Construction of Aadarsh Nivashi Shala (Kumar) at Rajpipla, Ta:- Rajpipla, Dist. Narmada

Name of Work : Construction of Aadarsh Nivashi Shala (Kumar) at Rajpipla, Ta:-Rajpipla, Dist

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

Quantity Unit Rate Amount

No. specifications)

1 Excavation for foundation up to 1.50 MT depth including sorting out

and stacking of useful materials and disposing the excavated stuff up to 5177.00 Cu.M 139.47

50 mt lead (A) Loose & soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (B) Dense or Hard soil 3787.00 Cu.M 174.56

3 Filling available excavated Earth (Excluding Rock ) in trench plinth side

of foundation etc. in layer not excluding 20 cm in depth consolidation

each deposited layer by ramming and watering etc. complete 4318.00 Cu.M 137.47

4 Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc. 2617.00 Cu.M 308.62

5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand :

B.T. stone aggregates 40 mm. nominal size) and curing complete 490.00 Cu.M 2825.98

excluding cost of from work in :(a) Foundation and plinth

6 Providing and laying controlled cement concrete M150 for curing

complete including cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations, 710.00 Cu.M 3782.34

footings,Base of columns,Plinth Slab and Mass concrete.

7 Providing and laying controlled cement concrete M250 for curing

complete including cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations, 1068.00 Cu.M 4460.16

footings,Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts 154.00 Cu.M 7839.64

and struts Column Up to Plinth Level

9 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts 441.00 Cu.M 7818.95

and struts up to floor two level for Columns For All Floors.

10 Providing and laying controlled cement concrete M200 and curing

complete including the cost of form work but excluding the cost of 277.00 Cu.M 5822.65

reinforcement for reinforced concrete work For Plinth Beams

11 Providing and laying controlled cement concrete M200 and curing

complete including the cost of form work but excluding the cost of 781.00 Cu.M 6215.20

reinforcement for reinforced concrete work in BEAMS For All Floor.

12 Providing and laying controlled cement concrete M200 and curing

complete including the cost of form work but excluding the cost of 751.00 Cum 6507.06

reinforcement for reinforced concrete work for Slab All floors

13 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work For Lintels & Sill Level in All 204.00 Cu.M 7466.69

14 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of 63.00 Cu.M 6328.73

reinforcement for reinforced concrete work For Chajja in All Floors

15 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in STAIR CASES for All floor 91.00 Cum 8399.79

16 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including

bending binding and placing in position complete for All Floor

17 Proving & Fixing Chicken mesh for joint between brick work & RCC

work fixing with nail & GI washer as per director in Charge 747.00 Sq.M 74.84

18 Brick Work using Common Burnt Clay Building Bricks having crushing

strength not less than 35 Kg/sm. in super structure Above plinth level up

to floor two level in cement mortar (1:6) ( 1 cement : 6 fine sand) 1523.00 Cu.M 4616.63

(Conventional) For All Floors

19 Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in super structure above plinth up to floor two 1141.00 Sq.M 698.88

level Conventional Bricks for All Floors.

20 Providing throating or plaster drip and moulding to R.C.C. chhajja by

making 5mm to 15 mm wide groove as per design etc. complete 385.00 Rmt 44.07

21 Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (ii) Cement mortar 1:4 (1- 12500.00 Sq.M 193.59

cement :4-sand)

22 Providing 10mm thick cement plaster (mala troweled finish) in single

coat on Celling,& Soffits of Stair, concrete wall for interior plastering

finished even and smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) 9679.00 Sq.M 198.02

23 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as

suggested by this office consisting of 12 mm thick backing coat of C.M.

1:3 ( 1 cement : 3 coarse sand ) and 8 mm thick finishing coat of C.M. 6952.00 Sq.M 359.33

1:1 ( 1 cement : 1 coarse sand) for all heights as directed etc. complete.

24 Providing Water proofing Treatment on Sunk Slab including cement

concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement average 50mm thick to Prepare slope 790.00 Sq.M 373.70

including water proofing chemical etc. Complete for Sunk Slab All Floor.

25 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

Length for Sunk Slab or as directed by Engineer in Charge etc complete.

26 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty)

& two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered

27 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings 7990.00 Sq.M 84.82

and other foreign matter and sand papered smooth.

28 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on ceiling and soffits of slab surface to give an even

shade including throughly brushing the surface free from mortar 6110.00 Sq.M 90.48

droppings and other foreign matter and sand papered smooth.

29 Wall painting two coats with weather proof acralic emulsion APEX type

paint of approved brand & manufacture and of required shade on

exterior wall surface to give an even shade over and including a

primery coat with alkaly resistance primer of approved brand after 6840.00 Sq.M 122.14

throughly brushing surface to remove all dirt and remains of loose

powdered materials etc comp. for all height.

30 Providing and fixing 60 x 60 CM Machine cut, free edges, mirror

polished Blue Kotah stone slab flooring 25 mm thick laid on 20 mm thick

cement mortar 1:6 ( 1 cement:6 coarse sand) jointed with matching 2776.00 Sq.M 1182.84

pigment & cement slurry including rubbing and polishing finishing etc.

31 Providing and fixing 60 x 60 CM Machine cut, free edges Blue Kotah

stone slab flooring 25 mm thick laid on 10 mm thick cement mortar 1:3

( 1 cement:3 coarse sand) for Skirting & Riser including jointed with 154.00 Sq.M 1205.60

matching pigment & cement slurry including rubbing and polishing

finishing etc. complete.

32 Providing and laying Machine Cut free edges, Machine polished Granite

Stone slab 18 mm thick single peace For Stair,Steps,landing as per

design incl. full moulded round front edge and 1cm nosing and

necessary groove on trade of steps laid on 20 mm thick cement mortar 258.00 Sq.M 2774.47

1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry

including rubbing,polishing & Finishing etc. complete

33 Providing and fixing machine cut, free edges, pre mirror polished Green

marble stone slab 18 mm thick (single piece not less than 150 cm ) for

vertical wall/Doors/Windows Sill,Jams for cladding as per design

including full moulded round inside edge and laid on 10 mm thick 504.00 Sq.M 1730.13

cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey cement

slurry including rubbing and polishing finishing etc. complete.

34 Providing and fixing Machine cut Double polished kota stone in single

piece (Max 150 cm long and width upto 45 cm with both side polished)

for horizontal Shelves including making grooves & Fixing the Same 27.00 Sq.M 451.47

finished with flush pointing, round open edge etc complete

35 Providing and fixing Machine cut & Polished kota stone in 7.5 CM width

Strip flooring for Ramp even grade over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab 13.00 Sq.M 1154.43

including rubbing and polishing etc. complete. (A) 25mm thick

36 Providing and laying coloured matt finished Anti skid ceramic tiles of

the size 300 mm x 300 mm in skirting, risers of steps and landing laid on

a bed of 12 mm thick cement mortar 1:3(1-cement:3-coarse 263.00 Sq.M 1017.30

sand)finishing with flush pointing in white cement etc. complete.

Colour and Shade approved by Engineer-In-Charge

37 P & L Colour glazed vetrified tiles size 30 x 45 cm 6 mm thick in skirting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement slurry

38 Providing and laying water proofing treatment with china mosaic tiles

flooring over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for

plain and curve surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more colour as directed )

to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

contain water proofing materials per bag of cement useas specified by 2258.00 Sq.M 1164.53

manufactured and slops to be tempered to bring mortar up to surface

with using white cement and colour pigment including rounding of

junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using

oxalic acid etc. complete.

39 Constructing Sandwich Platform of 18 mm thick Polished Black or

selected Granite at top and 25 mm thick Kota stone slab With 75CM

height with necessary Support using 20mm thick cement mortar 1:3 for

sandwich and fitting at bottom & edges with waterproof rigid

adhesives including making necessary grooves in walls with Vertical

support of double Kota stone sandwich every 60 cm centre to centre 52.00 Sq.M 3320.76

including all labour material of approved quality including full

moulded round front edge fixed in wall for partition and jointed

with grey cement slurry including rubbing and polishing etc. complete

40 Providing and Fixing of Double Shutter Door frame 100 X 38 M.S. squre

box section & 25 X 25 M.S. Square box section of horizontal middle 15.00 Sq.M 10487.84

41 Providing and fixing Double Shutter FRP frame size 100x50 mm and

35mm thick FRP depress panel shutter having extra reinforcement on

sides & edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking 20.00 Sq.M 2781.54

hinges & fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

42 Providing and fixing 38mm Thick door Single shutter solid core finished

having factory fabricated std. Extruded aluminium colour anodized

hollow section Jindal 19552 weight not less than 1.1 kG/MT {Section

63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion of

door frame shall be filled with wood to be insert for durable grip of

door hinges, with factory made 38 mm.thick flush door both side 1 mm 115.00 Sq.M 3535.00

thick pre laminated with 6 Lever Mortice lock {Godrej or Equivalent), SS

Aldrop 30cm long, SS Handle size 30 Cm Long, Tower Bolt size 20 cm &

Floor spring heavy duty etc. as per detail colour & pattern apporoved by

this office including necessary anodized alluminum fixtures and

43 Providing and fixing FRP Single shutter Door frame size 100 x 50mm

and 35 mm thick FRP Depress panels Single/Double shutter having extra

reinforcement on sides and edges in gel coat finish the core of shutter

and frame is to be filled up with injected fire retardant grade

polyurethane foam done in situ along with embedded wooden pieces

for stiffening and also taking hinges and fixtures the whole FRP Frame 75.00 Sq.M 2754.62

and shutter is to be water proof, whether proof, termite proof and

resistance to mild acid / alkali Rates are to be inclusive of SS hinges with

necessary screw and aluminium fixtures and fastening and fastener

sleeve and directed by engineer in change with detailed drawing.

44 Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 95mm x 24.10mm x 1.17mm (of

Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Two track

member size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8688,@

Wt.1.06 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm

(of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, 219.00 Sq.M 1658.39

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window

45 Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24.10mm x 1.17mm (of

Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm

(of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details

46 Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 3 mm thick Bajari glass as details 51.00 Sq.M 1089.97

etc complete for Ventilation

47 Providing and fixing urinal of approved quality including connecting

urinal with waste pipe ,tap etc. complete (A) white earthen ware flat

back type size 430 mm x 260 mm x 350 mm including 32mm dia C.P. 20.00 No 1142.77

brass waste Coupling with PVC Waste pipe and PTMT Spreader with

15mm dia flexible pipe.

48 Providing and fixing kitchen platform trolley having three drawers of SS

(IS 304) of required size like partition type in kitchen platform having

drawer front side and backside by using 19mm thick all proof plywood

of ISI quality all side laminated etc. as directed. The size of SS (IS 304) 59.00 Sqmt. 12645.20

basket of size 4" to 18" for tperforated, partition type as directed

including necessary S.S. fittings, handles, nobs, telescopic channels, etc.

49 Providing and fixing 90 cm high Stainless Steel railing made from

anticorrosive 304 grade S.S. pipe of 50 mm dia (16 gauge) as hand rail

with S.S. 304 grade baluster of 32 mm dia (16 gauge) as a vertical

support fixed in RCC slab / steps of stair at 1.2 Mt. c/c including three

horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal distance fixed by 210.00 Rmt 2377.54

16 mm dia (16 Gauge) S.S. pipe with baluster including accessories as

per detailed drawing as directed etc. complete.

50 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing

sheet fixed with hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by Engineer in charge. 220.00 Sq.M 1441.90

51 Providing erecting and fixing double coated Syntex PVC. (ISI) water

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace.

52 Providing, laying and jointing in true line and level 110 diameter U.P.V.C

SWR (Type B) Pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 700.00 Rmt 897.79

mm height at every 2000 mm centre to centre or shall be concealed in

walls as directed including necessary fittings such as bends, "Y" "T"

shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

53 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B

Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fitting conforming to IS 14735-1999 of

approved make for drainage system pipeline, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using PVC

Clamp of the size 160mm dia x 210 mm length x 196 mm high at every 945.00 Rmt 834.38

2000 mm centre to centre or shall be concealed in walls as directed

including necessary fittings such as bends, shoes, tees, etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials

54 Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 1340.00 Rmt 200.44

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

55 Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 1520.00 Rmt. 148.12

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 40mm dia

56 Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary 1815.00 Rmt. 91.84

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 25mm dia

57 Providing and fixing concealed centre point to wall ceiling & floor CPVC

(SDR 13.5) Pipe having National Sanitation Foundation (NSF) seal for

potable water of following dia. Nominal bore tube fitting and clamps 460.00 Rmt. 253.82

including making good the wall, ceiling, and floor, etc. complete 25 mm

58 Providing and fixing concealed centre point to wall ceiling & floor CPVC

(SDR 13.5) Pipe having National Sanitation Foundation (NSF) seal for

potable water of following dia. Nominal bore tube fitting and clamps 506.00 Rmt. 170.36

including making good the wall, ceiling, and floor, etc. complete 15 mm

59 Providing and fixing Gun metal check or non-return full way wheel

valve.(D) 50mm dia.

60 Providing and fixing Gun metal check or non-return full way wheel

valve.(E) 40mm dia. 112.00 No 663.43

61 Providing and fixing Gun metal check or non-return full way wheel

valve.(C) 25mm dia. 145.00 No 420.63

62 Providing and fixing ball cock of approved. quality as directed.(A)

Copper Metal (ii) 50mm dia. 13.00 No 189.84

63 Providing and fixing wash down water closet (European W.C. Pan) with

integral P or S trap and PVC dual flush tank with complete fittings

including cutting holes in walls and making good the same connecting

the flush bend with cistern and closet etc. complete including plastic 26.00 No 3227.96

seat cover, water jet and including jointing trap with Waste pipe overall

size as per the selection of the Model by E.I.C. or as approved}

64 Providing and fixing Water Closet Squatting Pan (Indian Type W.C. Pan)

size 580mm Integral Foot Rest Type (A) Vitreous China.(I) Long pattern =

White colour including 100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and soil pipe in

cement Mortar 1:1 (1-Cement : 1-Fine sand) with 25mm dia. Chromium 27.00 No 1678.67

plated brass half trun flush cock of approved quality including fixing in

pipe line G.I. inlet connection for flushing W.C. Pan etc. complete.

65 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x

400mm size. (i) In white colour. including with approved sanitary grade

material with C.P waste coupling, waste pipe, 15mm dia Pillar & Stop 43.00 No 2147.26

Cock of approved brand with connection 15mm dia flexiable pvc pipe

66 Providing, laying and filling 50mm thick expansion joint by hydro cell

semi rigid UV resistance with high performance laminated closed cell

polyyhene foam joint filler in sheet foam as directed etc.complete. 789.00 Sq.Mt 1491.03

67 Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia. 214.00 No 186.83

68 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as

approved by Engineer In Charge. 40.00 No 205.83

69 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of 94.00 No 600.23

cutting and making good the walls.

70 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr

long plc. heavy duty supply pipe with two side male female checknut 25.00 No 308.99

71 Providing and fixing S.W. Gully trap with C I grating brick masonry

chamber and water tight C I cover with frame of 300 x 300 mm size

(inside) with standard weight (i)square mouth traps (C) 150 mm x 100 111.00 No 1246.92

mm size P or R type

72 Providing and fixing C.P. brass towel rail complete with C.P. Brass

brackets fixed to wooden plugs with C.P. Brass screws, (B) 600mm x 20 29.00 No 616.42

73 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of

superior glass mounted on 6mm the A.C. sheet or plywood sheet & 35.00 No 859.41

fixed to wooden plugs with C.P. brass screws and washers.

74 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia

75 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia.

76 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working

pressure polyethylene pipes of the following outside dia. Low density,

complete with special flange compression type fittings wall clamps etc. 2395.00 Rmt. 339.05

including making good the wall, ceiling and floor. (G)110 mm

77 Constructing brick masonry chamber for under ground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X

mm. Internal dimensions, Total weight of cover with frame to be not

less than 38 Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C.

top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone 135.00 No 3660.76

aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & abed concrete etc. complete.(ii) Inside

dimensions, 500 mm. x 700 mm. and 450 mm. Deep for pipe line with

one or two inlets.

78 Applying general insecticide pest control treatment to floors, cupboards

etc. including labour material etc. complete. Using Imidacloprid 30.5 SC

As Per IS 6313 part-III (0.075% Concentration by mass) is recommended

10.5 ml chemical dilute with 5 litters of water application 0.5 Litre 2331.00 Sq.M 43.97

chemical / Sq.M of surface is recommended as per I.S

79 Providing and laying (Two level or slopes) and jointing with stiff mixture

or cement mortar in proportion 1:1, salt glazed stone ware pipes

including testing of pipes and joints etc. complete and Providing and

laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded

stone aggregate 40mm nominal size) bedding for stoneware pipes 1770.00 Rmt 556.99

(166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 150mm dia.

