Tender No. 32/EDC(s)/2022-23

Amount

ST Pole SP-23 (Bottom Portion hot dip )

Stay Set 16 X 1800 mm

Stay Wire 7/3.15 mm 7/10 SWG

MS Earth Rod 20 X 2500mm

GI Wire 3.15mm/10 SWG

Earth Wire 7/1.6 mm 16 SWG

MS Channal 100 X 50 mm

MS Angle 65x65x6 mm (for Bracing set)

MS Angle 75x75x6 mm ( For Guarding)

GI Wire 5mm/6SWG

11 KV Polymer Disc Insulator (B&S) Type

11 KV Disc fitting B&S Rabbit/ Weasel/45KN

11 KV Polymer Pin insulator with Pin

ACSR Weasel Conductor

11 KV G/O Switch

11 KV PRMC

Cable Al. 3x70 Sq.mm.XLPE 11 KV

11 KV CJ Kit 3x70 Sq.mm.(I/D)

11 KV CJ Kit 3x70 Sq.mm.(O/D)

Electronic KWH Meter TVM 11KV RS-232 Port

PP Clamp for ST Pole SP-23 with N&B

Stay Clamp for ST Pole SP-23 with N&B

Earth Clamp for ST Pole SP-23 wth N&B

Bracing Clamp for SP-23 with N&B (Top)

Bracing Clamp for SP-23 with N&B (Bottom)

Denger board with clamp

Labour

Febrication of MS Channal/ Angle with good finishing.

Excavation of earth for pit of size 0.9x0.6x1/6 of full leenth of Pole for erection of Pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil & disposal of surplus excavated soil as directed complete work.

Erection of following support pole in proper level and alignment alongwith fixing of all accessories as per RESSPO construction mannual.

SP-23 ( Single Pole )

SP-23 ( Diuble Pole)

SP-23 ( Four Pole)

Grouting of Pole oin size 0.45x0.45x1/9 of the support in cc ratio 1:4:8 block including cost of cement sand & stone ballast back filling of soil and boulder in pit and rammming amd proper alignment leveling as per resspo construction mannual.

Excavation of earth for Stay of size 0.6x0.6x1.2 mtr. In all type of soil including proper dressing of side and ramming of bottoim including getting out the excavated soil and disposal of surplus excavated soil as doirected compleete work.

Fixing & tighting and nozelling of saty with pole & stay rod on required tension as per drawing/ RESSPO mannual. (11 KV Line)

Grouting of Stay in sizee .6x.6x.3 in cc ratio 1:4:8 block including cost of cement, saand & stone baallast back filling off soil in boulder inpit and ramming and proper alaigment, leveling as per resspo mannuaal.

Muffing of Poles with cc 1:3:6 block and 45cm hight from ground level including cost of ballast, cement and send.

Spreading, Stringing & Sagging of ACSR Weasel Conductor 3 Phase 11 KV Line with complete jumphering.

Construction of Reatining wall for four pole structure and tri pole structure size of wall 2.75x2.75x2mtr (Bottam size 2.90x2.90 mtr top size 2.60C2.60 mtr

(a) Excavation in each type or earth in nmy area by mechanical means top foundation size 2.90x2.90x0.45mtr including cutting of slopes and trimming of side slpes including lead lift and disposal of surplusmaterial as per direction of Engineer in charge (b) Providing C:C size 2.90x2.90x0.10 in open founsation in C:C 1:4:8 including the cost of cement sand and stone as per direction of engineer in charge. (c) Random Rubbie Stone Masonry laid in 1:5 cement sand and mortar in retaining wall size of wall (2.75x2.75x1.80 mtr.) by approvaed stone including supply of all material labour and T&P required for proper completion of work as per direction of Engineer in charge. (d) Providing C:C size 2.60x2.60x0.10 in top of retaining wall in C:C:1:2:4 including the cost of cement sand and stone as per direction of engineer in charge

Construction of Reatining wall for double pole structure size of waf 2.75x95x2mtr (bottom size 2.90x1.10 mtr Top size 2.60x0.80mtr)

(a) Excavation in each type or earth in hilly area by mechanical means for foundation size 2.90x1.10x0.45mtr including cutting of slopes and trimming of side slpes including lead lift and disposal of surplusmaterial as per direction of Engineer in charge (b) Providing C:C size 2.90x1.10x0.45 in open foundation in C:C 1:4:8 including the cost of cement sand and stone as per direction of engineer in charge. (c) Random Rubbie Stone Masonry laid in 1:5 cement sand and mortar in retaining wall size of wall (2.75x2.75x1.80 mtr.) by approvaed stone including supply of all material labour and T&P required for proper completion of work as per direction of Engineer in charge (d) providing C:C size 2.60x0.80.0.10 on top of retaining wall in C:C 1:2:4 including the cost of cement sand and stone as per direction of engineer in charge

Earthing of Line

Fixing of Denger board.

Louping Choping of Tree branches.

Fixing of CJ Kit.

Laying of 11 KV XLPE Cable 3x70 Sq.mm. with digging of 0.5 mtr. Depth trunch with Filling of Send & Mud.

Installation of 11 KV Metering Cubical in the metering room

Painting of Poles with angle and channel and all steel part by one coat of red oxide primer and two coat of AL paint and two strip of Fluoresent alternate red and white paint 30 cm wide upto 1.5 Mtr. From ground level.

Constuction of metering room for metering cubical at S/s end including cost of building/ material and it also include the cost of gate etc.

Mounnting & Fixing of TPMO on double pole structure including making of connections complete work

Guarding of 11 KV line

garg enterprises

national engineers and associates