ADDN / ALTN OF TOILET BLOCK AND OTHER B/R WORKS IN HQ CE GANDHINAGAR AND ADDN / ALTN OF SANITARY FITTINGS AT OFFICER MESS AT VSN CHILODA UNDER GE (AF) CHILODA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces of wall and applying two coat of distemper oil emulsion over chalk whiting complete all as specified and as directed by Engr-in-Charge.

M&L for preparing new surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick plastering on brick/PCC block masonry or concrete surfaces finished even and fair (with out using extra cement) in CM 1: 3 on ceiling as complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion over chalk whiting complete all as specified and as directed by Engr-in-Charge.

M&L for complete removal of existing treatment of ceiling and three coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

M&L for Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 SQM not exceeding 3.00 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc and including screed bed 20mm thick in CM (1:6) complete all as specified and directed.

All as per item No 11 here in before but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed.

Demolition of Brickwork built in cement morter including work all quoins, aches, pillars, etc, complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed.

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S & F in repair vitreous china 520mm x 360mm X 390mm snow white wash down water closet pan (pedestal pattern) s type (excluding fixing bolts, flushing cistern) with flush pipe and seat cover complete all as specified and directed. Make :- CERA S1057101 and seat cover B1510121 or equivalent as approved by GE.

S&F in repairs Vitreous China urinals 375mm x 390mm x 590mm snow white in colour,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including brass screws, pointing around urinal back in cement including fitting such as spreader and outlet discharge pipe, coupling complete all as specified and directed. Make- CERA S4020112 or equivalent as approved by GE.

S&F in repairs for twin flush flushing cistern, low level, snow white, with inlet, ball calve, float and handle including brackets, flush pipe and fittings complete all as specified and directed. Make- CERA B1020106 or equivalent as approved by GE.

S&F vitreous china white thin rim table wash hand basin 550 mm x 400 mm x 140mm including all necessary fitting such as CP waste coupling 32mm dia ,bottle trap and other misc fitting including taking down old wash hand basin complete all as specified and directed. Make :- CERA S2020137 or equivalent as approved by GE.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per item No 21 here in before but 600mm length.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches or on wallls upto 150mm in dia, if required complete all as specified and directed by Engr-in-charge.

S&F 75mm dia of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid to wall complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (single T) complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC (SWR) couplers complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm, setting and jointed with solvent cement complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid to wall complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single, (single T) complete all as specified and directed.

S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm PVC (SWR) couplers complete all as specified and directed.

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) two track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 61.85 x 31.75 x 1.50 mm ( Section No 20829) (b) Frame (bottom) section shall of size 61.85 x 31.75 x 1.50 mm ( Section No 20830) (c) Top & side Members of shutter Section shall be be of size 18.00 x 52.00 x 1.55 mm (Section No.20750) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736)

Taking up or down steel tubing and connections and removal out side MD land for 15 mm bore of pipe complete all as specified and directed.

S&F 16mm outer dia CPVC pipes SDR 11water tubing incl all tube fittings and fixtures such as tees, elbows,diminishing pieces etc. complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections and removal out side MD land for 20 mm bore of pipe complete all as specified and directed.

S&F 20mm outer dia CPVC pipes SDR 11water tubing incl all tube fittings and fixtures such as tees, elbows,diminishing pieces etc. complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F Bib tap cast copper alloy 15mm bore high pressure fancy type, screwed both ends for iron pipe for brass ferrule and fixed complete all as specified and directed. Make:- CERA F2008151 or equivalent as approved by GE.

S&F 15mm bore Stop valve, cast copper alloy screwed down high pressure, fancy type, screwed both ends (externally threaded) for iron pipe or for union and fixed of sizes complete all as specified and directed. Make:- CERA F1015201 or equivalent as approved by GE.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make:- CERA F2008103 or equivalent as approved by GE.

Taking down chowkhat or frame with shutter (w/o taking of shutter from the frame) area not exceeding 1.5 Sqm each complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed.

S&F 100 mm cold rolled SS butt hinges, medium weight complete all as specified and directed.

S&F Aluminium handle cast type, anodised 150 long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy, aldrop bolt 250mm long complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

S & F in repairs hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete all as specified and directed. Make:- CERA F 8030105 AB or equivalent as approved by GE.

S & F in repairs Chromium plated 20 mm dia tubular towel rail 'D' type 450 mm long including taking down old towel rail complete all as specified and as directed. Make - CERA F5013104CH or equivalent as approved by GE.

S&F 15 mm size Two way bib tap with wall flange complete all as specified and directed. Make CERA F 1015163 or equivalent as approved by GE.