80 Providing and laying (Two level or slopes) and jointing with stiff mixture

or cement mortar in proportion 1:1, salt glazed stone ware pipes

including testing of pipes and joints etc. complete and Providing and

laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded

stone aggregate 40mm nominal size) bedding for stoneware pipes 1080.00 Rmt 352.74

(166mm Ave. bed thickness) of following internal diameters with

necessary formwork and curing complete.(B) 110mm dia.

81 Providing and laying (to level or slope) and jointing reinforced concrete

not pressure pipes IS class NP 2 of the following internal diameter with

collars and nut ends prepared for collar joints including testing of joints 3460.00 Rmt 678.03

complete 300 mm dia

82 Providing and laying in trenches jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In

Charge, including necessary fittings etc. including testing of pipe and 860.00 Rmt 195.67

joints and fixing the same with adhesive solvent, including cost of

excavation & refilling the same with all materials.

83 Providing and fixing Safety Grills of required pattern for windows/door

using 16mm x 16 mm square M.S. polished bars, Required at required

spacing as per design and hold fast with coach bolts including one coat 12181.00 Kg. 116.91

of primer and two coats of matt finished oil painting etc. complete.

84 Providing plinth protection to building including excavation in ordinary

soil and laying cement concrete 1:4:8 using stone aggregates of 40mm

nominal size in foundation layer 0.10 mt. thick below pre-cast Rubber

Dye inter locking concrete block 60mm thick with grade of concrete

M200 pneumatic compressed by mechanically pressed and as per

approved design including 75mm Sand layer for levelling and filling the

joint with sand in proper line and level etc. complete, Including 547.00 Sq.M 1313.00

Providing and fixing pre-cast concrete kerb stone of grey cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concrete as per approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3 (1cement:3fine sand)

85 Providing and fixing in position 300 mm high, 150 mm wide

English/Gujarati letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer-in-charge with all necessary tools & plants etc. 200.00 No 707.00

86 Providing and fixing in position 150 mm high, English/ Gujarati letters

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-

charge with all necessary tools & plants etc. complete. 200.00 No 404.00

87 Providing and fixing steel cupboard having frame of 40 mm x 40 mm x

mm M.S. angle double door shutter of CRC plate of 18 gauge (1.219 mm

thickness) with 30 mm x 3 mm x 3mm angle framing at top and bottom

edge of shutter 10 mm x 10 mm square M.S. bars 2 Nos. vertical and

mm x 3 mm M.S. flat at one edge of each shutter and for lock along with

one coat of red oxide and two coats of spray oil painting of approved 50.00 Sq.Mt 3291.59

brand and colour shed and locking arrangement including 20 mm thick

both side polished granite stone fixed in walls (5 Nos. of shelves )with

making grooves and having front edge with full moulding etc. complete

as directed by Engineer-in-charge.

88 Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead

paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M. 56.00 Quintal 9448.07

ovarall height.

89 Providing and fixing louvers:114mm wide G.I. sheet having thickness of

0.55mm & weight not less than 490 gm/meter, roll for medtocreate

84mm wide louvers and fixed on special shaped G.I. Channel. Fix louvers

&Channels shall finished with powder coating of 55 micron as per 10.00 Sq.Mt 3045.15

detailed drawing and as directed by Engineer incharge etc. complete.

90 Providing and fixing of conspectus tape 50mm width on of treads in

staircase including cutting pasting etc . As per harmonised guidelines

complete in all respect to the entire satisfaction of engineer in charge. 20.00 Rmt 1567.52

91 Providing and Fixing Size : L 75mm x W 75mm xl 1200 : 15 mnthick U

shape corner Rubber Reflective Guards with yellow |relective Patti

fixing on RCC/brick surface Including all ftting and materlal charges & it

shall be Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof, 40.00 No 685.29

High Flexural Strength, Hiehlv Durablc, Stain Resistance as per detailed

drawing etc . complete as directed by Architect or Engineer in charge.

92 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactibe Warning

Tiles (Attention Tilesi .e. Tactile Warning Surface |Indicator (TWSI)}) of

Johnsan Endura Tac Button Yellow Plus or equvglent make in flooring

laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointod with cement slurry including finished with flush

pointing & cleaning the surface for all loors as per detailed dravwing ctc.

complete as directed by Architect or Engincer in charge.Thse tiles shall 30.00 Sq.Mt 1207.96

be Anti Skid, Chemical Resistant, Fade Proof, Frost - lleat & Weather

Proof, High Flexural Strength, Highly Durable, Stain Resistance . All

Tactile Warning Tiles meet the specific size and dimension standards as

required by IS0/FDIS

93 Providing and Fixing a set of wall mounted 38 mm dia U shaned

borzontal stalnless stecl collapsible grab bar 38mm vertical Rate

Analysis 53 stainless steel fixed grab rail of grade SS 304 rom round plne

supDorted and 75 mm dla 8 mm thick SS 304 base flange on wall 6.00 Set. 2671.45

including anchor fasteners, nuts, accessories as per detalled drawing cte

, complete as dlrected by Architect or Engineer in charge.

94 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling 1599.00 Sqmt. 705.95

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

95 Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Vertical Walls for All 62.04 Cum 8850.43

96 Wall painting (three coats) of plastic paint with one wall highlight in

special effect (royal play) colour, shade and colour of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings 4510.00 Sq.M 128.38

and other foreign matter and sand papered smooth.

97 Wall painting (three coats) with plastic emulsion paint of approved

brand and manufacture on ceiling and soffits of slab surface to give an

even shade including throughly brushing the surface free from mortar 3410.00 Sq.M 90.48

droppings and other foreign matter and sand papered smooth.

98 Providing and laying 60 x 60 Cm Soluble Salt vitrified 10 mm thick Tiles

in flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with 692.00 Sq.M 1663.47

color cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

99 Providing and laying Soluble Salt vitrified 10 mm thick tile Tiles in

skirting, risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and pointing in white cement with white 115.00 Sq.M 830.22

100 P & L Colour glazed Ceramic tiles size 60 x 30 cm 6 mm thick in skirting

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour cement slurry

101 Providing and fixing Single shutter 35mm Thick door solid core wooden

flush shutter conferming to IS:2202 & ISI approved manufacture,

covered with 1 mm thick laminates on each side of shutter, 6 mm thick

polished teak wood beading on periphaery, 150 mm-200 mm S.S. 222.00 Sq.M 5955.97

Handles and S.S. Fixtures & Locking Arrangement on Each shutter, fixed

with 4 Nos. 150 mm High S.S. hinges Complete as directed by Engineer

102 Providing and fixing jindal E (30 mm) series Three track alluminimum

window (2 shutter + 1 Mosquito net shutter) standard extureded colour

anodized section with frame having frame bottom member jindal

section no:20928 @ wt. of 2.032 kg/Rmt, frame side and top member

jindal section no.:20837 @ wt. of 1.197 Kg/Rmt with sliding shutters of

single glass shutter top bottom member Jindal section no.20993 @

wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ wt. of 47.00 Sq.M 4079.65

0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

0.809 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter

including fitting, fixtures, rubber gasket and transperent silicon seleant

as per drawing and instruction of engineer in charge etc. completed for

Window Three Track

103 Providing and fixing in position standared extruded approved colour

anodised aluminum vantilation with outer frame of (Jindal section No.

21458 @ wt 0.658 kg/ Rmt ) with 5 mm thick bajari figure adgesteble

tinted louvers glass fixed to alluminimum strip blade including fixtures, 21.00 Sq.M 1961.42

fastening, labours and equipments as per detailed drawing as directed.

For ventilation

104 Providing and fixing kitchen sink painted white with C.I. or M.S. brackets

M.I. Fiber union 32 mm dia. C.P. brass waste 32 mm dia. 15 mm stop

cock etc. completed, including cutting holes in walls and making good 15.00 Nos. 3149.18

the same but excluding fittings, (C ) Vitreous China Sink (i) 600 mm X

450 mm X 150 mm Size

105 Providing and fixing Kotastone shelves (size 150 x 300mm) as approved

by Engineer In Charge. 7.00 Sq.mt. 220.25

106 Providing and fixing Granite shelves (size 150 x 300mm) as approved by

Engineer In Charge. 5.00 Sq.mt. 3667.63

107 Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters, 98.00 Quintal 7630.38

purlins conneted to common rafters and the like.

