Flood 2018 - Urgent Rectification works for motor pump set, starter and electrical accessories at LI Scheme Kadathy

Supply and filling best quality Transformer Oil to the starter and regulator tank including conveyance charges

S & F 32A, TP/TPN AC 23 A duty switch disconnector unit (isolator) complete with handle assembly, door inter lock and padlocking arrangement of the following ratings:

200A TP/TPN AC 23 A duty

S & F HRC fuses - 2 -80A, DIN type fuse link of size 000

Do---125A-200A, DIN type fuse link of size 1--------Do

320A A, 70 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with thermal setting of 50 - 100% having adjustable OL & SC

Supply & providing shunt release up to 400A

rotary kit up to 250A

Supply and changing the existing Indication lamps on panel board with LED indication lamps and giving connections.

Supply and providing digital Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1

Three phase ammeter (A - R, Y, B) of accuracy class 1

Supply & Providing 3pole Power contactor with AC 23A Rating with necessary blots for mounting, ( L&T Make MNX - 140 or equivelent)

Supply & Providing Electrinic timer for FASD starter with necessary screws for mounting, ( L&T make )

Supply & Providing Thermal over load relay for FASD starter with necessary screws for mounting, ( L&T Make MN12/ Equivalent )

Flush head actuator - Red with legend "STOP" with 1 NC contact.

Flush head actuator - Green with legend " START" with 1 NO contact.

Supply & providing 5HP DOL Starter including giving connection after dismantling the existing damagaed starter

Supply and providing 2 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor suitable for direct connection to motors.

Supply and providing 15 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor suitable for direct connection to motors.

Street light fitting with 1x 16w LED street light fittings. lamp with aluminium housing, stove enameled CRCA sheet steel reflector cover, acrylic cover complete with lamp holder, APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS compliant,high lumen tube.

Supply & Providing Insulated fuse pulling handle for type HN Fuse link from 63 A to 800 A

Dismantling dis located Suction pipe 150 mm Cast iron suction pipe after providing necessary supports and resetting the pipe to the original position and refitting in normal position, using additional materials required. ( for Kalambur North LIS )

Supply , conveying and errecting the 150 mm dia MS pipe in suction side having sheet thickness 6 mm and cutting in to required length, facing the cutting edges,painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pumphouse and labour charges for loading, unloading,etc. ( for Kalambur North LIS )

Supply and providing the rough cut flange rings at the end of 150 mm MS pipe after facing the cutting edges of flange rings neatly and set out the flange rings in correct position to both vertical and horizontal planes and welding in two rows accurately, painting two coats of synthetic best quality enamel paint over a coats red oxide primer including providing necessary nuts and bolts , rubber packing grease etc , all labour charges for lifting and holding of pipes as per the necessity of welder at site.( for 1 joint ) ( for Kalambur North LIS )

Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Supply & filling pump lubrication oil in the pump oil chamber