from a durable stainless steel chassis with a powder-coated finish suitable for wall-mounted

applications. The unit shall feature a storage capacity of 50 napkins and utilize a heavy-duty coin-

operated mechanism designed to accept multiple denominations for immediate dispensing. The

147 machine, with approximate dimensions of 50cm x 15cm x 30cm and a unit weight of 7kg, shall NOS 18.00 10,000.00

include an integrated electronic display for user instructions, a secure locking system for coin and

stock protection, and a reinforced collection tray. The scope of work involves providing all necessary

mounting hardware, wall fixings, and electrical connections to ensure a fully functional and secure

Drinking water fountain

Supply and installation of a wall-mounted drinking fountain manufactured from heavy-duty, corrosion

and stain-resistant stainless steel suitable for indoor and outdoor environments. The unit shall feature a

280 mm (11.02”) diameter basin with rounded safety edges, a 2.3 kg (5.1 lb.) chassis weight, and a

push-button valve for single-finger operation. The installation includes the secure mounting of the

mm H x 323 mm W x 356 mm D (8.8” H x 12.7” W x 14” D) unit to the wall structure to ensure a total

weight capacity of 45 kg (100 lbs). Work is to be complete with the provision and connection of all

necessary plumbing attachments, internal fittings, and hardware required for a fully operational

water dispensing system.

60L open top dustbin stainless steel silver 14x24 inch

Supply and placement of a heavy-duty, cylindrical open-top dustbin fabricated from 0.5 mm thick

SS202 grade stainless steel with a polished silver finish. The unit shall have a storage capacity of

liters and measure approximately 355.6 mm in diameter by 609.6 mm in height (14x24 inch). The

149 design shall feature a reinforced swing-open top for hygienic waste disposal and a durable body Nos 36.00 2,300.00

suitable for high-traffic indoor and outdoor environments. The scope of work includes the delivery of

the finished product to the site, ensuring all units are provided with compatible internal liners and

ready for immediate operational use.

35L open top dustbin stainless steel silver 10x28 inch

Supply and placement of a heavy-duty, cylindrical open-top dustbin fabricated from 0.5 mm thick

SS202 grade stainless steel with a polished silver finish. The unit shall have a storage capacity of

liters and measure approximately 254 mm in diameter by 711.2 mm in height (10x28 inch). The design

150 shall feature a reinforced swing-open top for hygienic waste disposal and a durable body suitable for Nos 126.00 1,600.00

high-traffic indoor and outdoor environments. The scope of work includes the delivery of the finished

product to the site, ensuring all units are provided with compatible internal liners and are ready for

immediate operational use.

External Illuminated Metal Letter Signage

Providing, fabricating, and fixing individual 3D letters for the signage “Riverside Savories” in SS-316

grade stainless steel (minimum 1.6 mm thick), in English/Gujarati as per approved architectural design

The letters shall be of size, depth, and profile as per detailed design and as approved by the Engineer-

in-Charge (EIC). Each letter shall be fabricated with necessary internal stiffeners and rigid SS back ties

to maintain true shape and alignment. The work includes providing and fixing all required

components such as SS plates, brackets, nuts, bolts, washers, studs, welding, and chemical anchor

fasteners of same or compatible material for firm and durable fixing to wall/tower structure, ensuring

stability, durability, and performance for a minimum period of 10 years.

The signage shall be provided with concealed waterproof LED backlighting/halo lighting system,

including routing and fixing of LED modules as per letter profile and curves to achieve uniform

illumination. LED colour and illumination effect shall be as approved by the Architect/EIC, ensuring

clear legibility and visibility from a long distance. The item includes supply and installation of all

151 necessary drivers, boosters, transformers, wiring, conduits, connectors, and allied accessories, properly NOS 1.00 5,50,000.00

concealed within letters or structure.

Where required as per design, provision of suitable external lighting fixtures such as spot lights, LED

fixtures, bollards, etc., shall be included to achieve the desired lighting effect.

The contractor shall submit the proposed font style, artwork (PDF format), and detailed shop drawings

including fixing methodology, LED layout, driver arrangement, and mounting details for prior

approval. A mock-up of minimum three letters with approved lighting effect shall be prepared for

review and approval before full-scale execution.

The rate shall include all materials, labour, fabrication, transportation, scaffolding, lifting

arrangements, safety measures as per applicable guidelines, testing, commissioning, and complete

installation at all heights. No extra payment shall be made for any component required to complete

the work in all respects.

Providing and laying weep hole in abutments, and returns by using PVC pipe of 100mm diameter

152 including laying in proper grade and jointing the completed as per detailed specification. NOS 50.00 552.77

Providing and installing scluptures from the below list as per architecture/vendor/artist design inluding

153 all necessary hardware, accessories, etc, as per the satisfaction of design intent provided by NOS 6.00 20,00,000.00

architect/vendor/artist and approval of engineer in charge (EIC)

Providing and filling Epoxy grout of approved make in 4mm to 6mm thick tiles joint including spacer

with cleaning of joint by vacuum or blower etc. Rate to include filling/grouting and finishing as per

the direction of EIC at all floors. Rate of the item to be considered in replacement of cementitious

grout as specified in individual flooring items.

Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam

or any other RCC member without vibration by core cutting (diamond drilling) machine of approved

make for laying service lines including scaffolding, safety measure, disposing the debris, cleaning,

making good, providing epoxy mortar/ micro concrete/ patch repair mortar for concrete for grouting

155 the gaps around the pipes for all levels/ all height, after approval of EIC etc. complete. Measurement

shall be taken for the depth of holes in running meter for specified diameter. Holes shall be made by

authorized approved agency. Scanning of reinforcement shall be carried out before core cutting if

required and as suggested by EIC. Location of core cutting shall be approved by EIC.

CORE CUT IN SLAB/BEAM - 200X200 mm NOS 1.00 1,811.94

CORE CUT IN SLAB/BEAM- 150X150 mm NOS 1.00 962

CORE CUT IN SLAB/BEAM - 100X100 mm NOS 1.00 905.97

CORE CUT IN RETAINING WALL - 250X250 mm NOS 1.00 7700.75

CORE CUT IN RETAINING WALL - 200X200 mm NOS 1.00 5435.82

CORE CUT IN RETAINING WALL - 150X150 mm NOS 1.00 3774.88

Providing & fixing precast approved brand FRP Composite Manhole covers as approved by

Competent authority / E.I.C tested as per IS:1726, including cost of necessary hardware, 1:2:4 grade

concrete for fixing frame, bed block (bearing course) and capping including necessary form work

and CM 1:2 mortar for fixing the frame & for plastering exposed surfaces of concrete bed block

(bearing course) and capping finished smooth with floating coat of neat cement etc., complete as

156 per specifications, drawings and as directed by the E.I.C. NOS 1.00 20,000.00

Square or Circular Recessed Extra Heavy duty (Grade HD - 35/40Ton Capacity designation as per

IS:1726/ C-250 as per EN124 or higher loading class) frame and cover of Size 600mm X 600 mm/

750mm X 750mm /900mm X 900mm or 600 Dia. or As per mentioned in Architect Drawing.

Note: Shade and Colour and design pattern to be get approved from Engineer-in-Charge.

Supplying and Grouting of Conbextra GP2 (FOSROC or approved equivalent) free flow, high strength,

Non shrink, cementitious precision grout below base plates of columns, trusses, equipment, around

foundation bolts, gap between pedestal top of columns and base plate etc. grouting should be

carried out with grouting gun including cleaning by water/ compressed air or suitable grouting

compound / chemical as per the manufacture's specifications including making the pockets for

157 concrete foundations, pedestals etc, as per the requirement, necessary formwork, cost of labour, SQM 5.00 2,100.00

materials, scaffolding, transportation, tools & plants, loading and unloading charges, devices for

grouting, finishing, all other incidental charges, etc. complete with lead & lifts at all levels etc

complete all as per specifications and as directed by Engineer-in-charge

Providing and fixing SS-304 grade stainless steel L-Profile (L-Patti) of approved size, shape and

thickness, finished with PVD coating of approved shade, fabricated by V-grooving and CNC bending

158 with true, straight and smooth edges, including cutting, placing, aligning and fixing in position with RMT 20.00 560.00

approved adhesive complete, as per approved drawings and directions of Engineer-in-Charge.

Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up

section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming to IS 2062 Grade Yst

350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL / RINL / TATA/JINDAL,

conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto 10mm ) in the profile shape as per

drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate

connectors, pinion joints, plates, hollow sections including Preparation of detailed fabrication and

erection drawings of Structural steel work from design drawings issued by Engineer-In-Charge and

incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication yard,

cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary

scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade.