108 Providing and fixing jindal E (30 mm) series Three track alluminimum

window (3 shutter + 1 Mosquito net shutter) standard extureded colour

anodized section with frame having frame bottom member jindal

section no:20998 @ wt. of 3.197 kg/Rmt, frame side and top member

jindal section no.:20837 @ wt. of 1.694 Kg/Rmt with sliding shutters of

single glass shutter top bottom member Jindal section no.20993 @

wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ wt. of 50.00 Sq.M 8115.35

0.994 Kg/Rmt & inter lock member jindal section no. 20549 @ wt. of

0.731 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter

including fitting, fixtures, rubber gasket and transperent silicon seleant

as per drawing and instruction of engineer in charge etc. completed for

Window Three Track

109 Providing and fixing post and pipe railing as per detailed drawing

including 3 coats of painting to steel works complete. 20.00 Quintal 1210.38

110 Filling in plinth with sand under floors including watering ramming,

consolidating and dressing etc. complete. 30.00 Cu.M 489.28

111 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc. 600.00 Rmt. 515.27

including making good the wall ceiling and floor.(G)160 mm

112 Providing junction for rain water juncton chamber of size

0.60x0.60x0.75m with excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement plaster inside & outside 80.00 Nos. 7087.17

& 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS steel and

0.60mx0.45m cast iron manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

113 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m

x1.20m & excavation dimension of 2.82mx 1.96x1.35m including C.C

1:2:4 bed concrete of 0.15m thick including brick work in c.m 1:6 for

23cm thick wall including 15mm thick cement plaster inside & outside

with cement slurry & 10cm thick RCC 1:2:4 top cover with frame of 20.00 Nos. 14799.53

minimum weight of 35 kg & filling filter material kapchi in layers (25-

40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

114 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging

with excavation filling the pit with gravel & sand in layers including

making 300mm dia bore depth of 4.5mt & above concrete with kapchi 8.00 Nos. 9516.22

in layers (25-40mm & 10-20mm) & BT metal 40mm & filling brick as

directed by Engineer-in-charge.

115 Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring 117.00 Cum 280.94

116 Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq.Cm. in foundation and plinth in Cement 340.00 Cum 4279.98

Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional.

117 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 10.00 No 2932.93

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

118 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 5.00 No 7180.44

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm deep for pipe lines with

three or more inlets.

119 Providing and laying (two level or slopes) and jointing with stiff mixture

of Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of

pipes 150mm laying lime concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-

Graded brick aggregates 40mm nominal size) bedding for stoneware 450.00 Rmt 803.14

pipes of following internal diameters with necessary formwork and

curing complete.

120 Providing cement vata (10cm x 10cm size) quarter round in cement

mortar 1:1 including neat cement finishing watering etc. Complete 86.00 Rmt 24.28

121 Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 358.00 Sqm 370.67

Cement : 2 Coarse sand) finished with trovel including scaffolding curing

etc. complete. For Ground floor

122 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having

weight not less than 35Kg. 3.00 Nos. 958.17

123 Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having

[H]For 15 H.P,3 phase open well horizontal mono block pump set 6.00 Nos 36107.50

suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR head suitable for

65/80 mm dia delivery pipe

124 Distempeing (Two coats) with oil bound distemper of approved brand

and manufacture and Washable of required shade on wall surfaces to

give an even shade, over and including a priming coat with distemper

primer of approved brand and manufacture after thoroughly brushing 343.00 Sqmt 77.30

the surface free from mortar dropping and other foreign matter and

also including preparing the surface even and sand papered smooth.

125 Distempeing (Two coats) with oil bound distemper of approved brand

and manufacture and Washable of required shade on Celling and

sloping roof to give an even shade, over and including a priming coat

with distemper primer of approved brand and manufacture after 150.00 Sqmt 85.85

thoroughly brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface even and sand

papered smooth.

126 Providing and fixing rolling shutters of approved make made of 80 mm

wide M.S laths inter-locked together through heir entire length and

jointed together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates,guide channels and 26.00 Sqmt 3784.54

arrangement for inside and outside locking with push-pull operation

including the cost of hood cover and sprig etc.complete(A) Shutters

having width Above 3.5M

127 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose

collapsible / boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC

/ ERW casing pipe above 12 meters and up to 40 meters depth by DTH 1200.00 Rmt 414.10

rig etc.complete

128 Supplying slotted PVC pipes of approved quality at site of work

confirming to IS. 1239/1974 180mm dia. 280.00 Rmt 555.50

129 Supplying PVC plain pipes of approved quality at site of work

confirming to IS. 1239/1974 180mm dia. 10 Kg/cm2 280.00 Rmt. 1172.61

130 Providing and jointing flat flexible coppered calble PVC insulated

enamelled aproved make three core 2.50mm. 400.00 Rmt. 117.16

131 Supplying submersible pump set suitable for bore of 150 mm dia or

more having 3 phase motor capacity not less than 10 HP with [A]

stage 575 to 480 LPM discharge at 60 to 70 mtr head for 65 mm dia

delivery pipe Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos.of 32A. rating contactors and. 1 8.00 Nos. 54277.40

No. of directly operated thermal overload relay having 20-32A range in

sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 35 H.P.

(A)P.W.Blockwith necessary connection complete erected onas

directed. Cat-II

132 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium

grade) of the 50mm nominal bore, tube, fittings and clamps include. 300.00 Rmt 513.08

Making good the wall ceiling and floor.(F) 50mm dia.

133 Providing and fixing to concealed wall ceiling and floor galvanized mild

floor tubes (medium grade) of the 50mm nominal bore, tube, fittings

and clamps incldg. Making good the wall ceiling and floor (F) 40mm dia.. 200.00 Rmt 608.35

134 Providing and fixing to concealed wall ceiling and floor galvanized mild

floor tubes (medium grade) of the 25mm nominal bore, tube, fittings

and clamps incldg. Making good the wall ceiling and floor.(C) 25mm dia. 140.00 Rmt 401.95

135 Earthwork in cutting including preparing the slope and camber

andstacking or utilising the cutting stuff in bank as directed upto

Meters from the end of cutting with all lead and lift.(i) Hard murrum.+

Add extra over item 9 for conveying and utilising the stuff in bank from 253.00 Cum 450.77

end of cutting with all required lead and lift.(C) Above 400 Meters upto

136 Box cutting the road surface to proper slope and camber for making a

base for road work including removing the excavated stuff with 945.00 Cum 112.02

desposing on the road side slope as directed up to 50 mt. Lead

137 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including

conveyence + Spreading the stone aggregate for rolling and W.B.M.

including filling the interstices to required camber and gradient 284.00 Cum 1153.62

(excluding spreading of Blindage)(iii) 25mm to 50mm size crushed stone

138 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3

coarse sand : 6 aggregate 20mm nominal size ) graded concrete and

curing complete

139 Providing and and laying controlled cement concrete M250 and curing

etc. comp. including the cost of form work and reinforcement for R.C.C. 378.00 Cum 4185.96

work for internal road.

140 Compaction and finishing of cement concrete road by tremix process,

providing extra labour charge for tremix ( Vaccum dewatering service )

process on cement concrete road surface by using vaccum dewatering

pump floater surface vibrator including making groove 5mm width and 2040.00 Sqm. 81.81

filling with polyvynile polymer and rough finish to surface as per

instruction including leveling etc. complete.

141 Supplying and fixing reinforced concrete heavy duty non-pressure pipes

with collars for culverts including setting and joining the pipes in C.M.

1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 150.00 Rmt 1095.18

casted by vertically vibrated technology of following internal diameter.

(i) 300 mm dia.

142 Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

143 Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (C)

By mechanical means in area of light jungle

144 Earthwork in cuting in all sorts of soil and soft murrum including

conveying and spreading the stuff, embankment as and where directed

within 200meters from the end of the cutting with all required lead and 870.00 Cmt 137.33

145 Providing and casting in situ ordinary cement concrete M- 150 for

coping, over riding returns including formwork curing and finishing

146 Providing & fixing M.S. grills of required pattern in gaps of openings

including frame work etc. with one coat of red lead paint & two coats of 700.00 Kg 112.95

oil paint etc. complete.

