Construction of Niabat Office at Keegam Shopian

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer R&B Division Shopian

Name of Work: Construction of Niabat Office at Keegam Shopian

Contract No: 55/5973-85 /RnB/ SPN /e-Tendering/2025-26 Dated:- 11-11-2025 Adv cost (in lacs) :-14.09 (Base cost=11.94+GST=2.15) INR

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Discription Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Earth work in excavation all kinds of soil by mechinical means in trenches for foundations etc including dressing of sides and ramming of bottoms, all leads, lift including getting out excavated earth and disposal of surplus excavated earth as per the directions of Engineer In-Charge complete 50.78 Cum 225.178 Excess(+) Full Conversion INR

2 Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete 6.44 Cum 762.712 Excess(+) Full Conversion INR

3 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete 5.24 Cum 4830.508 Excess(+) Full Conversion INR

4 Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 Cement, 1.5 Corase sand: 3 grade stone aggregate 20mm nominal size crushed including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level including all carriages involved complete 7.49 Cum 7076.271 Excess(+) Full Conversion INR

5 Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering including all carriages complete 17.53 Cum 6016.949 Excess(+) Full Conversion INR

6 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete. 9.36 Cum 8898.305 Excess(+) Full Conversion INR

7 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Inculding all carriages complete 1515.76 Kgs 104.407 Excess(+) Full Conversion INR

8 Providing and laying of Nalla Boulders handpacked as back filling of specified grade and size including ramming spreading watering and all carriages and loading, unloading complete 13.98 Cum 720.339 Excess(+) Full Conversion INR

9 Brick work with common burnt clay bricks of class designation 7.5 in plinth and foundation in Cement mortar 1:6 ( 1 cement : 6 fine sand) Including all carriages involved complete 5.95 Cum 7203.39 Excess(+) Full Conversion INR

10 Brick work with common burnt clay bricks of class designation 7.5 above plinth level in super structure upto floor-V level in Cement mortar 1:6 ( 1 cement : 6 fine sand) Including all carriages involved complete 15.74 Cum 8050.847 Excess(+) Full Conversion INR

11 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length of Imported wood including all carriages complete. And required coats of (termite proof/ damp proof coat )black japan paint 0.52 Cum 46610.169 Excess(+) Full Conversion INR

12 Providing and fixing 30 mm Thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge including all carriages complete.(Imported Wood) 11.1 Sqm 2118.644 Excess(+) Full Conversion INR

13 Providing and fixing 30 Thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge including all carriages complete (Imported Wood) 8.08 Sqm 2203.39 Excess(+) Full Conversion INR

14 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked MDF board 12 mm thick 7.95 Sqm 1525.424 Excess(+) Full Conversion INR

15 Providing glass panes 3.5 mm thick) window and door a) (upper fixed Portion) (Area of opening for glass panes excld portion inside shall be measured) 7.3 Sqm 805.085 Excess(+) Full Conversion INR

16 Providing and laying 50 mm thick Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone agg 20mm nominal size crushed) finished with a floating coat of neat cement slurry and curing including all carriages complete 26.23 Sqm 492.373 Excess(+) Full Conversion INR

17 15 mm cement plaster of mix 1:4 (1 Cement: 4 Fine sand) including all carriages complete 41.78 Sqm 287.424 Excess(+) Full Conversion INR

18 12 mm cement plaster of mix 1:4 (1 Cement: 4 Fine sand) including all carriages complete 40.3 Sqm 248.805 Excess(+) Full Conversion INR

19 Providing and applying 2mm thick white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 74.68 Sqm 158.475 Excess(+) Full Conversion INR

20 Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work ofapproved manufacturer, of required shade and colour complete as per manufacturer’s specifications 74.68 Sqm 78.814 Excess(+) Full Conversion INR

21 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 43.85 Sqm 86.441 Excess(+) Full Conversion INR

22 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of primer of approved brand of suitable shade with ordinary paint. 43.04 Sqm 174.186 Excess(+) Full Conversion INR

23 Centering and shuttering including strutting, propping etc and removal of form work for foundations, footings, bases of columns etc 76.01 Sqm 251.051 Excess(+) Full Conversion INR

24 Centering and shuttering including strutting, propping etc and removal of form work for lintels beams etc 24.56 Sqm 506.364 Excess(+) Full Conversion INR

25 Centering and shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platforms 43.93 Sqm 629.644 Excess(+) Full Conversion INR

26 Centering and shuttering including strutting, propping etc and removal of form work for Edges of slabs (below 20cms) 22.1 Rm 229.881 Excess(+) Full Conversion INR

27 Structural steel work in built up sections, trusses and framed work etc including cutting, welding, hoisting, fixing in position including soffits and applying a priming coat of approved steel primer including all carriages complete. 1636.03 Kgs 117.119 Excess(+) Full Conversion INR

28 Providing 0.50 mm thick Hi-Rib corrugated coloured G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete . 43.775 Sqm 1016.949 Excess(+) Full Conversion INR

29 Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm 8 RM 605.932 Excess(+) Full Conversion INR

30 Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (100x10mm) 68 Nos 59.322 Excess(+) Full Conversion INR

31 Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete . (150x10mm) 3 Nos 76.271 Excess(+) Full Conversion INR

32 Providing and fixing aluminum Aldrops ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete . (200mm) 2 Nos 211.864 Excess(+) Full Conversion INR