158 The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure KG 19,000.00 220.00

has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam,

curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and

high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure

to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint

on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film

thickness) for each coat as specified in particular specification. The work is to be executed as per

technical specification and direction of Engineer-In-Charge.

Supply and Installation of membrane shall be PVC, Both side PVDF coating with HT Polyester Yarns of

1100 Dtex . Fabric Type 2 with minimum weight of 950 g/m2, minimum Tensile Strength (Warp/ Weft) -

4200/ 4000 N/5cm, minimum Tear Strength (Warp/ Weft) - 550/500 N. Fabric Flame Retadancy Rating

to be Euro Class - Bs2, d0, Micro Organism Resistance and minimum Warranty of 15 years. The design

complies with the requirements of BS and, EU Standards. The tensioned membrane structure shall

159 include engineering design of structural members and accessory parts. Membrane system shall SQM 1,236.00 4,025.00

include PVC/ PVDF coated Membrane Fabric, Wire Ropes and Cables, Shackles, Rigging Screws,

Clamps and tensioning hardware as per specification, drawings and engineers approval. Cost

including Scafolding and cranes.Make- Serge Ferrari/Verseidag/Mehler

Design, Supply, Fabrication and Installation of Membrane Panels. Membrane shall be Fiberglass

fabric EC 6 filaments and Both sides multi-layer Polytetrafluoroethylene reinforced coating having

minimum Weight of 670 g/m2. The Fabric shall have minimum 21% openness porosity for Maximum

Light Visibility with minimum Tensile Strength (Warp/ Weft) - 6000/ 6000 N/5cm, minimum Tear Strength

(Warp/ Weft) -500/500 N/5 cm. Fabric Flame Retardancy Rating to be Non combustible class A2/DIN

4102 — A2-s1,d0/EN 13501 — ASTM E136 — ASTM E84 — NFPA 701 —Cal T19. Warranty of 10 years and

Life span of 35 plus years with proven track record. The applicator to submit the fabric load analysis

for approval of fabric. Cost shall include the supply of fabric/SS Cables with end terminals minimum

25mm thickness for main grid and minimum 10mm thickness for edge cable alongwith all the

accessories. Fabric Flame Retardancy Rating to be Euro Class - Bs2, d0, Micro Organism Resistance-

160 Degree 0 Excellent – EN ISO 846-A and Warranty of 10 years and Life span of 30 plus years with proven SQFT 38,750.00 1,150.00

track record. The design complies with the requirements of BS and, EU Standards. The tension

membrane structure shall include engineering design of structural members and accessory parts.

Membrane systems shall include PVC/ PVDF coated Membrane Fabric, Clamps and tensioning

hardware as per specification, drawings and engineers’ approval. Vendor to provide an OEM

certificate for authorisation. The Mesh must withstand its Self-load and windspeed resistance of up to

180-200kmph. All the accessories like GI Cables, Turnbuckels,Brackets to be fixed to the

substructure/Civil work considering the weathering effects

(windspeed/loadbearing capacity/Structural strength).

Fabric analysis report shall be provided by vendor to understand the load calculation. Steel

consumption to be provided by vendor.The entire system has to be backed up by a structural stability

report.MS Built-up section/Tubular Structure ( MS built-up section :-Rolled section & plates confirming

to IS 2062 Grade Yst 350,Tubular Structure:- made from Steel hollow sections, ISI marked from SAIL /

RINL / TATA/JINDAL, conforming to IS 1161/4923/1239, Minimum Yst 240 thickness upto10mm ) in the

profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc.

with special plate connectors, pinion joints, plates, hollow sections including Preparation of detailed

fabrication and erection drawings of Structural steel work from design drawings issued by Engineer-In-

Charge and incorporation of Engineer-In-Charge's comments on same, ransportation from fabrication

yard, cutting , threading, machining, leads and lifts upto all heights, tools and plants and necessary

scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade.

The tubular structure system with plate connectors, pinion joints, etc. is to be provided. The structure

has to be provided as per conceptual drawings of Tensile fabric profile , including all arch beam,

curved lateral beams and bracings, vertical support columns, nodal joints, ,bases of columns and

high tensile bolts of grade not less than 10.9 having black phosphate coating. The complete structure

to be Hot Dip Galvinized along with one coat of epoxy primer and two coats of Polyurethane paint

on steel work at all locations prepared by sand blasting in required minimum 210 micron DFT (dry film

thickness) for each coat as specified in particular specification. Required detailed shop drawing and

sample is needs to get approved from the project Architect before execution on site. Work shall be

carried out as directed by the Engineer-In-Charge. Make List-SergeFerrari/Sherfil

/Chucko/F.I.T/Fibertech

ELECTRICAL & ELV CHAMBER

Construction of ELECTRICAL & ELV chamber of size 750x750x1200 mm including excavation,

backfilling, watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work

of M-30 for walls, top and bottom slabs, also having 100mm thick PCC in M-15 at bottom level. It shall

be plastered with 15mm thick Plaster with neat coat in CM 1:3 on internal including water proofing

and outside of chamber with 20mm thick sand faced cement plaster in two coat at all sides. making

161 core cuts/providing sleeves for cables incoming and outgoing Top shall be covered with FRP NOS 18.00 24,000.00

Recessed MH cover with clear opening of 600x600mm with frame and cover bearing load min. 25 T

and size as Mentioned in Drawing. It shall be completed with all respect in true line level, plumb with

neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

Construction of ELECTRICAL & ELV chamber of size 600x600x1000 mm including excavation,

backfilling, watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work

of M-30 for walls, top and bottom slabs, also having 100mm thick PCC in M-15 at bottom level. It shall

be plastered with 15mm thick Plaster with neat coat in CM 1:3 on internal including water proofing

and outside of chamber with 20mm thick sand faced cement plaster in two coat at all sides. making

162 core cuts/providing sleeves for cables incoming and outgoing Top shall be covered with FRP NOS 1.00 21,000.00

Recessed MH cover with clear opening of 600x600mm with frame and cover bearing load min. 25 T

and size as Mentioned in Drawing. It shall be completed with all respect in true line level, plumb with

neat & clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

Construction of ELECTRICAL & ELV chamber of size 450x450x900 mm including excavation, backfilling,

watering, soling, compaction, Reinforcement, Rungs etc. complete. It includes R.C.C work of M-30 for

walls, top and bottom slabs, also having 100mm thick PCC in M-15 at bottom level. It shall be

plastered with 15mm thick Plaster with neat coat in CM 1:3 on internal including water proofing and

outside of chamber with 20mm thick sand faced cement plaster in two coat at all sides. making core

163 cuts/providing sleeves for cables incoming and outgoing Top shall be covered with FRP Recessed MH NOS 4.00 17,500.00

cover with clear opening of 600x600mm with frame and cover bearing load min. 25 T and size as

Mentioned in Drawing. It shall be completed with all respect in true line level, plumb with neat &

clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction.

TOTAL CIVIL AMOUNT

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

SANITARY FIXTURES AND FITTINGS

SPECIAL NEED FOR DISABLED TOILET

Providing and Fixing EWC wall hung, Wash basin, Grab bar, Hinged rail & special faucet with spachula including seat cover, and flush valve, fittings, nuts, bolts and

gasket etc complete for disabled toilet of approved make and conforming to IS Standards. Wash basin with one pair mounting brackets, Waste coupling 32 mm size full

thread with 80 mm heightJaquar make with 7 years warranty: Chrome plated, Bottle trap Jaquar make with 7 years warranty: Chrome plated etc., EWC S Trap & Cistern

complete with fittings & seat cover, one no. hinged rail 750 mm & Two nos of grab rails 600 mm ,etc. complete as per directed by the Engineer's Representative.

EWC : KOHLER : S1013200

1.01 SOFT CLOSE SEAT COVER : CERA :B1520118

WASH BASIN : CERA : S2040159

SINGLE LEVER CLINICAL FAUCET: CERA :F9030453

600 MM LONG WALL MOUNTED GRAB BAR : CERA :B2210106

WALL MOUNTED HINGED HAND RAIL 750 X 100 : CERA : B2210108

Providing and fixing wash down wall mounting EWC-P of approved shade, conforming to Pattern 2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe and plug bend as

per specifications; glazed vitreous / Coloured European Water Closet with Metropole flush valve, connecting PVC 110mm dia soil pipe with PVC coupling, nuts,

mounting cistern on WC., Ragbolt, Gasket Fitiiing and solid verity heavy duty plastic seat cover as per IS-2548, of approved make; hole in walls/slab/beam and making

good etc. complete as per directed by the Engineer's Representative.

EWC-P with PP Soft close Seat cover, Cistern with cistern fittings:

W.C Wall Hung : Jaquar : SLS-WHT-6953BIPPSM/CERA : S1043144/KOHLER : K-20217IN-S-0

Concealed Cistern : HINDWARE : Hindware Cat No 525063/CERA : Cera Cat No B1110111

Providing and fixing in position 15 mm C.P. brass 2 way bib cock of best quality including cutting and making good the wall where required etc. complete as per

directed by the Engineer's Representative.

1.03 2 WAY BIB COCK

CERA : F1007151

KOHLER : K-16093IN-4-CP

Providing and fixing 15mm C.P. brass angle valve with wall flange complete, including cutting and making good the wall where required etc. complete as per directed

by the Engineer's Representative.

1.04 Angle Valve

Jaquar, Model No. :OPP-15053PM

CERA : F1019251

KOHLER : K-80154IN-4-CP

Providing and fixing of Hand Shower (Health Faucet), with 8mm Dia,1Rmt Long pvc Tube and Wall Hook accessories to .complete the item etc. complete as per directed

by the Engineer's Representative.

1.05 Health Faucet

Jaquar:ALD-CHR-563 GA

CERA : F8030106AB

KOHLER : K-98100IN-CP

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing White glazed vitreous Oval Wash Basin Under-Counter, size 560x430x195 mm., with supporting M.S. or C.I. Brackets, necessary pipe connection up to

the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, Waste coupling 32 mm size full thread with

80 mm height Chrome plated, Bottle trap Chrome plated , Pressmatic Pillar Cock including necessary fittings with wall Flange etc. complete in all respects including

cutting and making good the walls etc. complete as per directed by the Engineer's Representative.

Wash basin : Jaquar : FLS-WHT-570/CERA : OVAL- S2030102/KOHLER : K-2211IN-0

Waste coupling : Jaquar : ALD-CHR-705/CERA : F8050101/KOHLER : K-45432IN-BV

Bottle trap : Jaquar : ALD-CHR-769L300X190/CERA : CM 104B/KOHLER : K-75823IN-BN

Providing and fixing of C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete, including cutting and making good the wall where

required etc. complete as per directed by the Engineer's Representative.

Braided Hose Copper Pipe

Jaquar : ALD-CHR-805B

CERA : F8070402

Providing and fixing Pillar Cock of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.

complete as per directed by the Engineer's Representative.

1.08 Jaquar : PRS-001

CERA : F9020101

KOHLER : K-20747IN-8-CP

Providing and fixing white vitreous china flat back Urinal of size 385x325x635mm as per IS-2556 (Part-2) with C.I. hangers and pipe to wall with C.P. flange with

Sensotronic Sensor Type Urinal flush valve with installation box with control valve Battery / Electric operated automatic flushes of approved make. System provided with

a solenoid valve and valve connected to a 6 volts lithium battery. Unit automatically serves (the range in about 40 cms) and flushes in two steps. The pre flush is for

seconds duration and the final flushing is for 7 seconds duration. The outlet from the flusher shall be connected to urinal with required braided pipes from sensor to urinal

flush connection in fixture.

complete including cutting and making good the walls wherever required etc. complete as per directed by the Engineer's Representative.

Urinal :Jaquar : URS-WHT-13253N/CERA : S4020107/KOHLER : K-26474IN-ER-0

Urinal Sensor ,Jaquar, SNR-51097 /KOHLER : K-24199IN-C03-CP

Providing and fixing in position best Indian make toilet recessed type paper holder complete in all respects including cutting and making good the walls etc. complete

as per directed by the Engineer's Representative.

Toilet Paper Holder

Jaquar, Model no. ACN-CHR-1551

Providing and fixing electrical hand dryer, fully automatic type etc. complete as per directed by the Engineer's Representative.

1.11 Hand Dryer

Orchid: OR/HD/9KV P

Dolphy : DAHD0081 Nos. 73.00 15300.00

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing of Automatic Fragrance Dispenser fixed to wooden cleats with C.P. brass screws etc. complete as per directed by the Engineer's Representative.

1.12 Fragrance Dispenser: EURONICS, Model No.: EA44

Providing and fixing C.P. brass liquid soap container of best quality etc. complete as per directed by the Engineer's Representative.

1.13 Liquid Soap Container

Jaquar : K-5487K-CP

KOHLER : SDR-WHT-DJ0010F Nos. 73.00 11500.00

Providing and fixing Urinal partition with frosted glass approx. size 900 MM (H) X 450 MM (W) having 10 MM of glass thickness, including fixing to wall with suitable brackets

all as per manufacturers specification etc. complete as per directed by the Engineer's Representative.

Urinal Partition: Jaquar, Model No. JSE-CHR-110US450X

INTERNAL DRAINAGE AND RAIN WATER WORKS

(SOIL, WASTE, VENT AND RAIN

Providing WATER

laying and PIPING

jointing&inFITTINGS)

true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

2.01 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

2.02 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal stability for water

supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as

per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

Pipe Diameter above 50MM: UPVC (SCH 80)

2.03 The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail technical

specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing, laying and jointing in true line and level 110 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with eachother with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as

2.04 directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all

Providing and fixing in position cowel went topipes.

Providing & fixing PVC SWR TYPE B P Trap of 110 X 110 mm diameter with Height riser/ necessary 110MM Diameter of distance piece for wash basin/ sink drain connection

with cockroach trap - square flat cut, Satin-matt finish - 150mm x 150mm of approved Make, making necessary slab/ wall/ beam holes and cutting walls, etc. complete.

Making Khurras 45x45cm with average minimum thickness of 50 mm. cement concrete 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate of 20mm nominal size)

over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a QUOTE of neat cement rounding the edge sand making

2.07 and finishing the outlet complete depth as per site requirement.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter not less than 440grams.

Providing fixing, testing and commissioning in position 110 mm dia Polypropylene pipe ring fit conforming to EN: 1329, including all fittings such as bends, junctions,

inspection doors, offsets, cowl, access pieces/plugs etc. including cutting holes in walls, slab and beam and making good the same.(For Basement ceiling)

Providing fixing, testing and commissioning in position 160 mm dia Polypropylene pipe ring fit conforming to EN: 1329, including all fittings such as bends, junctions,

inspection doors, offsets, cowl, access pieces/plugs etc. including cutting holes in walls, slab and beam and making good the same.(For Basement ceiling)

Providing fixing, testing and commissioning in position 200 mm dia Polypropylene pipe ring fit conforming to EN: 1329, including all fittings such as bends, junctions,

inspection doors, offsets, cowl, access pieces/plugs etc. including cutting holes in walls, slab and beam and making good the same.(For Basement ceiling)

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

INTERNAL/EXTERNAL WATER SUPPLY NETWORK

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following

3.01 dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following

3.02 dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following

3.03 dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following

3.04 dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following

3.05 dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

3.06 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

3.07 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

3.08 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

3.09 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal stability for water

supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as

per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

Pipe Diameter above 50MM: UPVC (SCH 80)

3.09 The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail technical

specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal stability for water

supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as

per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

Pipe Diameter above 50MM: UPVC (SCH 80)

3.10 The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail technical

specification etc. complete the job.

Product to compliance with occupational safety standards.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and fixing unplasticized polyvinyl chloride (UPVC) pipes with all the engineered support as per detail technical specification, having thermal stability for water

supply including all UPVC plain and brass threated fitting. This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as

per direction of engineer in charge. Scope shall also including cutting, chasing the wall/beam by grinder cutter and making good the same.

Pipe Dia upto 50MM: UPVC (SCH 40)

Pipe Diameter above 50MM: UPVC (SCH 80)

3.11 The rate shall be including all the engineered support (support, hanger, nuts/bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail technical

specification etc. complete the job.

Product to compliance with occupational safety standards.

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard chrome plated ball /

stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water supply lines)

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard chrome plated ball /

stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water supply lines)

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard chrome plated ball /

stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water supply lines)

Providing and fixing male/ female screw ended full way lever operated forged ISI marked brass ball valves with brass body with forged brass hard chrome plated ball /

stem, union.Rated to temperature of 85 Deg C, The valves to be PN 10kgm class on CPVC or GI pipe lines. ( For cold water supply lines)

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing,

3.16 etc. complete.