147 Providing and fixing concertina coil fencing with punched tape

concertina coil 600 mm dia 10 mt openable length having 50 no rounds

per 6 mt length, upto 3mt height of wall with existing angle iron (50mm

x50mm x5mm )requird shaped As per Directed Engeenier in charge.

placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T. reinforced

barbed wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain 290.00 Rmt 342.39

horizontal, including necessary bolts or G.I.barbed wire tied to angle

iron, all complete as per direction of Engineer-in-charge, with

reinforced barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight

43.478 gm/meter at compound wall for ESR M4/ intakewell.

148 Constructing cattle trap made from ISMC 100 border and G.I. Pipe

50mm dia HEAVY DUTY at 12 cm spacing by welding and necessary

support of I.S.M.B. 100 x 75 x 6 section fixing in prepard chamber as per 12.00 Sqmt 4920.72

drawing by necessary arrangement etc. Comp.

149 Plantation of trees in soil including digging 45 x 45 x 45cm size pits,

preparing soil, providing and mixing organic fertiliser, watering, planting 300.00 No. 35.35

and filling the pits as per direction including etc. comlete

150 Providing tree plants having minimum 1.00 mt height and healthy

growth various kinds as like Peltoform, Gulmahor, kananj, Amla,

Raintree, Saptaparni, Cherry Cryjeliya, Borsalli, Kadam, Buch, Champo, 300.00 No. 25.25

Asopalav and as suggested etc. complete. & Maintinence of 3 month

After Providing Tree Plant.

151 Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia. square

mesh of 2” x 2” and M.S. Flat of 25mm x 5 mm vertical support and

three rings of 20 x 3 mm flat, fixing on site in CC 1:4:8 and including oil 300.00 No. 939.30

painting two coats with red lead priming coat.

152 Providing and fixing H.D.P.E. water tank with necessary G.I. fitting over

flow pipe, boll valve, clamp, nipple etc. including placing on 90 raised

platform as directed.

153 Providing and erecting open well type horizontal monoblock pumpset

with C.I. body having following specification (I) 1 H.P. single phase open

well motor pumpset suitable for 145 lit/min (ii) Suitable for 32 dia. 1.00 No. 8080.00

delivery pipe with control panel & 10 mtr long 3 x 1.5mm 2 submersible

flat copper cable. (Cat-II type)

154 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (a) Screen filter 7000 Ltr per day

155 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (b) Pressure Gauge 1" dia (0-7 Kg/Cm/2) 2.00 No. 373.70

156 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (c) By Pass assembly gun metal

157 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (d) 32 mm dia. Control Valve Gun metal 2.00 No. 323.20

158 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (e) 16 mm lateral HDPE pipe 2.5 Kg including 3500.00 No. 10.10

fitting and micro Tibe / Dipper etc.

159 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per

drawing and requirement. (f) 1.2mm Micro tube

160 Providing and fixing Drip irrigation System of approved brand for

plantation including fixing with water supply line for plantation as per 400.00 No. 2.12

drawing and requirement. (g) Dripper 4 LPH / 8 LPH

161 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC

pipes for water supply line of the following outside dia. having white

colour complete with necessary fitting clamps etc. (B) 50 mm dia. 720.00 Rmt. 68.68

162 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC

pipes for water supply line of the following outside dia. having white

colour complete with necessary fitting clamps etc. (A) 32 mm dia. 430.00 Rmt. 44.44

163 Grassing with selection No. 1 doob grass including watering and

maintenance of the lawn for 30 days or more till the grass forms a thick

lawn, free from weeds and fit for mowing including supplying good 1000.00 Sqmt 90.90

earth, if needed (the grass and good earth shall be paid for separately).

164 Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work 3900.00 Cu.M 1108.12

165 Demolition of Brick work and stone masonry including stacking of

serviceable material and disposal of unserviceable materials with all

lead and lift. (ii) In cement mortar.

166 Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding 3 600.00 Each 196.66

167 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings

and clamps including stacking the materials with all lead and lift ( for

any dia, of pipe)

168 Dismantling santtary fittings like wash basin . W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with

all lead and lift.

169 Supplying, installation, testing and commissioning of electric driven

Main Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (a) Horizontal type,

multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS

1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous

speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC 2.00 Nos 326834.02

supply with IP 55 protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated

Common base plate, coupling, coupling guard, foundation bolts etc. as

required. (d) Suitable cement concrete foundation duly plastered with

anti vibration pads.

1.1 2280 lpm at 70 m Head

170 Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming

to IS : 1520. Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP

class of protection for enclosure, horizontal foot mounted type with

Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common

base plate, coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

3.1 180 lpm at 88 m Head

171 Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Diesel Driven

Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete

with auto starting mechanism, 12 /24 volts electric starting equipment,

diesel tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick aluminium

sheet cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault

with audio indications, painted with post office red colour etc. as

required. M.S fabricated, common base plate, coupling, coupling guard,

foundation bolts etc. as required. Suitable cement concrete foundation

duly plastered and with anti vibration pads.

2.7 2280 lpm at 70 m Head

172 Fabrication, supply, Insallation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type, fabricated

out of 2mm thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved shade after

tank treatment process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD specification with

following in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required

: 5.1 INCOMING - 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital

Voltmeter 0-500V with selector switch Digital Ammeter (0-400 A) with 2.00 Nos 254917.89

selector swtich & CTs etc. LED type RYB phase indicating lamps, ON,

OFF, trip indicating lamps Set of Copper Bus Bar 300A

OUTGOING ( Note : All outgoing feeders for pumps should have digital

Ammeter with selector switches, and LED type ON, OFF, trip indicating

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta

starter suitable for 60 HP pump with overload protection, current

sensing type single phase preventor complete with all acceessories and

internal wiring required for automatic operation, selector switch for

local/remote, auto/manual/OFF operation. Jockey Pump

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic

173 Supply Of 12 V Battery, Coolant ,Engine Oil And Diesel Tank 2.00 SET 35350.00

174 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 1239/3589 i/c fittings like elbows, tees,flanges,tapers,

nut bolts, gaskets etc. in ground including welding,excavation &

providing cement concrete blocks as supports,anticorrosive treatment 284.00 Rmt 3368.39

with coaltar/asphalt tape as per IS 10221,refilling the trench etc.of

following sizes complete as required.150 mm dia

175 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 12.00 Rmt 3059.10

more coats of synthetic enamel paint of required shade complete as

176 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 560.00 Rmt 2262.88

more coats of synthetic enamel paint of required shade complete as

required:100 mm dia

177 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 350.00 Rmt 1668.91

more coats of synthetic enamel paint of required shade complete as

required:80 mm dia

178 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 260.00 Rmt 1134.42

more coats of synthetic enamel paint of required shade complete as

required:50 mm dia

179 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 200.00 Rmt 915.29

more coats of synthetic enamel paint of required shade complete as

required:40 mm dia.

180 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 3589/IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or 1070.00 Rmt 658.43

more coats of synthetic enamel paint of required shade complete as

required:25 mm dia.

181 Wrapping & Coating of Underground Pipe. with 4mm damar coat for

Pipe Coating etc.suitable for pipe size 380.00 Rmt 252.50

182 Supplying,fixing,testing & commissioning of double flanged sluice valve

of rating PN 1.6 with non rising spindle,bronze/gun metal seat,ISI

marked complete with nuts,bolts,washers,gaskets and conforming to IS 6.00 Nos 20157.12

780 of following sizes as required:150mm

183 Supplying,fixing,testing & commissioning of double flanged sluice valve

of rating PN 1.6 with non rising spindle,bronze/gun metal seat,ISI

marked complete with nuts,bolts,washers,gaskets and conforming to IS 4.00 Nos 12965.41

780 of following sizes as required:100mm

184 Supplying,fixing,testing & commissioning of double flanged sluice valve

of rating PN 1.6 with non rising spindle,bronze/gun metal seat,ISI

marked complete with nuts,bolts,washers,gaskets and conforming to IS 3.00 Nos 9471.70

780 of following sizes as required:80mm

185 Supplying,fixing,testing & commissioning of butterfly valve of PN

rating with bonze/gunmetal seat duly ISI marked complete with

nuts,bolts,washers,gasket conforming to IS 13095 of following sizes as 16.00 Nos 7934.90

required:150 mm dia.

186 Supplying,fixing,testing & commissioning of butterfly valve of PN

rating with bonze/gunmetal seat duly ISI marked complete with

nuts,bolts,washers,gasket conforming to IS 13095 of following sizes as 20.00 Nos 5904.43

required:100 mm dia.

187 Supplying,fixing,testing & commissioning of butterfly valve of PN

rating with bonze/gunmetal seat duly ISI marked complete with

nuts,bolts,washers,gasket conforming to IS 13095 of following sizes as 8.00 Nos 4412.15

required:80 mm dia.

