Supply, laying/termination of new control/power cables along with installation, testing and successful commissioning of SCADA system and associated panels at 3x42MW Larji HEP under Resident Engineer, Larji Power House, Division HPSEBL, Thalout.

SUPPLY PART(excluding labour cess)

Providing PVC insulated screened cable and overall extruded FRLS outer Sheathed, unarmoured Copper Conductor (flexible) control cable of size 04Cx4.00 mm sq., 1.1 KV, Make: Havells/Polycab/KEI.

Providing PVC insulated screened cable and overall extruded FRLS outer Sheathed, unarmoured Copper Conductor (flexible) control cable of size 07Cx1.00 mm sq., 1.1 KV, Make: Havells/Polycab/KEI.

Providing PVC insulated screened cable and overall extruded FRLS outer Sheathed, unarmoured Copper Conductor (flexible) control cable of size 07Cx2.50 mm sq., 1.1 KV, Make: Havells/Polycab/KEI.

Providing PVC insulated screened cable and overall extruded FRLS outer Sheathed, unarmoured Copper Conductor (flexible) control cable of size 12Cx1.00 mm sq., 1.1 KV, Make: Havells/Polycab/KEI.

Providing PVC HDPE pipe of size 1.5 inches

SERVICE PART(including labour cess)

Dismantling of existing Protection Panels: Removal of the existing CASA panels, Dam RTU Panel,6.3 MVA Station Transformer RTCC panel by disconnection of existing external wires from the panel terminals, these cables are to be dismantled from the old panel and securely put below this panel as per the direction of Engineer-in-Charge from the location and its stacking upto a lead 50 mtr. within the Power House. After stacking, the dismantled panels has to be safely transported to the nearby store completing the job in all respect.

Installation and cabling of new CASA Panels, RTCC Pane, Dam RTU Panel and SCADA Network panels along with associated working station. (i) Carriage of CASA LCB Panel, SCADA Control Desk material and other associated material from HPSEBL Store Thalout to Larji Power House. (ii) Shifting of CASA LCB Panel, RTCC Panel, Network Panel, SCADA Control desk material to the site of installation. (iii) Installation of new panels at the location of old panel including earthing etc. by welding, cutting, grinding complete in all respect. (iv) Dam RTU shall be placed in place of the old RTU at the dam site (v) Laying of cables as per new cable schedule (vi) Terminations in the new panel side as well as at the other side of existing Panels, as per new cable schedule. Dressing of all cables in the panels cable trays. (vii) Providing assistance to the BHEL Engineer including doing the job of any change/addition in wiring during testing & commissioning stage. Testing & Commissioning engineer would be provided by the owner.

Please Enable Macros to View BoQ information