33 Providing and fixing aluminum Aldrops with lock system ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete .250mm 1 Nos 677.966 Excess(+) Full Conversion INR

34 Providing and fixing aluminum Handles ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete .125mm 32 Nos 63.559 Excess(+) Full Conversion INR

35 Providing and fixing aluminum Handles ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete .150mm 6 Nos 76.271 Excess(+) Full Conversion INR

36 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 36 Nos 188.136 Excess(+) Full Conversion INR

37 Construction of brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand), foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. Size 45 x 45 x 45cm deep including PVC manhole cover with frame. 3 Nos 2118.644 Excess(+) Full Conversion INR

38 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes (Triple layer) 500 LTR 7.669 Excess(+) Full Conversion INR

39 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc

39.01 PN-16 pipe , 25mm OD 10 Rm 364.407 Excess(+) Full Conversion INR

39.02 PN-16 pipe , 32mm OD 5 Rm 454.237 Excess(+) Full Conversion INR

40 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 1 Nos 423.729 Excess(+) Full Conversion INR

41 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 2 Nos 508.475 Excess(+) Full Conversion INR

42 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 5 Nos 508.475 Excess(+) Full Conversion INR

43 Providing and fixing of water heater (geyser) of 50 LTR capacity including all fittings, connections, and fixtures etc of approved make complete 1 Nos 14830.508 Excess(+) Full Conversion INR

44 Supply and installation of water pump 0.5 HP of approved brand incl cost of fittings and electrical cabling etc. 1 No. 4237.288 Excess(+) Full Conversion INR

45 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 1 No. 2860.169 Excess(+) Full Conversion INR

46 Providing and fixing of CP brass Wall Mixer of Approved quality incluing all fittings and fixtures complete. 1 No. 2966.102 Excess(+) Full Conversion INR

47 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 1 No. 1292.373 Excess(+) Full Conversion INR

48 Providing and fixing Towel rail of approved brand C.P. brass 600 x20 mm together with a pair of each CP brass brackets to fit the size of towel rail including all fittings and fixtures complete 1 No. 641.076 Excess(+) Full Conversion INR

49 Providing and fixing of PTMT Soap Case of approved brand including all fittings and fixtures complete 1 No. 201.636 Excess(+) Full Conversion INR

50 Providing and fixing of PTMT Gratings of approved brand including all fittings and fixtures complete 1 No. 211.864 Excess(+) Full Conversion INR

51 Providing and fixing of Connection Pipes of approved brand including all fittings and fixtures complete (450mm) 6 No. 100.644 Excess(+) Full Conversion INR

52 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade 60x45cm 1 Nos 1016.949 Excess(+) Full Conversion INR

53 Providing and fixing of CP brass Health Faucet with connecting pipes of approved brand including all fittings and fixtures complete 1 No. 1016.949 Excess(+) Full Conversion INR

54 Providing and fixing of High pressure PPR gate valve of approved brand including all fittings and fixtures complete 2 No. 296.61 Excess(+) Full Conversion INR

55 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 1 Nos 4815.254 Excess(+) Full Conversion INR

56 Providing and fixing of following PVC fittings and items of approved make (incluing all fittings and fixtures etc)

56.01 PVC Pipe (B type ) 100mm 15 RM 338.983 Excess(+) Full Conversion INR

56.02 PVC Pipe (B type ) 75mm 10 RM 296.61 Excess(+) Full Conversion INR

56.03 Door Tee 100mm 2 Nos 186.441 Excess(+) Full Conversion INR

56.04 Collar 100mm 6 Nos 76.271 Excess(+) Full Conversion INR

56.05 Reducer 100x75mm 2 Nos 113.559 Excess(+) Full Conversion INR

56.06 Floor trap 75mm 2 Nos 182.203 Excess(+) Full Conversion INR

56.07 Plain bend 100mm 5 Nos 127.119 Excess(+) Full Conversion INR

56.08 Plain Bend 75mm 5 Nos 84.746 Excess(+) Full Conversion INR

56.09 Door bend 100mm 2 Nos 127.119 Excess(+) Full Conversion INR

56.1 Door bend 75mm 2 Nos 97.458 Excess(+) Full Conversion INR

56.11 P Trap 100mm 1 Nos 127.119 Excess(+) Full Conversion INR

56.1200000000001 Plain Tee 75mm 3 Nos 148.305 Excess(+) Full Conversion INR

56.1300000000001 Plain Tee 100mm 4 Nos 110.169 Excess(+) Full Conversion INR

57 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. 18 mm thick 2.6 Sqm 3622.881 Excess(+) Full Conversion INR

58 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade all as per the directions of Engineer Incharge with all carriages complete 1.86 Sqm 1077.542 Excess(+) Full Conversion INR

59 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. (anti skid) in all colours 2.32 Sqm 971.068 Excess(+) Full Conversion INR

60 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm all as per the directions of Engineer Incharge with all carriages complete 19.45 Sqm 1144.068 Excess(+) Full Conversion INR

61 Providing and fixing of 25mm medium class PVC conduits for electirc wiring including junction boxes and other necessary fittings complete 20 RM 72.034 Excess(+) Full Conversion INR

62 Providing and fixing Light deep box in slabs of standard make and size along with accessories complete 8 Nos 63.559 Excess(+) Full Conversion INR

63 Providing and fixing Fan deep box in slabs of standard make and size along with accessories complete 1 Nos 84.746 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words