188 Supplying,fixing,testing & commissioning of butterfly valve of PN

rating with bonze/gunmetal seat duly ISI marked complete with

nuts,bolts,washers,gasket conforming to IS 13095 of following sizes as 8.00 Nos 3350.60

required:50 mm dia.

189 Providing,installation,testing and commissioning of non return valve of

following sizes conforming to IS:5312 complete with rubber gasket,Gi

bolts,nuts,washers etc.as required:150 mm dia.

190 Providing,installation,testing and commissioning of non return valve of

following sizes conforming to IS:5312 complete with rubber gasket,Gi

bolts,nuts,washers etc.as required:100 mm dia.

191 Providing,installation,testing and commissioning of non return valve of

following sizes conforming to IS:5312 complete with rubber gasket,Gi 8.00 Nos 5127.87

bolts,nuts,washers etc.as required:50 mm dia.

192 Supply, Installation, Testing and Commissioning of Gun Metal Air

Release Valve with necessary fittings. Size: 25 mm 9.00 Nos 2373.50

193 Supply, Installation, Testing and Commissioning of 100 mm dia

Pressure Gauge (for all pipes) of range 0 - 15 Kg / cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast aluminium,

stove enameled, black, weather proof case with outer, screwed 9.00 Nos 2777.50

aluminium bezel and complete with necessary U-type stainless

steel siphon tube and cock including providing suitably painted angle

iron support to the tube etc.as per required.

194 Providing & fixing of pressure switch in M.S pipe line including

connection etc. As required. 4.00 Nos 3383.50

195 Providing, fixing, testing & commissioning of 50sqmm 3.5 Core

Alluminium Armoured Cable of required size from Main 3 phase

connection to Fire Pump House with 100 Amp MCCB with Cover as 1150.00 Rmt 398.95

196 Providing,installation,testing and commissioning of Y satrainer

fabricated out of 1.6 mm thick stainless steel,grade 304,sheet with 3

mm dia holes with stainless steel flange.150mm

197 Supplying and fixing single headed internal hydrant valve with

instantaneous Stainless Steel coupling of 63mm dia with cast iron wheel

ISI marked conforming to IS 5290 (type-A)with blank cap and chain 29.00 Nos 5254.57

198 Supplying and fixing Double headed external hydrant valve with

instantaneous Stainless Steel coupling of 63mm dia with cast iron wheel

ISI marked conforming to IS 5290 (type-A)with blank cap and chain 11.00 Nos 12625.00

199 Supplying & fixing 63mm dia gun metal short branch pipe with 20mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling 40.00 Nos 2139.34

required:Gun metal

200 Supplying and fixing 63mm dia,15 m long RRL hose pipe with 63mm dia

male and female couplings duly bound with GI wire,rivets etc. 80.00 Nos 4606.40

conforming to IS 636 (type-A) as required:Gunmetal

201 Supply, Installation, Testing and Commissioning of Weather proof

Standard Fire Hose Cabinet wall mounting type (750 mm x 600 mm x

250 mm deep) having single or double opening with necessary locking 40.00 Nos 3535.00

arrangement by allan key suitable for housing 2 nos. hose pipe, 1no.

Branch pipe & nozzle spanner.

202 Supplying and Fixing of fire brigade connection of cast iron body with

gun metal male instataneous inlet couplings complete with cap and

chain as reqd. for suitable dia MS pipe connection conforming to IS 904 3.00 set 12375.46

as required:4 way 150mm dia MS pipe

203 Supplying and Fixing of fire brigade connection of cast iron body with

gun metal male instataneous inlet couplings complete with cap and

chain as reqd. for suitable dia MS pipe connection conforming to IS 904 3.00 set 5970.25

as required:2 way 100mm dia MS Pipe

204 Supply, and fixing First Aid Hose Reel with MS construction spray

painted with P.O red,conforming to IS 884 complete with the following

as required. 20mm nominal internal dia

water hose thermoplastic(textile reinforced) type-2 as per IS

20mm nominal internal dia gun metal globe valve and nozzle. drum and 40.00 Nos 7682.68

brackets for fixing the equipment on the wall.Connection from riser

with 25mm dia stop gun metal valve & MS pipe and socket.30mtr.

205 SITC of Intelligent Analog Addressable Type Manual Call Point having

Surface or flush mounting

Option fully complaint to EN54 having Rotary Decade Switches for

Addressing from 01-99 complete with Back Box for Mounting Complete 25.00 Nos 9595.00

as required conforming to BS5839 Standards and Duly Approved by

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

206 SITC of Addressable Type Loop Powered Hooter Cum Strobe with

tone selection, volume setting features, IP24 housing, Wide operating

voltage range, complete with Mounting Base with required mounting

accessories as required conforming to BS5839 Standards and Duly 25.00 Nos 12685.60

Approved by EN54/LPCB Make: BOSCH/HONEYWELL/SYSTEM

207 SITC of Intelligent Analog Addressable Type Photoelectric Type Above

Ceiling Smoke Detector Complete with Respond Indicator Dual LED,

Hard Addressable Having rotary decade Address switches from 01-99,

complete with Mounting Base and required mounting accessories 370.00 Nos 4242.00

Complete as required Conforming to BS 5839 Standards and Duly

Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

208 SITC of 2 Loop Micro processor based 2 wire fault tolerant loop, (each

loop accessing 99 detectors and 99 modules) Networkable Fire Alarm /

Detection Control Panel. The panel shall be able to give location of all

fire/fault conditions of addressable units via the address codes. Further,

the panel must be able to automatically switch ON /OFF respective

control module when ever any alarm is triggered. The panel shall have

rectifier, Loop cards, 4x40 – Character LCD alphanumeric display with

back-light to indicate Fire/Fault Signal with address and analog output,

external/inbuilt printer to log all fire or fault events complete in all

respects. The panel should be networkable for up to 99 panels. The

Panel Shall be Sheet Steel Painted, sealed to IP30. The Panel Shall have

20 Zones with Individual LED Indicators, expandable to 200 LED 2.00 Nos 257550.00

Indicators. The Panel Shall have 3 Serial Ports. The panel shall have

provision to integrate with PA System and shall have provision to

connect to Building Management system through Modbus Card. The

panel shall have a 4 programmable sounder outputs, and open / short

circuit monitoring. The panel shall have a built in power supply and

battery charger, which should be capable to charge maintenance free

24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a

minimum of 24 hours with battery charger complete as required. and

conforming to BS5839 Standards and Duly Approved by EN54/LPCB as

per specifications.

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

209 Supplying and laying of 2x1.5 sqmm fire alarm armoured

cable,600/1000V rated with annealed copper conductor having XLPE

insulation,steel wire armouring &FRLS outer sheath complete as 4300.00 Rmt 152.89

210 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb

type sprinklers of rating 68 degree centigrade with required 300.00 Nos 462.22

accessories:Pendent sprinkler

211 Providing, fixing photo luminescent Signage's as per IS standard in Block

/ Small Letters on rigid sheet with necessary wall or Ceiling fittings as

Specified Sizes: For 8400.00 Sq.inch 9.09

Fire Extinguisher,exit,do not to do,etc.

212 Supply, installation, testing and commissioning of ABC type 6 kg

confirm to IS:15683, with ISI marked / TAC approved fitted with 42.00 Nos 2626.00

required accessories including wall suspension brackets.

213 FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide (CO2)

type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked /

TAC approved fitted with required accessories including wall suspension

214 Supply, installation, testing and commissioning of Modular ABC type

kg confirm to IS:15683, with ISI marked / TAC approved fitted

with required accessories including wall suspension brackets. 10.00 Nos 2525.00

215 Supply, installation, testing and commissioning of Stainless steel Ball

Valve. a) 25mm dia 50.00 Nos 1212.00

216 Providing Core Cutting for beam & Slab up to 25 mm to 100 mm dia

directed by engineer in-charge. 130.00 Nos 858.50

217 Supplying, Installing, Testing & Commissioning of M.S. structural steel

support. 3600.00 kg 90.90

218 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot

valve with flangs, Nut bolts, Gaskets etc. with necessary complete 4.00 Nos 16665.00

accessories.150mm

219 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot

valve with flangs, Nut bolts, Gaskets etc. with necessary complete 2.00 Nos 12625.00

accessories.100mm

220 3 Layer PVC Storage Tank 15000 ltr. Installation With all accessories

like M.T,L.T,Band,Clamp,Solution And Plumbing charges including as 2.00 Nos 166650.00

221 Fire Blanket 7.00 Nos 2222.00

222 Supplying FIRE bucket round bottom of 9 liters capacity made out of

gauge G.I Sheet with extra handle at bottom duly painted white inside

and Red out side with FIRE mark. Filled with dry-sand and kept on 28.00 Nos 1025.15

existing stand provided or hung on wall hook

223 Supplying and erecting floor mounting Stand for keeping four nos. of

FIRE buckets comprising 1500 mm in length, 900 mm height frame

made out of 30mm x 30 mm x 4 mm angle iron with cross supports legs, 7.00 Nos 5807.50

welded with 4 hooks and duly painted with one coat of primer and two

coats of approved enamel P O red paint.