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing,

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing,

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of class PN 10, including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Lowering, laying and jointing in position C. I. D/F Butterfly valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing,

Supply, Installation, Testing and Commissioning of Gun metal 25 mm dia. air release valve.

Supplying, fitting and fixing of SS 316, Solenoid Valve, confirming to latest IS 8935, PN 16.0, with IP 67 logic controller, float switch, IP 67 Battery, with all accessories viz.

power and control cables, cabinets, hardwares specials, union, flange, cable upto tank, lower & upper level floats with, 3 Nos. brass ball valves screwed ends, etc., to

3.21 complete the job.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Supplying, installation, testing and commissioning of 50 mm dia. Heavy Quality Gun metal Pressure Reducing Valve with set of best quality having by-pass arrangement

consisting of the following :

3.22 1 No. pressure reducing valve screwed ends,

3 Nos. brass ball valve screwed ends.

Woltman Type Bulk Water Meter- AMR Based:

Water Meter: 65 mm

Design, Supply, Installation, Testing, Commissioning of Woltman type Bulk Water Meter, CI/ Brass/ Bronze body material, totalizer made of copper can/ suitable anti

corrosive metallic material, totaliser metalic shall have 5 mm thick glass cover suitable against antifraud attempts, Flange End process connection, IP 68 protection class,

AMR Woltman Type Water Meter with removable mechanism, magnetic drive, dry dial, and be fitted with a low mass rotor which is parallel to the direction of water flow

and exhibits dynamic thrust relief, water meters complete with T Type strainer, ISO 4064 : 2005 with valid CE mark mentioning notified body number along with MlD / OIML

/ ISO certification from a recognized International laboratory.

3.23 AMR System shall be Walk By / Drive By mode, Wireless AMR trans-receivers shall be directly fitted on meter or inbuilt, IP 68 protection class, water meter & AMR Module

shall be of same brand, Single Command based AMR Reading and Minimum 90 days historical data retrive facility, alaram indication/ recording (for Reverse Flow, back

flow, Peak Flow,Minimum Flow, Low Battery Alram, Volume below threshold, Volume above threshold, Reverse Meter, Meter Stopped), Minimum 10 years of AMR module

bateery life considering one no. communication per day.

Construction of valve chambers in brick or bell stone masonry,locally available in CM 1:6.Foundation concrete 150 mm thick in C.C. 1:4:8 of trap metal size 25 mm to

mm thick,inside cement plaster in C.M. 1:3 and cement pointing outside in C.M. 1:3 and top cover of precast RCC slab 100 mma thick (with key hole in two parts,each

with handles or MS bar etc.complete as given size)UPto 1Mt. depth from G.L. to pipe invert incl.cpmplete civil works but excl. cost of excavation and refilling, with cast in

3.24 situ RCC slab in one sigle piece with fixing of CI-MH frame and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonary wall in C.M.:1:6

Size of chamber 0.60M X 0.60M and 1M depth

Making point of new connection from Existing/ Municipal water supply line with all support, clamps, civil work, etc. required, providing suitable fittings, to connect to

3.25 Existing line and good the same as per engineer in charge. Work to be done including Liasoning cost. Nos. 1.00 50000.00

IRRIGATION WATER SUPPLY NETWORK

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

4.01 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

4.02 fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

Supply, installation, testing and commissioning of 20mm diameter Garden Hydrant with gun metal Ball Valve, Flexible hose Connection Provision and all required

4.03 accessories etc. Nos. 36.00 3250.00

Supply, installation, testing and commissioning of Large dome type landscape drain is suitable for large planter areas and flower beds, where a thin layer of gravel is

4.04 used. It consists of a cast iron body, membrane clamp and a dome covered with a stainless-steel mesh. This product covers a greater drainage area and prevents the

soil and stones from entering the drainage line

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

EXTERNAL SEWAGE NETWORK

Providing and supplying 100 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

5.01 spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

(From GT to First Chamber)

Providing and supplying 200 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Providing and supplying 250 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.

5.04 (i) Square mouth traps.

A)100mm x 100mm size P type

Manufacture,supply and delivary of chemical fabricated RCC precast chambers with top cover as per specification and drawing attached with the tender documents

of sizes as mentioned below The delivary of chambers with clamps, nuts, bolts, and locking arrangment(without lock )is to be made to GWSSB store and sites anywhere in

Gujrat.The rates include all taxes, loading, carting, unloading, stacking including all taxes.

Sewage chamber of size 900x900 depth 0.90m.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1- Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1500mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) B type depth 1.5 Metre

Providing and constructing Sewer manhole ,scraper manholes and untill house connection chamber , as per the type design in brick masonary in C.M. 1:5 and inside

amd outside 20mm thick plastering in C.M. 1:3 necessary 100 mm caping with reinforcement in R.C.C.M. 200 fixing C.I. steps and fixing manhole fram and cover (But

excluding suppling of manhole cover)over manholes and house connection chambers and fixing manhole covers (But excluding suppling of manhole cover) over

5.07 scraper manhole etc.complete providing and fixing safety chain wherever necessary as per the stipulation in the type design complete as per latest CPHEEO

manul.(excl.excavation)

Manhole type "B" circular type having inside diameter of minimum 1500mm and for depth from1.5m to 4.0m(for 150 mm to 600 mm dia sewers)

Making connection to Municipal storm water line/ existing drain including breaking them in a systematic way with suitable excavation, dewatering, dismantling of the

RCC or masonry wall or pipe line, passing the plumbing storm water line in the existing structure either through masonry or RCC and providing suitable "Y" tee to the

connect to existing pipe line, Reconstructions of dismantled existing structure according to the original one to bring to the working conditions testing etc. work to be

done in the presence of municipal eng. including Liasoning cost. complete as per standard as directed by Engineer-in-charge to complete the job.

EXTERNAL STORM NETWORK

Providing and supplying 150 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Providing and supplying 200 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing and supplying 300 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Providing and supplying 400 mm Inner Dia. Pipe of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores

etc. complete.(ID Dia)

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.

Construction of Storm water chamber of size 450x450x600 mm (internal clear) making of RCC including excavation, backfilling, watering, soling, compaction,

Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and 100mm thick PCC in M-15 at

bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with adquate goliya at all sides. Top shall be

6.05 covered with FRP recessed Heavy Duty cover with Frame(450MMX450MM Clear Opening). It shall be completed with all respect in ture line level, plumb with neat &

clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Construction of Storm water chamber of size 600x600x1000 mm (internal clear) making of RCC including excavation, backfilling, watering, soling, compaction,

Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and 100mm thick PCC in M-15 at

bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with adquate goliya at all sides. Top shall be

6.06 covered with FRP recessed Heavy Duty cover with Frame(600MMX600MM Clear Opening). It shall be completed with all respect in ture line level, plumb with neat &

clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Construction of Storm water chamber of size 900x900x1500 mm (internal clear) making of RCC including excavation, backfilling, watering, soling, compaction,

Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and 100mm thick PCC in M-15 at

bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with adquate goliya at all sides. Top shall be

6.07 covered with FRP recessed Heavy Duty cover with Frame(600MMX600MM Clear Opening). It shall be completed with all respect in ture line level, plumb with neat &

clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

Construction of Storm water chamber of size 1200x1200x2000 mm (internal clear) making of RCC including excavation, backfilling, watering, soling, compaction,

Reinforcement etc. complete. It includes M 30 RCC work for walls , top slab and bottom slab as per the drawing, having Rubble soiling and 100mm thick PCC in M-15 at

bottom level. It shall be plastered with 20mm thick Plaster with neat coat in CM 1:3 on internal and outside of chamber with adquate goliya at all sides. Top shall be

6.08 covered with FRP recessed Heavy Duty cover with Frame(600MMX600MM Clear Opening). It shall be completed with all respect in ture line level, plumb with neat &

clean surface as per coordinated infrastructure detail drawing up to the level of satisfaction

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Making connection to Municipal storm water line/ existing drain including breaking them in a systematic way with suitable excavation, dewatering, dismantling of the

RCC or masonry wall or pipe line, passing the plumbing storm water line in the existing structure either through masonry or RCC and providing suitable "Y" tee to the

connect to existing pipe line, Reconstructions of dismantled existing structure according to the original one to bring to the working conditions testing etc. work to be

done in the presence of municipal eng. including Liasoning cost. complete as per standard as directed by Engineer-in-charge to complete the job.

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

PUMP AND EQUIPMENT WORKS

Providing and fixing S.S. water cooler of 80ltr storage capacity with 60ltr per hr. cooling capacity. Including inbuilt R.O.Plant consisting of considering the inbuilt booster

pump,dry run protection, water purification filters, piping, isolation valves, instruments supports, etc. complete & Medium Penetration UV. Including all Inter connection

piping and valve all comp. System as per drinking water IS stadard requirment. it is recommendate to provide blending system of water at attain TDS level between 250-

7.01 300 ppm. The suppliear has to also supply and installation of SS-316 storage tank - 80 ltr. capacity.

WATER TRANSFER PUMP (For Domestic Water Supply)

Centrifugal Monoblock Transfer pump

Supplying, installing, testing and commissioning of Horizontal / vertial multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, SS-

304/C.I. Base CED coating & head TEFC IE3 motor (with mechanical seal) with Company fitted with company compliance certificate. Vendor to submit performance

curves and technical catalogue with all GA Drawing of the proposed model for review and information.

Panel mounted PLC and HMI Based multi pump contoller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a Panel

with IP55 class with pressure sensor transmitter (each pump each VFD), diodes to indicate pump ready, pump running and fault and capable to communicate with

other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. All alarms should be displayed in the controller. System should be equipped with

7.02 dry running protection. Indication of all type of faults / on-off status / electrical parameters shall be available on panel.

Set of accessories such as G.I headers for suction and discharge, control valves, non return valves, pressure transducers, pressure gauge, inter connecting power and

control cabling etc. complete.

Capacity per pump - 20.0 m3/hour, Head - 50 mt, 1 Set = 3 Nos. Pump (2 Working +1 Asist - cascade operation)

IRRIGATION PUMP

Centrifugal Monoblock Transfer pump

Supplying, installing, testing and commissioning of Horizontal / vertial multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impeller and SS-304 shaft, SS-

304/C.I. Base CED coating & head TEFC IE3 motor (with mechanical seal) with Company fitted with company compliance certificate. Vendor to submit performance

curves and technical catalogue with all GA Drawing of the proposed model for review and information.

Panel mounted PLC and HMI Based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a

Panel with IP55 class with pressure sensor transmitter (each pump each VFD), diodes to indicate pump ready, pump running and fault and capable to communicate

with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. All alarms should be displayed in the controller. System should be equipped

7.03 with dry running protection. Indication of all type of faults / on-off status / electrical parameters shall be available on panel.

Set of accessories such as G.I headers for suction and discharge, control valves, non return valves, pressure transducers, pressure gauge, inter connecting power and

control cabling etc. complete.

Capacity per pump - 7.5 m3/hour, Head -45 mt, 1 Set = 2 Nos. Pump (1 Working + 1 Standby).

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Sump Drain Pump (For Basement Drain, Pump Room Drain)

Supply, installation, testing & commissioning of Submersible Non Clog, single stage, single entry pumps connected to TEFC submersible motor for 415 + 10% volts, 3 phase,

50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe.

(Pumps suitable to handle solids upto 50 mm size with C.I. body, SS304 shaft, SS impeller).

Pump Outlet shall be individual for both pumps and shall be connected to main drain line individually.

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors Potential free

7.04 contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter

alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below. The operations data for all pumps shall

be available on central BMS system

Capacity per pump - 15.0 m3/hour, Head -20 mt, 1 Set = 2 Nos. Pump (1 Working + 1 Asist - cascade operation)

Sump Drain Pump (For Tunnel Drain)

Supply, installation, testing & commissioning of Submersible Non Clog, single stage, single entry pumps connected to TEFC submersible motor for 415 + 10% volts, 3 phase,

50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe.

(Pumps suitable to handle solids upto 50 mm size with C.I. body, SS304 shaft, SS impeller).

Pump Outlet shall be individual for both pumps and shall be connected to main drain line individually.

Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors Potential free

7.05 contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter

alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below. The operations data for all pumps shall

be available on central BMS system

Capacity per pump - 300 m3/hour, Head -10 mt, 1 Set = 2 Nos. Pump (1 Working + 1 Asist - cascade operation)

SPRINKLER , DRIP & HYDRANT IRRIGATION SYSTEM

Providing, installing, testing and commissioning of HDPE pipes confirming to IS 4984 or ISO 4427 suitable for the respective working pressures with all electrofusion or

compression type PN16 fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers'

8.00 instruction,with Excavation & Backfilling upto 600mm for main and 450 mm for submian depth Make : Reliance/EmiratesGermany/Smartflows/Supreme

8.01 HDPE Pipe 160mm PN 8 Rmt. 1.00 1,499.15

8.02 HDPE Pipe 140mm PN 8 Rmt. 1.00 1,161.86

8.03 HDPE Pipe 110mm PN 8 Rmt. 1.00 753.39

8.04 HDPE Pipe 90mm PN 8 Rmt. 1.00 452.54

8.05 HDPE Pipe 75mm PN 8 Rmt. 1.00 345.76

8.06 HDPE Pipe 63mm PN 6 Rmt. 1.00 269.49

Providing & fixing of following dia. white PVC pipe conforming to ASTM D 1785 SCH 40 or D 2241 Class 200/315 standards with all fittings and accessories e.g. couplings,

tees, bends, reducers, screwed adapters, flanged tail pieces etc. as required with Excavation & Backfilling upto 450mm for for submian depth. Make:

Rainbird/Astra/Smartflows/Supreme

8.07 PVC Pipe Sch 40 / Class 200 2.5" - 65mm Rmt. 1.00 525.42

8.08 PVC Pipe Sch 40 / Class 200 2" - 50mm Rmt. 1.00 352.54

8.09 PVC Pipe Sch 40 / Class 200 1-1/2" - 40mm Rmt. 1.00 280.51

8.10 PVC Pipe Sch 40 / Class 200 1-1/4" - 32mm Rmt. 1.00 246.61

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

9.00 Drip & Accessories

Providing, installing, testing and commissioning of 16mm inline tubing with pressure compensating,, Flat emitter and resistance to UV damage, algae growth brown in

colour from outer surface and black innter surface, with flow rate 3.4 lph, dripper spacing 18" Pressure rating 0.58 to 4.1 kg/cm2 wall thickness 1.2mm The flexible

polyethylene tubing shall have factory-installed pressure-compensating, inline emitters installed every 18 inches. The flow rate from each installed inline emitter shall be

3.4 Litre per hour. The inline emitter shall be pressure compensating with a spring-action design which will provide a a self-rinsing mechanism if grit accumulates within the

emitter. The bend radius shall be 3 inches whether bending the tubing with the natural bend of the coil or against it. The inline emitter inlet shall be raised off the inside

tube wall to minimize dirt intrusion. Make: Rainbird/Smartflows/Toro/Netafim

Providing of 16 mm - 4 Bar Pressure Rating, 1.2mm Thickness, LEED Compliant, PE pipe -together with all required accessories. Make : Netafim / Rain Bird / Smartflows

9.02 (Brown Colour) Rmt. 1.00 - -

9.03 Providing Pressure Comp. Bug Dripper 4 to 20 PLH Make : Netafim / Naan Dan / Rain Bird NOS 1.00 - -

Providing, installing, testing and commissioning of High Quality kg/cm2bs Grab Tubing for a Secure Fit. Unique kg/cm2b Design to Reduce Insertion Force. Non -

9.04 Obtrusive 17mm Insert Fittings - Brown Color - Take Off Adopter, Elbow,Tees, End Cap with PP Clamp Saddle having nuts and bolts in zinc chromed steel, o-ring gasket Set 1.00 251.69

in NBR. Male: Rainbid/Toro/Smartflows/Netafim

9.05 Providing, installing, testing and commissioning of 9" Long Galvanized Lateral Hold Stake Make: Rainbird/Toro/Smartflows/Netafim Nos 1.00 14.41

Providing, installing, testing and commissioning of Subsurface Dripline 16mm 30CM 2.3 LPH, 4 Bar Pressure Rating, 1.2mm Thickness together with all required accessories.

9.06 Make: Netafim, Rain Bird, Smartflows (Brown Color) Rmt. 1.00 111.86

10.00 Sprinklers & Accessories -

Providing, installing, testing and commissioning of Supply,Fixing & commissioning of 1" Rotor pop up sprinkler full/part circle having radius of 17.20m @ 3.0 kg/cm2 with

discharge of 0.74 ltr./sec. the sprinklers having Arc Adjust through Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 1" bottom inlet.

Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal. Having

10.01 internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler should be of non - corrodible, heavy Each 1.00 2,992.37

duty, ABS plastic.O-ring Slip Clutch,Racheting Slip Clutch and having 4” (10.2 cm) pop-up height to center line of nozzle to clears taller turfgrass Make:

RainBird/Toro/Weathermatic

Providing, installing, testing and commissioning of 1" X 12" lONG Pop up Connecting Swing joint Assembly. The swing joint shall be molded from rigid PVC, Type 1, cell

classifi cation 12454-B, conforming to ASTM D1784, with a pressure rating of 315 psi (21,6 kg/cm2) at 73° F (22° C) when tested in accordance with ASTM D3139, including

60 minutes at 790 psi (54,1 kg/cm2), and short term exposure of1000 psi (68,5 kg/cm2) without leakage. All NPT threads, sockets, and spigots shall be Schedule 80 per

ASTM D2464 and D2467. All components shall be factory preassembled, available with 1" (2,5 cm), inlet/outlet and in lengths of 12" (45,7 cm). Spigot inlets shall be

10.02 available for 1" (2,5 cm) swing joints. All rotating joints shall be modifi ed stub ACME threads. All rotating joints shall have two EPDM rubber O-rings for positive sealing and Each 1.00 2,591.53

thread protection. The swing joint shall have oversized threaded inlets with large grips and visible thread stops to make hand tightening and blind (underwater)

installations easier with with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket.Make: Lasco/Toro/Rainbird/Smarflows/Astore

Providing, installing, testing and commissioning of Supply,Fixing & commissioning of 3/4" Rotor pop up sprinkler full/part circle having radius of 10m - 12m @ 2.5 kg/cm2

with discharge of 0.22 ltr./sec. the sprinklers having Arc Adjust through Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet.

Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The

sprinkler shall have Plus (PL) Flow shut off feature for maintanace and nozzle insertion online, 45 psi pressure regulator with flow optimizer technology, internal Seal - A -

10.03 Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler should be of non - corrodible, heavy duty, ABS plastic.O- Each 1.00 1,338.98

ring Slip Clutch,Racheting Slip Clutch and having 4” (10.2 cm) pop-up height to center line of

nozzle to clears taller turfgrass Make: Rainbird/Toro/Weathematics

Providing, installing, testing and commissioning of 3/4" x 12" Long Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness

of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant

10.04 thermo plastic with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket. Make: Lasco/Toro/Rainbird/Smarflows/Astore Each 1.00 343.22

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing, installing, testing and commissioning of 4" Pop up spray head with SAM PRS Series Spray bodies, having Co-moulded wiper seal is moulded into the cap and

10.05 features an encased plastic 'cage' to provide resistant to grit, with 2.4 to 5.4 Mtr Radius with Check Valve, complete with required nozzle Make : Rain Bird/ Toro/ Each 1.00 - -

Providing of Shrub Spray Pop-up Sprinkler 6" (6" Pop Up hight from Bottom to Centre of Discharging Nozzle) from (2.4 to 5.4 Mtr Radius) with Check Valve, complete with

10.06 required nozzle Make : Rain Bird/ Toro/ Weathermatics Each 1.00 - -

Providing, installing, testing and commissioning of 4" Pop up spray head with SAM PRS Series Spray bodies , having Co-moulded wiper seal is moulded into the cap and

10.07 features an encased plastic 'cage' to provide resistant to grit, with Spray nozzle having nozzle capable of covering 2.4 to 5.4 Meter radius. Make: Each 1.00 627.97

Rainbird/Toro/Weathermatics

Providing, installing, testing and commissioning of 4" Pop up spray head with SAM PRS Series Spray bodies , having Co-moulded wiper seal is moulded into the cap and

features an encased plastic 'cage' to provide resistant to grit, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap

and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle capable of covering 4.0-7.3m at 1.4 - 3.8 kg/cm2s pressure, and the enviroment.

10.08 Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to 270 degree or full circle,True flushing mechanism,Thick streams and large water droplet & Each 1.00 711.02

Low precipitation rate. Make: Rainbird/Toro/Weathermatics

Providing, installing, testing and commissioning of 12" Pop up spray head with SAM PRS Series Spray bodies , having Co-moulded wiper seal is moulded into the cap and

features an encased plastic 'cage' to provide resistant to grit, with Rotary nozzle having mutilple stream MPR sprayhaving Co-moulded wiper seal is molded into the cap

and features an encased plastic 'cage' to provide unmatched resitence to grit, nozzle capable of covering 4.0-7.3m at 1.4 - 3.8 kg/cm2s pressure, and the enviroment.

10.09 Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to 270 degree or full circle,True flushing mechanism,Thick streams and large water droplet & Each 1.00 711.02

Low precipitation rate. Make: Rainbird/Toro/Weathermatics

Providing, installing, testing and commissioning of 1/2" x 12" Long Pop up Connecting Swing joint Assembly. The tubing shall be made of polyetylene having wall thickness

of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant

10.10 thermo plastic with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket Make:Lasco/Toro/Rainbird/Smarflows/Astore Each 1.00 318.64

11.00 Providing of Various Valves with required Fittings & Tapping PP Clamp Saddles with Chromed Nut Bolt & Nitrile Rubber Ring -

Providing, installing, testing and commissioning of 2" 50mm Gate Valve, MOC Brass, Non Rising Stem, Full Port, 200 / 14 kg/cm2 PSI, BSPT Make: NIBO/LEADER/Leemco

Providing, installing, testing and commissioning of 1-1/2" 40mm Gate Valve, MOC Brass, Non Rising Stem, Full Port, 200 / 14 kg/cm2 PSI, BSPT Make: NIBO/LEADER/Leemco

Providing, installing, testing and commissioning of PVC Butter Fly Valve 160mm (6") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

Providing, installing, testing and commissioning of PVC Butter Fly Valve 140mm (5") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

Providing, installing, testing and commissioning of PVC Butter Fly Valve 110mm (") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

Providing, installing, testing and commissioning of PVC Butter Fly Valve 90mm (3") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

Providing, installing, testing and commissioning of PVC Butter Fly Valve 75mm (2.5") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

Providing, installing, testing and commissioning of PVC Butter Fly Valve 63mm (2.0") PN 10, having EPDM Seals, Galvnized Steel Stem Disc - PVC U Make: Astore/GF/FIP

11.09 Providing, installing, testing and commissioning of PVC Flush Valve 40mm Make: Rainbird/Smartflows/Netafim NOS 1.00 238.98

11.10 Providing, installing, testing and commissioning of 3/4" Quick Couppling Valve Make: Rainbird/Toro/Smartflows NOS 1.00 5,870.34

11.11 Providing, installing, testing and commissioning of 3/4" Quick Couppling Valve Key Make Rainbird/Toro/Smartflows NOS 1.00 5,728.81

Providing, installing, testing and commissioning of Saddle Tee 160/140/110/90/75/63mmX3/4" witth ASTM Pipe (12" Long) Make Asore/Smartflows/Astral

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

11.13 Providing, installing, testing and commissioning of Swivel Elbow 3/4" X 3/4" - Rainbird/Toro/Smartflows NOS 1.00 6,281.36

Providing, installing, testing and commissioning of 1" - 25mm Double Acting Air cum Vacum Release Valve, Body: Glass-reinforced Nylon, Float Assembly: Polypropylene,

11.14 Elastomers: EPDM, operating pressure minimum 0.1 kg/cm2, maximum 10 kg/cm2, Aerodynamic full-body kinetic shield, Straight flow body with large diameter orifice size NOS 1.00 1,801.69

0.787mm dia and area of 0.496 sqmm Make:Bermad/Rainbird/Crispin

Providing, installing , testin and commissioning of PP Saddle Tee 160/140/110/90/75/63mmX1" witth ASTM Pipe (12" Long) Make: Astore/Smartflows/FIP/Astral

Providing, installing, testing and commissioning of 12" Rectangular Standard Commercial grade Valve Box with greenlid and corrugated structure with unique shovel

11.16 access slot and bolt hole knockout & having Dimensions @ Top Opening:14.5" L X 9.4" W 12.1" H & bottom opening :18.7" L X 14.1"W with Nut Bolt Lock Make: NOS 1.00 4,065.25

RainBird/Toro/Smarflows

Providing, installing, testing and commissioning of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout &

11.17 Having Dimensions @ Top Opening 8.9" Dia & Bottom Opening 11.9" Dia,with Nut Bolt Lock, Make: RainBird/Toro/Smarflows NOS 1.00 2,494.92

Providing, installing, testing and commissioning of 6"Round box with greenlid Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia, with Nut Bolt