S & F in repairs grating doom 150 x 150 mm of brass chromium plated, including taking down old grating doom complete all as specified and directed.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make- CERA F5013109CH or equivalent as approved by GE.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 4.0mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S & F aluminium powder coated min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperturer with 25x3 mm thick aluminium strip with screw to upper half portion of ventilitor all fitting & fixture and fixed in position including taking down of old ventilator complete all as specified and directed.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise complete all as specified and directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in counter washbasin platform complete all as specified and directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L of demolishing cement concrete in sunken floor slab upto 450mm and applying One coat of cold applied bituminous primer @ 250 grams/Sqm on plastered surfaces including sidewalls. Thereafter a layer of APP modified membrane (3mm thickness) in sunken portion over side walls up to the finished floor level shall be plastered with 15 mm thick in cement mortar (1:4), mixed with water proofing compound at the rate of 3% by weight of cement and filling and mass concrete PCC 1:5:10 type E2 using 40 mm aggregate complete all as specified and directed with 3% WPC to weight of cement after satisfactory testing of CI pipes/joints and slab/walls by filling water for 72 hours and removing demolished material outside MD land complete all as specified and directed. Note:- Pipe / Nahani /floor trap / tiles / taking down to saintary fittings etc to be measured and paid separately.

Taking down chowkats with shutters of size exc 1.5 sqm but n exc 4.00 sqm, each (without taking off shutters from the frames) complete all as specified and directed.

S & F 12mm thick toughned glass door including necessary accessories for door i.e. floor spring, Top pivot, bottom patch, top patch, patch lock, 'H' type handle approved by GE complete all as specified and directed.

S & F froasted film of 50 micron to glass panes exc 1.5 sqm as per instructions of manufacturer complete all as specified and directed.

S&F opal prime tall boy sensor faucet for wash basin with pre-mixed water supply kit (battery operated) complete all as specified and directed. (Make : Jaquar Cat part No SNR-15017PMPK or Equivalent as approved By GE)

S&F sensor concealed type flushing valve for urinal complete set with installation box with control cock (battery operated) complete all as specified and directed. (Make : Jaquar Cat part No SNR-STL-51087 or Equivalent as approved By GE)

M&L for anodised aluminium snap grid frame work of size (605mm X 605mm ) using T grid/Cross-T/Wall angle/level clip & suspenders for false ceiling and similar works including hangers 6mm dia. G.I. wire (upto 1200 mm length) size of grid (605 mm X 605 mm ) adjusting level fixed to roof slabs/trusses by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-charge.

S & F false ceiling 8 to 10mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film fixed complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully copper/ aluminum point wiring (light, fan, socket, power and bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder, regulators, sockets light fittings etc, removing material to store for keeping in safe custody or for taking credit, and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through metallic rigid/ PVC heavy duty concealed conduit/ casing capping/ open conduit with 1.5 Sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories, box made from not less than 1.6mm GI sheet factory made complete all as specified and as directed by Eng-in-Charge for one light/bell/fan point controlled by one switch complete.

All as per item No 74 here in before but One 3 pin socket out let 5 Amps on the independent board.

All as per item No 74 here in before but One 3 Pin socket out let 5 Amps on the same board.

Supply and fixing in repair Modular switch one way 6A, 1 Module complete all as specified and directed.

Supply and fixing in repair Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix in repair ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed.

M&L in repair of sub main wiring complete with PVC insulated FRLS cable of single core 2.5 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit/ casing capping with accessories incl 2.5 Sqmm unsheathed multi standard FRLS copper conductor as earth wire complete all as specified and directed. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length.

S&F in repair/ replacement casing capping patti of size upto 50 MM dia including all its tee, bends etc of white/ ivory/ gray colour complete all as specified and as directed by Eng-in-Charge.

Supply and fixing in repair sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links (without MCB's) 08 ways SPN complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links (without MCB's) 04 ways SPN complete all as specified and directed.

Supply and fixing in repair MCB, SPN 240 volts, 40 Amps capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair MCB, SPN 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for LED tube light fittings 1x 18W, 230V, wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser and integrated electronic driver complete with all accessories internally pre wired complete all as specified and directed.

Supply and fixing in repair for LED light fittings 1x 10W, single side connection 230V, wall mounted LED type, complete with all accessories internally pre wired complete all as specified and directed.

Taking down exhaust fan of any size and any type as existing, dismantling fan blade, dismantling electric connection complete all as specified and directed. Note : Submit complete fan after dismantling to MES store.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0mm dia by bolts, nuts, check nuts and washers of glavanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicating including testing on completion complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan 300 mm sweep silent type in PVC Body as required at site complete all as specified and directed by Eng-In-Charge. Note : This item includes rates of making hole for exhaust fan fixing as per size and resurfacing with clean look.

Shree Builders (BID ID -3161895)

divyarsh entrprise (BID ID -3161884)