224 Submitting the application to obtain Fire Plan Approval and After

Completion of Work Obtain Final Fire NOC for 3 Year 2.00 Nos 141400.00

225 Supply, installation, testing & commissioning of Priming tank, HDPE

type, 1000 litres, with necessary piping 100 mm size, G.I pipe for

priming the pumps, pipe of with butterfly valves for isolation, Water 2.00 Nos 53530.00

Filling to priming tank by piping min. 50 mm size, with all complete.

226 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and

Final NOC 11991.00 SQ.mtr 10.10

227 Providing, fixing, testing & commissioning of installation control valve

of cast iron body, brass/bronze working parts comprising of water

motor alarm, bronze seat clapper, clapper arm and hydraulically driven

mechanical gong bell to sound

continuous alarm when the wet riser/sprinkler system activates, 1.00 Nos 42686.67

pressure gauges, emergency releases, strainer, pressure switch, cock

valve complete with drain valve and bypass, test control box, ball

valves, MS pipe of required size, flanges, orifice plate, gasket etc of

follwing sizes as required : 150 mm Dia

228 Providing, fixing, testing & commissioning of installation control valve

of cast iron body, brass/bronze working parts comprising of water

motor alarm, bronze seat clapper, clapper arm and hydraulically driven

mechanical gong bell to sound

continuous alarm when the wet riser/sprinkler system activates, 1.00 Nos 39852.42

pressure gauges, emergency releases, strainer, pressure switch, cock

valve complete with drain valve and bypass, test control box, ball

valves, MS pipe of required size, flanges, orifice plate, gasket etc of

follwing sizes as required :100 mm Dia

229 FIRE DETECTION SYSTEMS ,Supply, installation, testing and

commissioning of Below False Ceilling Addressable ideal optical smoke

detector for detecting visible smoke particles with Mounting Base Item 10.00 Nos 3832.95

as per drawing and specifications, as approved by electrical engineer

230 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb

type sprinklers of rating 68 degree centigrade with required 10.00 Nos 546.68

accessories:Horizontal side wall sprinkler

231 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb

type sprinklers of rating 68 degree centigrade with required

accessories:Concealed sprinkler

232 Supply, installation, testing and commissioning of K type KITCHEN FIRE

EXTINGUISHER 6 kg confirm to IS:15683, with ISI marked / TAC

approved fitted with required accessories including wall 2.00 Nos 22220.00

suspension brackets.

233 Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm

thick GI Sheet cladded 40mm thick shutter complete with GI frame

(Single Ribet – Frame Profile 100 x 57mm) made from 1.20mm thick GI

Sheet & Fixing arrangements AS PER BS 476 PART- 20 & 22 & IS:

Part - II for Integrity, Stability.Door Size: 2000mm (W) x 2100mm (H)

Including below Accessories S.S. Ball Bearing Hinges- 6 Nos Vision Panel 2.00 Rmt 79285.00

with Fire Glass of Size: 200 x 300mm - 2 Nos Heavy Duty Door Closer -

Nos Heavy Duty Door Closer - 2 Nos Panic Exit Device for Double Leaf

Door - 1 No. External Trim Bar (Panic Latch) - 1 No.

234 Providing PPGL Sheets roofing fixed with galvanised iron J or L

hooks,Bolt & nuts 8mm dia with bitumen and G.I. limpet washer filled

with white lead complate excluding the coat of purlinss,Rafters (1) 0.80 150.00 Sqmt 734.19

mm thick sheet.

235 Providing and fixing machine cut, free edges, pre mirror polished

Grenite marble stone slab 18 mm thick (single piece not less than

cm ) for vertical wall/Doors/Windows Sill,Jams for cladding as per

design including full moulded round inside edge and laid on 10 mm

thick cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey

cement slurry including rubbing and polishing finishing etc. complete.

236 Providing and fixing jindal E (30 mm) series Four track alluminimum

window (3 shutter + 1 Mosquito net shutter) standard extureded colour

anodized section with frame having frame bottom member jindal

section no:21998 @ wt. of 3.197 kg/Rmt, frame side and top member

jindal section no.:21204 @ wt. of 1.694 Kg/Rmt with sliding shutters of

single glass shutter top bottom member Jindal section no.20993 @

wt.of 0.839 Kg/Rmt & side member jindal section no. 20550 @ wt. of

0.994 Kg/Rmt & inter lock member jindal section no. 20553 @ wt. of

0.731 Kg/Rmt. with 5 mm thick transperent plain float glass in shutter

including fitting, fixtures, rubber gasket and transperent silicon seleant

as per drawing and instruction of engineer in charge etc. completed for

Window Three Track

237 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete cat lll

w.c. area point 50% 157.00 Pts. 242.91

238 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic

fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting 247.00 Pts. 674.68

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

239 Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules 303.00 Pts. 257.55

erected on / in wall / ceiling with following type accessories cat lll

240 Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary 0.00 0.00

connections as per site situation directed by Engineer In charge.

(a) (7) Blank Plate Single Cat.III 30.00 Ea 25.25

(b) (4) TV Co-axial Socket outlet CAT lll 19.00 Ea 160.59

(c) (8) Computer RJ-45 socket cat lll 46.00 Ea 160.59

(d) (9) 16 Amp. SP one way switch Cat.III 290.00 Ea 180.79

(e) (10) 6/16Amp. Universal socket Cat.III 290.00 Ea 199.98

241 Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & 0.00 0.00

Clamps with following dia of pipes, in approved manner as directed

242 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth 3612.00 Mtr. 82.82

continuity of following size Cat.III

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

243 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of 0.00 0.00

following size Cat.III

(A) with medium class Rigid PVC pipe and accessories

(a) (a) 2 wire 4 sq. mm 891.00 Mtr. 112.11

(b) (b) 2 wire 6 sq. mm 70.00 Mtr 147.46

(c) (h) 4 wire 6 sq. mm 920.00 Mtr. 260.58

244 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.

(a) (b) One wire 1.50 sq. mm 18.00 Mtr. 17.17

(b) (f) One wire 10.00 sq. mm 128.00 Mtr. 91.91

(c) (h) One wire 25.00 sq. mm 14.00 Mtr. 236.34

(d) (i) One wire 35.00 sq. mm 4.00 Mtr 300.98

(e) (l) One wire 95.00 sq. mm 1.00 Mtr 919.10

245 Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected as

directed. 226.00 Mtr. 46.46

e) 1.50 Sq.mm 3 core round PVC sheathed

246 Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper insulated

with Foam PE & Secondary conductor made of poly - Aluminium film 202.00 Mtr 62.62

bonded Al. Braids @ suitable coverage overall sheathed with black PVC

insulation. (e) RG-11

247 Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [C] CAT - 6 1285.00 Mtr 47.47

248 Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with

necessary connections as directed 46.00 Ea 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat lll

249 Decorative call bell Ting-tong box type 250 volts complete erected 20.00 Nos. 71.71

250 Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED 470.00 Nos. 535.30

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet,cat lll

251 Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 157.00 Nos. 112.11

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii)

5 to 8 watts cat lll

252 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire 55.00 Ea 4997.48

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii) above 48 to

(a) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection (vii) above 200 to

250 watts cat lll

253 Pproviding and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all internal 5.00 Ea 6173.12

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

254 Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader 1.00 Ea 8055.76

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

255 Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal 2.00 Ea 20946.39

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

256 Supplying & erecting approved make Four Pole 415V change over

switch interior for panel mounting with operating mechanism A.C.23

duty confirming to IS for (E)250A / 320A

257 Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape for phase

sequence of following current carrying capacity, erected with necessary 0.00 0.00

bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(a) (A) Suitable for 100 Amp. Capacity 1.00 Rn.Mtr 1961.42

(b) (C) Suitable for 300 Amp. capacity 1.00 Rn.Mtr 4909.61

258 providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing 55.00 Ea 270.68

box. confirming to IS 8828/1996 with ISI Mark cat lll

259 providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI 468.00 Ea 112.11

260 Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (B) 40 Amp. 27.00 Ea 330.27

261 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity (c)63 Amp. Cat lll 86.00 Ea 737.30

262 Plastic enclosure fitted with DIN rail suitable for incorporating One /

Two nos. MCB 6.00 Ea 52.52

263 Plastic enclosure fitted with DIN rail suitable for incorporating Three

/Four nos. MCB 29.00 Ea 108.07

264 Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without 0.00 0.00

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(a) (A) single phase incoming and horizontal single phase outgoing (b) sheet

steel double door (IP-43) (iv)12 way 3.00 Ea 1492.78

(b) (B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door(iii)8 way 13.00 Ea 3412.79

265 providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do 102.00 Ea 2235.13

not incorporate any electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP cat lll

266 Providing and erecting HOT deep Galvanised iron strip wire 8 to

267 Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation. [A] For electrical

installation up to 440 V Length of Pipe - 1 Mtr Back filling compound -

Nos. of Bag of 15 Kgs.

