MOE3/2729/22 -(Vol2), Urgent repairs to High mast structure and renewal of LED fittings near KSRTC bus stand.

Amount

Repair of High mast

OD112889/2023-2024:Charges for dismantling existing 18 metre High mast structure from the base with the help of heavy duty Crane and required labours and refixing in position after repairs to mounting ring etc and refixing in position .

OD112439/2023-2024:Supply and renewing High Mast Head made with optimum grade raw material suitable to be fitted in poles for making it extremely durable to withstand adverse weather condition

OD112930/2023-2024:supply and providing Schacle for tightning steel in position using suitable nut bolt etc

OD112440/2023-2024:Supply and renewing S S wire rope 6MM dia , S.S, GRADE-304 STEEL Twisted type

OD112678/2023-2024:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)(make-Havells/Philips/Surya)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD112915/2023-2024:Fabrication of fully partitioned, dust and vermin proof enclosure for metering/control accessaries cubicle as per approved design and requirement, with front access facility,with lockingarrangement using 2.00 mm CRCA sheet with powder coating the assembly after subjecting to 7 tankprocess etc as required. The cubicle shall be water proof and rain guard of sufficient size shall beprovided at the top. The measurments should be taken the area of the complete sheets used for panel board excluding base frame etc .

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD112442/2023-2024:Supply and fixing 32A HRC fuse base with HRC fuse link

OD112443/2023-2024:Supply and fixing of Neutral link 32 A, 2 Way neutral links mounted on DMC/SMC base

OD112444/2023-2024:Supply and fixing Time switch 240 V AC DIN/BASE mounting type and giving connection

OD112445/2023-2024:Supply and fixing 40A AC1 MNX 4 pole power contractor (L&T)in the existing enclosure and giving connection

90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.12.9.3:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

OD112704/2023-2024:Earthing with GI earth pipe 1 mtr. long 40mm dia. medium class including providing 12mm dia,drilled holes minimum 6 nos along the entire length in alternate arrangement providing test joint using 2 nos ,25x3mm GI strip minimum size 25cm suitably shaped and tightly clamped to the pipe electrode using 25x6 mm steel bolts ,nuts &washer & providing 2 nos ,6mm dia. drilled holes for clamping & bolting earth lead & making masonary chamber made of bricks and duly plastered

90.16.3.2:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip

90.6.5.20:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

OD113017/2023-2024:Charges to be paid to KSEB for availing/Shifting service connection. Payment will be as per actual paid voucher to the KSEB

AJITH

Bidder Name

CHANDRAMOHANAN

AJITH