11.18 Lock, Make: RainBird/Toro/Smarflows NOS 1.00 601.69

Providing, installing, testing and commissioning of 12" Jumbo Rectangular Standard Commercial grade Valve Box with greenlid and corrugated structure with unique

11.19 shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18.7" L X 12.2" W & bottom opening :24" L X 17.5 "W X 12.1" H, with Nut Bolt Lock Make: NOS 1.00 7,760.17

RainBird/Toro/Smarflows

Providing, installing, testing and commissioning of 4.0" Hydro Meter - Water Meter cum Master Valve in one common body Make:Rainbird/Bermad/Smartflows/Cal-Valve

Providing, installing, testing and commissioning of 2.0" Hydro Meter - Water Meter cum Master Valve in one common body Make:Rainbird/Bermad/Smartflows/Cal-Valve

12.00 Providing Automation Items for Irrigation with all its required accessories.

Providing, installing, testing and commissioning of 230V Input, DC output Irrigation Controller combines electromechanical and microelectronic circuitry capable of fully

12.01 automatic or manual operation. Make:Netafim/Toro/Rainbird Set 1.00 1,15,646.61

Providing, installing, testing and commissioning of D.C. 2"-50mm Durable Glass filled nylon Solenoid Valve - BSP Female Threaded, with Nylone scrubber / Filter Sentry

12.02 Pressure - 1 to 13.8 kg/cm2 along with Filed Device - DC Solienoid Coil with interface module in-built in one device mountable on Solenoid Valve to connect Controller Nos 1.00 20,105.08

and Valve on one wire path Make: Bermad/Netarim/RainBird/Toro

Providing, installing, testing and commissioning of D.C. 1.5"-40mm Durable Glass filled nylon Solenoid Valve - BSP Female Threaded, with Nylone scrubber / Filter Sentry

12.03 Pressure - 1 to 13.8 kg/cm2 along with Filed Device - DC Solienoid Coil with interface module in-built in one device mountable on Solenoid Valve to connect Controller Nos 1.00 18,394.07

and Valve on one wire path Make: Bermad/Netarim/RainBird/Toro

12.04 Providing, installing, testing and commissioning of Flow Sensor Make: Bermad/Netarim/RainBird/Toro Nos 1.00 98,538.98

12.05 Providing, installing, testing and commissioning of Rain Sensor Make: Bermad/Netarim/RainBird/Toro Nos 1.00 16,901.69

Providing, installing, testing and commissioning of Maxi Jackated Direct Burrial Irrigation Automation Cable 14 AWG Tin coated copper conductors, insulated with PVC

and having a high density polyethylene direct burial jacket. Conductor - Soft annealed tin coated solid copper conforming to ASTM B-33. Insulation: Polyvinyl Chloride

conforming to UL Standard 493 for TYPE UF/TWU rated 75°C. Outer Jacket: Pressure Extruded High Density PE conforming to ICEA S-61-402, and NEMA WC5 Jacket

Thickness 3/64" minimum jacket material to completely fill interstices between the two insulated conductors. Make: RainBird/Paige/Smartflows/Toro

Providing, installing, testing and commissioning of Pressure Regulatr to Maintain constant outlet pressure between 1.04 to 6.9 Kg/cm2 Make:

12.07 Bermad/Netarim/RainBird/Toro Nos 1.00 4,763.56

Providing, installing, testing and commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant ,fits wire from 22ga

12.08 to6 ga as per specifications complete. Make 3M/Smartflows/Rainbird Nos 1.00 195.76

12.09 Providing, installing, testing and commissioning of Surge Protector Make: Bermad/Netarim/RainBird/Toro Nos 1.00 8,539.83

12.10 Providing, installing, testing and commissioning of Copper Grounding Rod 5/8" x 8' Make: Paige/Smartflows/Rainbird Nos 1.00 6,405.93

12.11 Providing, installing, testing and commissioning of Maxi Surge Pipe Bermad/Netarim/RainBird/Toro Nos 1.00 31,135.59

12.12 Providing, installing, testing and commissioning of Maxi Grounding Plate Bermad/Netarim/RainBird/Toro/Paige Nos 1.00 38,251.69

12.13 Providing, installing, testing and commissioning of Voltage Stabilizer Make: APC/V Guard/Lumineous Nos 1.00 16,901.69

PLUMBING WORKS -RIVERSIDE,AHMEDABAD

Item No. Description Unit Rate Amount

Providing, installing, testing and commissioning of PLB Duct Pipe 32/26mm with pre inserted 3mm nylone rope for cable pulling, length Make:

12.14 Supreme/Smartflows/Reliance Mtr 1.00 107.63

13.00 Filteration Unit

Providing, installing, testing and commissioning of Filter Station Fully Automatic Self Cleaing Filter, Pressure Differential Based, 100/130 Micron, Flanged End & all required

13.01 Accessories Nos 1.00 3,95,340.68

Screen Filter Self Cleaning 50m3 / Hr Make : Rain Bird / Yardeney / Smartflows / VAF

Providing, installing, testing and commissioning of Filter Station Fully Automatic Self Cleaing Filter, Pressure Differential Based, 100/130 Micron, Flanged End & all required

13.02 Accessories Nos 1.00 1,99,011.02

Screen Filter Self Cleaning 25m3 / Hr Make : Rain Bird / Yardeney / Smartflows / VAF

14.00 Pump Station

Providing, installing and commissioning of Pumping System - Vurticle Multistage Pump having system flow of 37.8 m3/Hr @ 55 Mtr Head (2 Working + 1 SB), combination of

3 Pumps capacity of 18.9 m3/Hr @ 55m Head of each Pumps with All Header, Pressure Tank, Pressure switch, NRV and Butter Fly Valve with VFD Control Panel with all GI

C Class Pipes and Fittings (Jindal/TATA/Surya) etc. complete as directed by engineer in charge Make : Grundfos / ITT / Smartflows / Watertronics

Providing, installing and commissioning of Pumping System - Vurticle Multistage Pump having system flow of 18.0 m3/Hr @ 45 Mtr Head (1 Working + 1 SB) with All Header,

14.02 Pressure Tank, Pressure switch, NRV and Butter Fly Valve with VFD Control Panel with all GI C Class Pipes and Fittings (Jindal/TATA/Surya) etc. complete as directed by set 1.00 6,67,388.98

engineer in charge Make : Grundfos / ITT / Smartflows / Watertronics

14.03 Providing, installing and commissioning of Surge anticipation cum Quick Pressure relief Valve 2" Make : Bermad/Rainbird/ Cal-Valve Nos 1.00 1,74,586.44

14.04 Providing, installing and commissioning of DWC SN 8 Pipe 6" - Road Sleeve Make : Supreme/Duraline/Astral/Smartflows Mtr 1.00 998.31

PROJECT- RIVERSIDE SAVOURIES, AHMEDABAD

Schedule of rate for R & B

Item Description of Item Quantity Unit SOR Rate Amount (Rs. ) Total Amount

Item Description of Item Quantity Unit SOR Rate Amount (Rs. ) Total Amount

Electrical & ELV Work

1 Compact Substation

1.1 Unitized Sub-Stations 1.00 Each 28,35,072.00 28,35,072.00

Supplying, installation, testing and commissioning of 11 KV, 21 KA for 3 sec. non extensible unitized / Compact sub-

station consiting of following 11 KV SF6 insulated compact VCB, transformer & LT Air circuit Breaker in a pre -fabricated

dust and vermin proof out door enclosure having modular construction of galvanised sheet steel in corugated type wall

design dully painted with epoxy based powder paint (Colour RAL 7032) . The enclosure shall have IP54 degree of

protection for HT&LT switch gear compartment and IP23 degree of protection for transformer compartment. Short

Circuit breaking capacity of 21 KA at 11 KV 3 phase. Interconnection between HT switch gear and transformer using

suitable size aluminium conductor armoured XLPE cable, HV Danger Notice board, Internal earth connections copper

bus bars of 25mm X 6mm.

Supplying, Installation, Testing & Commissioning of HT VCB panel consisting of 1 no. of 630A HT VCB . The panel

should have tinned copper busbars and extensible type for future requirements. The Panel should be complete with

metering and protection as per specification.

Dry type 500 kVA, 11KV / 415 Volts , 3 phase, 50 Hz, Dyn11 vector group, copper wound, class "F" insulation

associated with winding temperature indicator / controller actuated by means of resistance temperature detector

embedded in LV windings , indoor type distribution Transformer with approximately 5 % impedance, tappings for off load

operation on HV side in steps of +/- 2.5 %, + 10 % & - 10 % having Suitable cu busbar connection between LV side &

LT ACB with neutral brought out separately including supplying and laying copper conductor multicore control cable

from transformer to HT breaker for safety tripping, suitably mounted on MS channel with all accessories and confirming

to IS 11171:1985 complete with all fittings and accessories as per specifications attached etc. as required at

site.Efficiency should be as per IS1180 Level -02.

B) LT Circuit Breker

800A FP, ACB, 36KA with busbar outgoing Suitable to connect 5#3.5x300Sq mm. Complete with OL,SC,EF Protection.

2.1 Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 1.00 Each 40,18,180.00 4018180.00

having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled

diesel engine with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10%

overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor,

heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold,

standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust,

element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer and

vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system,

capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine

and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both

connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprising of

voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not

more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with

obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below.

(V) Continuous rating of 500 KVA ,BHP not less than 600 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C.

diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for

generator contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility.

Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push

buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head

temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(G) AMF Control Panel for 500 KVA 3 phase DG Set

Supply, installation, testing and commissioning of 3 phase 415V 4 wire Free Standing Floor mounted MV panel made

out of minimum 14 SWG CRCA sheet after seventank process and painting with Epoxy powder coating including all

switchgear as detailed below. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate

detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The panel

shall consist of suitable rating FP/TPN Aluminium- busbar-as per SLD (at the rating of 0.8ASq.mm) supported with

DMC/ SMC barriers and colour coded with Heat shrinkable sleeves. The Metering shall be provided as specified.

The panel shall have Short circuit with standing capacity as given in SLD and consist of the switchgear as mentioned

below. The panel shall be mounted on plinth, stand, etc. including all materials. The panel shall be got fabricated from

manufacturers with CPRI Test certificate only. All the Panels shall have minimum 25% outgoing as per SLD. The earth

bus shall be continuoulsy run without any jointing/welding and its Size should be per SLD. The size of all Panel

Mounting Meters shall be 96X96mm.The Panels shall be mounted on U channels including supply and fixing of the

same. MCBs shall be provided for Control purposes. (All Panels shall be extendable type only). Price shall be inclusive

Shifting of panels from site store to the suitable location. Installation of panel as located in electrical drawings or as per

site conditions, including removing packing etc. Earthing all components, frame etc. to a common internal earth bar.

Connection, testing & commissioning. Electrical contractor shall carry out the insulation test at site & all the readings

shall be submitted in copy to the consultant or engineer-in-charge. Supply, installation, testing and commissioning all

accessories, supporting structure, hard ware etc to complete the job. Supply, installation, testing and commissioning of

necessary tools, hard ware, testing hard ware, testing equipment etc. The rates for the distribution boards apart from the

Breakers and instruments shall also include the following :

This schedule of Quantities shall be read in conjuction with the technical specification, General & Special conditions as

well as all tender drawings. Supporting rigid steel framework. Cubicle type, 14 gauge CRCA sheet steel enclosed.

Proper bonding to earth. Painting/lettering on Breakers and distribution boards, the location they serve, providing on

each panel its circuit diagram.

Providing cable clamps / supports within distribution boards cable alley.

All MCB’s shall be of minimum 10 KA breaking capacity.

The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic releases

upto 250 amps and miroprocesR&B R&B SOR based for 250 amps and above capacity, unless specified otherwise.

3.1 SITC OF Main LT Panel 1.00 Each 11,02,281.90 11,02,281.90

ALSO REFER SLD ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.

3.2 SITC OF Block Common Panel 6.00 Each 1,08,037.90 6,48,227.40

ALSO REFER SLD ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.

3.3 SITC OF External Lighting Panel 4.00 Each 1,10,222.04 4,40,888.15

ALSO REFER SLD ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.

3.4 SITC OF PHE Panel 1.00 Each 99,916.60 99,916.60

ALSO REFER SLD ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.

3.5 SITC OF APFC PANEL - 200 KVAR 1.00 Each 5,74,578.00 5,74,578.00

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel

fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following

Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection

Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection,Copper

tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-

phase 550Volt Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and Overload

protection,Each step Capacitor having suitable MCB with Sc, OL, internal earth fault relay,Each stage having Stage

Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor

mounting, Cable entry as per site situation,Cooling fans for panel

ALSO REFER SLD ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.

4 JUNCTION BOXES

4.1 Supply, Transportation, Installation, testing and commissioning of IP-67 Rated weather proof Outdoor type junction 5.00 Each 904.42 4,522.09

boxes having dimensdios Height x Width x Depth:- 104 x 104 x 70 mm with terminal having black colour RAL 7035. with

5 pole terminal set upto 4 sqmm cables

4.2 Supply, Transportation, Installation, testing and commissioning of IP 66/69 weather proof Outdoor type junction 10.00 Each 4,072.96 40,729.55

boxeshaving dimensdios Height x Width x Depth:- 155 x 210 x 92 mm with terminal having black colour RAL 9011. with

5 pole terminal set upto 16 sqmm cables

5 DISTRIBUTION BOARD

SPN Distribution Board :

5.1 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 44.00 Each 1,141.00 50,204.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

5.2 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 8.00 Each 1,478.00 11,824.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

5.3 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 1.00 Each 1,664.00 1,664.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) Single phase incoming and horizontal single phase outgoing

(b) Sheet Steel double door (IP-43)

TPN Distribution Board :

5.4 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 7.00 Each 2,885.00 20,195.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for suitable for (PPI DB)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) Sheet Steel double door

5.5 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 17.00 Each 3,379.00 57,443.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for suitable for (PPI DB)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) Sheet Steel double door

5.6 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 1.00 Each 3,836.00 3,836.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for suitable for (PPI DB)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) Sheet Steel double door

5.7 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, 1.00 Each 4,620.00 4,620.00

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used) suitable for suitable for (PPI DB)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) Sheet Steel double door

VTPN Distribution Board :

5.8 Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted 1.00 Each 5,760.00 5,760.00

double door (IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-

1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB to be used)

(A)4 way outgoing

5.9 Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted 1.00 Each 8,319.00 8,319.00

double door (IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-

1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB to be used)

(C)8 way outgoing

5.10 Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted 1.00 Each 10,857.00 10,857.00

double door (IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-

1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB to be used)

(D)12 way outgoing

MCB 's and its Accessories

5.11 Providing & erecting insulated socket 3P+N+E with Plug16A rating which is comprised of Four pole MCB slot and 1.00 Each 1,690.00 1,690.00

insulated socket IP40 Cat-III.

5.12 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and 614.00 Each 111.00 68,154.00

having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III.

5.13 Providing & erecting 240 V MCB double pole switch for motor & inductive load having 10 KA breaking capacity & 1.00 Each 297.00 297.00

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

5.14 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 7.00 Each 590.00 4,130.00

IS :8828 in existing box having following capacity

(a) 6 to 32 Amp. ( Cat.III)

5.15 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 17.00 Each 662.00 11,254.00

IS :8828 in existing box having following capacity

(b) 40 Amp. ( Cat.III)

5.16 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 87.00 Each 730.00 63,510.00

IS :8828 in existing box having following capacity

(c) 63 Amp. (cat III)

5.17 Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 4.00 Each 582.00 2,328.00

IS :8828 in existing box having following capacity

(a) 6 to 32 Amp. (Cat.III)

5.18 Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 4.00 Each 641.00 2,564.00

IS :8828 in existing box having following capacity

(b)40 Amp.(Cat.III)

5.19 Providing & erecting 415 V MCB three Pole for Motor & Inductive Load having 10KA breaking capacity & confirms to 1.00 Each 709.00 709.00

IS :8828 in existing box having following capacity

(C)63 Amp. (Cat.III)

5.20 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short 89.00 Each 1,950.00 1,73,550.00

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating

erected as directed

(i) 25 Amps.DP ( Cat. III)

5.21 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short 7.00 Each 2,213.00 15,491.00

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP ( Cat. III)

5.22 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short 1.00 Each 2,628.00 2,628.00

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating

erected as directed

(iii) 63Amps. DP ( Cat. III)

5.23 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device 14.00 Each 1,798.00 25,172.00

having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including

all materials lugs screws etc. completed.

[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase

5.24 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device 1.00 Each 1,925.00 1,925.00

having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including

all materials lugs screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase

5.25 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device 14.00 Each 2,145.00 30,030.00

having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including

all materials lugs screws etc. completed.

[e] 32A to 40 A, 4 Pole Three Phase

5.26 Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device 1.00 Each 2,806.00 2,806.00

having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS

12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including

all materials lugs screws etc. completed.