268 Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire. 10.00 Ea 368.65

269 For using salt and charcoal / coke as required for pipe type earthing.

270 Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with necessary accesories , 1.80 sq. mtr 10468.65

supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end 0.00 0.00

terminal connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size. (A) locally 0.00 0.00

fabricated panel board (i) with 350 mm depth

271 Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on site 50.00 Kgs. 77.77

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

272 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables 0.00 0.00

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 100.00 Mtr 540.35

273 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of 0.00 0.00

(a) (B) 4 core 6 Sq. mm 1713.00 Mtr 126.25

(b) (C) 4 core 10 Sq. mm 450.00 Mtr 140.39

274 Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same and

making the surface as normal ground.

275 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal 20.00 Mtr. 74.74

276 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below

ground across the road crossing or on floor with necessary material in

an approved manner and making the ground as per original.

277 Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-

3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor

as directed for laying of cable. The pipes as following size of dia & 0.00 0.00

weight per 6 mtr.

(A) 40 mm inner Dia. 1350.00 Mtr. 108.07

278 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. .(b) 2 to 4 core 6 Sq. 101.00 Ea 38.38

(C) 2 to 4 core 10 Sq. mm 14.00 Ea 38.38

279 Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of 0.00 Ea

280 Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts 0.00 0.00

in an approved manner.

281 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with , 247.00 Ea 1948.29

canopy & 30 cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

282 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

Pipe down rod erected duly painted for fan complete with proper 247.00 Mtr. 108.07

insulation without leakage and earthing.

283 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in 247.00 Ea 108.07

Ceiling with necessary finishing.

284 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Fan box. 247.00 Ea 18.18

285 Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame. 71.00 Ea 1703.87

200mm with 1350RPM Cat.II

286 Supplying & erecting single phase approved make industrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM [A] 15.00 Ea 2054.34

305 mm dia 900 RPM cat ll

287 Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB 0.00 0.00

Mounting, stud type terminal and arrangement for cable termination

to be erected With Suitable foundation (Included) as per details given

by manufacturer considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with 29.00 Ea 6874.06

necessary G.I. J Bolts .Approx Pole weight 46 kg

288 Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting 28.00 Ea 476.72

clamp with nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (C)150mm x 125mm x

289 Supplying and erecting Street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing

the brackets and having spread of 0.5 mtr. Length with 110 deg.with 29.00 Nos. 450.46

vertical plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following nos

of arms. [A] Single Arm bracket 0.5 Mtr

290 Supplying and erecting B class galvanised iron pipe 32 mm outside dia

45 cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,

erected on wall or corner for mounting street light luminaire with 26.00 Ea 343.40

necessary hardware materials duly painted.

291 Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete 0.00 0.00

foundation and 45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side,

with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the Section

Pillar inside and out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage proof & tested as 2.00 Nos. 16691.26

per IP 55 test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm

section pillar fabricated from 14 Gauge MS Sheet with angle iron legs

cm long made from 40 X 40 X 6 mm thick MS angle.

292 Supplying and erecting HYLAM sheet on existing angle iron frame.for

following thickness (A) 2mm 2.70 sq.mtr 385.82

293 Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching. 2.00 Ea 3168.37

Programming switches & housed in fire proof thermoplastic enclosure

& transparent cover erected as required with necessary connection

erected as directed.

294 Supplying & erecting power contactor ,AC3 duty for time switch

complete erected as per direction Cat III(D) 4 pole 440V 40 Amp. 2.00 Ea 2782.55

295 Providing and erecting approved make split air-conditioning unit

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper 2.00 Ea 46288.30

tubing,drain PVC pipes suitable for ( cost includes powder coated Stand,

Eco Friendly green gas charging, 15A plug top & Remote Control) with

necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (c)

for 2 ton capacity

296 Supplying and erecting insulated pair of soft copper tubing open or

concealed including power and control cable,necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

297 Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil, 6.00 Ea 55893.40

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

298 Supplying & erecting reverse osmosis (RO) water purification system

with M.S. powder coated pedestal frame, prefilter housing carbon filter

suitable buster DC pump, auto low & high pressure switches with

following size of LPH capacity & erected as directed [D] 100 LPH with

phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 -

Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron cartridge 6.00 Ea 77891.20

filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No -

Shimge /CRI /Lubi), RO Membrane housing with RO membrane of

40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter

-(2 Nos), with Recovery Rate 50%.

299 Supplying and erecting approved make suitable panel indicator LED type

lamp, lens cover, complete erected with necessary connections. 9.00 Nos. 43.43

300 Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having [D]

For 5 HP 3 phase open well horizontal mono block pump set suitable for 4.00 Ea 18746.61

1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe cat ll

301 Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter, Voltmeter 4.00 Ea 7722.46

each with two way selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

302 Lowering of submersible motor pump set at the depth of following

,complete with required. Nos. and size of casing pipes erected by means

of proper chain pulley block & pipe wrenches after checking of threads

of each pipe with coupling to take the load of the pump set and pipe 4.00 Per Job 856.48

assembly filled up with water (D)For Open well Horizontal submersible

pump set for sump well (i) 1 HP to 5 HP

303 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following Size. (C)

3 Core x 4 Sq. mm

304 Providing Water proof straight Joint in PVC insulated flat flexible copper

cable by using insulating material, water proofing material, & making

the joint complete. (A) Up to 10Sq. mm

305 Supply of Approved make Iron Clad or metal clad four pole change over

switch 415V. confirming to IS of following capacity (A) 63 A cat lll

306 Erection & connection charges for 63 A / 100A / 125 A change over

switch as following (b)Erection on New angle iron frame duly painted

307 SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the

projector should have auto vertical key stone correction of +/-

degree and Manual Horizontal of +/-30 degree. the projector should

have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens

focus Manual having focal length 16.9mm to 20.28mm. projector

should have features like AV mute slide, quick corner and split function

and should support wireless functionality with inbuilt wifi or wifi

dongle. [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

308 SITC of universal Projector mounting kit, with necessary grouting,

fasteners etc. with adjustable height and suitable for all types of

projectors. [Approved by Competent Authority i.e. not Below the rank 3.00 Ea 6848.81

of Executive Engineer ]

309 SITC of 120 inch Self Lock MW (8 x 6) Instalock Slow Retraction Screen,

Aspect Ratio-4:3

[Approved by Competent Authority i.e. not Below the rank of Executive 3.00 Ea 5334.82

310 Supplying, erecting, testing, commissioning approved make M.S.

Polygonal High Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 &

Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for erection of luminaries of

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For

16 mtr and above size) 0.00 0.00

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor =

No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable

(e) Bottom most section suitable for mounting reversible motor and

switchgears having door not more than 1400mm x 300mm with

waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & 0.00 0.00

commissioning of the entire structure for following size of High Mast

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of

Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x

20 mm thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable 3.00 Ea 141616.14

for mounting Fitting of Light - 6 Nos.

In Words: Sixteen Crore Seventeen Lakh Eighty One Thousand Six Hundred Sixty Eight Rupees and Sixty Two Paise.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual

mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 6481074.78 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost before execution as directed and to

be approved from the engineer in charge.

Dy. Executive Engineer Executive Engineer

Rajpipla (R&B) sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla