GE/J/A 2021-22 (9012/E8)

Amount

B/R Works:- Excavating in post holes each n exc 0.5 cum , getting out in any type of soil ,returning filling in and ramming earth or broken rubble mixed with earth around, in layers nt exc 25cm ,watering and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and as directed.

Cement concrete in foundations ,filling and mass concrete type D2 1:4:8(40 mm graded aggregrate) as in post hole, complete all as specified and as directed

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

MS bars 10mm dia and over, cut to length,bent to shape required, including crankin bending spirallyu for hooping for columns, hooking ends and binding with and icl mildsteel wire annealed not less than0.9mm dia or securing with clips quality conforming to grade FE-410, complete all as specified and as directed.

Mild Steel Screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends,each screwed ends to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5 cm bt n exc 30cm long, complete all as specified and as directed.

Fixing only Chain link fencing including line wires , any mesh, size and type to any type of standards,rails,straining bolts etc including provision of binding wire, complete all as specified and as directed.

Supply only Chain Link MS galvanised fencing any size or type exc 4kg weight per sqm, complete all as specified and as directed.

Two coats of synthetics enamel paint on steel surfaces over one coat of red oxide primer incl preparation of new steel surfaces, complete all as specified and as directed.

Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbed at 75mm spacings and straing and fixing to any type of standard rail straining bolt including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pine etc, complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and as directed.

75mm thick Cement concrete (1:4:8) type D- 2, using 40mm storn aggregate as in sub base, complete all as specified and as directed.

Machine made precast cement concrete curb stone blocks using cement concrete 1:3:6 type C1 (20mm stone agg), complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and as directed.

Plain cement concrete 1:3:6 C2 using 40 mm graded crushed stone agg as in foundations filling and mass concrete , complete all as specified and as directed.

Concrete bed in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) to drain pipe 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately), complete all as specified and as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe, complete all as directed

Supply and laying of RCC drain pipe 200 mm dia class NP-2 laid and jointed complete with collars, complete all as specified and as directed.

Returning , filling in soil (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for remaval of debirs to a distance n exc 50mtrs and depositing where directed complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as directed

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and as directed.

15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement, complete all as specified and as directed.

15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement, complete all as specified and as directed.

Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as asked 150mm dia, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

50 mm thick PCC (1:3:6) type C1 usig 20mm gradde aggregate as in plinth protection, complete all as specified and as directed.

110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp as per dierction of Engineer-in-Charge

110mm dia PVC (SWR)(heavy duty) pipes single socketd in any length with rubber rings joints laid in trenches or in floors, complete all as specified and as directed.

75 mm PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors, complete all as specified and as directed.

75 mm PVC SWR pipes single socketd in any length with rubber rings joints laid in wall and fixed with MS clamp as per dierction of Engineer-in-Charge

PVC (SWR) branch pieces single socketed Y equal or unequal 110mm, complete all as specified and as directed.

PVC (SWR) bends any radius 110mm, complete all as specified and as directed.

PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and as directed.

PVC SWR vent cowl 110mm, complete all as specified and as directed.

PVC SWR vent cowl 75mm, complete all as specified and as directed.

75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

Cleaning/Removal of sewage block line with cleaning machine shall be hired from state municipal corporation in the existing line incl cleaning of complete line laid at any depth and at any location between Two consecutive manhole to manhole incl testing the pipe by pouring water from manhole to the entire satisfaction of Engr-in-Charge for 150mm bore SGSW/RCC Pipe, complete all as directed.

All as per above item No 42 but 200mm bore SGSW/RCC Pipe.

All as per above item No 42 above but 300mm bore SGSW/RCC Pipe.

50mm, 75mm to 100mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover, gully trap chhaja etc., complete all as specified and as directed.

Pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and finishing the surface as per clause 4.11.16 and MES SSR-1991 Part-1, complete all as specified and as directed.

Snap grid frame work of powder coated pre-fabricated GI channel for false ceiling of size 600x600mm with ceiling board PVC laminated Gypsum board 8mm thick and fixed as per maufacture instructions incl as per sample kept in GE office, complete all as specified and as directed.

Dismantling wall & ceiling boards/slabs/blankets etc; any thickness including cover fillets, complete all as directed.

25mm thick cement concrete type B1 (1: 2: 4) using 20mm graded aggregate as in floor, complete all as specified and as directed.

Non skid coloured ceramic tiles 300x300mmx7mm thick in floors set and jointed in neat cement slurry and bedding layer of mortar in 1:6, complete all as specified and as directed.

Glazed colour ceramic tiles 1st quality of size 300x450x7mm with highlighter pattern, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles, complete all as specified and as directed. Make: Kajaria/ Orient bell/ Somany

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

10mm thick rendering in CM 1:4 as on ceiling / Chjja/ Ficia, complete all as specified and as directed.

Three coats of white wash on walls including preparation to newly plastered surfaces of walls, complete all as specified and as directed.

Three coats of white wash on ceiling / facia /RCC Chhaja etc including preparation to newly plastered surfaces, complete all as specified and as directed.

Two coat of colour wash over a coat of white wash on newly plastered surfaces of walls after necessary preparation of surfaces, complete all as specified and as directed.

75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in subbase, complete all as specified and as directed.

15mm bore tubes medium grade galvanised, with all fittings and complete to walls and ceiling or laid in floors, complete all as specified and as directed.

20 mm bore tubes medium grade galvanised, with all fittings and complete to walls and ceiling or laid in floors , complete all as specified and as directed.

15mm bore stop valves/angle valve cast copper alloy, screwed high pressure with crutch or butterly handle screwed both ends iron pipe & fixed, complete all as specified and as directed. Make: Jaquar/ Cera

20mm bore stop valves cast copper alloy, screwed high pressure with crutch or butterly handle screwed both ends iron pipe & fixed, complete all as specified and as directed. Make: Jaquar/ Cera

15mm bore bib taps , fency type cast copper alloy with crutch or butter fly handle screed for iron pipe and fixed, complete all as specified and as directed. Make: Jaquar/ Cera

Repairs vitreous china wash down water closet pan EWC fancy type with and including flushing cistern fixed with seat set with S or P trap, complete all as specified and as directed. Make: Parryware/Hindware.

PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6), complete all as specified and as directed.

Preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper, complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.

Cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

All as per above item No 68 but except stone complate all as specified and directed.

Providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4, complete all as specified and as directed.

Providing precast concrete 1:2 :4 type B-1 using 20 mm graded stone aggregate as in RCC jali post setting in mortar 1:6, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate), complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to recievr tiling/floor finish, complete all as specified and as directed.

Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade tile over and incl 15mm thick screed bed or bedding in CM 1:6, complete all as specified and as directed. Make: Kajaria/ Orient bell/ Somany.

All as per above item No 75 but as in skirting/dado over and incl 10mm rendering in CM 1:4, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

Preperartion of newly plastered surfaces on wall and applying two coat of Birla wall putty with fair finished and even surface and applying two coat of plastic emulsion, complete all as specified and as directed.

Preperation of new plastered surface of wall and applying two coat or more coat of Apex ultima over and incl alkaline resistant primer, complete all as specified and as directed.

Complete removal of old surface of wall and applying two coat or more coat of Apex ultima over and incl alkaline resistant primer, complete all as specified and as directed.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete all as directed.

Sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 10cm, complete all as specified and as directed.

All as per above item No. 83 but except Stones complete.

Supply and fixing for mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etct IS with applying one coat of zinc chromate primer, complete all as specified and as directed.

Supply only Integral water proofing compund ISI Marked.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing of removing to store, complete all as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing of removing to store, complete all as directed.

Mild steel galvanized steel tubing with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications complete 15 mm bore, complete all as specified and as directed.

All as per above item No. 89 but 20 mm bore complete.

Fixing only GI tubes any grade 15mm bore to walls and ceiling or in floors etc including provision of new fittings as required (Serviceable galvanised tubes retrieved from respective items shall be laid under these items), complete all as specified and as directed.by Engineer - in - Charge .

All as per above Item No. 91 but for 20mm bore complete.

Disconnecting existing tanks capacity exc 500 & n exc1000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as directed.

Disconnecting existing tanks capacity exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately), complete all as directed.

Welding in repairs exc 2.5 cm but n. exc 5 cm in length thickness of metal n. exc 6mm, complete all as specified and as directed.

Taking down existing old Tar-felt from RCC roof, stone roof in any thicnes etc carefully including cleaning the roof surface by wire/coir brush and remouving all grits, stones, fungus , moss and finally washing down with water to the entire satisfaction of Engr-in-Charge .

Material and labour for PCC (1:3:6) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, filling depression, junction of roof slab & parapets, curbs etc including necessary from work, complete all as specified and as directed.

Roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 0.40 Sqm, complete all as specified and as directed.

Cutting openings through Old masonry walls built in CM 1:4 walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises, complete all as specified and as directed.

Forming jambs, etc., to openings (to foregoing item), including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete with cement mortar 1:4, complete all as specified and as directed.

Making good under cills with cement mortar 1:4 (or over arches, lintels and bressummers) including all pinning as necessary, complete all as specified and as directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved or cornices surface and reinforced with G.I. wire mesh , complete all as specified and as directed.

Complete removal of existing treatment of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds moss and efflorcent salts and trading oil and greasy spot and washing down with water, complete all as specified and as directed.

35mm thick solid core door shutter with tlaminated plyon both face, finished, complete all as specified and as directed.

2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Refixing in same/other opening only of any description exc 1.0 Sqm but not exc 2.0 Sqm each and removing to or from store, complete all as specified and as directed.

Aluminium anodized,tower bolt 200 mm long, complete all as specified and as directed.

Aluminum anodised handle extruded section of size 150mm long, complete all as specified and as directed.

Stainless steel butt hinges 100 mm size, complete all as specified and as directed.

20-22mm thick Granite (table rubbed and polished ) of approved colour in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

10 mm thick tougned glass fixed with aluminum channel S/S hinges fixed with screws as open area and like etc fixed with sutable locking arrangement as per direction of Engr-in-Charge.

110mm PVC (SWR) pipes single socketed in any lengh with rubber ring joints fixed to walls with clits and clips, complete all as specified and as directed.

MS with PVC coated decorative 25mm curtain rod with fixing brackets, knob etc as in repairs, complete all as specified and as directed.

Italy design embossed vinyl wall paper fixed on wall as per sample approved by Engr-in-Charge

All as per above item No. 116 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Supply and laying of RCC drain pipe 150 mm dia class NP-2 laid and jointed complete with collars, complete all as specified and as directed.

Supply and Fix cast iron foot steps/GT cover , not. exc 5 Kg each in manholes/gully trap, complete all as specified and as directed.

100mm dia for Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including cutting of holes wherever required, complete all as specified and as directed.

100mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

PVC SWR pipes single socketd in any length with rubber rings joints laid in wall and fixed with MS clamp as per dierction of Engineer- in-Charge

75mm dia CI spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required, complete all as specified and as directed.

100mm dia CI bends including cutting of holes, complete all as specified and as directed.

100mm dia CI connector of length 30 cms including cutting of holes with lead joints, complete all as specified and as directed.

CI single branch piece 100mm dia, complete all as specified and as directed.

CI double branch piece 100mm dia, complete all as specified and as directed.

75mm dia CI bends including cutting of holes, complete all as specified and as directed.

CI single branch piece 75mm dia, complete all as specified and as directed.

CI double branch piece 75 mm dia, complete all as specified and as directed.

Cleaning/Removal of sewage block line with cleaning machine shall be hired from state municipal corporation in the existing line incl cleaning of complete line laid at any depth and at any location between Two consecutive manhole to manhole incl testing the pipe by pouring water from manhole all as directed to the entire satisfaction of Engr-in-Charge for 150mm bore SGSW/RCC Pipe, complete all as directed.

All as per above item No 131 but 200mm bore SGSW/RCC Pipe.

All as per above item No 131 but 300mm bore SGSW/RCC Pipe.

75mm to 100mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover, gully trap, complete all as specified and as directed.

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds mitred/stopped ends etc, complete all as specified and as directed.

Jodhpur rubbed stone slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3 as in drain cover, complete all as specified and as directed.

Squarred rubble walling Jodhpur type regular coursed, well bonded, bedded and solidly hearted built in CM 1:6 , complete all as specified and as directed.

5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4, complete all as specified and as directed.

Mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

15mm thick rendering in cm 1:6 on block / stone masonry ffinished even and smooth, complete all as specified and as directed.

100mm bore cast iron sand cast soil and vent pipe in any length with or without ears with cement joints laid in wall/trenches or in floors, complete all as specified and as directed.

75mm bore cast iron sand cast soil and vent pipe in any length with or without ears with cement joints laid in wall/trenches or in floors, complete all as specified and as directed.

100mm CI cowl, complete all as specified and as directed.

100mm bore CI bend (any radius) diminishing pieces or tapers, complete all as specified and as directed.

100mm bore CI Tee ordinary or inverted, complete all as specified and as directed.

Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete with outlet dia 75mm , complete all as specified and as directed.

Rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position,of cap 500 Ltrs complete all as specified and as directed. Make: Sintex/ Rotex/ Polyturf

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded, complete all as specified and as directed.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded, complete all as specified and as directed.

3 mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.

Framed work as in gril guard bars and welded to window frames, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

Solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.

150mm long aluminum anodised handle fabricated type, complete all as specified and as directed.

Vitreous china wash basin white flat back 550x400mm including bracket , cp coupling waste pipe & PVC connection, complete all as specified and as directed.

15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks abd fly -nuts screwed for iron pipe and fixed, complete all as specified and as directed.

Vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc, complete all as specified and as directed.

Health faucet 1200mm long flexible tube and wall hook, complete all as specified and as directed.

Hepairs CP towel ring, complete all as specified and as directed.

Supply , laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2lad and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and as directed. (Note- cement concrete used for haunching concrete shall be measured and paid separatly)

Broken stone or boulders Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and as directed.

Sand filling under floors or foundation spreading and levelling in layer n exc 25 cm thick well ramming including watering and consolidation, complete all as specified and as directed.

Roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3m in length, complete all as specified and as directed.

5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in cm 1:4, complete all as specified and as directed.

Non skid ceramic colour joint free tiles 1st quality 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and as directed.

10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc, complete all as specified and as directed.

15mm thick rendering in cm 1:6 on stone masonry finished even and smooth, complete all as specified and as directed.

Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth, complete all as specified and as directed.

GI water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified(a) 25 mm dia, complete all as specified and as directed.

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed.

15 mm dia angular stop cock with chromium plated long thread with flange, complete all as specified and as directed.

PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.

(SWR) guly trap 125/110mm setting and jointing with solvent cement, complete all as specified and as directed.

Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms, complete all as specified and as directed.

150mm long aluminium anodised handle fabricated type, complete all as specified and as directed.

Supply only 10 litres, pvc valveless syphonic action type, flushing cistern high level with inlet ball float valve, complete all as specified and as directed. Make: Parryware/ Hindware/ Cera

15 mm bore CP brass two way angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repair, complete all as specified and as directed.

Bidet spray (Health faucet) with 1 meter PVC tube and holder, complete all as specified and as directed.. Make Jaquar

Vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover with jet spray complete incl fixing of flush pipe etc, complete all as specified and as directed.

S&F chromium plated toilet paper holder, complete all as specified and as directed. Make Johnson Cat No T0254C or equivalent

Vitreous china urinal full stall type colured bowl type (back or corner wall type) complete including providing and fixing plugs, waste pipe 32 mm dia , urinal spreader 15 mm dia ete in cement mortar 1:2 and fixing with and including brass screws 60 mm in length, complete all as specified and as directed. Make: Hindware/ Parryware/ Cera

PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

3 coats of white wash on walls including preparation to newly plastered surfaces of walls, complete all as specified and as directed.

Preperartion of newly plastered surfaces of wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper, complete all as specified and as directed.

Preparation of newly plastered/unplastered surfacce and applying two coats of cement based paint over one coat of Primer on wall, complete all as specified and as directed.

Salt-glazed stoneware drain pipes 150mm dia laid in trenches and jointed, complete all as specified and as directed.

Concrete bed to drain pipes 150mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:3:6 type C-2, complete all as specified and as directed.

Towel rail 450mm long of PTMT fiexd with and including chromium plated brass screws and woodn cleats Min weight 170gms, complete all as specified and as directed. Make Polytuff

Soap dish of PTMT fixed with screws, complete all as specified and as directed.Make Polytuff

MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitred stopped end etc., complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horozontal or slopping) fair finished shurface, complete all as specified and as directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

RCC design mix M-25 using 20 mm graded crushed stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc, complete all as specified and as directed.

RCC design Mix M-25 using 20 mm graded crushed stone aggregate as in beam, plinth beam, roof beam, cantilevers, lintel beam, etc, complete all as specified and as directed.

Mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

Machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of ante abrasive material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand. The compressive strength of block shall not be less than 350 Kg/Cm2, complete all as specified and as directed.

Treatment of soil top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.by Engr-in-Charge.

E/M Works Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc, complete all as directed.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing, complete all as directed.by Engineer-in-Charge.

Taking Down MCB DB Incl MCB/MCCB/ Isolators of any Make, complete all as directed.

Taking Down Electric Meter of any capacity / Make and refixng again on Electrci Wooden Board suitable for existing meter with proper wiring via flexible Conduit /PVC Coundit 25/32 mm with proper Clipping and making fully functional circuit, complete all as directed.

Checking of split type air conditioner indoor unit of any make and capacity (1.5/2 TR ) in location and position at any site in Army Area unit Jodhpur including necessary servicing .ie. electrical connection/wiring, cleaning condenser, blower fan motor servicing including replacement of both end bushes of approved quality cleaning cooling coil, replacement of micro filter of approved quality and testing for proper functioning of split type air conditioner all as directed by Engr-in-Charge.(The rates quoted are deemed to be included for maintaining complete and proper record of machine ie: make with cap and location , date of servicing , user signature after servicing , concerned JEs signature duly verified by the Engr- in-Charge.(b) Greasing /oiling of blower fan mator including charging gas if reqd and cost of gas will be paid seperately under respective item of schedule A, complete all as specified and as directed.

Taking Down Indoor Unit and Outdoor Unit Safely and Discconect Copper Tube ( Suction and Dischage Line) and Relocate new Postion with proper Fastening and Drilling Suitable Hole on Wall with proper finish and connect outddor Unit with Suitable size of Suction and Dischage Line and Refill Gas as per existing and connect properly via soldering and Misc Work etc incl pressuring the complete unit with Suitable Gas as per directed by Engineer in Charge

Providing nylon insulation on discharge and suction pipe of split unit ACs in existing location and position including . NOTE: Rates are deemed to be measured as single length for one suction and discharge, complete all as specified and as directed.

Material and labour for replacement of copper discharge tube of size 3/8" duly nylon insulated, complete all as specified and as directed. by Engineer -in-Charge.

Material and labour for replacement of copper suction tube of size 5/8" duly nylon insulated, complete all as specified and as directed. by Engineer -in-Charge.

Material and labour for replacement of cord less remote with control panel suitable for split type AC Cap 1.5/2.0 Ton. Note : Make of remote shall be all as per existing, complete all as specified and as directed.

Supply only refrigerant gas M- 404/444/R22, Make:Maffron/Floron ( Note : (i) The gas is to be supplied in cylinder duly sealed by manufacturer/ factory sealed with proper PVs and other documents, complete all as specified and as directed.

M&L for replacement of canopy /shed structure of split type AC Out door unit fabricated from 35x35x5 mm equal angle and MS flat of suitable size including bending and welding work and fixing /grouting of roof including painting with two coats of paint over a coat of red oxide etc, complete all as specified and as directed.

Point wiring (Concealed) using approved colour coding as per IS Red Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated with copper lugs( Pin & U Shape) as per suitable size and unsheathed FR LS cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for wall/roof /floor etc with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to commonearth and connecting to earrth dolly, complete all as specified and as directed. for the follwing (a) One light point/Fan Point/Exhaust fan controlled by one, one way switch

(b) One socket outlet 3 pin 6 Amp on independent board

(c) One Socket outlet 3 Pin 6 Amp on Same Board

All as per above item No. 216 but with 4.0 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.

Modular switch flush type single pole one way 5 Amp ISI Marked, complete all as specified and as directed. Make:Legrand/L&T/Schneider

Modular switch flush type single pole one way 15 Amp ISI Marked, complete all as specified and as directed. Make : Make:Legrand/L&T/Schneider

Modular socket outlet 2 in 1, 5 pin, 5 Amp flush type, complete all as specified and as directed. Make:Legrand/L&T/Schneider

Modular socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked., complete all as specified and as directed. Make:Legrand/L&T/Schneider

Supply and fix modular socketed stepped type electonic fan regulator flush type, complete all as specified and as directed.Make:Legrand/L&T/Schneider

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable, complete all as specified and as directed. Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S.

Surface mounting LED Luminaries and 1 x 9 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size, complete all as specified and as directed. Make : CG, Phillips, Wipro

Repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

Repairs sub main wiring with 4.00 Sq mm single core multistrandred copper conductor PVC insulated (FR ) and unsheathed cable passing through in and including PVC conduit medium grade compleate with all acessories concealed in wall and making good the distrurbed surface of wall incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm and one run of conduit shall be measured as unit length, complete all as specified and as directed.

Supply and fixing of sheet metal enclosure SPN with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated Al conductor with an inner sheathing PVC tape ,armoured galvanised steel strip or wire armoured, electric cable of size 50 sq mm 3.5 core, complete all as specified and as directed.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR LS PVC insulated copper conductor, single core cable in surface in PVC casing capping / Concealed Conduit as required, complete all as specified and as directed. (a) 2x1.5sqmm+1x1.0 sqmm earth wire

(b) 2x2.5sqmm+1x1.5 sqmm earth wire

(c) 2x4.0sqmm+1x2.5 sqmm earth wire

(d) 2x6.0sqmm+1x4.0 sqmm earth wire

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.

Supply and laying GI pipe 50 mm bore medium grade ISI marked with new GI fitting laid in trenches, complete all as specified and as directed. (Note : Rates inclusive of all fittings such as Tee, Bends,Socket, Reducers, Flanges etc required at site)

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light point controlled by one, one way switch

Switch flush type single pole one way 6 Amp ISI Marked, complete all as specified and as directed.

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable, complete all as specified and as directed. Make :Crompton/ Havells/ Bajaj.

Insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked, complete all as specified and as directed.

Connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complete all as specified and as directed. MAKE;- Havell,s/ Philips/ CG.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface, complete all as specified and as directed.

MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked, complete all as specified and as directed.

MCB SPN 40 Amp, 10 kA, ISI Marked, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 10 sq 2 core in service connection, complete all as specified and as directed. Make polycab/Havells/Finolex

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Narendra General Suppliers

M/S KAUTILYA GARG

Harsh Enterprises