Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-AOC 37 PRAKASH LOK PHASE II SHIMLA BYPASS ROAD DEHRADUN UTTARAKHAND | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC 1st lowest bidder | |
| 2 | L2₹3.8 L+₹46,574.50 (13.9%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest bidder |
Tender Value
₹3.2 L
EMD Value
₹6,325
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer(C)
BSNL Civil Division, Luxmi Road, Dalanwala, Dehradun
Aluminium Partition for the Office of DE(Tax) and DE (Trans) in vacated area of OCB exchange at first floor of BSNL T.E Building, Patel Nagar, Dehradun
2024_BSNL_191914_1
99/EE(C)/BSNL/CD/DDN/2023-24
Open Tender
Civil Works
Item Rate
30 days
Dehradun
Please refer to DNIT
12 documents required · 12 mandatory
₹590
Yes
AO(Cash) O/o GMT, BSNL, Dehradun BA
₹6,325
Yes
Dehradun
30 Apr 2024
19 Mar 2024
30 Mar 2024
19 Mar 2024
27 Mar 2024
19 Mar 2024
23 Mar 2024
Amount
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.
French spirit polishing :
One or more coats on old work.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Dismantling removable raised / false access flooring with complete system & its component comprising of floor panels , supported GI rectangular stinger frame work and GI pedestal with GI base plate all complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead all complete as per the direction of the Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). With departmental supplied aluminium section
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
WITH DEPARTMENTAL SUPPLIED PARTICLE BOARD
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
WITH DEPARTMENTAL SUPPLIED FLOAT GLASS
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
Powder coated minimum thickness 50 micron aluminium
Fixing DEPARTMENTAL SUPPLIED 12 mm thick prelaminated particle board as wall lining with necessary screws/nuts & bolts/ nails fixed on wooden / steel frame work / aluminium tube frame work all complete as per direction of Engineer-in-charge
(Repairing existing chips flooring with cement and required pigment and rubbing of existing terrazo floor and skirting with grinding machine, cleaning of floor with detergent and spreading saw dust all complete as per the direction of Engineer-in-charge. Note :- Polishing of floor shall be paid for separately)
Credit for dismantled unserviceable material
Old dismantled reinforcement bars/ steel sections / GI pipes / SCI pipes / GI sections and alike etc.
Old False flooring particle board panels with GI sheet as backing and laminated sheet on top.12mm Board (old)
Cleaning of existing false ceiling, aluminium partition, wall panelling and aluminium doors with soap water after removing stickers , paint marks with paint remover and finally cleaning with dry cloth all complete as per direction of Engineer-in-charge.
CHANDU LAL
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .